The libxl driver has suffered an identity crisis since its introduction.
It took on the name 'libxl' since at the time libvirt already contained
a 'xen' driver for the old Xen toolstack implementation. 'libxl' is short
for libxenlight, which is often called xenlight. Unfortunately all forms
of the name are used in the libxl driver.
The only remaining use of the 'xenlight' form is when interacting with
the host device manager, which is difficult to change since it would
cause problems when upgrading the driver.
Rename the #define to make it clear the 'xenlight' form is internal and
add a comment describing why the name exists and that its use should be
discouraged.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The libxl driver declares its name as 'Xen' through the public
virConnectGetType() API. In the virHypervisorDriver table the name is
set to 'xenlight'. To add more confusion, the name is set to 'LIBXL'
in the virStateDriver. For consistency, use the same name in the driver
tables as reported in the public virConnectGetType() API.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 54a401af478 split out DriverConfigInit from DriverConfigNew, but
then called it a bit late from libxlStateInitialize. The cfg is used in
libxlDriverConfigLoadFile and when uninitialized results in a crash.
Calling DriverConfigInit immediately after DriverConfigNew fixes the
crash.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some of the node device APIs are a little odd because they accept a
virNodeDevicePtr object but are still implemented by the virt drivers.
The first thing the virt drivers need to do is get the XML config
associated with the node device, and that means talking to the node
device driver.
This worked previously because with monolithic libvirtd, both the
virt driver and node device driver were in the same daemon and thus
a single virConnectPtr can talk to both drivers.
With the split daemon world though, the virNodeDevicePtr passed into
the APIs is associated with the QEMU driver virConnectPtr, which has
no ability to invoke APIs against the node device driver. We must thus
get a duplicate virNodeDevicePtr object which is associated with a
virConnectPtr for the node device driver.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Take the parts affected by the host state out of DriverConfigNew
and put them into a separate function.
Adjust all the callers to call both functions.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now, that every use of virAtomic was replaced with its g_atomic
equivalent, let's remove the module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With Credit2 being Xen default scheduler, it's definitely the case to
allow Credit2's scheduling parameters to be get and set via libvirt.
This is easy, as Credit and Credit2 have (at least as of now) the very
same parameters ('weight' and 'cap'). So we can just let credit2 pass
the scheduler-type check and the same code will work for both.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The intent here is to allow the virt drivers to be run directly embedded
in an arbitrary process without interfering with libvirtd. To achieve
this they need to store all their configuration & state in a separate
directory tree from the main system or session libvirtd instances.
This can be useful for doing testing of the virt drivers in "make check"
without interfering with the user's own libvirtd instances.
It can also be used for applications using KVM/QEMU as a piece of
infrastructure to build an service, rather than for general purpose
OS hosting. A long standing example is libguestfs, which would prefer
if its temporary VMs did show up in the main libvirtd VM list, because
this confuses apps such as OpenStack Nova. A more recent example would
be Kata which is using KVM as a technology to build containers.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The libxl driver already tries to call shutdown inhibit callback in the
right places, but only if it's set. That last part was missing,
resulting in premature shutdown when running libvirtd
--timeout=...
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Libvirt's original atomic ops impls were largely copied
from GLib's code at the time. The only API difference
was that libvirt's virAtomicIntInc() would return a
value, but g_atomic_int_inc was void. We thus use
g_atomic_int_add(v, 1) instead, though this means
virAtomicIntInc() now returns the original value,
instead of the new value.
This rewrites libvirt's impl in terms of g_atomic_int*
as a short term conversion. The key motivation was to
quickly eliminate use of GNULIB's verify_expr() macro
which is not a direct match for G_STATIC_ASSERT_EXPR.
Long term all the callers should be updated to use
g_atomic_int* directly.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_get_real_time() returns the time since epoch in microseconds.
It uses gettimeofday() internally while libvirt used clock_gettime
because it is declared async signal safe. In practice gettimeofday
is also async signal safe *provided* the timezone parameter is
NULL. This is indeed the case in g_get_real_time().
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If we use glib alloc functions, we can drop the 'cleanup' label
and @rv variable and also simplify the code a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Some variables are not used outside of the for() loop. Move their
declaration to clean up the code a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
When using the monolithic daemon, then dom->conn has all driver
tables filled in properly and thus it's safe to call an API other
than virDomain*(). However, when using split daemons then
dom->conn has only hypervisor driver table set
(dom->conn->driver) and the rest is NULL. Therefore, if we want
to call a non-domain API (virNetworkLookupByName() in this case),
we have obtain the cached connection object accessible via
virGetConnectNetwork().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This parameter is now unused and can be removed entirely.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To enable the virCapsPtr parameter to the post parse method to be
eliminated, the drivers must fetch the virCapsPtr from their own
driver via the opaque parameter, or use an alternative approach
to validate the parsed data.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Moving their instance parameter to be the first one, and give consistent
ordering of other parameters across all functions. Ensure that the xml
options are passed into both functions in prep for future work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our normal practice is for the object type to be the name prefix, and
the object instance be the first parameter passed in.
Rename these to virDomainObjSave and virDomainDefSave moving their
primary parameter to be the first one. Ensure that the xml options
are passed into both functions in prep for future work.
Finally enforce checking of the return type and mark all parameters
as non-NULL.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
<interface> devices (virDomainNetDef) are a bit different from other
types of devices in that their actual type may come from a network (in
the form of a port connection), and that doesn't happen until the
domain is started. This means that any validation of an <interface> at
parse time needs to be a bit liberal in what it accepts - when
type='network', you could think that something is/isn't allowed, but
once the domain is started and a port is created by the configured
network, the opposite might be true.
To solve this problem hypervisor drivers need to do an extra
validation step when the domain is being started. I recently (commit
3cff23f7, libvirt 5.7.0) added a function to peform such validation
for all interfaces to the QEMU driver -
qemuDomainValidateActualNetDef() - but while that function is a good
single point to call for the multiple places that need to "start" an
interface (domain startup, device hotplug, device update), it can't be
called by the other hypervisor drivers, since 1) it's in the QEMU
driver, and 2) it contains some checks specific to QEMU. For
validation that applies to network devices on *all* hypervisors, we
need yet another interface validation function that can be called by
any hypervisor driver (not just QEMU) right after its network port has
been created during domain startup or hotplug. This patch adds that
function - virDomainActualNetDefValidate(), in the conf directory,
and calls it in appropriate places in the QEMU, lxc, and libxl
drivers.
This new function is the place to put all network device validation
that 1) is hypervisor agnostic, and 2) can't be done until we know the
"actual type" of an interface.
There is no framework for validation at domain startup as there is for
post-parse validation, but I don't want to create a whole elaborate
system that will only be used by one type of device. For that reason,
I just made a single function that should be called directly from the
hypervisors, when they are initializing interfaces to start a domain,
right after conditionally allocating the network port (and regardless
of whether or not that was actually needed). In the case of the QEMU
driver, qemuDomainValidateActualNetDef() is already called in all the
appropriate places, so we can just call the new function from
there. In the case of the other hypervisors, we search for
virDomainNetAllocateActualDevice() (which is the hypervisor-agnostic
function that calls virNetworkPortCreateXML()), and add the call to our
new function right after that.
The new function itself could be plunked down into many places in the
code, but we already have 3 validation functions for network devices
in 2 different places (not counting any basic validation done in
virDomainNetDefParseXML() itself):
1) post-parse hypervisor-agnostic
(virDomainNetDefValidate() - domain_conf.c:6145)
2) post-parse hypervisor-specific
(qemuDomainDeviceDefValidateNetwork() - qemu_domain.c:5498)
3) domain-start hypervisor-specific
(qemuDomainValidateActualNetDef() - qemu_domain.c:5390)
I placed (3) right next to (2) when I added it, specifically to avoid
spreading validation all over the code. For the same reason, I decided
to put this new function right next to (1) - this way if someone needs
to add validation specific to qemu, they go to one location, and if
they need to add validation applying to everyone, they go to the
other. It looks a bit strange to have a public function in between a
bunch of statics, but I think it's better than the alternative of
further fragmentation. (I'm open to other ideas though, of course.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The function now does not return an error so we can drop it fully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In few places we have the following code pattern:
int ret;
... /* @ret is not accessed here */
ret = f(...);
return ret;
This pattern can be written less verbose:
...
return f(...);
This patch was generated with following coccinelle spatch:
@@
type T;
constant C;
expression f;
identifier ret;
@@
-T ret = C;
... when != ret
-ret = f;
-return ret;
+return f;
Afterwards I needed to fix a few places, e.g. comment in
virDomainNetIPParseXML() was removed too because coccinelle
thinks it refers to @ret while in fact it doesn't. Also in few
places it replaced @ret declaration with a few spaces instead of
removing the line. But nothing terribly wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In many cases we used virDomainDiskByName to solely look up disk by
target. We have a new helper now so we can replace it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The callers expect '1' on a successful probe,
so return 1 just like VIR_STRDUP would.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the occurrences of
ignore_value(VIR_STRDUP(a, b));
with
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that all the types using VIR_AUTOUNREF have a cleanup func defined
to virObjectUnref, use g_autoptr instead of VIR_AUTOUNREF.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since commit 44e7f029159ed701b4a1739ac711507ee53790ed
util: rewrite auto cleanup macros to use glib's equivalent
VIR_AUTOPTR aliases to g_autoptr. Replace all of its use by the GLib
macro version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1755303
With the recent work in daemon split and socket activation
daemons can come and go. They can and will be started many times
during a session which results in objects being autostarted
multiple times. This is not optimal. Use
virDriverShouldAutostart() to determine if autostart should be
done or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In some places where virDomainObjListForEach() is called the
passed callback calls virDomainObjListRemoveLocked(). Well, this
is unsafe, because the former only grabs a read lock but the
latter modifies the list.
I've identified the following unsafe calls:
- qemuProcessReconnectAll()
- libxlReconnectDomains()
The rest seem to be safe.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDomainObjCheckActive() returns -1 if domain is not active, not 0.
Fixes cb50436c6f "libxl: implement virDomainPM* functions"
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
After a successful call to libxl_domain_suspend_only(), set domain
state to VIR_DOMAIN_PMSUSPENDED and send lifecycle event.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When running in libvirtd, we are happy for any of the drivers to simply
skip their initialization in virStateInitialize, as other drivers are
still potentially useful.
When running in per-driver daemons though, we want the daemon to abort
startup if the driver cannot initialize itself, as the daemon will be
useless without it.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since qemuDomainDeviceDefPostParse callback requires qemuCaps, we need
to make sure it gets the capabilities stored in the domain's private
data if the domain is running. Passing NULL may cause QEMU capabilities
probing to be triggered in case QEMU binary changed in the meantime.
When this happens while a running domain object is locked, QMP event
delivered to the domain before QEMU capabilities probing finishes will
deadlock the event loop.
QEMU capabilities lookup (via domainPostParseDataAlloc callback) is
hidden inside virDomainDeviceDefPostParseOne with no way to pass
qemuCaps to virDomainDeviceDef* functions. This patch fixes all
remaining paths leading to virDomainDeviceDefPostParse.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.
Several general functions from domain_conf.c were lazily passing NULL as
the parseOpaque pointer instead of letting their callers pass the right
data. This patch fixes all paths leading to virDomainDefCopy to do the
right thing.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The format string for a PCI address is copied over and over
again, often with slight adjustments. Introduce global
VIR_PCI_DEVICE_ADDRESS_FMT macro that holds the formatting string
and use it wherever possible.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fortunately, the code that handles metadata getting or setting is
driver agnostic, so all that is needed from individual hypervisor
drivers is to call the right functions.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1732306
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
