This enables booting interactive GRUB menus (e.g. install CDs) with
libvirt-bhyve.
Caveat: A terminal other than the '--console' option to 'virsh start'
(e.g. 'cu -l /dev/nmdm0B -s 115200') must be used to connect to
grub-bhyve because the bhyve loader path is synchronous and must occur
before the VM actually starts.
Changing the bhyveProcessStart logic around to accommodate '--console'
for interactive loader use seems like a significant project and probably
not worth it, if UEFI/BIOS support for bhyve is "coming soon."
We still default to bhyveloader(1) if no explicit bootloader
configuration is supplied in the domain.
If the /domain/bootloader looks like grub-bhyve and the user doesn't
supply /domain/bootloader_args, we make an intelligent guess and try
chainloading the first partition on the disk (or a CD if one exists,
under the assumption that for a VM a CD is likely an install source).
Caveat: Assumes the HDD boots from the msdos1 partition. I think this is
a pretty reasonable assumption for a VM. (DrvBhyve with Bhyveload
already assumes that the first disk should be booted.)
I've tested both HDD and CD boot and they seem to work.
To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()
Update bhyveBuildDiskArgStr to support volumes:
- Make virBhyveProcessBuildBhyveCmd and
virBhyveProcessBuildLoadCmd take virConnectPtr as the
first argument instead of bhyveConnPtr as virConnectPtr is
needed for virStorageTranslateDiskSourcePool,
- Add virStorageTranslateDiskSourcePool call to
virBhyveProcessBuildBhyveCmd and
virBhyveProcessBuildLoadCmd,
- Allow disks of type VIR_STORAGE_TYPE_VOLUME
Add support for CDROM devices for bhyve driver using
bhyve(8)'s 'ahci-cd' device type.
As bhyve currently does not support media insertion at runtime,
disallow to start a domain with an empty source path for cdrom
devices.
https://bugzilla.redhat.com/show_bug.cgi?id=1122205
Although the edits were changing in-memory XML, it was not flushed
to disk; so unless some other action changes XML, a libvirtd restart
would lose the changed information.
* src/conf/domain_conf.c (virDomainObjSetMetadata): Add parameter,
to save live status across restarts.
(virDomainSaveXML): Allow for test driver.
* src/conf/domain_conf.h (virDomainObjSetMetadata): Adjust
signature.
* src/bhyve/bhyve_driver.c (bhyveDomainSetMetadata): Adjust caller.
* src/lxc/lxc_driver.c (lxcDomainSetMetadata): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata): Likewise.
* src/test/test_driver.c (testDomainSetMetadata): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Try to reconnect to the running domains after libvirtd restart. To
achieve that, do:
* Save domain state
- Modify virBhyveProcessStart() to save domain state to the state
dir
- Modify virBhyveProcessStop() to cleanup the pidfile and the state
* Detect if the state information loaded from the driver's state
dir matches the actual state. Consider domain active if:
- PID it points to exist
- Process title of this PID matches the expected one with the
domain name
Otherwise, mark the domain as shut off.
Note: earlier development bhyve versions before FreeBSD 10.0-RELEASE
didn't set proctitle we expect, so the current code will not detect
it. I don't plan adding support for this unless somebody requests
this.
Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
So far, we only report an error if formatting the siblings bitmap
in NUMA topology fails.
Be consistent and always report error in virCapabilitiesFormatXML.
The new VIR_CONNECT_COMPARE_CPU_FAIL_INCOMPATIBLE flag for
virConnectCompareCPU can be used to get an error
(VIR_ERR_CPU_INCOMPATIBLE) describing the incompatibility instead of the
usual VIR_CPU_COMPARE_INCOMPATIBLE return code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When CPU comparison APIs return VIR_CPU_COMPARE_INCOMPATIBLE, the caller
has no clue why the CPU is considered incompatible with host CPU. And in
some cases, it would be nice to be able to get such info in a client
rather than having to look in logs.
To achieve this, the APIs can be told to return VIR_ERR_CPU_INCOMPATIBLE
error for incompatible CPUs and the reason will be described in the
associated error message.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For future work we want to get info for not only the free memory
but overall memory size too. That's why the function must have
new signature too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When virBhyveProcessStart() fails, it tries to unload
a guest that could have been already loaded using
bhyveload(8) to make sure not to leave it hanging in memory.
However, we could fail before loading a VM into memory,
so 'bhyvectl --destroy' command will fail and print
an error message that looks confusing to users.
So ignore errors when running this in cleanup.
virBhyveProcessStart() calls bhyveNetCleanup() if it fails. However,
it might fail earlier than networks are allocated, so modify
bhyveNetCleanup() to check if net->ifname is not NULL before
going further with the cleanup.
bhyveBuildNetArgStr() calls virNetDevTapCreateInBridgePort() and
passes tapfd = NULL, but tapfdSize = 1. That is wrong, because
if virNetDevTapCreateInBridgePort() crashes after successfully
creating a TAP device, it'll jump to 'error' label, that
loops over tapfd and calls VIR_FORCE_CLOSE:
for (i = 0; i < tapfdSize && tapfd[i] >= 0; i++)
In that case we get a segfault.
As the bhyve code doesn't use tapfd, pass NULL and set tapfdSize to 0.
Automatically allocate PCI addresses for devices instead
of hardcoding them in the driver code. The current
allocation schema is to dedicate an entire slot for each devices.
Also, allow having arbitrary number of devices.
In a number of places in the bhyve driver, virObjectUnlock()
is called with an arg without check if the arg is non-NULL, which
could result in passing NULL value and a warning like:
virObjectUnlock:340 : Object 0x0 ((unknown)) is not a virObjectLockable instance
* src/bhyve/bhyve_driver.c (bhyveDomainGetInfo)
(bhyveDomainGetState, bhyveDomainGetAutostart)
(bhyveDomainSetAutostart, bhyveDomainIsActive)
(bhyveDomainIsPersistent, bhyveDomainGetXMLDesc)
(bhyveDomainUndefine, bhyveDomainLookupByUUID)
(bhyveDomainLookupByName, bhyveDomainLookupByID)
(bhyveDomainCreateWithFlags, bhyveDomainOpenConsole):
Check if arg is not NULL before calling virObjectUnlock on it.
Add a helper function virBhyveGetDomainTotalCpuStats() to
obtain process CPU time using kvm (kernel memory interface)
and use it to set cpuTime field of the virDomainInfo struct in
bhyveDomainGetInfo().
- do not lose new definition for an active domain
- do not leak oldDef
- do not set dom->id if virDomainSaveConfig() fails
- do not call virObjectUnlock(vm) if vm is NULL
Implement bhyveDomainCreateXML function.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Fix incorrect ATTRIBUTE_NONNULL usage introduced in 17b17565
which caused build failure:
bhyve/bhyve_driver.c:127:48: error: expected ')'
bhyveDriverGetCapabilities(bhyveConnPtr driver ATTRIBUTE_NONNULL)
^
bhyve/bhyve_driver.c:127:27: note: to match this '('
bhyveDriverGetCapabilities(bhyveConnPtr driver ATTRIBUTE_NONNULL)
Pushed under the build breaker rule.
At the beginning of the function we gain a reference to the driver
capabilities. Then, we call format function (*) which if failed, unref
over caps is called. Then, at the end another unref occurs.
* - Moreover, the format was not called over gained caps, but over
privconn->caps directly which is not allowed anymore.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The driver passed as the only argument to the function should never be
NULL so there's no need to check it. After removing it, the whole
function collapses to a single line doing ref over driver
capabilities.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since b15a2bbd we have the new bhyve_capabilities.[ch] files.
However, the copyright is held by both Roman and Semihalf.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
nmdm is a FreeBSD driver which allows to create a pair of tty
devices one of which is passed to the guest and second is used
by the client.
This patch adds new 'nmdm' character device type. Its definition
looks this way:
<serial type='nmdm'>
<source master='/dev/nmdm0A' slave='/dev/nmdm0B'/>
</serial>
Master is passed to the hypervisior and slave is used for client
connection.
Also implement domainOpenConsole() for bhyve driver based on that.
On failures, virBhyveProcessStart() does not cleanup network
interfaces that could be created by virBhyveProcessBuildBhyveCmd(),
which results in a leaked tap device.
To fix that, extract network cleanup code to bhyveNetCleanup()
and use it in cleanup stage of virBhyveProcessStart().
To ease mocking for bhyve unit tests move virBhyveTapGetRealDeviceName()
out of bhyve_command.c to virnetdevtap and rename it to
virNetDevTapGetRealDeviceName().
We use virBhyveTapGetRealDeviceName() to map network interface name
to a real device path, trying to open possible devices and getting
names by ioctl.
Make it skip devices that fail to open with EBUSY because they're
most likely already used by other VMs.
Part of a series of cleanups to use new accessor methods.
* src/bhyve/bhyve_command.c (bhyveBuildDiskArgStr)
(virBhyveProcessBuildLoadCmd): Use accessors.
Signed-off-by: Eric Blake <eblake@redhat.com>
