This API allows setting a launch secret within a guests's memory. The
launch secret is created by the guest owner after retrieving and
verifying the launch measurement with virDomainGetLaunchSecurityInfo.
The API uses virTypedParameter for input, allowing it to be expanded
to support other confidential computing technologies. In the case of
SEV, a basic guest launch workflow is described in the SEV API spec
in section "1.3.1 Launch"
https://www.amd.com/system/files/TechDocs/55766_SEV-KM_API_Specification.pdf
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are limits on the number of SEV/SEV-ES guests that can
be run on machines, which may be influenced by firmware
settings. This is important to expose to users.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Three more parameters are required in order that clients can
perform a launch attestation on the SEV guest.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Non-shared storage migration of guests which are disk I/O intensive and
have fast local storage may actually never converge if the guest happens
to dirty the disk faster than it can be copied.
This patch introduces a new flag
'VIR_MIGRATE_NON_SHARED_SYNCHRONOUS_WRITES' which will instruct
hypervisors to synchronize local I/O writes with the writes to remote
storage used for migration so that the guest can't overwhelm the
migration. This comes at a cost of decreased local I/O performance for
guests which behave well on average.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using whitespace to align the '=' and values doesn't make sense for the
virDomainMigrateFlags enum as the visual block is interrupted by
comments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when the destination storage is slower than the normal VM
storage and the VM does intensive I/O to the disk a block copy job may
never converge.
Switching it to synchronous mode will ensure that all writes done by the
guest are propagated to the destination at the cost of slowing down I/O
of the guest to the synchronous speed.
This patch adds the new API flag and implements virsh support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
* XML serialization and deserialization of PCI VPD;
* PCI VPD capability flags added and used in relevant places;
* XML to XML tests for the added capability.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
This patch makes the descriptions of virStoragePoolCreateFlags annotate to the
correct flag in the generated HTML file.
Signed-off-by: Robin Lee <cheeselee@fedoraproject.org>
As advertised in previous commit, this event is delivered to us
when virtio-mem module changes the allocation inside the guest.
It comes with one attribute - size - which holds the new size of
the virtio-mem (well, allocated size), in bytes.
Mind you, this is not necessarily the same number as 'requested
size'. It almost certainly will be when sizing the memory up, but
it might not be when sizing the memory down - the guest kernel
might be unable to free some blocks.
This current size is reported in the domain XML as an output
element only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new API creates network with given flags.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These two public APIs are implemented for almost all other objects that
have a concept of persistent definition and activatability. Now that we
have node devices (mdevs) that can be defined and inactive, it will be
useful to query the persistent/active state of node devices as well.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will allow persistent mediated devices to be configured to be
restarted automatically when the host reboots.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This new API allows to define network with given flags.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This new API function allows to define nwfilter with given flags.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Cloud-Hypervisor is a KVM virtualization using hypervisor. It
functions similarly to qemu and the libvirt Cloud-Hypervisor driver
uses a very similar structure to the libvirt driver.
The biggest difference from the libvirt perspective is that the
"monitor" socket is seperated into two sockets one that commands are
issued to and one that events are notified from. The current
implementation only uses the command socket (running over a REST API
with json encoded data) with future changes to add support for the
event socket (to better handle shutdowns from inside the VM).
This patch adds support for the following initial VM actions using the
Cloud-Hypervsior API:
* vm.create
* vm.delete
* vm.boot
* vm.shutdown
* vm.reboot
* vm.pause
* vm.resume
To use the Cloud-Hypervisor driver, the v15.0 release of
Cloud-Hypervisor is required to be installed.
Some additional notes:
* The curl handle is persistent but not useful to detect ch process
shutdown/crash (a future patch will address this shortcoming)
* On a 64-bit host Cloud-Hypervisor needs to support PVH and so can
emulate 32-bit mode but it isn't fully tested (a 64-bit kernel and
32-bit userspace is fine, a 32-bit kernel isn't validated)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
QEMU gained support for 'win-dmp' format in it's release of 3.0,
but libvirt doesn't implement it yet. Fortunately, there not much
needed: new value to virDomainCoreDumpFormat public enum, which
unfortunately means that QEMU driver has to be updated in the
same commit, because of VIR_ENUM_IMPL().
Luckily, we don't need any extra QEMU capability - the code
already checks supported formats via
'query-dump-guest-memory-capability' just before issuing
'dump-guest-memory'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The comment to virDomainCoreDumpFormat enum says that new values
can be introduced in the future "as new events are added". Well,
it should have been "formats" instead of "events", obviously.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This allows users to restrict memory nodes without setting any specific
memory policy, then 'restrictive' mode is useful.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Follow best practices and add a unsigned int flags parameter to these
new APIs that have not been in a release yet.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This new API function provides a way to start a persistently-defined
mediate device that was defined by virNodeDeviceDefineXML() (or one that
was defined externally via mdevctl)
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This interface allows you to undefine a persistently defined (but
inactive) mediated devices. It is implemented via 'mdevctl'
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
With mediated devices, we can now define persistent node devices that
can be started and stopped. In order to take advantage of this, we need
an API to define new node devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since a mediated device can be persistently defined by the mdevctl
backend, we need additional lifecycle events beyond CREATED/DELETED to
indicate that e.g. the device has been stopped but the device definition
still exists.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It doesn't make sense to list all of the flag values in the function
documentation. This is unnecessary duplication, we already refer to the
enum type. Also, remove reference to exclusive groups of flags, since
that does not apply to this API.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add two flag values for virConnectListAllNodeDevices() so that we can
list only node devices that are active or inactive.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Extend dirtyrate statistics for domGetStats to display the information
of a domain's memory dirty rate produced by domainStartDirtyRateCalc.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce virDomainStartDirtyRateCalc API for start calculation of
a domain's memory dirty rate with a specified time.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This API allows fetching a list of informational messages recorded
against the domain. This provides a way to give information about
tainting of the guest due to undesirable actions/configs, as well
as provide details of deprecated features.
The output of this API is explicitly targetted at humans, not
machines, so it is inappropriate to attempt to pattern match on
the strings and take action off them, not least because the messages
are marked for translation.
Should there be a demand for machine targetted information, this
would have to be addressed via a new API, and is not planned at
this point in time.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since Hyper-V allows multiple VMs to be created with the same name,
some commands produce unpredictable results due to
hypervDomainLookupByName's WMI query selecting the wrong domain.
For example, this prevents `virsh dumpxml` from outputting XML for the
wrong domain.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support to filter by 'ap_matrix' capability.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add support to filter by 'ap_card' and 'ap_queue' capabilities.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
When introducing the API I've mistakenly used 'int' type for
@nkeys argument which does nothing more than tells the API how
many items there are in @keys array. Obviously, negative values
are not expected and therefore 'unsigned int' should have been
used.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When setting up a new guest or when a management software wants
to allow access to an existing guest the
virDomainSetUserPassword() API can be used, but that might be not
good enough if user want to ssh into the guest. Not only sshd has
to be configured to accept password authentication (which is
usually not the case for root), user have to type in their
password. Using SSH keys is more convenient. Therefore, two new
APIs are introduced:
virDomainAuthorizedSSHKeysGet() which lists authorized keys for
given user, and
virDomainAuthorizedSSHKeysSet() which modifies the authorized
keys file for given user (append, set or remove keys from the
file).
It's worth nothing that while authorized_keys file entries have
some structure (as defined by sshd(8)), expressing that structure
goes beyond libvirt's focus and thus "keys" are nothing but an
opaque string to libvirt.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The enum constant names should all have a prefix that matches the enum
name. VIR_DOMAIN_CHECKPOINT_REDEFINE_VALIDATE was missing the "CREATE_"
part of the name prefix.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a flag which will allow users to perform hypervisor-specific
validation when redefining the checkpoint metadata. This will allow
checking metadata which is stored e.g. in disk images when populating
the libvirt metadata.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This code will be used to signal cases when the checkpoint is broken
either during backup or other operations where a user might want to make
decision based on the presence of the checkpoint, such as do a full
backup instead of an incremental one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current udev node device driver ignores all events related to vdpa
devices. Since libvirt now supports vDPA network devices, include these
devices in the device list.
Example output:
virsh # nodedev-list
[...ommitted long list of nodedevs...]
vdpa_vdpa0
virsh # nodedev-dumpxml vdpa_vdpa0
<device>
<name>vdpa_vdpa0</name>
<path>/sys/devices/vdpa0</path>
<parent>computer</parent>
<driver>
<name>vhost_vdpa</name>
</driver>
<capability type='vdpa'>
<chardev>/dev/vhost-vdpa-0</chardev>
</capability>
</device>
NOTE: normally the 'parent' would be a PCI device instead of 'computer',
but this example output is from the vdpa_sim kernel module, so it
doesn't have a normal parent device.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
