Enable the flags in the status xml2xmtest and add an exaple to the test
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Re-translating a disk type='volume' definition from a storage pool is
not a good idea in cases when the volume might have changed or we might
not have access to the storage driver.
Specific cases are if a storage pool is not activated on daemon restart,
then re-connecting to a VM fails, or if the virt-aa-helper program tries
to setup labelling for apparmor.
Add a new flag which will preserve the translated data in the
definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a disk definition was already translated re-doing it makes no sense.
Skip the translation if the 'actualtype' is already populated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Register autoptr cleanup function for virStorageSourcePoolDef and
refactor the parser to simplify the logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use proper enum type and refactor the formatter accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When loading a secret value fails, the control jumps over to the
'cleanup' label where explicit call to virSecretDefFree()
happens. This is unnecessary as the corresponding variable can be
declared with g_autoptr() after which all error paths can just
return NULL instantly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When loading virSecret configs, the @path variable holds path to
individual config files. In each iteration it is freed explicitly
using VIR_FREE(). Switch it to g_autofree and remove those
explicit calls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanup the virBuildPathInternal() function is no
longer used. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our virBuildPath() constructs a path from given arguments.
Exactly like g_build_filename(), except the latter is more
generic as it uses backslashes on Windows. Therefore, replace the
former with the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In my recent commit of v9.8.0-rc1~7 I've introduced validation
wrt other memory devices. And mostly works, except when doing
memory device update ('virsh update-memory-device') because then
@mem is just parsed <memory/> device XML and thus its pointer is
not in the vm->def->mem, yet. Thus my algorithm which skips over
the same entry fails. Fortunately, we require full device XML on
device update and thus we can use device address and aliases to
detect duplicity.
Fixes: 3fd64fb0e2
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While qemu is still reporting the 'device' field in the tray even the
code was not ready for the possibility of it missing. Fix the condition
for clearing 'devAlias' if qemu doesn't report the 'device' field.
Signed-off-by: Sergey Mironov <mironov@fintech.ru>
Ever since commit 6e9bd600d7 added a new
GitLab job description function handling the integration test suite
process to ci/jobs.sh it should be mentioned in the docs.
This patch splits the 'Run TCK' section in two, giving user the option
to run the integration test suite in their VM environment the same way
as we do in GitLab CI or execute everything manually.
This patch takes the opportunity to also link to the virtiofs kbase
article to give users a different option to get the local libvirt
repositories to be used in testing inside a VM.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It's mentioned in an earlier paragraph that Perl bindings in correct
version are needed, but there's no note about libvirt even though it
should be obvious. So make a clear note on that and while at it, do
mention the possibility to get upstream libvirt RPMs from GitLab CI
artifacts if users don't feel like building everything on their own.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The fact that we need ci/helper script to run the workloads remains
true, but the invocation has changed as of commit
eb41e45630 . We also extracted GitLab job
specs into a standalone ci/jobs.sh script which allows execution of any
container job we run in upstream CI locally, unlike the original
functionality which only allowed builds, tests and shell (although
important to say it could be adjusted with the right meson/ninja args).
lcitool also became mandatory as it enables the container execution
which replaced a Makefile we used to have for this purpose.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
While wording is still correct to this day, we have already added more
features to lcitool and documented it properly in its repo. Make sure
that we refer the users to lcitool's doc material for further details
on how VMs can be installed locally.
Use the opportunity to bump the OS distro target from Fedora 36 -> 38.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
While we may have needed to run TCK through Avocado by explicitly using
the '--tap' option (still possible), we can get a nice output from
Avocado by default leaving the option out which is exactly what we do
inside GitLab CI environment.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This patch mainly fixes an unfinished sentence that was supposed to
describe the LIBVIRT_CI_INTEGRATION_RUNNER_TAG variable, but took the
opportunity to update the description of the other variable too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The documented process should be updated to reflect the new process
once GitLab transitions to it completely and drops the old process
involving registration tokens as hinted by the note.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Comparison "if (ret == -1)" is always false.
This statement was forgotten during switching to g_new0()
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0275b06a55 ("util: command: use g_new0")
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Now that deleting and reverting external snapshots is implemented we can
report that in capabilities so management applications can use that
information and start using external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Original code assumed that the memory state file is only migration
stream but it has additional metadata stored by libvirt. To correctly
load the memory state file we need to reuse code that is used when
restoring domain from saved image.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We need to skip all disks that have snapshot type other than 'external'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When used with internal snapshots there is no memory state file so we
have no data to load and decompression is not needed.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When called from snapshot code we will need to pass snapshot object in
order to make internal snapshots work correctly.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When called by snapshot code we will need to use different reason.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The function will no longer be used only when restoring VM as it will
be used when reverting snapshot as well so move it to qemu_process
and rename it accordingly.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These new helpers separates the code from the logic used to start new
QEMU process with memory state and will make it easier to move
qemuSaveImageStartProcess() into qemu_process.c file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Part of qemuSaveImageStartVM() function will be used when reverting
external snapshots. To avoid duplicating code and logic extract the
shared bits into separate function.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently, nbdkit support will automatically be enabled as long as
the pidfd_open(2) syscall is available. Optionally, libnbd is used
to generate more user-friendly error messages.
In theory this is all good, since use of nbdkit is supposed to be
transparent to the user. In practice, however, there is a problem:
if support for it is enabled at build time and the necessary
runtime components are installed, nbdkit will always be preferred,
with no way for the user to opt out.
This will arguably be fine in the long run, but right now none of
the platforms that we target ships with a SELinux policy that
allows libvirt to launch nbdkit, and the AppArmor policy that we
maintain ourselves hasn't been updated either.
So, in practice, as of today having nbdkit installed on the host
makes network disks completely unusable unless you're willing to
compromise the overall security of the system by disabling
SELinux/AppArmor.
In order to make the transition smoother, provide a convenient
way for users and distro packagers to disable nbdkit support at
compile time until SELinux and AppArmor are ready.
In the process, detection is completely overhauled. libnbd is
made mandatory when nbdkit support is enabled, since availability
across operating systems is comparable and offering users the
option to make error messages worse doesn't make a lot of sense;
we also make sure that an explicit request from the user to
enable/disable nbdkit support is either complied with, or results
in a build failure when that's not possible. Last but not least,
we avoid linking against libnbd when nbdkit support is disabled.
At the RPM level, we disable the feature when building against
anything older than Fedora 40, which still doesn't have the
necessary SELinux bits but will hopefully gain them by the time
it's released. We also allow nbdkit support to be disabled at
build time the same way as other optional features, that is, by
passing "--define '_without_nbdkit 1'" to rpmbuild. Finally, if
nbdkit support has been disabled, installing libvirt will no
longer drag it in as a (weak) dependency.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Wrap the macro body in a new block and move the declaration of 'tmp'
into it, to avoid the need to mix g_autofree with manual freeing.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The function returns how many array items were filled in, but virsh
never checked for anything other than errors. Just to make sure this
does not report invalid data, even though the only possibility would be
reporting 0 free pages, check the returned data so that possible errors
are detected.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
(cherry picked from commit c35ba64d18235bfe35617cb3d6d6cc778f6d166d)
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function is supposed to return the number of items filled into the
array and not zero. Also change the initialization of the "randomness"
to be based on the startCell so that the values are different for each
cell even for separate calls.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 208569b07b6479e0acd05c5a7e1978b0b641e188)
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virProcessKillPainfullyDelay() currently almost always returns 1 or -1,
even though the documentation indicates that it should return 0 if the
process was terminated gracefully. But the computation of the return
code is faulty and the only case where it currently returns 0 is when it
is called with the pid of a process that does not exist.
Since no callers ever even distinguish between the 0 and 1 response
codes, simply get rid of the distinction and return 0 for both cases.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Like the Description, these are intended to be displayed to the
user, so it makes sense to have them towards the top of the file
before all the information that systemd will parse to calculate
dependencies.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Hypervisors are referred to by their user-facing name rather
than the name of their libvirt driver, the monolithic daemon is
explicitly referred to as legacy, and a consistent format is
used throughout.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we only set this for the main sockets, which means
that
$ systemctl stop virtqemud.socket
will make the socket disappear from the filesystem while
$ systemctl stop virtqemud-ro.socket
won't. Get rid of this inconsistency.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This results in all sockets for a service being enabled when a
single one of them is.
The -tcp and -tls sockets are intentionally excluded, because
enabling them should require explicit action on the
administrator's part; moreover, disabling them should not result
in the local sockets being disabled too.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
systemd will automatically infer this dependency based on the
socket's Service=foo.service setting.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We have already declared the mirror relationship, so this one
is now redundant.
Moreover, this version was incomplete: it only ever worked for
the monolithic daemon, but the modular daemons for QEMU and Xen
also want the sockets to be active.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Requires/Wants only tells systemd that the corresponding unit
should be started when the current one is, but that could very
well happen in parallel. For virtlogd/virtlockd, we want the
socket to be already active when the hypervisor driver is
started.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Only the main socket is actually necessary for the service to be
usable.
In the past, we've had security issues that could be exploited via
access to the read-only socket, so a security-minded administrator
might consider disabling all optional sockets. This change makes
such a setup possible.
Note that the services will still try to activate all their
sockets on startup, even if they have been disabled. To make sure
that the optional sockets are never started, they will have to be
masked.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is the strongest relationship that can be declared between
two units, and causes the service to be terminated immediately
if its main socket disappears. This is the behavior we want.
Note that we don't do the same for the read-only/admin sockets,
because those are not as critical for the core functionality of
services as the main socket it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We want to make sure that, at any given time, we have either the
modular daemons or the monolithic one running, never both. In
order to achieve that, make every single modular unit conflict
with the corresponding libvirtd unit.
We set both Conflicts=libvirtd.unit and After=libvirtd.unit: this
tells systemd that, whenever virtfood.unit and libvirtd.unit are
part of the same transaction, the former should win out.
Thanks to this, if both the modular daemons and the monolithic
one have been enabled because of outdated automation or a simple
mistake of the administrator, the request to start libvirtd at
boot will be ignored and the result will be a regular modular
deployment.
If the request to start libvirtd is made when the modular daemons
are already running, we have no way to prevent systemd from
complying with that request; however, thanks to the way the
conflict relationship has been declared, they will be shut down
cleanly before libvirtd is started. From the user's point of
view, the transition from modular to monolithic will be
completely transparent: it's basically the same scenario as a
regular package upgrade, just with an extra twist.
Note that, while switching from modular to monolithic at runtime
happens automatically, going back requires manual intervention,
i.e. starting all the necessary sockets one by one. That's okay:
the goal here is to prevent misconfiguration and force of habit
to accidentally disrupt a working setup, not to encourage the
scenario. In a correctly configured and managed host, it should
never occur.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Up until now the files have been used as template for most
services, but now that those have been converted to common
templates we can drop parametrization and make it clear that
these files are for libvirtd only.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the migration to common templates has been completed,
we no longer need these.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>