The chain lookup function was inconsistent on whether it left
a message in the log when looking up a name that is not found
on the chain (leaving a message for OOM or if name was
relative but not part of the chain), and could litter the log
even when successful (when name was relative but deep in the
chain, use of virFindBackingFile early in the chain would complain
about a file not found). It's easier to make the function
consistently emit a message exactly once on failure, and to let
all callers rely on the clean semantics.
* src/util/virstoragefile.c (virStorageFileChainLookup): Always
report error on failure. Simplify relative lookups.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Avoid
overwriting error.
Signed-off-by: Eric Blake <eblake@redhat.com>
When checking if two filenames point to the same inode (whether
by hardlink or symlink), sometimes one of the names might be
relative. This convenience function makes it easier to check.
* src/util/virfile.h (virFileRelLinkPointsTo): New prototype.
* src/util/virfile.c (virFileRelLinkPointsTo): New function.
* src/libvirt_private.syms (virfile.h): Export it.
* src/xen/xm_internal.c (xenXMDomainGetAutostart): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Drop another redundant field from virStorageFileMetadata.
* src/util/virstoragefile.h (_virStorageFileMetadata): Drop
field.
* src/util/virstoragefile.c
(virStorageFileGetMetadataFromFDInternal)
(virStorageFileGetMetadataFromFD)
(virStorageFileGetMetadataRecurse): Adjust callers.
* tests/virstoragetest.c (_testFileData, testStorageChain)
(mymain): Simplify test.
Signed-off-by: Eric Blake <eblake@redhat.com>
A couple pieces of virStorageFileMetadata are used only while
collecting information about the chain, and don't need to
live permanently in the struct. This patch refactors external
callers to collect the information separately, so that the
next patch can remove the fields.
* src/util/virstoragefile.h (virStorageFileGetMetadataFromBuf):
Alter signature.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal):
Likewise.
(virStorageFileGetMetadataFromFDInternal): Adjust callers.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Finally starting to prune away some of the old fields that have
been made redundant by the new fields, on my way towards directly
reusing virStorageSource.
* src/util/virstoragefile.h (_virStorageFileMetadata): Drop
field.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal)
(virStorageFileChainLookup): Adjust callers.
* tests/virstoragetest.c (_testFileData, testStorageChain)
(mymain): Simplify test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Deciding if a user string represents a local file instead of a
network path is an operation worth exposing directly, particularly
since the next patch will be removing a redundant variable that
was caching the information.
* src/util/virstoragefile.h (virStorageIsFile): New declaration.
* src/util/virstoragefile.c (virBackingStoreIsFile): Rename...
(virStorageIsFile): ...export, and allow NULL input.
(virStorageFileGetMetadataInternal)
(virStorageFileGetMetadataRecurse, virStorageFileGetMetadata):
Update callers.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Use it.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
* src/libvirt_private.syms (virstoragefile.h): Export function.
Signed-off-by: Eric Blake <eblake@redhat.com>
So far, my work has been merely preserving the status quo of
backing file analysis. But this patch starts to tread in the
territory of making the backing chain code more powerful - we
will eventually support network storage containing non-raw
formats. Here, we expose metadata information about a network
backing store, even if that information is still hardcoded to
a raw format for now.
* src/util/virstoragefile.c (virStorageFileGetMetadataRecurse):
Also populate struct for non-file backing.
(virStorageFileGetMetadata, virStorageFileGetMetadatainternal):
Recognize non-file top image.
(virFindBackingFile): Add comment.
(virStorageFileChainGetBroken): Adjust comment, ensure output
is set.
* tests/virstoragetest.c (mymain): Update test to reflect it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of the APIs in CPU driver do not expect to get NULL for input
parameters. Let's mark them with ATTRIBUTE_NONNULL and also check for
some members of virCPUDef when the APIs expect them have some specific
values.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The iterator is checked for being less than or equal to need_cpus.
The 'n' variable is incremented need_cpus + 1 times.
Simplify the computation of need_cpus and make its value one larger,
to let it be used instead of 'n' and compared without the equal sign
in loop conditions.
Just index the sum_cpu_time array instead of using a helper variable.
Start the loop at start_cpu instead of continuing for all lower values.
total_cpus is the total number of CPUs on the host
need_cpus is the number of CPUs we need to look at
(need_cpus can be larger than ncpus, because we need to look
at CPUs before the startcpu too, even if we aren't reporting
their stats)
Currently, virCgroupGetPercpuStats is only used by the LXC driver,
filling out the CPUTIME stats. qemuDomainGetPercpuStats does this
and also filles out VCPUTIME stats.
Extend virCgroupGetPercpuStats to also report VCPUTIME stats if
nvcpupids is non-zero. In the LXC driver, we don't have cpupids.
In the QEMU driver, there is at least one cpupid for a running domain,
so the behavior shouldn't change for QEMU either.
Also rename getSumVcpuPercpuStats to virCgroupGetPercpuVcpuSum.
The current use of virStorageFileMetadata is awkward; to learn
some of the information about a child node, you have to read
fields in the parent node. This does not lend itself well to
modifying backing chains (whether inserting a new node in the
chain, or consolidating existing nodes); better would be to
learn about a child node directly in that node. This patch
sets up some new fields which contain redundant information,
although not necessarily in the final desired state for the
new fields (see the next patch for actual tests of what is there
now). Then later patches will do any refactoring necessary to
get the fields to their desired states, and update clients to
get the information from the new fields, so we can finally
delete the fields that are tracking information about the wrong
node.
More concretely, compare these three example backing chains:
good <- one
missing <- two
gluster://server/vol/img <- three
Pre-patch, querying the chains gives:
{ .backingStore = "/path/to/good",
.backingStoreRaw = "good",
.backingStoreIsFile = true,
.backingStoreFormat = VIR_STORAGE_FILE_RAW,
.backingMeta = {
.backingStore = NULL,
.backingStoreRaw = NULL,
.backingStoreIsFile = false,
.backingMeta = NULL,
}
}
{ .backingStore = NULL,
.backingStoreRaw = "missing",
.backingStoreIsFile = false,
.backingStoreFormat = VIR_STORAGE_FILE_NONE,
.backingMeta = NULL,
}
{ .backingStore = "gluster://server/vol/img",
.backingStoreRaw = NULL,
.backingStoreIsFile = false,
.backingStoreFormat = VIR_STORAGE_FILE_RAW,
.backingMeta = NULL,
}
Deciding whether to ignore a missing backing file (as in virsh
vol-dumpxml) or report an error (as in security manager sVirt
labeling) requires reading multiple fields. Plus, the format
is hard-coded to treat all network protocols as end-of-the-chain,
as if they were raw. By the end of this patch series, the goal
is to instead represent these three situations as:
{ .path = "one",
.canonPath = "/path/to/one",
.type = VIR_STORAGE_TYPE_FILE,
.format = VIR_STORAGE_FILE_QCOW2,
.backingStoreRaw = "good",
.backingMeta = {
.path = "good",
.canonPath = "/path/to/good",
.type = VIR_STORAGE_TYPE_FILE,
.format = VIR_STORAGE_FILE_RAW,
.backingStoreRaw = NULL,
.backingMeta = NULL,
}
}
{ .path = "two",
.canonPath = "/path/to/two",
.type = VIR_STORAGE_TYPE_FILE,
.format = VIR_STORAGE_FILE_QCOW2,
.backingStoreRaw = "missing",
.backingMeta = NULL,
}
{ .path = "three",
.canonPath = "/path/to/three",
.type = VIR_STORAGE_TYPE_FILE,
.format = VIR_STORAGE_FILE_QCOW2,
.backingStoreRaw = "gluster://server/vol/img",
.backingMeta = {
.path = "gluster://server/vol/img",
.canonPath = "gluster://server/vol/img",
.type = VIR_STORAGE_TYPE_NETWORK,
.format = VIR_STORAGE_FILE_RAW,
.backingStoreRaw = NULL,
.backingMeta = NULL,
}
}
or, for the second file, maybe also allowing:
{ .path = "two",
.canonPath = "/path/to/two",
.type = VIR_STORAGE_TYPE_FILE,
.format = VIR_STORAGE_FILE_QCOW2,
.backingStoreRaw = "missing",
.backingMeta = {
.path = "missing",
.canonPath = NULL,
.type = VIR_STORAGE_TYPE_NONE,
.format = VIR_STORAGE_FILE_NONE,
.backingStoreRaw = NULL,
.backingMeta = NULL,
}
}
* src/util/virstoragefile.h (_virStorageFileMetadata): Add
path, canonPath, relDir, type, and format fields. Reorder
existing fields, and add lots of comments.
* src/util/virstoragefile.c (virStorageFileFreeMetadata): Clean
new fields.
(virStorageFileGetMetadataInternal)
(virStorageFileGetMetadataFromFDInternal): Start populating new
fields.
Signed-off-by: Eric Blake <eblake@redhat.com>
Right now, we are allocating virStorageFileMetadata near the bottom
of the callchain, only after we have identified that we are visiting
a file (and not a network resource). I'm hoping to eventually
support parsing the backing chain from XML, where the backing chain
crawl then validates what was parsed rather than allocating a fresh
structure. Likewise, I'm working towards a setup where we have a
backing element even for networks. Both of these use cases are
easier to code if the allocation is hoisted earlier.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal)
(virStorageFileGetMetadataFromFDInternal): Change signature.
(virStorageFileGetMetadataFromBuf)
(virStorageFileGetMetadataRecurse, virStorageFileGetMetadata):
Update callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous patch started a separation of error messages
reported against the user-specified name, vs. tracking the
canonical path that was actually opened. This patch extends
that notion, by hoisting directory detection up front, passing
the canonical path through the entire call chain, and
simplifying lower-level functions that can now assume that
a canonical path and directory have been supplied.
* src/util/virstoragefile.c
(virStorageFileGetMetadataFromFDInternal)
(virStorageFileGetMetadataInternal): Add parameter, require
directory.
(virFindBackingFile): Require directory.
(virStorageFileGetMetadataFromFD): Pass canonical path.
(virStorageFileGetMetadataFromBuf): Likewise.
(virStorageFileGetMetadata): Determine initial directory.
Signed-off-by: Eric Blake <eblake@redhat.com>
Refactor the function to avoid multiple wrappers splitting identical
fields from the now common metadata struct.
The refactor is done by folding in the wrapper used for disk sources
which allows us to lookup secrets via the secret driver. This may allow
using stored secrets for snapshot disk images too in the future.
Now that we store all metadata about a storage image in a
virStorageSource struct let's use it also to store information needed by
the storage driver to access and do operations on the files.
https://bugzilla.redhat.com/show_bug.cgi?id=1024159
If adding a volume to a storage pool fails during the CreateXML or
CreateXMLFrom API's, we don't want to adjust the available and
allocation values for the storage pool during storageVolDelete
since we haven't adjusted the values for the create.
Refactor storageVolDelete() a bit to create a storageVolDeleteInternal()
which will handle the primary deletion activities. Add a parameter
updateMeta which will signify whether to update the values or not.
Adjust the calls from CreateXML and CreateXMLFrom to directly call the
DeleteInternal with the pool lock held. This does bypass the call
to virStorageVolDeleteEnsureACL().
While trying to refactor the backing file chain, I noticed that
if you have a self-referential qcow2 file via a relative name:
qemu-img create -f qcow2 loop 10M
qemu-img rebase -u -f qcow2 -F qcow2 -b loop loop
then libvirt was creating a chain 2 deep before realizing it
had hit a loop; furthermore, virStorageFileChainCheckBroken
was not identifying the chain as broken. With this patch,
the loop is detected when the chain is only 1 deep; still
enough for storage volume XML to display the file, but now
with a proper error report about where the loop was found.
This patch adds a parameter to virStorageFileGetMetadataRecurse,
so that errors at the top of the chain remain unchanged; messages
issued for backing files now use the name provided by the user
instead of the canonical name (for VDSM, which uses relative
symlinks to device mapper block devices, this is actually more
useful).
* src/util/virstoragefile.c (virStorageFileGetMetadataRecurse):
Add parameter, require canonical path up front. Mark chain
broken on OOM or loop detection.
(virStorageFileGetMetadata): Pass in canonical name.
Signed-off-by: Eric Blake <eblake@redhat.com>
Fix incorrect ATTRIBUTE_NONNULL usage introduced in 17b17565
which caused build failure:
bhyve/bhyve_driver.c:127:48: error: expected ')'
bhyveDriverGetCapabilities(bhyveConnPtr driver ATTRIBUTE_NONNULL)
^
bhyve/bhyve_driver.c:127:27: note: to match this '('
bhyveDriverGetCapabilities(bhyveConnPtr driver ATTRIBUTE_NONNULL)
Pushed under the build breaker rule.
Commit b9dd878f (util: make it easier to grab only regular command exit)
changed the call semantics of virCommandRun() and therefore of virRun()
too. But lxcCheckNetNsSupport() was not updated.
As consequence of this lxcCheckNetNsSupport always failed and broke LXC.
Signed-off-by: Richard Weinberger <richard@nod.at>
Now that we ditched our custom pthread impl for Win32, we can
use PTHREAD_MUTEX_INITIALIZER for static mutexes. This avoids
the need to use a virOnce one-time global initializer in a
number of places.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since it is an abbreviation, PCI should always be fully
capitalized or full lower case, never Pci.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since it is an abbreviation, USB should always be fully
capitalized or full lower case, never Usb.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since it is an abbreviation, SCSI should always be fully
capitalized or full lower case, never Scsi.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Functions virNetDevRestoreMacAddress() and virNetDevRestoreMacAddress()
allocate memory for variable @path using virAsprintf(), but they
haven't freed that memory before returning out.
Signed-off-by: Zhang bo <oscar.zhangbo@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
At the beginning of the function we gain a reference to the driver
capabilities. Then, we call format function (*) which if failed, unref
over caps is called. Then, at the end another unref occurs.
* - Moreover, the format was not called over gained caps, but over
privconn->caps directly which is not allowed anymore.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The driver passed as the only argument to the function should never be
NULL so there's no need to check it. After removing it, the whole
function collapses to a single line doing ref over driver
capabilities.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since b15a2bbd we have the new bhyve_capabilities.[ch] files.
However, the copyright is held by both Roman and Semihalf.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I noticed that the apparmor code could request metadata even
for a cdrom with no media, which would cause a memory leak of
the hash table used to look for loops in the backing chain.
But even before that, we blindly dereferenced the path for
printing a debug statement, so it is just better to enforce
that this is only used on non-NULL names.
* src/util/virstoragefile.c (virStorageFileGetMetadata): Assume
non-NULL path.
* src/util/virstoragefile.h: Annotate this.
* src/security/virt-aa-helper.c (get_files): Fix caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
Other drivers in libvirt (e.g. network, qemu) will automatically
return the "inactive" (persistent configuration) XML of an object when
that object is inactive. The netcf backend of the interface driver
would always try to return the live status XML of the interface, even
when it was down. Although netcf does return valid XML in that case,
for bond interfaces it is missing almost all of its content, including
the <bond> subelement itself, leading to this error message from
"virsh iface-dumpxml" of a bond interface that is inactive:
error: XML error: bond interface misses the bond element
(this is because libvirt's validation of the XML returned by netcf
always requires a <bond> element be present).
This patch modifies the interface driver netcf backend to check if the
interface is inactive, and in that case always return the inactive XML
(which will always have a <bond> element, thus eliminating the error
message, as well as making operation more in line with other drivers.
This fixes the following bug:
https://bugzilla.redhat.com/show_bug.cgi?id=878394
I almost wrote a hash value free function that just called
VIR_FREE, then realized I couldn't be the first person to
do that. Sure enough, it was worth factoring into a common
helper routine.
* src/util/virhash.h (virHashValueFree): New function.
* src/util/virhash.c (virHashValueFree): Implement it.
* src/util/virobject.h (virObjectFreeHashData): New function.
* src/libvirt_private.syms (virhash.h, virobject.h): Export them.
* src/nwfilter/nwfilter_learnipaddr.c (virNWFilterLearnInit): Use
common function.
* src/qemu/qemu_capabilities.c (virQEMUCapsCacheNew): Likewise.
* src/qemu/qemu_command.c (qemuDomainCCWAddressSetCreate):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorGetBlockInfo): Likewise.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Likewise.
* src/util/virclosecallbacks.c (virCloseCallbacksNew): Likewise.
* src/util/virkeyfile.c (virKeyFileParseGroup): Likewise.
* tests/qemumonitorjsontest.c
(testQemuMonitorJSONqemuMonitorJSONGetBlockInfo): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Up until now the traffic control filters for the vNIC QoS were
matching only ip traffic. For egress traffic that was unnoticed
because the unmatched traffic would just go to the default htb class
and be shaped anyway. For ingress, though, since the policing of the
rate is done by the filter itself.
The problem is solved by changing protocol to all and making anything
match the filter.
Bug-Url: https://bugzilla.redhat.com/1084444
Signed-off-by: Antoni S. Puimedon <asegurap@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
nmdm is a FreeBSD driver which allows to create a pair of tty
devices one of which is passed to the guest and second is used
by the client.
This patch adds new 'nmdm' character device type. Its definition
looks this way:
<serial type='nmdm'>
<source master='/dev/nmdm0A' slave='/dev/nmdm0B'/>
</serial>
Master is passed to the hypervisior and slave is used for client
connection.
Also implement domainOpenConsole() for bhyve driver based on that.
Right now, virStorageFileMetadata tracks bool backingStoreIsFile
for whether the backing string specified in metadata can be
resolved as a file (covering both block and regular file
resources) or is treated as a network protocol. But when
merging this struct with virStorageSource, it will be easier
to just actually track which type of resource it is, as well
as have a reserved value for the case where the resource type
is unknown (or had an error during probing).
* src/util/virstoragefile.h (virStorageType): Add a placeholder
value, swap order to match similar public enum.
* src/util/virstoragefile.c (virStorage): Update string mapping.
* src/conf/domain_conf.c (virDomainDiskSourceParse)
(virDomainDiskDefParseXML, virDomainDiskDefFormat)
(virDomainDiskSourceFormat): Adjust clients.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefParseXML):
Likewise.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskExternalOverlayActive)
(qemuDomainSnapshotPrepareDiskExternalOverlayInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
* src/qemu/qemu_command.c (qemuGetDriveSourceString): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit id '18642d10' refactored the call to virCommandRunRegex()
inside a new function virStorageBackendFileSystemNetFindNFSPoolSources(),
but the cut-n-paste didn't remove the "&state". Now that state is passed
by reference, it results in a libvirtd core with a messages entry:
"...internal error: unknown storage pool type Unknow"
For example, the file /proc/cpuinfo for 24 cores PowerPC platform is larger than
the previous maximum size 2KB.
It will fail to start libvirtd with the error message as below:
virFileReadAll: Failed to read file '/proc/cpuinfo': Value too large for defined
data type
virSysinfoRead: internal error Failed to open /proc/cpuinfo
This patch defines CPUINFO_FILE_LEN as 10KB which is enough for most architectures.
Signed-off-by: Olivia Yin <Hong-Hua.Yin@freescale.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The XML config for a CDROM device can be without a source path,
indicating that there is no media present. Without this change
the libxl driver fails to start a guest in that case because
the libxl library checks for the LIBXL_DISK_FORMAT_EMPTY format
type and tries to stat the NULL pointer that gets passed on.
> libxl: error: libxl_device.c:265:libxl__device_disk_set_backend:
> Disk vdev=hdc failed to stat: (null): Bad address
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
There is a domain id in the virDomain structure as well as in the
virDomainObj structure. While the former can become stale the latter
is kept up to date. So it is safer to always (virDomainObjPtr)->def->id
internally.
This will fix issues seen when managing Xen guests through libvirt from
virt-manager (not being able to get domain info after define or reboot).
This was caused both though libxlDomainGetInfo() only but there were
a lot of places that might potentially cause issues, too.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Commit 5b3492fa aimed to fix this and caught one error but exposed
another one. When agent command is being executed and the thread
waiting for the reply is woken up by an event (e.g. EOF in case of
shutdown), the command finishes with no data (rxObject == NULL), but
no error is reported, since this might be desired by the caller
(e.g. suspend through agent). However, in other situations, when the
data are required (e.g. getting vCPUs), we proceed to getting desired
data out of the reply, but none of the virJSON*() functions works well
with NULLs. I chose the way of a new parameter for qemuAgentCommand()
function that specifies whether reply is required and behaves
according to that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1058149
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When looking up a net device by a MAC and PCI address, it is possible
that we've got a match on the MAC address but failed to match the
PCI address.
In that case, outputting just the MAC address can be confusing.
Partially resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=872028
Every caller checked the return value and logged an error
- one if no device with the specified MAC was found,
other if there were multiple devices matching the MAC address
(except for qemuDomainUpdateDeviceConfig which logged the same
message in both cases).
Move the error reporting into virDomainNetFindIdx, since in both cases,
we couldn't find one single match - it's just the error messages that
differ.
Currently VolOpen notifies the user of a potentially non-fatal failure by
returning -2 and logging a VIR_WARN or VIR_INFO. Unfortunately most
callers treat -2 as fatal but don't actually report any message with
the error APIs.
Rename the VOL_OPEN_ERROR flag to VOL_OPEN_NOERROR. If NOERROR is specified,
we preserve the current behavior of returning -2 (there's only one caller
that wants this).
However in the default case, only return -1, and actually use the error
APIs. Fix up a couple callers as a result.
Coverity complains about a possible leak of seclabel if
!sec_managers[i]->drv->domainGenSecurityLabel is true
and the seclabel might be overwritten by the next iteration
of the loop.
This leak should never happen, because every security driver
has domainGenSecurityLabel defined.
A future patch will merge virStorageFileMetadata and virStorageSource,
but I found it easier to do if both structs use the same information
for tracking whether a source file needs encryption keys.
* src/util/virstoragefile.h (_virStorageFileMetadata): Prepare
full encryption struct instead of just a bool.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Use transfer semantics.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal):
Populate struct.
(virStorageFileFreeMetadata): Adjust clients.
* tests/virstoragetest.c (testStorageChain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that each virStorageSource can track allocation information,
and given that we already have the information without extra
syscalls, it's easier to just always populate the information
directly into the struct than it is to sometimes pass the address
of the struct members down the call chain.
* src/storage/storage_backend.h (virStorageBackendUpdateVolInfo)
(virStorageBackendUpdateVolTargetInfo)
(virStorageBackendUpdateVolTargetInfoFD): Update signature.
* src/storage/storage_backend.c (virStorageBackendUpdateVolInfo)
(virStorageBackendUpdateVolTargetInfo)
(virStorageBackendUpdateVolTargetInfoFD): Always populate struct
members instead.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol): Update client.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget)
(virStorageBackendFileSystemRefresh)
(virStorageBackendFileSystemVolRefresh): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalMakeVol): Likewise.
* src/storage/storage_backend_mpath.c
(virStorageBackendMpathNewVol): Likewise.
* src/storage/storage_backend_scsi.c
(virStorageBackendSCSINewLun): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
One of the features of qcow2 is that a wrapper file can have
more capacity than its backing file from the guest's perspective;
what's more, sparse files make tracking allocation of both
the active and backing file worthwhile. As such, it makes
more sense to show allocation numbers for each file in a chain,
and not just the top-level file. This sets up the fields for
the tracking, although it does not modify XML to display any
new information.
* src/util/virstoragefile.h (_virStorageSource): Add fields.
* src/conf/storage_conf.h (_virStorageVolDef): Drop redundant
fields.
* src/storage/storage_backend.c (virStorageBackendCreateBlockFrom)
(createRawFile, virStorageBackendCreateQemuImgCmd)
(virStorageBackendCreateQcowCreate): Update clients.
* src/storage/storage_driver.c (storageVolDelete)
(storageVolCreateXML, storageVolCreateXMLFrom, storageVolResize)
(storageVolWipeInternal, storageVolGetInfo): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget)
(virStorageBackendFileSystemRefresh)
(virStorageBackendFileSystemVolResize)
(virStorageBackendFileSystemVolRefresh): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalMakeVol)
(virStorageBackendLogicalCreateVol): Likewise.
* src/storage/storage_backend_scsi.c
(virStorageBackendSCSINewLun): Likewise.
* src/storage/storage_backend_mpath.c
(virStorageBackendMpathNewVol): Likewise.
* src/storage/storage_backend_rbd.c
(volStorageBackendRBDRefreshVolInfo)
(virStorageBackendRBDCreateImage): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol)
(virStorageBackendDiskCreateVol): Likewise.
* src/storage/storage_backend_sheepdog.c
(virStorageBackendSheepdogBuildVol)
(virStorageBackendSheepdogParseVdiList): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/conf/storage_conf.c (virStorageVolDefFormat)
(virStorageVolDefParseXML): Likewise.
* src/test/test_driver.c (testOpenVolumesForPool)
(testStorageVolCreateXML, testStorageVolCreateXMLFrom)
(testStorageVolDelete, testStorageVolGetInfo): Likewise.
* src/esx/esx_storage_backend_iscsi.c (esxStorageVolGetXMLDesc):
Likewise.
* src/esx/esx_storage_backend_vmfs.c (esxStorageVolGetXMLDesc)
(esxStorageVolCreateXML): Likewise.
* src/parallels/parallels_driver.c (parallelsAddHddByVolume):
Likewise.
* src/parallels/parallels_storage.c (parallelsDiskDescParseNode)
(parallelsStorageVolDefineXML, parallelsStorageVolCreateXMLFrom)
(parallelsStorageVolDefRemove, parallelsStorageVolGetInfo):
Likewise.
* src/vbox/vbox_tmpl.c (vboxStorageVolCreateXML)
(vboxStorageVolGetXMLDesc): Likewise.
* tests/storagebackendsheepdogtest.c (test_vdi_list_parser):
Likewise.
* src/phyp/phyp_driver.c (phypStorageVolCreateXML): Likewise.
A fairly smooth transition. And now that domain disks and
storage volumes share a common struct, it opens the doors for
a future patch to expose more details in the XML for both
objects.
* src/conf/storage_conf.h (_virStorageVolTarget): Delete.
(_virStorageVolDef): Use common type.
* src/conf/storage_conf.c (virStorageVolDefFree)
(virStorageVolTargetDefFormat): Update clients.
* src/storage/storage_backend.h: Likewise.
* src/storage/storage_backend.c
(virStorageBackendDetectBlockVolFormatFD)
(virStorageBackendUpdateVolTargetInfo)
(virStorageBackendUpdateVolTargetInfoFD): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Another step towards unification of structures. While we might
not expose everything in XML via domain disk as we do for
storage volume pointer, both places want to deal with (at least
part of) the backing chain; therefore, moving towards a single
struct usable from both contexts will make the backing chain
code more reusable.
* src/conf/storage_conf.h (_virStoragePerms)
(virStorageTimestamps): Move...
* src/util/virstoragefile.h: ...here.
(_virStorageSource): Add more fields.
* src/util/virstoragefile.c (virStorageSourceClear): Clean
additional fields.
Signed-off-by: Eric Blake <eblake@redhat.com>
Some preparatory work before consolidating storage volume
structs with the rest of virstoragefile. Making these
changes allows a volume target to be much closer to (a
subset of) the virStorageSource struct.
Making perms be a pointer allows it to be optional if we
have a storage pool that doesn't expose permissions in a
way we can access. It also allows future patches to
optionally expose permissions details learned about a disk
image via domain <disk> listings, rather than just
limiting it to storage volume listings.
Disk partition types was only used by internal code to
control what type of partition to create when carving up
an MS-DOS partition table storage pool (and is not used
for GPT partition tables or other storage pools). It was
not exposed in volume XML, and as it is more closely
related to extent information of the overall block device
than it is to the <target> information describing the host
file. Besides, if we ever decide to expose it in XML down
the road, we can move it back as needed.
* src/conf/storage_conf.h (_virStorageVolTarget): Change perms to
pointer, enhance comments. Move partition type...
(_virStorageVolSource): ...here.
* src/conf/storage_conf.c (virStorageVolDefFree)
(virStorageVolDefParseXML, virStorageVolTargetDefFormat): Update
clients.
* src/storage/storage_backend_fs.c (createFileDir): Likewise.
* src/storage/storage_backend.c (virStorageBackendCreateBlockFrom)
(virStorageBackendCreateRaw, virStorageBackendCreateExecCommand)
(virStorageBackendUpdateVolTargetInfoFD): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalCreateVol): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol)
(virStorageBackendDiskPartTypeToCreate): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that we have a dedicated type for representing a disk source,
we might as well parse and format directly into that type instead
of piecemeal into pointers to members of the type.
* src/conf/domain_conf.h (virDomainDiskSourceDefFormatInternal)
(virDomainDiskSourceDefParse): Rename...
(virDomainDiskSourceFormat, virDomainDiskSourceParse): ...and
compress signatures.
* src/conf/domain_conf.c (virDomainDiskSourceParse)
(virDomainDiskSourceFormat): Rewrite to use common struct.
(virDomainDiskSourceDefFormat): Delete.
(virDomainDiskDefParseXML, virDomainDiskDefFormat): Update
callers.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefParseXML)
(virDomainSnapshotDiskDefFormat): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The phyp code claims that it wants a non-zero value, but actually
enforces a capacity of zero. It has been this way since commit
ebc46fe in June 2010. Bummer that it has my name as the committer
- I guess I should have been much more stubborn about not blindly
taking someone else's 1600-line patch.
* src/phyp/phyp_driver.c (phypStorageVolCreateXML): Use correct
logic.
Signed-off-by: Eric Blake <eblake@redhat.com>
On all the places where qemuAgentComand() was called, we did a check
for errors in the reply. Unfortunately, some of the places called
qemuAgentCheckError() without checking for non-null reply which might
have resulted in a crash.
So this patch makes the error-checking part of qemuAgentCommand()
itself, which:
a) makes it look better,
b) makes the check mandatory and, most importantly,
c) checks for the errors if and only if it is appropriate.
This actually fixes a potential crashers when qemuAgentComand()
returned 0, but reply was NULL. Having said that, it *should* fix the
following bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1058149
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Noticed during my work on storage struct cleanups.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskPartBoundaries): Fix spelling errors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that we have a common struct, it's time to start using it!
Since external snapshots make a longer backing chain, it is
only natural to use the same struct for the file created by
the snapshot as what we use for <domain> disks.
* src/conf/snapshot_conf.h (_virDomainSnapshotDiskDef): Use common
struct instead of open-coded duplicate fields.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefClear)
(virDomainSnapshotDiskDefParseXML, virDomainSnapshotAlignDisks)
(virDomainSnapshotDiskDefFormat)
(virDomainSnapshotDiskGetActualType): Adjust clients.
* src/qemu/qemu_conf.c (qemuTranslateSnapshotDiskSourcePool):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskGetSourceString)
(qemuDomainSnapshotCreateInactiveExternal)
(qemuDomainSnapshotPrepareDiskExternalOverlayActive)
(qemuDomainSnapshotPrepareDiskExternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
* src/storage/storage_driver.c
(virStorageFileInitFromSnapshotDef): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Move some functions out of domain_conf for use in the next
patch where snapshot starts to directly use structs in
virstoragefile.
* src/conf/domain_conf.c (virDomainDiskDefFree)
(virDomainDiskSourcePoolDefParse): Adjust callers.
(virDomainDiskSourceDefClear, virDomainDiskSourcePoolDefFree)
(virDomainDiskAuthClear): Move...
* src/util/virstoragefile.c (virStorageSourceClear)
(virStorageSourcePoolDefFree, virStorageSourceAuthClear): ...and
rename.
* src/conf/domain_conf.h (virDomainDiskAuthClear): Drop
declaration.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Adjust
caller.
* src/util/virstoragefile.h: Declare them.
* src/libvirt_private.syms (virstoragefile.h): Export them.
Signed-off-by: Eric Blake <eblake@redhat.com>
The only remaining reason that virt-login-shell was trying to
link against virstoragefile was because of a call to
virStorageFileFormatTypeToString when spawning a qemu-nbd
process - but setuid processes shouldn't be spawning qemu-nbd.
* src/util/virfile.c (virFileLoopDeviceAssociate)
(virFileNBDDeviceAssociate): Cripple in setuid builds.
* src/Makefile.am (libvirt_setuid_rpc_client_la_SOURCES):
Drop virstoragefile from the list.
Signed-off-by: Eric Blake <eblake@redhat.com>
The code in virstoragefile.c is getting more complex as I
consolidate backing chain handling code. But for the setuid
virt-login-shell, we don't need to crawl backing chains. It's
easier to audit things for setuid security if there are fewer
files involved, so this patch moves the one function that
virFileOpen() was actually relying on to also live in virfile.c.
* src/util/virstoragefile.c (virStorageFileIsSharedFS)
(virStorageFileIsSharedFSType): Move...
* src/util/virfile.c (virFileIsSharedFS, virFileIsSharedFSType):
...to here, and rename.
(virFileOpenAs): Update caller.
* src/security/security_selinux.c
(virSecuritySELinuxSetFileconHelper)
(virSecuritySELinuxSetSecurityAllLabel)
(virSecuritySELinuxRestoreSecurityImageLabelInt): Likewise.
* src/security/security_dac.c
(virSecurityDACRestoreSecurityImageLabelInt): Likewise.
* src/qemu/qemu_driver.c (qemuOpenFileAs): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/util/virstoragefile.h: Adjust declarations.
* src/util/virfile.h: Likewise.
* src/libvirt_private.syms (virfile.h, virstoragefile.h): Move
symbols as appropriate.
Signed-off-by: Eric Blake <eblake@redhat.com>
With this patch, all information related to a host resource in
a storage file backing chain now lives in util/virstoragefile.h.
The next step will be to consolidate various places that have
been tracking backing chain details to all use a common struct.
The changes to tools/Makefile.am were made necessary by the
fact that virstorageencryption includes uses of libxml, and is
now pulled in by inclusion from virstoragefile.h. No
additional libraries are linked into the final image, and in
comparison, the build of the setuid library in src/Makefile.am
already was using LIBXML_CFLAGS via AM_CFLAGS.
* src/conf/domain_conf.h (virDomainDiskSourceDef): Move...
* src/util/virstoragefile.h (virStorageSource): ...and rename.
* src/conf/domain_conf.c (virDomainDiskSourceDefClear)
(virDomainDiskAuthClear): Adjust clients.
* tools/Makefile.am (virt_login_shell_CFLAGS)
(virt_host_validate_CFLAGS): Add libxml headers.
Signed-off-by: Eric Blake <eblake@redhat.com>
This one is a relatively easy move. We don't ever convert the
enum to or from strings (it is inferred from other elements in
the xml, rather than directly represented).
* src/conf/domain_conf.h (virDomainDiskSecretType): Move...
* src/util/virstoragefile.h (virStorageSecreteType): ...and
rename.
* src/conf/domain_conf.c (virDomainDiskSecretType): Drop unused
enum conversion.
(virDomainDiskAuthClear, virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Adjust clients.
* src/qemu/qemu_command.c (qemuGetSecretString): Likewise.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePoolAuth):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Another struct being moved to util. This one doesn't have as
much use yet, thankfully.
* src/conf/domain_conf.h (virDomainDiskSourcePoolMode)
(virDomainDiskSourcePoolDef): Move...
* src/util/virstoragefile.h (virStorageSourcePoolMode)
(virStorageSourcePoolDef): ...and rename.
* src/conf/domain_conf.c (virDomainDiskSourcePoolDefFree)
(virDomainDiskSourceDefClear, virDomainDiskSourcePoolDefParse)
(virDomainDiskDefParseXML, virDomainDiskSourceDefParse)
(virDomainDiskSourceDefFormatInternal)
(virDomainDiskDefForeachPath, virDomainDiskSourceIsBlockType):
Adjust clients.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virstoragefile.h): ...as appropriate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Encryption keys can be associated with each source file in a
backing chain; as such, this file belongs more in util/ where
it can be used by virstoragefile.h.
* src/conf/storage_encryption_conf.h: Rename...
* src/util/virstorageencryption.h: ...to this.
* src/conf/storage_encryption_conf.c: Rename...
* src/util/virstorageencryption.c: ...to this.
* src/Makefile.am (ENCRYPTION_CONF_SOURCES, CONF_SOURCES)
(UTIL_SOURCES): Update to new file names.
* src/libvirt_private.syms: Likewise.
* src/conf/domain_conf.h: Update client.
* src/conf/storage_conf.h: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
In order to reuse the newly-created host-side disk struct in
the virstoragefile backing chain code, I first have to move
it to util/. This starts the process, by first moving the
security label structures.
* src/conf/domain_conf.h (virDomainDefGenSecurityLabelDef)
(virDomainDiskDefGenSecurityLabelDef, virSecurityLabelDefFree)
(virSecurityDeviceLabelDefFree, virSecurityLabelDef)
(virSecurityDeviceLabelDef): Move...
* src/util/virseclabel.h: ...to new file.
(virSecurityLabelDefNew, virSecurityDeviceLabelDefNew): Rename the
GenSecurity functions.
* src/qemu/qemu_process.c (qemuProcessAttach): Adjust callers.
* src/security/security_manager.c (virSecurityManagerGenLabel):
Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/util/virseclabel.c: New file.
* src/conf/domain_conf.c: Move security code, and fix fallout.
* src/Makefile.am (UTIL_SOURCES): Build new file.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virseclabel.h): ...to new section.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1072714
Use the "gluster" command line tool to retrieve information about remote
volumes on a gluster server to allow storage pool source lookup.
Unfortunately gluster doesn't provide a management library so that we
could use that directly, instead the RPC calls are hardcoded in the
command line tool.
Extract the NFS related stuff into a separate function and tidy up the
rest of the code so we can reuse it to add gluster backend detection.
Additionally avoid reporting of errors from "showmount" and return an
empty source list instead. This will help when adding other detection
backends.
According to our documentation the "key" value has the following
meaning: "Providing an identifier for the volume which identifies a
single volume." The currently used keys for gluster volumes consist of
the gluster volume name and file path. This can't be considered unique
as a different storage server can serve a volume with the same name.
Unfortunately I wasn't able to figure out a way to retrieve the gluster
volume UUID which would avoid the possibility of having two distinct
keys identifying a single volume.
Use the full URI as the key for the volume to avoid the more critical
ambiguity problem and document the possible change to UUID.
On failures, virBhyveProcessStart() does not cleanup network
interfaces that could be created by virBhyveProcessBuildBhyveCmd(),
which results in a leaked tap device.
To fix that, extract network cleanup code to bhyveNetCleanup()
and use it in cleanup stage of virBhyveProcessStart().
When virStorageFileGetMetadata is called with NULL path argument, the
invalid pointer boils down through the recursive worker and is caught by
virHashAddEntry which is thankfully resistant to NULL arguments. As it
doesn't make sense to pursue backing chains of NULL volumes, exit
earlier.
This was noticed in the virt-aahelper-test with a slightly modified
codebase.
The libgfapi function glfs_fini doesn't tolerate NULL pointers. Add a
check on the error paths as it's possible to crash libvirtd if the
gluster volume can't be initialized.
