Also introduces a G_DEFINE_AUTOPTR_CLEANUP_FUNC for virCHMonitor.
Signed-off-by: William Douglas <william.douglas@intel.com>
Reviewed-by: Laine Stump <laine@redhat.com>
It is already being unrefed in virCHMonitorDispose().
Signed-off-by: William Douglas <william.douglas@intel.com>
Reviewed-by: Laine Stump <laine@redhat.com>
In virCHMontiorNew the monitor object was referenced an additional
time incorrectly preventing it from being disposed of, and wasn't
always closed properly on failure.
Signed-off-by: William Douglas <william.douglas@intel.com>
Reviewed-by: Laine Stump <laine@redhat.com>
In virCHMonitorBuildKernelRelatedJson there are two cases of json
value objects being lost after the pointer being redefined. This
change removes the needless redefinition.
Signed-off-by: William Douglas <william.douglas@intel.com>
Reviewed-by: Laine Stump <laine@redhat.com>
When validation like deviceValidateCallback fails, the vm will not be
set and so the call to virDomainObjListRemove will be passed a NULL
pointer causing a segfault. To prevent this add a check that the vm is
defined before calling out to virDomainObjListRemove.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Enable the handler function to find and open the console character
device that will be used by the console API.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
With the console and serial device handling fully functional, allow
the required device types to be specified in the domain
configuration.
The configuration only supports a single serial or console device.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Add functionality to allow libvirt console to connect to the
cloud-hypervisor created PTY associated with a VM by updating the
domain with console path information. This has to be run after the VM
is created by cloud-hypervisor.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Add function to build the the json structure to configure a PTY in
cloud-hypervisor.
The devices themselves still aren't allowed in configurations yet
though.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
The virCHMonitorGet function isn't going to be used outside of the
monitor, so remove the initial declaration and define the function
to be static.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Now that virCHMonitorGet is capable of handling data returned by the
cloud-hypervisor API, make use of this via virCHMonitorGetInfo to call
into the vm.info endpoint.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
The virCHMonitorGet function needed to be able to return data from the
hypervisor. This functionality is needed in order for the driver to
support PTY enablement and getting details about the VM state.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Add and initialize a virChrdevs to the _virCHDomainObjPrivate
structure in order to eventually track the consoles in use by a domain.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Vast majority of device types is not supported by the Cloud-Hypervisor
driver. Simplify the error reporting by using
virDomainDeviceTypeToString.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Instead of trying to match devices passed in based on the monitor
detecting the number of devices that were used in the domain
definition, use the deviceValidateCallback to evaluate if
unsupported devices are used.
This allows the compiler to detect when new device types are added
that need to be checked.
Signed-off-by: William Douglas <william.douglas@intel.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This member is unused (apart from only being set in
virCHDriverConfigNew()), and never freed really (leading to a
memleak).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the chStateInitialize method fails, we call chStateCleanup
which free's all global state. It fails to set the global
'ch_driver' to NULL, however, so a later attempt to open the
cloud hypervisor driver will succeed and then crash attempting
to access freed memory.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We want to use those shared drivers provided by libvirt to avoid
implementing our own.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Wei Liu <liuwe@microsoft.com>
After previous patches, the @ret variable and the 'cleanup'
label are redundant. Remove them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are two variables that can be freed automatically: @cmd
(which allows us to drop explicit virCommandFree() call at the
end of the function) and @help which was never freed (and thus
leaked).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The CH driver needs "cloud-hypervisor" binary. And if none was
found then the initialization of the driver fails as
chStateInitialize() returns VIR_DRV_STATE_INIT_ERROR. This in
turn means that whole daemon fails to initialize. Let's return
VIR_DRV_STATE_INIT_SKIPPED in this particular case, which
disables the CH drvier but lets the daemon run.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
After previous patches, there's not much value in
chExtractVersion(). Rename chExtractVersionInfo() to
chExtractVersion() and have it use virCHDriver directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The only caller, chExtractVersion() passes not NULL. Therefore,
it's redundant to check for NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If chExtractVersionInfo() fails, in some cases it reports error
and in some it doesn't. Fix those places and drop reporting error
from chExtractVersion() which would just overwrite more specific
error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Cloud-Hypervisor is a KVM virtualization using hypervisor. It
functions similarly to qemu and the libvirt Cloud-Hypervisor driver
uses a very similar structure to the libvirt driver.
The biggest difference from the libvirt perspective is that the
"monitor" socket is seperated into two sockets one that commands are
issued to and one that events are notified from. The current
implementation only uses the command socket (running over a REST API
with json encoded data) with future changes to add support for the
event socket (to better handle shutdowns from inside the VM).
This patch adds support for the following initial VM actions using the
Cloud-Hypervsior API:
* vm.create
* vm.delete
* vm.boot
* vm.shutdown
* vm.reboot
* vm.pause
* vm.resume
To use the Cloud-Hypervisor driver, the v15.0 release of
Cloud-Hypervisor is required to be installed.
Some additional notes:
* The curl handle is persistent but not useful to detect ch process
shutdown/crash (a future patch will address this shortcoming)
* On a 64-bit host Cloud-Hypervisor needs to support PVH and so can
emulate 32-bit mode but it isn't fully tested (a 64-bit kernel and
32-bit userspace is fine, a 32-bit kernel isn't validated)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
