This partially reverts commit 5331c4804f.
The original commit mistakenly thought virFileCacheLookup did not set
an error. In fact the only case it doesn't set an error for is when
the cache key is NULL. This in fact the fault of the caller for passing
an invalid cache key, so doesn't need to be handled.
This caller bug was fixed by checking for a NULL binary in the
virQEMUCapsCacheLookupDefault method.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Conver the code to the new approach which uses XPath to fetch known
elements rather than looping through all XML children.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use a switch statement which will not be omitted when adding potential
new types.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit split out formatting of the mdev subsystem
related stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit split out formatting of the vHBA subsystem
related stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split up formatting of the '<address>' element rather that trying to
optimize it with formatting string hacks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit split out formatting of the SCSI subsystem
related stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit split out formatting of the PCI subsystem
related stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate out bits related to USB so that the logic isn't entangled in
multiple conditional statements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the formatter to the new multiple buffer based approach so that
we can easily separate it into formatters per subsys type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commits, modify the hostdev detach code to use
blockdev infrastructure to detach (i)SCSI hostdevs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to command line creation, use the blockdev helpers when
hotplugging an (i)SCSI hostdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In preparation for instantiating (i)SCSI hostdevs via -blockdev,
refactor qemuBuildHostdevSCSICommandLine to use the new infrastructure
which will do it automatically.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add convertor for creating qemuBlockStorageSourceAttachData which will
allow reusing the infrastructure which we have for attaching disks also
for hostdevs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to instantiate hostdevs via -blockdev too. Add a separate
capability for them for a clean transition. The new capability will be
enabled when QEMU_CAPS_BLOCKDEV is present once all code is prepared.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't (re)generate the backend alias (alias of the -drive backend for
now) internally but rather pass it in. Later on it will be replaced by
the nodename when blockdev is used depending on the capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move all (i)SCSI related code into a new function named
'qemuBuildHostdevSCSICommandLine'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now store the alias of the secrets in the status XML so there's no
need to generate it again.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When upgrading from a libvirt which didn't format private data of a
virStorageSource representing an iSCSI hostdev source, we might need to
generate some internal data so that the code still works as if it was
present in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need the alias to deal with hot-unplug of the hostdev. Use
qemuDomainSecretInfoDestroy which clears only the secrets and not the
alias. The same function is used also for handling disk secrets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We store the config of an iSCSI hostdev in a virStorageSource structure.
Parse the private data portion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
iSCSI subsystem hostdevs store the data as a virStorageSource. Format
the private data part of the virStorageSource in the appropriate place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SCSI hostdevs don't have a virStorageSource associated with the backend
in certain cases. Adding a separate field to hold memory for a copy of
the nodename of the storage backend will allow reusing the blockdev
machinery also for SCSI hostdevs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It doesn't make sense to format "discard" when doing a -blockdev backend
of scsi-generic used with SCSI hostdevs. Add a way to skip it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming commit will need to add another flag for the function so
convert it to a bitwise-or'd array of flags to prevent having 4
booleans.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, if we found an interface with an IPv6 address we
did not blindly trust that host is IPv6 capable (as in we can
successfully translate IPv4 addresses) but used getaddrinfo() to
confirm it. Turns out, we have use the same argument for IPv4.
For instance, in an namespace created by the following steps,
getaddrinfo("127.0.0.1", ...) fails (demonstrating by "Socket
TCP/IPv4 Accept" test case failing in virnetsockettest):
unshare -n
ip link set lo up
ip link add dummy0 type dummy
ip link set dummy0 up
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is not much sense trying to disprove host is IPv6 capable
if we know after first round (getifaddrs()) that is is not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virNetSocketCheckProtocols() function is supposed to tell
caller whether IPv4 and/or IPv6 is supported on the system. In
the initial round, it uses getifaddrs() to see if an interface
has IPv4/IPv6 address assigned and then to double check IPv6 it
uses getaddrinfo() to lookup IPv6 loopback address. Separate out
this latter code because it is going to be reused.
Since the original code lived under an #ifdef and the new
function doesn't it is marked as unused - because on some systems
it may be so.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, we've used security_context_t for variables passed
to libselinux APIs. But almost 7 years ago, libselinux developers
admitted in their API that in fact, it's just a 'char *' type
[1]. Ever since then the APIs accept 'char *' instead, but they
kept the old alias just for API stability. Well, not anymore [2].
1: 9eb9c93275
2: 7a124ca275
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Choose a TPM 2 device for the backend as default for the CRB interface
since TPM 1.2 would not work.
This patch addresses BZ 1781913: https://bugzilla.redhat.com/show_bug.cgi?id=1781913
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The firmware (SLOF) on QEMU for ppc64 does not support TPM 1.2, so
prevent the choice of TPM 1.2 when the SPAPR device model is chosen
and use a default of '2.0' (TPM 2) for the backend.
This patch addresses BZ 1781913: https://bugzilla.redhat.com/show_bug.cgi?id=1781913
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Move setting the TPM default version out of the validation function into
the post parse function.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Functions `qemuDomainObjPrivateXMLParseJob` and
`qemuDomainObjPrivateXMLFormatJob` are moved from
`qemu_domain` to `qemu_domainjob`.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
`qemuDomainObjPrivatePtr` parameter was avoided being passed
as a paramter in functions `qemuDomainObjPrivateXMLParseJob`
and `qemuDomainObjPrivateXMLFormatJob`, as we already pass
`virDomainObjPtr`, which can be used to get `privateData`
pointer.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
During disk hot plugging, qemuDomainAttachDeviceLive() adds the new
disk to the device list of the VM object. However, hot plugging
cdroms and floppies only updates the src variable of the original
disk device, so the newly generated disk object needs to be freed.
Signed-off-by: Jin Yan <jinyan12@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is only used in the ESX driver where, when set to "static", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove both 'error' and 'cleanup' labels.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the unneeded 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the obsolete 'error' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Next patch will use g_autoptr() in a qemuMigrationCookiePtr pointer to
modernize qemuMigrationSrcBeginPhase().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
