When parsing the config, we look for the SCSI controllers one by one,
remembering their models, then let virDomainDefAddImplicitDevices
add them if any SCSI disk is using them.
Since these controllers are not really implicit (they are present
in the source config), add them explicitly.
This patch maintains the behavior of not adding a controller
if it was present in the config, but no disk was using it.
This also resolves the memory leak of virVMXParseConfig overwriting
the video device added by calling virDomainDefAddImplicitDevices
before the parsing is finished.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
For selected hostdev types, we validate that the address type
matches the subsystem type when parsing the XML.
Move it to the validation phase, to allow extending the checks
to other subsystem types without making existing domains disappear.
At the time the check was written virtuozzo did not use disabled items in boot
order configuration. Boot items were always enabled. Now they can be disabled
as well. Supporting such items is easy - they just should be ignored.
HTML5 obsoletes the 'name' attribute in favor of 'id',
and our TOC generator apparently follows the recommendation
to the letter, resulting in a broken TOC if you use the
old-school attribute.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When parsing bootable devices, we maintain a bitmap of used
<boot order=""> elements. Use it in the post-parse function
to figure out whether the user tried to mix per-device and
per-domain boot elements.
This removes the need to count them twice.
These functions contain the post-parse steps common for all drivers.
Rename it to use the 'Common' prefix, instead of the vagueness
of 'Internal', leaving 'Internal' available for other vague uses.
Since the source element is parsed only once for these type of
character devices we don't have to use temporary variable and
check whether the variable was already set.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The extra check whether (connect|bind)(Host|Service) was set is
required because for UDP chardev there can be two source elements.
Without the check there could be a memory leak.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In order to ensure that the default protocol is RAW, explicitly
assigning VIR_DOMAIN_CHR_TCP_PROTOCOL_RAW = 0.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Currently we accept and correctly parse this chardev XML:
...
<channel type='tcp'>
<source mode='connect'/>
<source mode='bind' host='localhost'/>
<source service='4567'/>
<target type='virtio' name='test'/>
</channel>
...
The parsed formatted XML is:
...
<channel type='tcp'>
<source mode='connect' host='localhost' service='4567'/>
<target type='virtio' name='test'/>
</channel>
...
That behavior is super wrong and should not be allowed. If you notice
the current parse takes the first found attribute and uses that value,
so for example from the "<source mode='bind' host='localhost'/>" only
the "host" attribute is used. It works the same way for all possible
attributes that we are able to parse for source element.
This patch enforces providing only one source element for all character
devices, only for UDP type we allow to provide two source elements
since you can specify both modes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Since its introduction in commit 874e65aa, if someone requests:
<os><bios useserial="yes"/><os/>
we report an error if we cannot successfully count the number
of serial devices via an XPath query.
Instead of fixing the check (and moving it to the validation phase,
to prevent existing domains from disappearing), drop it completely.
For QEMU, the number of serials is checked when building the command
line.
When security drivers are active but confinement is not enabled,
there is no need to autogenerate <seclabel> elements when starting
a domain def that contains no <seclabel> elements. In fact,
autogenerating the elements can result in needless save/restore and
migration failures when the security driver is not active on the
restore/migration target.
This patch changes the virSecurityManagerGenLabel function in
src/security_manager.c to only autogenerate a <seclabel> element
if none is already defined for the domain *and* default
confinement is enabled. Otherwise the needless <seclabel>
autogeneration is skipped.
Resolves: https://bugzilla.opensuse.org/show_bug.cgi?id=1051017
The virDomainDef created by testBuildDomainDef in securityselinuxtest
adds a seclabel but does not increment nseclabels. Also, it should
populate seclabel->model with 'selinux'.
While at it, use the secdef itself to populate values instead of
the indirection through def->seclabels[0].
It was not entirely clear that PARALLEL_SHUTDOWN setting is applied only
when the desired action is "shutdown".
Signed-off-by: Lily Zhu <lizhu@redhat.com>
I mistakenly thought pSeries guests supported 32 PHBs,
but it turns out they only support 31. Validate the
target index accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1479647
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Validation should happen after parsing, so the proper
location for it is virDomainControllerDefValidate()
rather than virDomainControllerDefParseXML().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Split one of the existing tests to ensure both configuration
errors it contained cause a failure, and introduce a new
test case.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Use the new facility which allows to ignore failures in post parse
callbacks if they are not fatal so that VM configs are not lost if the
emulator binary is missing.
If qemuCaps can't be populated on daemon restart skip certain portions
of the post parse callbacks during config reload and re-run the callback
during VM startup.
This fixes VMs vanishing if the emulator binary was broken or
uninstalled and libvirtd was restarted.
qemuDomainControllerDefPostParse assigns the default USB controller
model when it was not specified by the user. Skip this step if @qemuCaps
is missing so that we don't fill wrong data. This will then be fixes by
re-running the post parse callback.
Report the given GIC version as unsupported if @qemuCapsi is NULL. This
will be helpful to run post parse callbacks even if qemu is not
currently installed.
If qemuCaps are not present, just return the original machine type name.
This will help in situations when qemuCaps is not available in the post
parse callback.
Some failures of the post parse callback can be tolerated. This is
specifically desired when loading the configs of existing VMs. In such
case the post parse callback should not really be modifying anything
in the definition.
This patch adds a parse flag VIR_DOMAIN_DEF_PARSE_ALLOW_POST_PARSE_FAIL
which will allow the callbacks to report non-fatal failures by returning
a positive return value. In such case the field 'postParseFailed' in the
domain definition is set to true, to notify the drivers that the
callback failed and possibly needs to be re-run.
Post parse callbacks will need to be able to signal that they failed
non-fatally. This means that we need to return the value returned by the
callback without modification.
The domain post parse callback, domain address callback and the domain
device callback (for every single device) would each grab qemuCaps for
the current emulator. This is quite wasteful. Use the new callback to do
this just once.
Some drivers use def-specific private data across callbacks (e.g.
qemuCaps in the qemu driver). Currently it's mostly allocated in every
single callback. This is rather wasteful, given that every single call
to the device callback allocates it.
The new callback will allocate the data (if not provided externally) and
then use it for the VM, address and device post parse callbacks.
Add yet another post parse callback, which is executed prior the real
one without @parseOpaque. This is meant to set basics before
@parseOpaque (in case of the qemu driver qemuCaps) can be allocated.
This callback will allow to optimize passing of custom parseOpaque
through the callbacks.
The helper returns true if a string contains any of the given chars.
virStringHasControlChars can be reimplemented using that helper.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Let this new method handle the device object we obtained from the
monitor in order to enhance readability.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
