Once qemuProcessInit was called, qemuProcessLaunch will launch a new
QEMU process with stopped virtual CPUs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart is going to be split in three parts: qemuProcessInit,
qemuProcessLaunch, and qemuProcessFinish so that migration Prepare phase
can insert additional code in the process. qemuProcessStart will be a
small wrapper for all other callers.
qemuProcessInit prepares the domain up to the point when priv->qemuCaps
is initialized.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
'model' attribute was added to a panic device but only one panic
device is allowed. This patch changes panic device presence
from 'optional' to 'zeroOrMore'.
Panic device type used depends on 'model' attribute.
If no model is specified then device type depends on hypervisor
and guest arch. 'pseries' model is used for pSeries guest and
'isa' model is used in other cases.
XML:
<devices>
<panic model='hyperv'/>
</devices>
QEMU command line:
qemu -cpu <cpu_model>,hv_crash
Libvirt already has two types of panic devices - pvpanic and pSeries firmware.
This patch introduces the 'model' attribute and a new type of panic device.
'isa' model is for ISA pvpanic device.
'pseries' model is a default value for pSeries guests.
'hyperv' model is the new type. It's used for Hyper-V crash.
Schema and docs are updated for the new attribute.
A PCI device may have the capability to setup virtual functions (VFs)
but have them currently all disabled. Prior to this patch, if that was
the case the the node device XML for the device wouldn't report any
virtual_functions capability.
With this patch, if a file called "sriov_totalvfs" is found in the
device's sysfs directory, its contents will be interpreted as a
decimal number, and that value will be reported as "maxCount" in a
capability element of the device's XML, e.g.:
<capability type='virtual_functions' maxCount='7'/>
This will be reported regardless of whether or not any VFs are
currently enabled for the device.
NB: sriov_numvfs (the number of VFs currently active) is also
available in sysfs, but that value is implied by the number of items
in the list that is inside the capability element, so there is no
reason to explicitly provide it as an attribute.
sriov_totalvfs and sriov_numvfs are available in kernels at least as far
back as the 2.6.32 that is in RHEL6.7, but in the case that they
simply aren't there, libvirt will behave as it did prior to this patch
- no maxCount will be displayed, and the virtual_functions capability
will be absent from the device's XML when 0 VFs are enabled.
Report the maximum possible number of VFs for an SRIOV PF, like this:
<capability type='virtual_functions' maxCount='7'>
...
</capability>
I've just discovered that the virtual_functions and physical_functions
capabilities are not supported in the virNodeDeviceParse functions,
only in virNodeDeviceFormat (I suppose because they are only reported,
not set from XML). This should probably be remedied, but is less
immediately useful than the current patch.
The checked predicate is a deduction from the following checks:
1) maximum cpu id is checked for every parsed <vcpusched> element
2) the resulting bitmaps are checked for overlaps
3) there has to be at least one cpu per <vcpusched>
From the above checks we can indeed deduce that if we have one
<vcpusched> element per CPU we will have at most 'maxvcpus' of them.
Drop the explicit check since it's redundant.
Now that new domains are started inside a QEMU_ASYNC_JOB_START job,
we need to pass it down to qemuProcessStartCPUs too.
This removes the warning:
qemuDomainObjEnterMonitorInternal:1750 : This thread seems to be the
async job owner; entering monitor without asking for a nested job is
dangerous
Introduced by commit 04c721f, before that this code path was only
executed with QEMU_ASYNC_JOB_NONE.
(This code is not executed on migration, because qemuMigrationPrepareAny
sets the VIR_QEMU_PROCESS_START_PAUSED flag.)
The domain definition is not needed in any of these functions.
Only pass it to qemuSetupChardevCgroup, which is used as a callback
for virDomainChrDefForeach.
Use the right type for passing virDomainObjPtr instead of
void* where possible.
https://bugzilla.redhat.com/show_bug.cgi?id=1282288
Rather than using just open on the path, allow for the possibility that
the path to be opened resides on an NFS root-squash target and was created
under a different uid/gid.
Without using virFileOpenAs an attempt to get the volume size data may fail
if the current user doesn't have permissions to read the volume, such as
would be the case if mode wasn't supplied in the volume XML and the default
VIR_STORAGE_DEFAULT_VOL_PERM_MODE (e.g. 0600) was used. Under this scenario
the owner/group is not root:root, thus this path run under root would fail
to open/read the volume.
NB: The virFileOpenAs code using OPEN_FORK will only work when the failure
is not EACESS/EPERM and the path resolves to a shared file system.
https://bugzilla.redhat.com/show_bug.cgi?id=1282288
Although commit id '77346f27' resolves part of the problem regarding creating
a qemu-img image in an NFS root-squash environment, it really didn't fix the
entire problem. Unfortunately it only masked the problem. It seems qemu-img
must open/create the image using 0644, which if used by target.perms would
result in the chmod not being called since the mode desired and set match.
Although qemu-img could conceivably ignore the mode when creating, libvirt
has more knowledge of the environment and can make the adjustment to the
mode far more easily by using virFileOpenAs with VIR_FILE_OPEN_FORCE_MODE.
If that's successful, then we know on return the file will have the right
owner and mode, so we can declare success
The amount of memory a ppc64 domain might need to lock is different
than that of a equally-sized x86 domain, so we need to check the
domain's architecture and act accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1273480
The function is used everywhere else to check whether the locked
memory limit should be set / updated, and it should be used here
as well.
Moreover, qemuDomainGetMlockLimitBytes() expects the hostdev to
have already been added to the domain definition, but we only do
that at the end of qemuDomainAttachHostPCIDevice(). Work around
the issue by adding the hostdev before adjusting the locked memory
limit and removing it immediately afterwards.
Commit 6472e54a unlocks the virDomainObj even if libxlDomainObjEndJob
returns false, indicating that its refcnt has dropped to 0.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Commits b6e19cf4 and 6472e54a missed unref'ing the
libxlDriverConfig object. Add missing calls to virObjectUnref.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Remembering to call qemuMonitorSetDomainLog in the right paths before
calling qemuProcessStop is annoying and easy to forget. And I already
forgot to do so in commit v1.2.8-52-g0389060: logfd may be leaked if
QEMU process dies between Prepare and Finish migration phases.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart is so big that any nontrivial code should be moved to
dedicated functions to make the code easier to read and maintain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart is so big that any nontrivial code should be moved to
dedicated functions to make the code easier to read and maintain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart is so big that any nontrivial code should be moved to
dedicated functions to make the code easier to read and maintain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart is so big that any nontrivial code should be moved to
dedicated functions to make the code easier to read and maintain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Traditionally, we pass incoming migration URI on QEMU command line,
which has some drawbacks. Depending on the URI QEMU may initialize its
migration state immediately without giving us a chance to set any
additional migration parameters (this applies mainly for fd: URIs). For
some URIs the monitor may be completely blocked from the beginning until
migration is finished, which means we may be stuck in qmp_capabilities
command without being able to send any QMP commands.
QEMU solved this by introducing "defer" parameter for -incoming command
line option. This will tell QEMU to prepare for an incoming migration
while the actual incoming URI is sent using migrate-incoming QMP
command. Before calling this command we can normally talk to the
monitor and even set any migration parameters which will be honored by
the incoming migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We only started an async job for incoming migration from another host.
When we were starting a domain from scratch or restoring from a saved
state (migration from file) we didn't set any async job. Let's introduce
a new QEMU_ASYNC_JOB_START for these cases.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Incoming migration may require quite a few parameters (URI, fd, path) to
be considered while starting QEMU and we will soon add another one.
Let's group all of them in a single struct.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Make callers of qemuBuildCommandLine responsible for providing the URI
which should be passed as a parameter for -incoming.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Introduce a new helper function "virDiskNameParse" which extends
virDiskNameToIndex but handling both disk index and partition index.
Also rework virDiskNameToIndex to be based on virDiskNameParse.
A test is also added for this function testing both valid and
invalid disk names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for domainMemoryStats API call, which
consequently enables the use of `virsh dommemstat` command to
query for memory statistics of a domain. We support
the following statistics: balloon info, available and currently
in use. swap-in, swap-out, major-faults, minor-faults require
cooperation of the guest and thus currently not supported.
We build on the data returned from libxl_domain_info and deliver
it in the virDomainMemoryStat format.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The LXC driver uses virSetUIDGID() to become UID/GID 0.
It passes an empty groups list to virSetUIDGID()
to get rid of all supplementary groups from the host side.
But virSetUIDGID() calls setgroups() only if the supplied list
is larger than 0.
This leads to a container root with unrelated supplementary groups.
In most cases this issue is unoticed as libvirtd runs as UID/GID 0
without any supplementary groups.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of creating symlinks, bind mount the devices to
/dev/pts/XY.
Using bind mounts it is no longer needed to add pts devices
to files like /etc/securetty.
Signed-off-by: Richard Weinberger <richard@nod.at>
Userspace does not expect that the initial console
is a controlling TTY. systemd can deal with that, others not.
On sysv init distros getty will fail to spawn a controlling on
/dev/console or /dev/tty1. Which will cause to whole container
to reboot upon ctrl-c.
This patch changes the behavior of libvirt to match the kernel
behavior where the initial TTY is also not controlling.
The only user visible change should be that a container with
bash as PID 1 would complain. But this matches exactly the kernel
be behavior with init=/bin/bash.
To get a controlling TTY for bash just run "setsid /bin/bash".
Signed-off-by: Richard Weinberger <richard@nod.at>
https://bugzilla.redhat.com/show_bug.cgi?id=1251190
So, if domain loses access to storage, sanlock tries to kill it
after some timeout. So far, the default is 80 seconds. But for
some scenarios this might not be enough. We should allow users to
adjust the timeout according to their needs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Adjust the config code so that it does not enforce that target memory
node is specified. To avoid breakage, adjust the qemu memory hotplug
config checker to disallow such config for now.
Since we already make sure before that the domain configuration is
valid we may execute it always at the cost of doing 0 iterations of the
for loop.
This patch will simplify later refactor as it will avoid whitespace
changes.
Make the function usable so that -1 can be passed to it as cell ID so
that we can later enable memory hotplug on non-NUMA guests for certain
architectures.
This patch addresses BZ 1244895.
Adapt the sysfs TPM command cancel path for the TPM driver that
does not use a miscdevice anymore since Linux 4.0. Support old
and new paths and check their availability.
Add a mockup for the test cases to avoid the testing for
availability of the cancel path.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Introduce support for domainGetCPUStats API call and consequently
allow us to use `virsh cpu-stats`. The latter returns a more brief
output than the one provided by`virsh vcpuinfo`.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Current monitor code overrides domain object's privateData, e.g.
in virBhyveProcessStart():
vm->privateData = bhyveMonitorOpen(vm, driver);
where bhyveMonitorPtr() returns bhyveMonitorPtr.
This is not right thing to do, so make bhyveMonitorPtr
a part of the bhyveDomainObjPrivate struct and change related code
accordingly.
https://bugzilla.redhat.com/show_bug.cgi?id=1277781
The virStoragePoolFCRefreshThread had passed a pointer to the pool obj
in the virStoragePoolFCRefreshInfoPtr; however, we cannot assume that
the pool exists still since we don't keep the pool lock throughout
the duration of the thread.
Therefore, instead of passing the pool obj pointer, pass the UUID of
the pool and perform a lookup. If found, then we can perform the
refresh using the locked pool obj pointer; otherwise, we just exit
the thread since the pool is now gone.
Logging current async job while in BeginJob is useful, but the async job
we want to start is even more interesting.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Fixes several style issues and removes "DEF" (what is it supposed to
mean anyway?) from debug messages.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
USB controllers can share the same 'index' which indicates, that there
is some sort of master-companion relationship. Reorder the controllers
in XML in to place the master controller before its companions. This is
required by QEMU to not fail with error message:
error: internal error: process exited while connecting to monitor:
2015-10-26T16:25:17.630265Z qemu-system-x86_64:
-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x6:
USB bus 'usb.0' not found
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1166452
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Just straight-forward patch.
Use reference counting for privdom as stats internally could drop domain lock.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The previous commit
commit 4e8993a250
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Nov 9 16:20:08 2015 +0000
qemu: assume various QEMU 0.10 features are always available
Added broken handling of -sdl. Instead of duplicating existing
SDL handling code, just ensure it is invoked in the right
scenarios.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The -sdl and -net ...name=XXX arguments were both introduced
in QEMU 0.10, so the QEMU driver can assume they are always
available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0 the -vga argument was introduced, so the
QEMU driver can assume it is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0 the -drive format= parameter was added,
so the QEMU driver can assume it is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0, the -drive cache option stopped using
the on/off value names, so the QEMU driver can assume
use of the new value names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we require QEMU 0.12.0, we can assume that QEMU supports
all of the fd, tcp, unix and exec migration protocols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We have twice previously attempted to remove Xenner
support
commit de9be0ab4d
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Aug 22 17:29:01 2012 +0100
Remove xenner support
commit 92572c3d71
Author: Ján Tomko <jtomko@redhat.com>
Date: Wed Feb 18 16:33:50 2015 +0100
Remove code handling the QEMU_CAPS_DOMID capability
This change really does remove the last traces of it
in the capabilities handling code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.9.1 the -drive argument can be used to configure
all disks, so the QEMU driver can assume it is always available
and drop support for -hda/-cdrom/etc.
Many of the tests need updating because a great many were
running without CAPS_DRIVE set, so using the -hda legacy
syntax.
Fixing the tests uncovered a bug in the argv -> xml
convertor which failed to handle disk with if=floppy.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QEMU argv -> virDomainDef conversion code was not handling
-drive arguments using the floppy bus. This caused them to be
added as hard disks instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The -no-reboot arg was added in QEMU 0.9.0, so the QEMU driver
can now assume it is always present.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.11.0 the 'info chardev' monitor command can be
used to report on allocated chardev paths, so we can drop
support for parsing QEMU stderr to locate the PTY paths.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.9.0 the -vnc option accepts a ':' to separate port
from listen address, so the QEMU driver can assume that support
for listen addresses is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The kQEMU accelerator was deleted in QEMU 0.12, so we no
longer need to support it in the QEMU driver.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Check the QEMU version and refuse to work with QEMU versions
older than 0.12.0. This is approximately the vintage of QEMU
that is available in RHEL-6 era distros.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If mlock is required either due to use of VFIO hostdevs or due to the
fact that it's enabled it needs to be tweaked prior to adding new memory
or after removing a module. Add a helper to determine when it's
necessary and reuse it both on hotplug and hotunplug.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1273491
Use virNetDevSetupControl instead of open coding using socket(AF_LOCAL...)
and clearing virIfreq.
By using virNetDevSetupControl, the socket is then opened using
AF_PACKET which requires being privileged (effectively root) in
order to complete successfully. Since that's now a requirement,
then the ioctl(SIOCETHTOOL) should not fail with EPERM, thus it
is removed from the filtered listed of failure codes.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since the SIOCETHTOOL ioctl only works for privileged daemons, if called
when not root, then virNetDevGetFeatures will VIR_DEBUG a message and
return 0 as if the functions were not available for the architecture.
This effectively returns an empty bitmap indicating no features available.
Introduced by commit id 'c9027d8f4'
Signed-off-by: John Ferlan <jferlan@redhat.com>
In commit id 'c9027d8f4' when updating the posted patch to generate
a bitmap instead of an array of named feature bits, adjustment of
the args was missed
Recently reverted commit id '6f2a0198' showed a need to add extra
comments when dealing with filtering of potential "non-issues".
Scanning through upstream patch postings indicates early on the
reasons for the filtering of specific ioctl failures were provided;
however, when converted from causing an error to VIR_DEBUG's the
reasons were missing. A future read/change of the code incorrectly
assumed they could or should be removed.
This reverts commit 6f2a0198e9.
This commit removed error reporting from virNetDevSendEthtoolIoctl
pushing responsibility onto the callers. This is wrong, however,
since virNetDevSendEthtoolIoctl calls virNetDevSetupControl
which can still report errors. So as a result virNetDevSendEthtoolIoctl
may or may not report errors depending on which bit of it fails, and as
a result callers now overwrite some errors.
It also introduced a regression causing unprivileged libvirtd to
spew error messages to the console due to inability to query the
NIC features, an error which was previously ignored.
virNetDevSetupControlFull:148 : Cannot open network interface control socket: Operation not permitted
virNetDevFeatureAvailable:3062 : Cannot get device wlp3s0 flags: Operation not permitted
virNetDevSetupControlFull:148 : Cannot open network interface control socket: Operation not permitted
virNetDevFeatureAvailable:3062 : Cannot get device wlp3s0 flags: Operation not permitted
virNetDevSetupControlFull:148 : Cannot open network interface control socket: Operation not permitted
virNetDevFeatureAvailable:3062 : Cannot get device wlp3s0 flags: Operation not permitted
virNetDevSetupControlFull:148 : Cannot open network interface control socket: Operation not permitted
virNetDevFeatureAvailable:3062 : Cannot get device wlp3s0 flags: Operation not permitted
Looking back at the original posting I see no explanation of why
thsi refactoring was needed, so reverting the clearly broken
error reporting logic looks like the best option.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code reported that a migration flag is unsupported but didn't jump
to the error label. Probably an oversight in commit f88af9dc that
introduced the flag checking.
Since the flag was not enabled when 'eating' the migration cookie,
libvirt reported a bogus error when memory hotplug was enabled:
unsupported migration cookie feature memory-hotplug
The error was ignored though due to a bug in the code so it slipped
through testing.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1278404
Commit id '0f7436ca' added virNetDevWaitDadFinish using ATTRIBUTE_NONNULL
for both arguments, although one is a non-null argument. A Coverity build
balks at that.
Rather than "if (virNetDevFeatureAvailable(ifname, &cmd))" change the
success criteria to "if (virNetDevFeatureAvailable(ifname, &cmd) == 1)".
The called helper returns -1 on failure, 0 on not found, and 1 on found.
Thus a failure was setting bits.
Introduced by commit ac3ed20 which changed the helper's return
values without adjusting its callers
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1233003
Commit id 'fdda3760' only managed a symptom where it was possible to
create a file in a pool without libvirt's knowledge, so it was reverted.
The real fix is to have all the createVol API's which actually create
a volume (disk, logical, zfs) and the buildVol API's which handle the
real creation of some volume file (fs, rbd, sheepdog) manage deleting
any volume which they create when there is some sort of error in
processing the volume.
This way the onus isn't left up to the storage_driver to determine whether
the buildVol failure was due to some failure as a result of adjustments
made to the volume after creation such as getting sizes, changing ownership,
changing volume protections, etc. or simple a failure in creation.
Without needing to consider that the volume has to be removed, the
buildVol failure path only needs to remove the volume from the pool.
This way if a creation failed due to duplicate name, libvirt wouldn't
remove a volume that it didn't create in the pool target.
This reverts commit fdda37608a.
This commit only manages a symptom of finding a buildRet failure
where a volume was not listed in the pool, but someone created the
volume outside of libvirt in the pool being managed by libvirt.
After successfully returning from virFileOpenAs, if subsequent calls fail,
then we need to remove the file since our caller expects that failures after
creation will remove the created file.
After a successful qemu-img/qcow-create of the backing file, if we
fail to stat the file, change it owner/group, or mode, then the
cleanup path should remove the file.
Currently the code does not handle the NFS root squash environment
properly since if the file gets created, then the subsequent chmod
will fail in a root squash environment where we're creating a file
in the pool with qemu tools, such as seen via:
$ virsh vol-create-from $pool $file.xml file.img --inputpool $pool
assuming $file.xml is creating a file of "<format type='qcow2'"> from
an existing file.img in the pool of "<format type='raw'>".
This patch will utilize the virCommandSetUmask when creating the file
in the NETFS pool. The virCommandSetUmask API was added in commit id
'0e1a1a8c4', which was after the original code was developed in commit
id 'e1f27784' to attempt to handle the root squash environment.
Also, rather than blindly attempting to chmod, check to see if the
st_mode bits from the stat match what we're trying to set and only
make the chmod if they don't.
Also, a slight adjustment to the fallback algorithm to move the
virCommandSetUID/virCommandSetGID inside the if (!filecreated) since
they're only useful if we need to attempt to create the file again.
VIR_DEBUG and VIR_WARN will automatically add a new line to the message,
having "\n" at the end or at the beginning of the message results in
empty lines.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
nodeset should be freed in both success and failure paths.
While tmppath is freed immediately after it's consumed, moving it from
error to cleanup label is a bit more consistent and robust.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Generally, we use "ret" variable for storing the value we are going to
return at the and of a function, but this is not the case in
qemuProcessStart. Let's rename "ret" as "rv".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart was passing char * migrateFrom as the third argument to
qemuPrepareNVRAM. We should explicitly convert the pointer to bool which
is what the function expects.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This was originally set to 5 seconds, but times of 5.5 to 7 seconds
were experienced. Since it's an arbitrary number intended to prevent
an infinite hang, having it a bit too high won't hurt anything, and 20
seconds looks to be adequate (i.e. I think/hope we don't need to make
it tunable in libvirtd.conf)
If DAD not finished in 5 seconds, user will get an
unknown error like this:
# virsh net-start ipv6
error: Failed to start network ipv6
error: An error occurred, but the cause is unknown
Call virReportError to set an error.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Build on non-Linux fails because the virNetDevWaitDadFinish() stub
has unused parameters. Fix by adding appropriate ATTRIBUTE_UNUSED
for these parameters.
Pushing under build-breaker rule.
commit db488c79 assumed that dnsmasq would complete IPv6 DAD before
daemonizing, but in reality it doesn't wait, which creates problems
when libvirt's bridge driver sets the matching "dummy tap device" to
IFF_DOWN prior to DAD completing.
This patch waits for DAD completion by periodically polling the kernel
using netlink to check whether there are any IPv6 addresses assigned
to bridge which have a 'tentative' state (if there are any in this
state, then DAD hasn't yet finished). After DAD is finished, execution
continues. To avoid an endless hang in case something was wrong with
the kernel's DAD, we wait a maximum of 5 seconds.
https://bugzilla.redhat.com/show_bug.cgi?id=1270715
Commit id '9deb96f' removed the code to fetch the nodeset from the
CpusetMems cgroup for a running vm in favor of using the return from
virDomainNumatuneFormatNodeset introduced by commit id '43b67f2e7'.
However, that API will return the value of the passed 'auto_nodeset'
when placement is VIR_DOMAIN_NUMATUNE_PLACEMENT_AUTO, which happens
to be NULL.
Since commit id 'c74d58ad' started using priv->autoNodeset in order
to manage the auto placement value during qemuProcessStart, it should
be passed along in order to return the correct value if the domain
requests the auto placement.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
When a RBD volume has snapshots it can not be removed.
This patch introduces a new flag to force volume removal,
VIR_STORAGE_VOL_DELETE_WITH_SNAPSHOTS.
With this flag any existing snapshots will be removed prior to
removing the volume.
No existing mechanism in libvirt allowed us to pass such information,
so that's why a new flag was introduced.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
After commit a26669d7, we only jump to error when
virDomainMigrateUnmanagedParams return a value less than -1.
this will make the migrate result always be success even we
meet some problem.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
In commit f41be296, we moved vm->persistent check into
qemuDomainRemoveInactive, but we didn't change the vm->persistent
before call qemuDomainRemoveInactive in some place before and just
call it to remove the inactive vm.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Lets use wrapper functions virLockDaemonLock and
virLockDaemonUnlock instead of virMutexLock and virMutexUnlock.
This has no functional impact, but it's easier to read (at least
for me).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This calls the PCI-, USB- and SCSI-specific functions just
like qemuHostdev{Prepare,ReAttach}DomainDevices() already do,
and was the missing piece for the qemuHostdev API to nicely
mirror the virHostdev API.
Update qemuProcessReconnect() to use the new function.
Adopt the same names used for virHostdevUpdateActive*Devices() for
consistency's sake and to make it easier to jump between the two.
No functional changes.
Adopt the same names used for virHostdevReAttach*Devices() for
consistency's sake and to make it easier to jump between the two.
No functional changes.
Fix a cut-n-paste error from commit id '35eecdde' where the previous
check for max_sectors seems to have been copied, but the error message
parameter not updated to be ioeventfd
Commit id '1c24cfe9' added error messages for virNumaSetPagePoolSize;
however, virNumaGetHugePageInfo also uses virNumaGetHugePageInfoPath
in order to build the path, but it never checked upon return if
the built path exists which could lead to an error message as follows:
$ virsh freepages 0 1
error: Failed to open file
'/sys/devices/system/node/node0/hugepages/hugepages-1kB/free_hugepages':
No such file or directory
Rather than add the same message for the other two callers, adjust
the virNumaGetHugePageInfoPath in order not only build the path, but
also check if the built path exists. If the path does not exist,
then generate the error message and return failure.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Commit id '1c24cfe9' added new checks and error messaes for failure
scenarios. Let's adjust those error messages to after the call to
virNumaGetHugePageInfoPath in order to provide a more specific error
message depending on node and page_size
After this patch:
# virsh allocpages --pagesize 2047 --pagecount 1 --cellno 0
error: operation failed: page size 2047 is not available on node 0
# virsh allocpages --pagesize 2047 --pagecount 1
error: operation failed: page size 2047 is not available
Signed-off-by: Luyao Huang <lhuang@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1265114
Refactor helper virNumaGetHugePageInfoPath to handle returning a directory
path when passed a page_size of 0 and suffix == NULL into a new helper
virNumaGetHugePageInfoDir which will only be called when a directory
path is expected to be returned. This solves the issue where the helper
was called with page_size == 0 expecting a file path in return, but
instead got a directory path and failed in virFileReadAll with:
error : virFileReadAll:1358 : Failed to read file
'/sys/devices/system/node/node0/hugepages/': Is a directory
Since virNumaGetPages API expects to return a directory by passing
page_size == 0 and suffix == NULL, it will now call the new helper.
Callers to virNumaGetHugePageInfoPath expect to return a file path
which could then be used in the call to virFileReadAll.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
We have macros for both positive and negative string matching.
Therefore there is no need to use !STREQ or !STRNEQ. At the same
time as we are dropping this, new syntax-check rule is
introduced to make sure we won't introduce it again.
Signed-off-by: Ishmanpreet Kaur Khera <khera.ishman@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The following functions are implemented:
vzDomainIsUpdated, vzDomainGetVcpusFlags and vzDomainGetMaxVcpus.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
The following functions were implemented:
vzNodeGetCPUStats, vzNodeGetMemoryStats,
vzNodeGetCellsFreeMemory and vzNodeGetFreeMemory.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Because we have no limitation for maximal number of vcpus in containers
we report as maximum 1028 just for the sake of common sence.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Even though the APIs are not implemented yet, they create a
skeleton that can be filled in later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function should really be called only when we want to change
ownership of a file (or disk source). Lets switch to calling a
wrapper function which will eventually record the current owner
of the file and call virSecurityDACSetOwnershipInternal
subsequently.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is pure code adjustment. The structure is going to be needed
later as it will hold a reference that will be used to talk to
virtlockd. However, so far this is no functional change just code
preparation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is pure code adjustment. The structure is going to be needed
later as it will hold a reference that will be used to talk to
virtlockd. However, so far this is no functional change just code
preparation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It's better if we stat() file that we are about to chown() at
first and check if there's something we need to change. Not that
it would make much difference, but for the upcoming patches we
need to be doing stat() anyway. Moreover, if we do things this
way, we can drop @chown_errno variable which will become
redundant.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Correctly mark the places where we need to remember and recall
file ownership. We don't want to mislead any potential developer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So we have this mechanism that on SIGUSR1 the virtlockd dumps its
internal state into a JSON file, reexec itself and the reloads
the internal state back. However, there's a bug in our
implementation:
(gdb) signal SIGUSR1
Continuing with signal SIGUSR1.
[Thread 0x7fd094f7b700 (LWP 10602) exited]
process 10600 is executing new program: /home/zippy/work/libvirt/libvirt.git/src/virtlockd
warning: Could not load shared library symbols for linux-vdso.so.1.
Do you need "set solib-search-path" or "set sysroot"?
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
[New Thread 0x7fb28bc3c700 (LWP 14501)]
Program received signal SIGSEGV, Segmentation fault.
0x00007fb29133d530 in virExpandN (ptrptr=0x70, size=8, countptr=0x68, add=1, report=true, domcode=7, filename=0x7fb29138aeab "rpc/virnetserver.c", funcname=0x7fb29138b680 <__FUNCTION__.15821> "virNetServerAddProgram", linenr=661) at util/viralloc.c:288
288 if (*countptr + add < *countptr) {
(gdb) bt
#0 0x00007fb29133d530 in virExpandN (ptrptr=0x70, size=8, countptr=0x68, add=1, report=true, domcode=7, filename=0x7fb29138aeab "rpc/virnetserver.c", funcname=0x7fb29138b680 <__FUNCTION__.15821> "virNetServerAddProgram", linenr=661) at util/viralloc.c:288
#1 0x00007fb29132a267 in virNetServerAddProgram (srv=0x0, prog=0x7fb2915d08b0) at rpc/virnetserver.c:661
#2 0x00007fb29131f27f in main (argc=1, argv=0x7fff8f771298) at locking/lock_daemon.c:1445
Notice the NULL @srv passed to frame 2? Usually, the @srv
variable is initialized on fresh start. However, in case of
daemon reload, the code path that is responsible for initializing
the value was not triggered and therefore we crashed immediately.
Fix this by always setting the variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tunnelled migration can hang if the destination qemu exits despite all the
ABI checks. This happens whenever the destination qemu exits before the
complete transfer is noticed by source qemu. The savevm state checks at
runtime can fail at destination and cause qemu to error out.
The source qemu cant notice it as the EPIPE is not propogated to it.
The qemuMigrationIOFunc() notices the stream being broken from virStreamSend()
and it cleans up the stream alone. The qemuMigrationWaitForCompletion() would
never get to 100% transfer completion.
The qemuMigrationWaitForCompletion() never breaks out as well since
the ssh connection to destination is healthy, and the source qemu also thinks
the migration is ongoing as the Fd to which it transfers, is never
closed or broken. So, the migration will hang forever. Even Ctrl-C on the
virsh migrate wouldn't be honoured. Close the source side FD when there is
an error in the stream. That way, the source qemu updates itself and
qemuMigrationWaitForCompletion() notices the failure.
Close the FD for all kinds of errors to be sure. The error message is not
copied for EPIPE so that the destination error is copied instead later.
Note:
Reproducible with repeated migrations between Power hosts running in different
subcores-per-core modes.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1264008
The existing algorithm assumed that someone was making small, incremental
changes; however, it is possible to change iothreads from 0 (or relatively
small number) to some really large number and the algorithm would possibly
spin its wheels doing unnecessary searches.
So, optimize the algorithm using a bitmap to find available iothread_id's
starting at 1 that aren't already defined by a "<thread id='#'>" and
filling in the iothreadids array with those iothread_id values.
https://bugzilla.redhat.com/show_bug.cgi?id=1249981
When qemuDomainPinIOThread was added in commit id 'fb562614', a check
for the IOThread capability was not needed since a check for iothreadpids
covered the condition where the support for IOThreads was not present.
The iothreadpids array was only created if qemuProcessDetectIOThreadPIDs
was able to query the monitor for IOThreads. It would only do that if
the QEMU_CAPS_OBJECT_IOTHREAD capability was set.
However, when iothreadids were added in commit id '8d4614a5' and the
check for iothreadpids was replaced by a search through the iothreadids[]
array for the matching iothread_id that left open the possibility that
an iothreadids[] array was defined, but the entries essentially pointed
to elements with only the 'iothread_id' defined leaving the 'thread_id'
value of 0 and eventually the cpumap entry of NULL.
This was because, the original IOThreads commit id '72edaae7' only
checked if IOThreads were defined and if the emulator had the IOThreads
capability, then IOThread objects were added at startup. The "capability
failure" check was only done when a disk was assigned to an IOThread in
qemuCheckIOThreads. This was because the initial implementation had no way
to dynamically add IOThreads, but it was possible to dynamically add a
disk to the domain. So the decision was if the domain supported it, then
add the IOThread objects. Then if a disk with an IOThread defined was
added, it could check the capability and fail to add if not there. This
just meant the 'iothreads' value was essentially ignored.
Eventually commit id 'a27ed6e7' allowed for the dynamic addition and
deletion of IOThread objects. So it was no longer necessary to generate
IOThread objects to dynamically attach a disk to. However, the startup
and disk check code was not modified to reflect this.
This patch will move the capability failure check to when IOThread
objects are being added to the command line. Thus a domain that has
IOThreads defined will not be started if the emulator doesn't support
the capability. This means when qemuCheckIOThreads is called to add
a disk, it's no longer necessary to check the capability. Instead the
code can use the IOThreadFind call to indicate that the IOThread
doesn't exist.
Finally because it could be possible to have a domain running with the
iothreadids[] defined prior to this change if libvirtd is restarted each
having mostly empty elements, qemuProcessDetectIOThreadPIDs will check
if there are niothreadids when the QEMU_CAPS_OBJECT_IOTHREAD capability
check fails and remove the elements and array if it exists.
With these changes in place, it turns out the cputune-numatune test
was failing because the right bit wasn't set in the test. So used the
opportunity to fix that and create a test that would expect to fail
with some sort of iothreads defined and used, but not having the
correct capability.
Although theoretically both should be the same value, the niothreadids
should be used in favor of iothreads when performing comparisons. This
leaves the iothreads as a purely numeric value to be saved in the config
file. The one exception to the rule is virDomainIOThreadIDDefArrayInit
where the iothreadids are being generated from the iothreads count since
iothreadids were added after initial iothreads support.
Event implementations need to be registered before a connection to the
Hypervisor is opened, otherwise event handling can be impaired (e.g.
delayed messages). This fact is referenced in an e-mail [1], but should
also be noted in the documentation of the registration functions.
[1] https://www.redhat.com/archives/libvirt-users/2014-April/msg00011.html
Create a separate local API that will fill in the iothreadid array
entries that were not defined by <iothread id='#'> entries in the XML.
Signed-off-by: John Ferlan <jferlan@redhat.com>
After a successful creation of a directory, if some other call results
in returning a failure, let's remove the directory we created to
prevent another round trip or confusion in the caller. In particular, this
function can be called during a storage backend buildVol, so in order
to ensure that caller doesn't need to distinguish between failed create
or some other failure after create, just remove the directory we created.
Signed-off-by: John Ferlan <jferlan@redhat.com>
After a successful creation of a file, if some other call results
in returning a failure, let's unlink the file we created to prevent
another round trip or confusion in the caller. In particular, this
function can be called during a storage backend buildVol, so in order
to ensure that caller doesn't need to distinguish between failed create
or some other failure after create, just remove the volume we created.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1233003
Track when the logical volume was successfully created in order to
properly handle the call to virStorageBackendLogicalDeleteVol. It's
possible that the failure to create was because someone created an
LV in the pool outside of libvirt's knowledge. In this case, we don't
want to delete that LV. A subsequent or future refresh of the pool
will find the volume and cause an earlier failure
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id '1b5685da' refactored the code to move buildvoldef inside
the buildVol conditional; however, the VIR_FREE of the memory was
left only when 'buildret' failed, thus we're leaking memory.
Signed-off-by: John Ferlan <jferlan@redhat.com>
As of commit id '155ca616' a 'refreshVol' is called after a buildVol
succeeds in storageVolCreateXML, thus a volStorageBackendSheepdogRefreshVolInfo
call in virStorageBackendSheepdogBuildVol is no longer necessary.
Additionally, the 'conn' parameter becomes unused.
Signed-off-by: John Ferlan <jferlan@redhat.com>
As of commit id '155ca616' a 'refreshVol' is called after the buildVol
succeeds in storageVolCreateXML, thus the volStorageBackendRBDRefreshVolInfo
call in virStorageBackendRBDBuildVol is no longer necessary.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Without this, building on cygwin fails with:
CC libvirt_admin_la-libvirt-admin.lo
libvirt-admin.c:25:21: fatal error: rpc/rpc.h: No such file or directory
#include <rpc/rpc.h>
^
Reported-by: Yaakov Selkowitz <yselkowi@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Our apibuild.py script does not cope with ATTRIBUTE_NONNULL:
Parse Error: parsing function type, ')' expected
Got token ('name', 'char')
Last token: ('name', 'char')
Token queue: [('op', '*'), ('name', 'dconnuri'), ('sep', ')')]
Line 3297 end:
Makefile:2441: recipe for target '../../docs/apibuild.py.stamp' failed
Let's drop it. Moreover, up until e17ae3ccc2 where it was
introduced we did not really care about NULL-ity of dconnuri. And
moreover the ATTRIBUTE_NONNULL merely checks for static calls
over NULL, it won't catch the dynamic ones, where a NULL is
passed by a variable at runtime.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1256999
After creating a copy of the 'authdef' in a pool -> disk translation,
unconditionally clear the 'authType' in the resulting disk auth def
structure since that's used for a storage pool and not a disk. This
ensures virStorageAuthDefFormat will properly format the <auth> XML
for a <disk> (e.g. it won't have a <auth type='%s'.../>).
Check dconnuri is not null or we will catch nullpointer later.
I hope this makes Coverity happy.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
virDomainMigrateUnmanagedParams is not a good candidate for this functionality
as it is used by migrate family functions too and its have its own checks that
are superset of extracted and we don't need to check twice.
Actually name of the function is slightly misleading as there is also a check
for consistensy of flags parameter alone. So it could be refactored further and
reused by all migrate functions but for now let it be a matter of a different
patchset.
It is *not* a pure refactoring patch as it introduces offline check for older
versions. Looks like it must be done that way and no one will be broken too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Finally on this step we get what we were aimed for - toURI{1, 2} (and
migration{*} APIs too) now can work thru V3_PARAMS protocol. Execution path
goes thru unchanged virDomainMigrateUnmanaged adapter function which is called
by all target places.
Note that we keep the fact that direct migration never works
thru V3_PARAMS proto. We can't change this aspect without
further investigation.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Move virDomainMigrateUnmanagedProto* expected params list check into
function itself and use common virTypedParamsCheck for this purpose.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Extract parameter adaptation and checking which is protocol dependent into
designated functions. Leave only branching and common checks in
virDomainMigrateUnmanagedParams.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Let's put main functionality into params version of virDomainMigrateUnmanaged
as a preparation step for merging it with virDomainMigratePeer2PeerParams.
virDomainMigrateUnmanaged then does nothing more then just adapting arguments.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
p2p plain and direct function are good candidates for code reuse. Their main
function is same - to branch among different versions of migration protocol and
implementation of this function is also same. Also they have other common
functionality in lesser aspects. So let's merge them.
But as they have different signatures we have to get to convention on how to
pass direct migration 'uri' in 'dconnuri' and 'miguri'. Fortunately we alreay
have such convention in parameters passed to toURI2 function, just let's follow
it. 'uri' is passed in miguri and dconnuri is ignored.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
We use miguri name for this parameter in other places. So
make naming more consitent.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Direct migration should work if *perform3 is present but *perform
is not. This is situation when driver migration is implemented
after new version of driver function is introduced. We should not
be forced to support old version too as its parameter space is
subspace of newer one.
This is more structured code so it will be easier to add branch for _PARAMS
protocol here. It is not a pure refactoring strictly speaking as we remove
scenarios for broken cases when driver defines V3 feature and implements
perform function. So it is additionally a more solid code.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
'useParams' parameter usage is an example of control coupling. Most of the work
inside the function is done differently except for the uri check. Lets split
this function into two, one with extensible parameters set and one with hardcoded
parameter set.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The internal representation of a JSON array counts the items in
size_t. However, for some reason, when asking for the count it's
reported as int. Firstly, we need the function to return a signed
type as it's returning -1 on an error. But, not every system has
integer the same size as size_t. Therefore, lets return ssize_t.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 4e8032272f used $(builddir) in the header search
path to fix a build issue; however, $(builddir) is not defined
by old autoconf versions such as the one available in CentOS 5,
resulting in the following error:
cc1: error: /util: No such file or directory
make[3]: *** [libvirt_driver_la-fdstream.lo] Error 1
Since $(builddir) is defined to always be '.', just use that
value directly instead.
Since a9fe620372, we are generating virkeymaps.h at build
time; however, we are not including $(builddir)/util in the
header search path, so when doing a VPATH build the compiler
is unable to locate the file.
make[2]: Entering directory
`/home/jenkins/libvirt/systems/libvirt-fedora-20/build/src'
GEN util/virkeymaps.h
...
CC util/libvirt_util_la-virkeycode.lo
CC util/libvirt_util_la-virkeyfile.lo
CC util/libvirt_util_la-virlockspace.lo
CC util/libvirt_util_la-virlog.lo
../../src/util/virkeycode.c:27:24: fatal error: virkeymaps.h: No such file or directory
#include "virkeymaps.h"
^
compilation terminated.
Coverity notices that net->ifname is potentially referenced after a
VIR_FREE(). Since the net->ifname will eventually be free'd during
virDomainDefFree when calling virDomainNetDefFree, let's just that
processing take care the free.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since the strtok_r call in libxlCapsInitGuests expects a non NULL first
parameter when the third parameter is NULL, we need to check that
the returned 'capabilities' from a libxl_get_version_info call is
not NULL and error out if so since the code expects it.
Signed-off-by: John Ferlan <jferlan@redhat.com>
So imagine you want to crate new security manager:
if (!(mgr = virSecurityManagerNew("selinux", "QEMU", false, true, false, true)));
Hard to parse, right? What about this:
if (!(mgr = virSecurityManagerNew("selinux", "QEMU",
VIR_SECURITY_MANAGER_DEFAULT_CONFINED |
VIR_SECURITY_MANAGER_PRIVILEGED)));
Now that's better! This is what the commit does.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This gets rid of the partially enforced alignment and makes it less
likely for a bogus value to be introduced in the enumeration.
Capabilities are divided in five-element groups for better readability.
Use #define for QEMU_CAPS_NET_NAME and QEMU_CAPS_HOST_NET_ADD, both
of which are aliases for QEMU_CAPS_0_10.
qemuMigrationIsAllowed would disallow offline migration if the VM
contained host devices or memory modules. Since during offline migration
we don't transfer any state we can safely migrate VMs with such
configuration.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1265049
Use the migration @flags for checking various migration aspects rather
than picking them out as booleans. Document the new semantics in the
function header.
Now that qemuMigrationIsAllowed is always called with @vm, we can drop
the @def argument and simplify the control flow.
Additionally the comment is invalid so drop it.
Extract the hostdev check from qemuMigrationIsAllowed into a separate
function since that is the only part that needs to be done in the v2
migration protocol prepare phase on the destination. All other checks
were added when the v3 protocol existed so they don't need to be
extracted.
This change will allow to drop the @def argument for
qemuMigrationIsAllowed and further simplify the function.
In fact, it was never used as far as vz has no features supporting it.
That is why there will be no harm to anyone if we just remove this code to
prevent further misunderstanding and efforts to support dead code.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
At the time this code was added we had intentions to support libvirt interface
to manage vz networks. In fact, it was never implemented completely to work
correctly that makes me think that there will be no harm to anyone if we just
rip it off. Moreover, in vz7 we started to use libvirt bridge network driver to
manage networks.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Even though QEMU on the source host reports completed migration and thus
we move to the Finish phase, QEMU on the destination host may still be
processing migration data. Thus before we can start guest CPUs on the
destination, we have to wait for a completed migration event.
https://bugzilla.redhat.com/show_bug.cgi?id=1265902
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
With new QEMU which supports migration events,
qemuMigrationCheckJobStatus needs to explicitly query QEMU for migration
statistics once migration is completed to make sure the caller sees
up-to-date statistics with both old and new QEMU. However, some callers
are not interested in the statistics at all and once we start waiting
for a completed migration on the destination host too, checking the
statistics would even fail. Let's push the decision whether to update
the statistics or not to the caller.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function already has two bool parameters and we will need to add a
new one. Let's switch to flags to make the callers readable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The destination host gets detailed statistics about the current
migration form the source host via migration cookie and copies them to
the domain object so that they can be queried using
virDomainGetJobStats. However, we should only copy statistics to the
domain object when migration finished successfully.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Even if we are migrating a domain with VIR_MIGRATE_PAUSED flag set, we
should still update the total time of the migration. Updating downtime
doesn't hurt either, even though we don't actually start guest CPUs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We are distributing virkeymaps.h and all the tools needed to rebuild
that file. On top of that, we are generating that file into the
$(srcdir) and that sometimes fails when trying to do make dist in VPATH
on rawhide fedora. And we don't clean the file when maintainer-clean
make target is requested. So let's not distribute the file and rather
let everyone rebuild it when needed and clean it when appropriate.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
profile_status function was not making any difference between error
cases and unconfined profiles. The problem with this approach is that
dominfo was throwing an error on unconfined domains.
Our docs state that subelements of <metadata> shall have a namespace
and the medatata APIs expect that too. To avoid inaccessible
<metadata> sub-elements, just remove those that don't conform to the
documentation.
Apart from adding the new condition this patch renames the function and
refactors the code flow to allow the changes.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1245525
https://bugzilla.redhat.com/show_bug.cgi?id=1247987
Calculation of the extended and logical partition values for the disk
pool is complex. As the bz points out an extended partition should have
it's allocation initialized to 0 (zero) and keep the capacity as the size
dictated by the extents read. Then for each logical partition found,
adjust the allocation of the extended partition.
Finally, previous logic tried to avoid recalculating things if a logical
partition was deleted; however, since we now have special logic to handle
the allocation of the extended partition, just make life easier by reading
the partition table again - rather than doing the reverse adjustment.
https://bugzilla.redhat.com/show_bug.cgi?id=1251461
When 'starting' up a disk pool, we need to make sure the label on the
device is valid; otherwise, the followup refreshPool will assume the
disk has been properly formatted for use. If we don't find the valid
label, then refuse the start and give a proper reason.
Let's check to ensure we can find the Partition Table in the label
and that libvirt actually recognizes that type; otherwise, when we
go to read the partitions during a refresh operation we may not be
reading what we expect.
This will expand upon the types of errors or reason that a build
would fail, so we can create more direct error messages.
Modify virStorageBackendDiskValidLabel to add a 'writelabel' parameter.
While initially for the purpose of determining whether the label should
be written during DiskBuild, a future use during DiskStart could determine
whether the pool should be started using the label found. Augment the
error messages also to give a hint as to what someone may need to do
or why the command failed.
Create a new function virStorageBackendDiskValidLabel to handle checking
whether there is a label on the device and whether it's valid or not.
While initially for the purpose of determining whether the label can be
overwritten during DiskBuild, a future use during DiskStart could determine
whether the pool should be started using the label found.
https://bugzilla.redhat.com/show_bug.cgi?id=1233003
Although perhaps bordering on a don't do that type scenario, if
someone creates a volume in a pool outside of libvirt, then uses that
same name to create a volume in the pool via libvirt, then the creation
will fail and in some cases cause the same name volume to be deleted.
This patch will refresh the pool just prior to checking whether the
named volume exists prior to creating the volume in the pool. While
it's still possible to have a timing window to create a file after the
check - at least we tried. At that point, someone is being malicious.
As it turns out the caller in this case expects a return < 0 for failure
and to get/use "errno" rather than using the negative of returned status.
Again different than the create path.
If someone "deleted" a file from the pool without using virsh vol-delete,
then the unlink/rmdir would return an error (-1) and set errno to ENOENT.
The caller checks errno for ENOENT when determining whether to throw an
error message indicating the failure. Without the change, the error
message is:
error: Failed to delete vol $vol
error: cannot unlink file '/$pathto/$vol': Success
This patch thus allows the fork path to follow the non-fork path
where unlink/rmdir return -1 and errno.
Unlike create options, if the file to be removed is already in the
pool, then the uid/gid will come from the pool. If it's the same as the
currently running process, then just do the unlink/rmdir directly
rather than going through the fork processing unnecessarily
qemu-kvm can be used to run ppc64 guests on ppc64le hosts and vice
versa, since the hardware is actually the same and the endianness
is chosen by the guest kernel.
Up until now, however, libvirt didn't allow the use of qemu-kvm
to run guests if their endianness didn't match the host's.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1267882
Commit 792f81a40e caused a regression in the libssh2 host key
verification code by changing the variable type of 'i' to unsigned.
Since one of the loops used -1 as a special value if the asking
callback was found the conversion made a subsequent test always fail.
The bug was stealth enough to pass review, compilers and coverity.
Refactor the condition to avoid problems.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1047861
Since we'd disallow migration of a guest that would have possibly
invalid config but still be able to work, relax the WWN check to be
performed only on new starts of the VM.
If a system has a large number of active or active interfaces, it can
be a big waste of time to retrieve and qualify all interfaces if the
caller only wanted one subset. Since netcf has a simple flag for this,
translate the libvirt flag into a netcf flag and let netcf pre-filter.
Getting the MAC address of an interface is actually fairly expensive,
and we've already gotten it and stored it into def, so just keep def
around a bit longer and retrieve it from there.
This reduces the time for "virsh iface-list --all" from 28 to 23
seconds when there are 400 interfaces.
The spec for virConnectListAllInterfaces says that if the pointer that
is supposed to hold the list of interfaces is NULL, the function
should just return the count of interfaces that matched the filter,
but the code never increments the count if the list pointer is NULL.
We are using memory-backing-file even when it's not needed, for example
if user requests hugepages for memory backing, but does not specify any
pagesize or memory node pinning. This causes migrations to fail when
migrating from older libvirt that did not do this. So similarly to
commit 7832fac847 which does it for
memory-backend-ram, this commit makes is more generic and
backend-agnostic, so the backend is not used if there is no specific
pagesize of hugepages requested, no nodeset the memory node should be
bound to, no memory access change required, and so on.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1266856
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
So since the introduction of the memory-backend-file object until now we
only added '-mem-path' for non-NUMA guests and we used the parameters of
the memory-backend-file object to specify the path to the hugetlbfs
mount. But hugepages can be also used without memory-backend-file
object, as it used to be before its introduction. Let's just get this
part of the code back and properly append the '-mem-path' for NUMA
guests as well, but only when the memory backend is not needed.
This parameter is already being applied when no numa is requested and
because we still use memory-object-file unconditionally for
hugepage-backed NUMA guests, this should not fire until later.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That function is called qemuBuildMemPathStr() and will be used in
other places in the future. The change in the test suite is proper due
to the fact that -mem-prealloc makes only sense with -mem-path (from
qemu documentation -- html/qemu-doc.html).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Support for GICv3 has been recently introduced in qemu using gic-version
option for the 'virt' machine. The option can actually take values of
'2', '3' and 'host', however, since in libvirt this is a numeric
parameter, we limit it only to 2 and 3. Value of 2 is not added to the
command line in order to keep backward compatibility with older qemu
versions.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Unfortunately qemu currently doesn't offer introspection for machine types,
so we have to rely on version number, similar to QEMU_CAPS_MACHINE_USB_OPT.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Commit 307fb904 (Sep 10) added a 'privileged' variable when creating
the DAC driver:
@@ -153,6 +157,7 @@ virSecurityManagerNewDAC(const char *virtDriver,
bool defaultConfined,
bool requireConfined,
bool dynamicOwnership,
+ bool privileged,
virSecurityManagerDACChownCallback chownCallback)
But argument order is mixed up at the caller, swapping dynamicOwnership
and privileged values. This corrects the argument order
https://bugzilla.redhat.com/show_bug.cgi?id=1266628
Since commit e0139e3, we update the pool allocation with
the user-provided allocation values.
For qcow2, the allocation is ignored for volume building,
but we still subtracted it from pool's allocation.
This can result in interesting values if the user-provided
allocation is large enough:
Capacity: 104.71 GiB
Allocation: 109.13 GiB
Available: 16.00 EiB
We already do a VolRefresh on volume creation. Also refresh
the volume after creating and use the new value to update the pool.
https://bugzilla.redhat.com/show_bug.cgi?id=1163091
Commit id '7383b8cc' changed virDomainDef 'virtType' to an enum, that
caused a build failure on some archs due to comparing an unsigned value
to < 0. Adjust the fetch of 'type' to be into temporary 'int virtType'
and then assign that virtType to the def->virtType
Introduce VIR_DOMAIN_VIRT_NONE to give domaintype the default value of zero.
This is specially helpful in constructing better error messages
when we don't want to look up the default emulator by virtType.
The test data in vircapstest.c is also modified to reflect this change.
As of commit 6992994, we set graphics/@listen attribute according to the
first listen child element even if that element is of type='network'.
This was done for backward compatibility with applications which only
support the original listen attribute. However, by doing so we broke
migration to older libvirt which tried to check that the listen
attribute matches one of the listen child elements but which did not
take type='network' elements into account.
We are not concerned about compatibility with old applications when
formatting domain XML for migration for two reasons. The XML is consumed
only by libvirtd and the IP address associated with type='network'
listen address on the source host is just useless on the destination
host. Thus, we can safely avoid propagating the type='network' IP
address to graphics/@listen attribute when creating migratable XML.
https://bugzilla.redhat.com/show_bug.cgi?id=1265111
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This seemed to be more of a false positive as for some reason Coverity
was missing the "ret < 0" goto error condition and somehow believing that
event could be overwritten. At first I thought it was just the ret != 0
condition difference, but it wasn't.
In any case, make use of the recent change to qemuDomainEventQueue to
check event == NULL and just pass it as a parameter directly in the
error path. That avoids the error.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity complains that return from virHookCall is not checked in
one place in qemuProcessStop. Since the comment notes that we cannot
stop the operation even it if fails, just added the ignore_value.
So while working on my previous patches, I've noticed that
virDomainRestore implementation in qemu and test drivers has the
same problem as I am fixing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
