Use g_autofree on strings and remove the 'done' label since it's
now unneeded.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add headers with declarations of geteuid/getegid
and virGetUserName/virGetGroupName.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
While moving the code, qemuDomainNamespace also was moved
to `qemu_domainjob`. Hence it is moved back to `qemu_domain`
where it will be more appropriate.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With meson introduction which is using the same CFLAGS for the whole
project some compilation errors were discovered. The wireshark plugin
library is the only one in tools directory that is not using AM_CFLAGS.
With the AM_CFLAGS we get these errors:
../../tools/wireshark/src/packet-libvirt.c: In function 'dissect_libvirt_fds':
../../tools/wireshark/src/packet-libvirt.c:348:31: error: unused parameter 'tvb' [-Werror=unused-parameter]
348 | dissect_libvirt_fds(tvbuff_t *tvb, gint start, gint32 nfds)
| ~~~~~~~~~~^~~
../../tools/wireshark/src/packet-libvirt.c:348:41: error: unused parameter 'start' [-Werror=unused-parameter]
348 | dissect_libvirt_fds(tvbuff_t *tvb, gint start, gint32 nfds)
| ~~~~~^~~~~
../../tools/wireshark/src/packet-libvirt.c:348:55: error: unused parameter 'nfds' [-Werror=unused-parameter]
348 | dissect_libvirt_fds(tvbuff_t *tvb, gint start, gint32 nfds)
| ~~~~~~~^~~~
At top level:
../../tools/wireshark/src/packet-libvirt.c:64:5: error: 'dissect_xdr_bool' defined but not used [-Werror=unused-function]
64 | dissect_xdr_##xtype(tvbuff_t *tvb, proto_tree *tree, XDR *xdrs, int hf) \
| ^~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:88:1: note: in expansion of macro 'XDR_PRIMITIVE_DISSECTOR'
88 | XDR_PRIMITIVE_DISSECTOR(bool, bool_t, boolean)
| ^~~~~~~~~~~~~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:64:5: error: 'dissect_xdr_float' defined but not used [-Werror=unused-function]
64 | dissect_xdr_##xtype(tvbuff_t *tvb, proto_tree *tree, XDR *xdrs, int hf) \
| ^~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:86:1: note: in expansion of macro 'XDR_PRIMITIVE_DISSECTOR'
86 | XDR_PRIMITIVE_DISSECTOR(float, gfloat, float)
| ^~~~~~~~~~~~~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:64:5: error: 'dissect_xdr_short' defined but not used [-Werror=unused-function]
64 | dissect_xdr_##xtype(tvbuff_t *tvb, proto_tree *tree, XDR *xdrs, int hf) \
| ^~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:80:1: note: in expansion of macro 'XDR_PRIMITIVE_DISSECTOR'
80 | XDR_PRIMITIVE_DISSECTOR(short, gint16, int)
| ^~~~~~~~~~~~~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c: In function 'dissect_libvirt_message':
../../tools/wireshark/src/packet-libvirt.c:423:34: error: null pointer dereference [-Werror=null-dereference]
423 | vir_xdr_dissector_t xd = find_payload_dissector(proc, type, get_program_data(prog, VIR_PROGRAM_DISSECTORS),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
424 | *(gsize *)get_program_data(prog, VIR_PROGRAM_DISSECTORS_LEN));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current code to check XDR support was obsolete and way to
complicated.
On linux we can use pkg-config to check for libtirpc and have
the CFLAGS and LIBS configured by it as well.
On MinGW there is portablexdr library which installs header files
directly into system include directory.
On FreeBSD and macOS XDR functions are part of libc so there is
no library needed, we just need to call AM_CONDITIONAL to silence
configure which otherwise complains about missing WITH_XDR.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the listed functions are available in libselinux version 2.2.
Our supported OSes start with version 2.5 so there is no need to check
it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Just like in the previous commit, the stdin_path argument of
virSecurityManagerSetAllLabel() is renamed to incomingPath.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The argument (if not NULL) points to the file the domain is
restoring from. On QEMU command line this used to be '-incoming
$path', but we've switched to passing FD ages ago and thus this
argument is used only in AppArmor (which loads the profile on
domain start). Anyway, the argument does not refer to stdin,
rename it to 'incomingPath' then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The only consumer was removed in the previous commit.
This reverts commit f03a38bd1d.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Currently, when restoring from a domain the path that the domain
restores from is labelled under qemuSecuritySetAllLabel() (and after
v6.3.0-rc1~108 even outside transactions). While this grants QEMU
the access, it has a flaw, because once the domain is restored, up
and running then qemuSecurityDomainRestorePathLabel() is called,
which is not real counterpart. In case of DAC driver the
SetAllLabel() does nothing with the restore path but
RestorePathLabel() does - it chown()-s the file back and since there
is no original label remembered, the file is chown()-ed to
root:root. While the apparent solution is to have DAC driver set the
label (and thus remember the original one) in SetAllLabel(), we can
do better.
Turns out, we are opening the file ourselves (because it may live on
a root squashed NFS) and then are just passing the FD to QEMU. But
this means, that we don't have to chown() the file at all, we need
to set SELinux labels and/or add the path to AppArmor profile.
And since we want to restore labels right after QEMU is done loading
the migration stream (we don't want to wait until
qemuSecurityRestoreAllLabel()), the best way to approach this is to
have separate APIs for labelling and restoring label on the restore
file.
I will investigate whether AppArmor can use the SavedStateLabel()
API instead of passing the restore path to SetAllLabel().
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1851016
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
These APIs are are basically
virSecuritySELinuxDomainSetPathLabelRO() and
virSecuritySELinuxDomainRestorePathLabel().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
These APIs don't use namespaces because the
virSecurityManagerSetSavedStateLabel() runs
when the namespace doesn't exist yet and thus
the virSecurityManagerRestoreSavedStateLabel()
has to run without namespace too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
These APIs were removed/renamed in v6.5.0-rc1~142 and v6.5.0-rc1~141
because they deemed unused. And if it wasn't for the RFE [1] things
would stay that way.
The RFE asks for us to not change DAC ownership on the file a domain is
restoring from. We have been doing that for ages (if not forever),
nevertheless it's annoying because if the restore file is on an NFS
remembering owner won't help - NFS doesn't support XATTRs yet. But more
importantly, there is no need for us to chown() the file because when
restoring the domain the file is opened and the FD is then passed to
QEMU. Therefore, we really need only to set SELinux and AppArmor.
This reverts bd22eec903.
This partially reverts 4ccbd207f2.
The difference to the original code is that secdrivers are now
not required to provide dummy implementation to avoid
virReportUnsupportedError(). The callback is run if it exists, if
it doesn't zero is returned without any error.
1: https://bugzilla.redhat.com/show_bug.cgi?id=1851016
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When locking files for metadata change, we open() them for R/W
access. The write access is needed because we want to acquire
exclusive (write) lock (to mutually exclude with other daemons
trying to modify XATTRs on the same file). Anyway, the open()
might fail if the file lives on a RO filesystem. Well, if that's
the case, ignore the error and continue with the next file on the
list. We won't change any seclabel on the file anyway - there is
nothing to remember then.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the light of recent commit of 9d83281382 fix the comment that
says directories can't be locked. Well, in general they can, but
not in our case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit <5b816e16968ba02def56f067774ecd9a8c8d44d7> removed hard-coded
sysconfdir path from *.conf files but missed virtproxyd.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit <f650e86703847af544762d02f79c70131ff7fbab> added check for
openpty function from util library using AC_CHECK_LIB(). However, that
macro doesn't define OPENPTY_LIBS, it only defines WITH_LIBUTIL and
prepends -lutil into LIBS for the whole project.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It was introduced by commit <c606671aaad10a9bc87f226bc473a091e00a9629>
as a gnulib ldexp module and later removed by commit
<09fe607b4de8eb883c966e90aaf5563299a22738>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Fixes inconsistency with macro names for external programs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit <0985a9597bb0348d46c0d18dc548a676bf0ad8e2> added unused variable
so remove it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit <894556ca813ad3c4ebb01083b7971d73b4f53c8b> moved function
virSecretGetSecretString out of secret directory but forgot to update
CFLAGS in places where the include is no longer needed.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit <fd3b8fe7ad491c77c0b3f57110adaf64f743855e> removed objectlocking
test but forgot to remove all of the usages of LOCK_CHECKING_CFLAGS.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Function sanlock_write_lockspace() was introduced in 2.7 version which
is available in all supported OSes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Function sanlock_killpath() was introduced in 2.4 version and had
modified one of the arguments from `char *` into `const char *` in
version 2.7. All of this is available in all supported OSes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SANLK_INQ_WAIT was introduced in sanlock 2.4 which is available in all
supported OSes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This check was introduced by commit
<96a02703daad4dc6663165adbc0feade9900cebd> to guard calling
sanlock_inq_lockspace() function but it used SANLK_INQ_WAIT as a
parameter which was introduced later. This was eventually fixed by
commit <238dba0f9c925359cb3b8beddd8c8ae739cb4e06>.
We can safely replace check for sanlock_inq_lockspace as that function
was introduced in sanlock-1.9. The oldest used version, sanlock-2.2,
is by Ubuntu 16.04.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was introduced together with clock-time gnulib module by commit
<d74e5a4dfc434d3a1d01856d013a7f50d910fa95> and removed from libvirt
by commit <86d223a762990c9d529065a2d3b30b6a00ea63dd>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Set FLAT_NAMESPACE_FLAGS to -Wl,-flat_namespace in configure only for
macOS and use it unconditionally in Makefiles.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There is no need to have DRIVER_MODULES_LIBS as it's used only for
libvirt.so. The other places are using DLOPEN_LIBS directly and dlopen
is required if building with libvirtd.
It's mandatory since <5aec02dc37623bf739d1edd8f2be3e4ad9f94ff5>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virFileIsAccessible does not return true on accessible
directories. Check whether it set EISDIR and only
then assume the directory is inaccessible.
Return 0 (not found) instead of 1 (found),
since the bridge driver taints the network based on
this return value, not whether the hook actually ran.
Remove the bogus check from virHookCall, since it already
checks the virHooksFound bitmap that was filled before
by virHookCheck.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 7fa7f7eeb6
Closes: https://gitlab.com/libvirt/libvirt/-/issues/47
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
- Add a check for asm/hwcap.h header presence,
- Add a check for getauxval() function that is used
on Linux, and for elf_aux_info() which is a FreeBSD
equivalent.
This is based on a patch submitted by Mikael Urankar in
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=247722.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When preparing for the removal of GNULIB commit 18dca21a32 removed the
unneeded O_DIRECTORY, but unfortunately started opening the directory for
writing which fails every time for a directory. There is also no need for that
as flock() works on O_RDONLY file descriptor as well, even for LOCK_EX.
https://bugzilla.redhat.com/1852741
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
All modified functions are similar, in all cases "cleanup" label is removed,
along with all the "goto" calls.
Signed-off-by: Nicolas Brignone <nmbrignone@gmail.com>
Reviewed-by: Laine Stump <laine@redhat.com>
libxlMakeNic was calling g_strdup(virBufferCurrentContent(&buf)) to
make a copy of the buffer contents, and then later freeing the buffer
without ever using it again. Instead of this extra strdup, just
transfer ownership of the virBuffer's string with
virBufferContentAndReset(), and be done with it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are several calls to virBufferFreeAndReset() when functions
encounter an error, but the caller never uses the virBuffer once an
error has been encountered (all callers detect error by looking at the
function return value, not the contents of the virBuffer being
operated on), and now that all virBuffers are auto-freed there is no
reason for the lower level functions like these to spend time freeing
a buffer that is guaranteed to be freed momentarily anyway.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every other caller of this function checks for an error return and
ends their formatting early if there is an error. This function
happily continues on its way.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The latter function is guaranteed to always clear out the virBuffer
anyway, so this is redundant and could add to extra cargo-cult code if
used as an example.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In most cases this eliminates one or more calls to
virBufferClearAndReset(), but even when it doesn't it's better because:
1) it makes the code more consistent, making it more likely that new
contributors who are "learning by example" will to the right thing.
2) it protects against future modifications that might have otherwise
needed to add a virBufferClearAndReset()
3) Currently some functions don't call virBufferClearAndReset() only
because they're relying on some subordinate function to call it for
them (e.g. bhyveConnectGetSysinfo() in this patch relies on
virSysinfoFormat() to clear out the buffer when there is an
error). I think this is sloppy behavior, and that the toplevel
function that defines and initializes the buffer should be the
function clearing it at the end.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The output of vcpupin and emulatorpin for a domain with vcpu
placement='static' is based on a default bitmap that contains
all possible CPUs in the host, regardless of the CPUs being offline
or not. E.g. for a Linux host with this CPU setup (from lscpu):
On-line CPU(s) list: 0,8,16,24,32,40,(...),184
Off-line CPU(s) list: 1-7,9-15,17-23,25-31,(...),185-191
And a domain with this configuration:
<vcpu placement='static'>1</vcpu>
'virsh vcpupin' will return the following:
$ sudo ./run tools/virsh vcpupin vcpupin_test
VCPU CPU Affinity
----------------------
0 0-191
This is benign by its own, but can make the user believe that all
CPUs from the 0-191 range are eligible for pinning. Which can lead
to situations like this:
$ sudo ./run tools/virsh vcpupin vcpupin_test 0 1
error: Invalid value '1' for 'cpuset.cpus': Invalid argument
This is exarcebated by the fact that 'virsh vcpuinfo' considers only
available host CPUs in the 'CPU Affinity' field:
$ sudo ./run tools/virsh vcpuinfo vcpupin_test
(...)
CPU Affinity: y-------y-------y-------(...)
This patch changes the default bitmap of vcpupin and emulatorpin, in
the case of domains with static vcpu placement, to all available CPUs
instead of all possible CPUs. Aside from making it consistent with
the behavior of 'vcpuinfo', users will now have one less incentive to
try to pin a vcpu in an offline CPU.
https://bugzilla.redhat.com/show_bug.cgi?id=1434276
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have a function that calls virHostCPUGetOnlineBitmap()
but, instead of returning NULL if the host does not have CPU
offlining capabilities, fall back to a bitmap containing all
present CPUs.
Next patch will use this helper in two other places.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function reads the string in sysfspath/cpu/present and
parses it manually to retrieve the number of present CPUs.
virHostCPUGetPresentBitmap() reads and parses the same file,
using a more robust parser via virBitmapParseUnlimited(),
but returns a bitmap. Let's drop all the manual parsing done
here and simply return the size of the resulting bitmap
from virHostCPUGetPresentBitmap().
Given that no more parsing is being done manually in the function,
rename it to virHostCPUCountLinux().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the ESX virtual hardware version 4.0, virtual machines support up
to 10 virtual NICs instead of 4 previously. This changes the limit
accordingly based on the provided `virtualHW.version`.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the name is 'vcpus', we will get 'vcpussched' instead of 'vcpusched'
in the error message as following:
... 19155 : vcpussched attributes 'vcpus' must not overlap
So we use 'vcpu' to replace 'vcpus'.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A few commits ago, in aeecbc87b7, I've implemented command line
generation for ACPI HMAT. For this, we need to know if at least
one guest NUMA node has vCPUs. This is tracked in
@masterInitiator variable, which is initialized to -1, then we
iterate through guest NUMA nodes and break the loop if we find a
node with a vCPU. After the loop, if masterInitiator is still
negative then no NUMA node has a vCPU and we error out. But this
exact check was missing comparison for negativeness.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This capability tracks whether QEMU is capable of defining HMAT
ACPI table for the guest.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These APIs will be used by QEMU driver when building the command
line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are several restrictions, for instance @initiator and
@target have to refer to existing NUMA nodes (daa), @cache has to
refer to a defined cache level and so on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
To cite ACPI specification:
Heterogeneous Memory Attribute Table describes the memory
attributes, such as memory side cache attributes and bandwidth
and latency details, related to the System Physical Address
(SPA) Memory Ranges. The software is expected to use this
information as hint for optimization.
According to our upstream discussion [1] this is exposed under
<numa/> as <cache/> under NUMA <cell/> and <latency> or
<bandwidth/> under numa/latencies.
1: https://www.redhat.com/archives/libvir-list/2020-January/msg00422.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU allows creating NUMA nodes that have memory only.
These are somehow important for HMAT.
With check done in qemuValidateDomainDef() for QEMU 2.7 or newer
(checked via QEMU_CAPS_NUMA), we can be sure that the vCPUs are
fully assigned to NUMA nodes in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is only one caller of virDomainNumaSetNodeCpumask() which
checks for the return value but because the function will return
NULL iff the @cpumask was NULL in the first place. But in that
place @cpumask can't be NULL because it was just allocated by
virBitmapParse().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The machine can not be NULL at this point -
qemuDomainDefPostParse() makes sure it isn't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The function doesn't just build the argument for -numa. Since the
-numa can be repeated multiple times, it also puts -numa onto the
cmd line. Also, the rest of the functions has 'Command' infix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are two functions virDomainNumaDefCPUFormatXML() and
virDomainNumaDefCPUParseXML() which format and parse domain's
<numa/>. There is nothing CPU specific about them. Drop the
infix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is nothing domain specific about the function, thus it
should not have virDomain prefix. Also, the fact that it is a
static function makes it impossible to use from other files.
Move the function to virxml.c and drop the 'Domain' infix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 82576d8f35 used a string "on" to enable the 'pmem' property.
This is okay for the command line visitor, but the property is declared
as boolean in qemu and thus it will not work when using QMP.
Modify the type to boolean. This changes the command line, but
fortunately the command line visitor in qemu parses both 'yes' and 'on'
as true for the property.
https://bugzilla.redhat.com/show_bug.cgi?id=1854684
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previous commit removed the last usage of the function. Drop
virQEMUCapsCompareArch as well since virQEMUCapsCacheLookupByArch was
its only caller.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, SEV is present only on AMD, so we can safely assume x86.
Secondly, the problem with looking up capabilities in the cache by arch
is that it's using virHashSearch with a callback to find the right
capabilities and get the binary name from it as well, but since the
cache is empty, it will return NULL and we won't get the corresponding
binary name out of the lookup either. Then, during the cache validation
we try to create a new cache entry for the emulator, but since we don't
have the binary name, nothing gets created.
Therefore, virQEMUCapsCacheLookupDefault is used to fix this issue,
because it doesn't rely on the capabilities cache to construct the
emulator binary name.
https://bugzilla.redhat.com/show_bug.cgi?id=1852311
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The semantics of the backup operation don't strictly require that all
disks being backed up are part of the same incremental part (when a disk
was checkpointed/backed up separately or in a different VM), or even
they may not have a previous checkpoint at all (e.g. when the disk
was freshly hotplugged to the vm).
In such cases we can still create a common checkpoint for all of them
and backup differences according to configuration.
This patch adds a per-disk configuration of the checkpoint to do the
incremental backup from via the 'incremental' attribute and allows
perform full backups via the 'backupmode' attribute.
Note that no changes to the qemu driver are necessary to take advantage
of this as we already obey the per-disk 'incremental' field.
https://bugzilla.redhat.com/show_bug.cgi?id=1829829
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use the configured TLS env to setup encryption of the TLS transport.
https://bugzilla.redhat.com/show_bug.cgi?id=1822631
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow enabling TLS for the NBD server used to do pull-mode backups. Note
that documentation already mentions 'tls', so this just implements the
schema and XML bits.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
TLS is required to transport backed-up data securely when using
pull-mode backups.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add fields for storing the aliases necessary to clean up the TLS env for
a backup job after it finishes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Data is valid only when queried as guest writes may increase the backup
size.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce code which merges the appropriate bitmaps and queries the
final size of the backup, so that we can print the XML with size
information.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Avoid printing '0' size in case when we weren't able to determine the
backup size by adding a flag whether the size is valid and interlock
printing of the field according to the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Merge the bitmaps when finalizing a block pull job so that backups work
properly afterwards.
https://bugzilla.redhat.com/show_bug.cgi?id=1799010
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Users may want to use this to create a full backup or even incremental
if the checkpoints are pre-existing. We still will not allow to create a
checkpoint on a read-only disk as that makes no sense.
https://bugzilla.redhat.com/show_bug.cgi?id=1840053
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Setup the TLS secret when preparing a virStorageSource for use.
https://bugzilla.redhat.com/show_bug.cgi?id=1602328
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Until now libvirt didn't allow using encrypted TLS key for disk clients.
Add fields for configuring the secret and propagate defaults.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add infrastructure for hot- and cold-plug of the secret object holding
decryption key for the TLS key.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Store the required data in the private data of a storage source and
ensure that the 'alias' of the secret is formatted in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The '*_tls_x509_verify' options are relevant only when we are going to
expose a server socket as client sockets always enable verification.
Split up the macro to separate the common bits from the server bits so
that when we'll later extend support of 'nbd' and 'vxhs' disks which are
client only we can reuse the existing macros.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Move the extraction of the config value so that it makes more sense
after upcoming refactors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There's no such parameter. Reword the sentence to account for enabling
TLS-encrypted migration using API flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a helper which will always return the storage source private data
even if it was not allocated before.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The strings allocated in virGetHostnameImpl() are all allocated via
g_strdup(), which will exit on OOM anyway, so the call to
virReportOOMError() is redundant, and removing it allows slight
modification to the code, in particular the cleanup label can be
eliminated.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The error: label in this function just does "return -1", so replace
all the "goto error" in the function with "return -1".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
hostsfilestr was not being freed. This will be turned into g_autofree
in an upcoming patch converting a lot more of the same file to using
g_auto*, but I wanted to make a separate patch for this first so the
other patch is simpler to review (and to make backporting easier).
The leak was introduced in commit 97a0aa2467
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
AUTOPTR_CLEANUP_FUNC is set to xmlBufferFree() in util/virxml.h (This
is actually new - added accidentally (but fortunately harmlessly!) in
commit 257aba2daf. I had added it along with the hunks in this patch,
then decided to remove it and submit separately, but missed taking out
the hunk in virxml.h)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Although libvirt itself uses g_malloc0() and friends, which exit when
there isn't enouogh memory, libxml2 uses standard malloc(), which just
returns NULL on OOM - this means we must check for NULL on return from
any libxml2 functions that allocate memory.
xmlBufferCreate(), for example, might return NULL, and we don't always
check for it. This patch adds checks where it isn't already done.
(NB: Although libxml2 has a provision for changing behavior on OOM (by
calling xmlMemSetup() to change what functions are used to
allocating/freeing memory), we can't use that, since parts of libvirt
code end up in libvirt.so, which is linked and called directly by
applications that may themselves use libxml2 (and may have already set
their own alternate malloc()), e.g. drivers like esx which live totally
in the library rather than a separate process.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When introducing vcpu.<num>.wait (v1.3.2-rc1~301) and
vcpu.<num>.halted (v2.4.0-rc1~36) the documentation was
not written.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since feb83c1e71 libvirtd will abort on
startup if run as non-root
2020-07-01 16:30:30.738+0000: 1647444: error : virDirOpenInternal:2869 : cannot open directory '/etc/libvirt/hooks/daemon.d': Permission denied
The root cause flaw is that non-root libvirtd is using /etc/libvirt for
its hooks. Traditionally that has been harmless though since we checked
whether we could access the hook file and degraded gracefully. We need
the same access check for iterating over the hook directory.
Long term we should make it possible to have an unprivileged hook dir
under $HOME.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In 076591009a a validation code was added to
virDomainDeviceInfoFormat() which reports an error if zPCI
address entered in was incomplete. But, there are two problems
with this approach.
The first problem is the placement of the code - it doesn't
belong into XML formatter rather than XML validator.
The second one is that at the point of formatting XML the post
parse callback has run and thus filled in required info.
Therefore this check can never do something useful and instead of
moving it into validator, it's removed completely.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
To make the code future proof, the rest of the
qemuValidateDomainDeviceDefAddress() has to be executed (even
though there is nothing there yet) instead of returning directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit 076591009a ("conf: fix zPCI address auto-generation on
s390") is doing a check for virZPCIDeviceAddressIsIncomplete()
prior to checking if the device has a ZPCI address at all. This
results in errors like these when starting libvirt:
error : virDomainDeviceInfoFormat:7527 : internal error:
Missing uid or fid attribute of zPCI address
Fix it by moving virZPCIDeviceAddressIsIncomplete() after the
check done by virZPCIDeviceAddressIsPresent().
Fixes: 076591009a
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The ZPCI device validation is specific to qemu. So, let us move the
ZPCI uid validation out of domain xml parsing into qemu domain device
validation.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Let us fix the issues with zPCI address validation and auto-generation
on s390.
Currently, there are two issues with handling the ZPCI address
extension. Firstly, when the uid is to be auto-generated with a
specified fid, .i.e.:
...
<address type='pci'>
<zpci fid='0x0000001f'/>
</address>
...
we expect uid='0x0001' (or the next available uid for the domain).
However, we get a parsing error:
$ virsh define zpci.xml
error: XML error: Invalid PCI address uid='0x0000', must be > 0x0000
and <= 0xffff
Secondly, when the uid is specified explicitly with the invalid
numerical value '0x0000', we actually expect the parsing error above.
However, the domain is being defined and the uid value is silently
changed to a valid value.
The first issue is a bug and the second one is undesired behaviour, and
both issues are related to how we (in-band) signal invalid values for
uid and fid. So let's fix the XML parsing to do validation based on what
is actually specified in the XML.
The first issue is also related to the current code behaviour, which
is, if either uid or fid is specified by the user, it is incorrectly
assumed that both uid and fid are specified. This bug is fixed by
identifying when the user specified ZPCI address is incomplete and
auto-generating the missing ZPCI address.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Refer to the notion of mount propagation instead which describes
the actual behaviour more clearly.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The two sides of a PTY can be referred to as primary and secondary
TTYs.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When querying QEMU we have to iterate over two nested sets
of CPUs. The terms "main vcpu" and "sub vcpu" are a good
representation.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The two sides of a PTY can be referred to as primary and secondary
TTYs.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The term "ignored" is a better choice for the filtering performed
on devices from udev.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This new naming matches the terminology used in the error
messages that the callers report.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When listing CPU models, we need to filter the data based on sets
of permitted and forbidden CPU models.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The term "access control list" better describes the concept involved.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The term "access control list" better describes the concept involved.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Although a ramfb video device is not a PCI device, we don't currently
report an error for ramfb device definitions containing a PCI address.
However, a guest configured with such a device will fail to start:
# virsh start test1
error: Failed to start domain test1
error: internal error: qemu unexpectedly closed the monitor: 2020-06-16T05:23:02.759221Z qemu-kvm: -device ramfb,id=video0,bus=pcie.0,addr=0x1: Device 'ramfb' can't go on PCIE bus
A better approach is to reject any device definitions that contain PCI
addresses. While this is a change in behavior, any existing
configurations were non-functional.
https://bugzilla.redhat.com/show_bug.cgi?id=1847259
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
A few commits back (in v6.4.0-131-gbdb8f2e418) the post parse
function for domain interface was changed so that it doesn't fill
in model for hostdev types of interfaces (including network type
interfaces which would end up hostdevs).
While the idea is sound, the execution can be a bit better:
virDomainNetResolveActualType() which is used to determine
runtime type of given interface is heavy gun - it connects to
network driver, fetches network XML, parses it. This all is
followed by check whether the interface doesn't already have
model set (from domain XML).
If we switch the order of these two checks then the short circuit
evaluation will ensure the expensive check is done only if really
needed.
This commit in fact fixes qemuxml2xmltest which due to lacking
fake network driver tries to connect to network:///session and
start the virtnetworkd. Fortunately, because of
v6.3.0-25-gf28fbb05d3 it fails to do so and
virDomainNetResolveActualType() returns -1. The only reason we
don't see the test failing is because our input XMLs have model
and thus we are saved by the latter (now former) check.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Until recently, an <interface type='network'> would automatically be
assigned model "rtl8139", which in turn would lead to the device being
assigned a PCI address on a conventional PCI controller (i.e. a
pcie-to-pci-bridge). If the network was a typical Linux host
bridge-based network that used an emulated device, this would be
appropriate, since the guest actually would get an emulated rtl8139
NIC, and that device is a conventional PCI device.
However, if the network being used was a pool of hostdev devices, the
guest would get an actual PCIe network device assigned from the host
via VFIO; while the interface model in that case is irrelevant for the
QEMU commandline to assign the device, the PCI address would have
already been assigned prior to runtime, so the address assignment
would be done based on the model='rtl8139' - a conventional PCI
device. VFIO assignment of a PCIe device to a conventional PCI slot
works, but we would rather have these devices in a PCIe slot.
Since commit bdb8f2e418, if <interface type='network'> points to a
etwork that is a pool of hostdev devices, the interface model will be
_unset_ by default. This patch uses that information when deciding
what type of slot to assign to the device: since all hostdev network
interfaces are SR-IOV VFs, and *all* SR-IOV network cards are PCIe, it
is safe to assume that the VFs are PCIe and we should assign then to a
PCIe slot in the guest.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
All the domain job related APIs were present in `qemu_domain.c`
along with the other domain APIs. In this patch, we move all the
qemu domain job APIs into a separate file.
Also, in this process, `qemuDomainTrackJob()`,
`qemuDomainFreeJob()`, `qemuDomainInitJob()` and
`qemuDomainObjSaveStatus()` were converted to a non-static
funciton and exposed using `qemu_domain.h`.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In functions `qemuDomainObjInitJob`, `qemuDomainObjResetJob`,
`qemuDomainObjResetAgentJob`, `qemuDomainObjResetAsyncJob`,
`qemuDomainObjFreeJob`, `qemuDomainJobAllowed`,
`qemuDomainNestedJobAllowed` we avoid sending the complete
qemuDomainObjPrivatePtr as parameter and instead just send
qemuDomainJobObjPtr.
This is done in a effort to separating the qemu-job APIs into
a spearate file.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some functions or code paths that may fail don't report error
(e.g. when acquiring PID file fails) leading to a silent quit
of the leaseshelper. This makes it super hard for us and users
to debug what is happening. Fortunately, dnsmasq captures both
stdout and stderr so we can write an error message there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
On a DHCP transaction, dnsmasq runs our leases helper which
updates corresponding JSON files. While one dnsmasq won't run the
leaseshelper in parallel, two dnsmasqs (from two distinct
networks) might. To avoid corrupting JSON file, the leaseshelper
acquires PID file first. Well, the way it's acquiring it is not
ideal - it calls virPidFileAcquirePath(wait = false); which
means, that either it acquires the PID file instantly or returns
an error and does not touch the JSON at all. This in turn means
that there might be a leases record missing. With wait = true,
this won't happen.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1840307
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The "virsh domcapabilities --arch ppc64" command will fail with no
error message set if qemu-system-ppc64 is not currently installed.
This is because virQEMUCapsCacheLookup() does not report any error
message if not capabilities can be obtained from the cache. Almost
all methods calling this expected an error to be set on failure.
Once that's fixed though, we see a further bug which is that
virQEMUCapsCacheLookupDefault() is passing a NULL binary path to
virQEMUCapsCacheLookup(), so we need to catch that too.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It's possible to use ramfb as the boot display of an assigned vgpu
device. This was introduced in 4b95738c, but unfortunately the attribute
was not formatted into the xml output for such a device. This patch
fixes that oversight and adds a xml2xml test to verify proper behavior.
https://bugzilla.redhat.com/show_bug.cgi?id=1847791
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The XML format used for QEMU capabilities is not required to be
stable across releases, as we invalidate the cache whenever the
libvirt binary changes.
We none the less always try to parse te entire XML file before
we do any validity checks. Thus if we change the format of any
part of the data, or change permitted values for enums, then
libvirtd logs will be spammed with errors.
These are not in fact errors, but an expected scenario.
This change makes the loading code validate the cache timestamp
against the libvirtd timestamp immediately. If they don't match
then we stop loading the rest of the XML file.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is easier for management software (and subsequently
distributions) to install hook script under
/etc/libvirt/hooks/$driver.d/ and have libvirt execute them in
alphabetical order. To maintain backwards compatibility,
/etc/libvirt/hooks/$driver hook script is executed the first
followed by scripts from the $driver.d directory.
The stdio is chained between the scripts. The output of the first
script is input of the second and so on.
Signed-off-by: Dmitry Nesterenko <dmitry.nesterenko@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This refactor is needed to support support hooks placed in
several files.
Signed-off-by: Dmitry Nesterenko <dmitry.nesterenko@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch wraps it up all the wiring done in previous patches,
enabling a PPC64 guest to launch a guest using a TPM Proxy
device.
Note that device validation is already being done in qemu_validate.c,
qemuValidateDomainDeviceDefTPM(), on domain define time. We don't
need to verify QEMU capabilities for this device again inside
qemu_command.c.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previous patch handled the conversion of def->tpm to the
array def->tpms and the XML parsing logic. This patch handles
the validations needed to ensure the intended behavior.
The existing qemuValidateDomainDeviceDefTPM() function was updated
to guarantee that the VIR_DOMAIN_TPM_MODEL_SPAPR_PROXY model is
exclusive to PPC64 guests and to the VIR_DOMAIN_TPM_TYPE_PASSTHROUGH
backend.
A new function called qemuDomainDefTPMsPostParse() was added to guarantee
that the following combinations in the same domain are valid:
- a single TPM device
- a single TPM Proxy device
- a single TPM + single TPM Proxy devices
And these combinations in the same domain are NOT valid:
- 2 or more TPM devices
- 2 or more TPM Proxy devices
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A TPM Proxy device can coexist with a regular TPM, but the
current domain definition supports only a single TPM device
in the 'tpm' pointer. This patch replaces this existing pointer
in the domain definition to an array of TPM devices.
All files that references the old pointer were adapted to
handle the new array instead. virDomainDefParseXML() TPM related
code was adapted to handle the parsing of an extra TPM device.
TPM validations after this new scenario will be updated in
the next patch.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This trivial rework is aimed to reduce the amount of line changes
made by the next patch, when 'def->tpm' will become a 'def->tpms'
array.
Instead of using a 'switch' where only the VIR_DOMAIN_TPM_TYPE_EMULATOR
label does something, use an 'if' clause instead.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
qemuExtDevicesInitPaths() does not need 'ret'.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Expose the TPM Proxy support for PPC64 guests by creating a new
cap called QEMU_CAPS_DEVICE_SPAPR_TPM_PROXY.
This device is part of the machinery the guest need to orchestrate
with the PPC64 Ultravisor the transition to the Secure VM (SVM)
mode. Inside QEMU, this device will be used with the H_TPM_COMM
hypercall to connect with the TPM Resource Manager, enabling
the guest to open and close TPM sessions with the host TPM.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use g_autoptr() in qemuCaps to get rid of a virObjectUnref call,
a 'cleanup' label and the 'ret' pointer.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When building command line for IOMMU or machine, there are two
comments which mention function that validate IOMMU. But they
both refer to old name which was changed in v6.3.0-rc1~246.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Format the address width attribute. Depending on the version of
QEMU it is named 'aw-bits' or 'x-aw-bits'.
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a new aw_bits attribute to the iommu device to control
the address width of the intel-iommu
Signed-off-by Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Correct the log name for qemu_security.c to qemu.qemu_security
instead of qemu.qemu_process.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The bitmap name used for the incremental backup would be leaked
otherwise.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally the function was cleaning up a failed job only but now
there's other stuff that needs to be cleared too.
Make only steps which clean up after a failed job depend on the
'started' field and execute the rest of the code always.
This fixes a leak of the backup job tracking object and the blockdev-add
helper data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code would repeatedly mark the first disk's blockjob as started
rather than accessing all the blockjobs. Fix the dereferencing operator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Two functions called in sequence both initialized the virStorageSource
backing 'store' leading to a memleak.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cleanup path expects that 'def' is assigned to 'priv->backup', but
that's not the case for early failures. Add a check to stop overwriting
of 'def' so that it can be freed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using virKModConfig would not simplify any existing code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All callers except for the test suite pass the same value
for the second arg, so it can be removed, simplifying the
code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reuse qemuBlockGetBitmapMergeActions which allows the removal of the
ad-hoc implementation of bitmap merging for block copy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
New semantics of the bitmap handling don't need this. Remove the field
and all uses of it including the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reuse qemuBlockGetBitmapMergeActions which allows removing the ad-hoc
implementation of bitmap merging for block commit. The new approach is
way simpler and more robust and also allows us to get rid of the
disabling of bitmaps done prior to the start as we actually do want to
update the bitmaps in the base.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reuse qemuBlockGetBitmapMergeActions which allows removal of the ad-hoc
implementation of bitmap merging for backup. The new approach is simpler
and also more robust in case some of the bitmaps break as they remove
the dependency on the whole chain of bitmaps working.
The new approach also allows backups if a snapshot is created outside of
libvirt.
Additionally the code is greatly simplified.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a function which allows merging bitmaps according to the new
semantics and will allow replacing all the specific ad-hoc functions
currently in use for 'backup', 'block commit', 'block copy' and will
also be usable in the future for 'block pull' and non-shared storage
migration.
The semantics are a bit quirky for the 'backup' case but these quirks
are documented and will prevent us from having two slightly different
algorithms.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that we've switched to the simple handling, the first thing that can
be massively simplified is checkpoint deletion. We now need to only go
through the backing chain and find the appropriately named bitmaps and
delete them, no complex lookups or merging.
Note that compared to other functions this deletes the bitmap in all
layers compared to others where we expect only exactly 1 bitmap of a
name in the backing chain to prevent potential problems.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reject duplicates and other problematic bitmaps according to the new
semantics of bitmap use in libvirt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Chaining bitmaps for checkpoints (disabling the active one and creating
a new) severely overcomplicated all operations in regards to bitmaps.
Specifically it requires us re-matching the on-disk state to the
internal metadata and in case of merging during block jobs it makes it
almost impossible to cover all corner cases.
Since the checkpoints and incremental backups were not yet enabled,
let's change the design to keep one bitmap per checkpoint. In case of
layered snapshots this will be filled in by using dirty-bitmap-populate.
Finally the main reason for this unnecessary complexity was the fear
that qemu's performance could degrade. In the end I think that
addressing the performance issue will be better done in qemu (e.g by
keeping an internal bitmap updated with changes and merging it
periodically back to the real bitmaps. QEMU writes out changes to disk
at shutdown so consistency is not a problem).
Removing the relationships between bitmaps frees us from complex
handling and also makes all the surrounding code more robust as one
broken bitmap doesn't necessarily invalidate whole chains of backups.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Fetch the checkpoint list for every disk specifically based on the new
per-disk 'incremental' field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In preparation to allow heterogenous backups store the 'incremental'
field per-disk and fill it by default from the per-backup field.
Having this will be important once we'll want to allow incremental
backup working while hotplugging a new disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a disk is not captured by one of the intermediate checkpoints the
code would fail, but we can easily calculate the bitmaps to merge
correctly by skipping over checkpoints which don't describe the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The algorithm is getting quite complex. Split out the lookup of range of
backing chain storage sources and bitmaps contained in them which
correspond to one checkpoint.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The CPUID data in *-{disabled,enabled}.xml convert feature names from
the corresponding *.json file into raw CPUID and MSR data and thus some
of them may need to be updated when new features are added into the CPU
map.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Rather than using the AM_LDFLAGS_MOD_NOUNDEF options with the noinstall
library that will come out of libtool from
libvirt_driver_nodedev_impl_la, use it with the installed version
libvirt_driver_nodedev_la.
Broken-by-commit: c44bffb9
Fixes: https://ci.centos.org/job/libvirt-rpm/systems=libvirt-fedora-32/1155/
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add the ability to destroy mdev node devices via the mdevctl utility.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to test the nodedev driver, we need to link against a
non-loadable module. Similar to other loadable modules already in the
repository, create an _impl library that can be linked against the unit
tests and then create a loadable module from that.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With recent additions to the node device xml schema, an xml schema can
now describe a mdev device sufficiently for libvirt to create and start
the device using the mdevctl utility.
Note that some of the the configuration for a mediated device must be
passed to mdevctl as a JSON-formatted file. In order to avoid creating
and cleaning up temporary files, the JSON is instead fed to stdin and we
pass the filename /dev/stdin to mdevctl. While this may not be portable,
neither are mediated devices, so I don't believe it should cause any
problems.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to allow libvirt to create and start new mediated devices, we
need to be able to verify that the device has been started. In order to
do this, we'll need to save the UUID of newly-discovered devices within
the virNodeDevCapMdev structure. This allows us to search the device
list by UUID and verify whether the expected device has been started.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In preparation for creating mediated devices in libvirt, we will need to
wait for new mediated devices to be created as well. Refactor
nodeDeviceFindNewDevice() so that we can re-use the main logic from this
function to wait for different device types by passing a different
'find' function.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Mediated devices support arbitrary vendor-specific attributes that can
be attached to a mediated device. These attributes are ordered, and are
written to sysfs in order after a device is created. This patch adds
support for these attributes to the mdev data types and XML schema.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently nodeDeviceCreateXML() and nodeDeviceDestroy() only support
NPIV HBAs, but we want to be able to create mdev devices as well. This
is a first step to enabling that support.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When parsing a nodedev xml file, the iommuGroup element should be
optional. This element should be read-only and is determined by the
device driver. While this is a change to existing behavior, it doesn't
break backwards-compatibility because it makes the parser less strict.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some less commonly used drivers were omitted when we switched
the allocator from a plain VIR_ALLOC to virDomainFSDefNew.
https://bugzilla.redhat.com/show_bug.cgi?id=1846450
Fixes: da665fbd48
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by commit 72ab0b6dc8 which
added some code depending on libvirt's log format string into
qemuProcessReadLogOutput. This function was deleted by commit
932534e85f later.
Drop the comment.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Closes: https://gitlab.com/libvirt/libvirt/-/issues/35
In a few cases we might set seclabels on a path outside of
namespaces. For instance, when restoring a domain from a file,
the file is opened, relabelled and only then the namespace is
created and the FD is passed to QEMU (see v6.3.0-rc1~108 for more
info). Therefore, when restoring the label on the restore file,
we must ignore domain namespaces and restore the label directly
in the host.
This bug demonstrates itself when restoring a domain from a block
device. We don't create the block device inside the domain
namespace and thus the following error is reported at the end of
(otherwise successful) restore:
error : virProcessRunInFork:1236 : internal error: child reported (status=125): unable to stat: /dev/sda: No such file or directory
error : virProcessRunInFork:1240 : unable to stat: /dev/sda: No such file or directory
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The function calls virSecurityManagerDomainRestorePathLabel()
after all.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The new name is virSecurityManagerDomainRestorePathLabel().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
After previous commit this function is used no more.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
After previous commit this function is used no more.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There are two places within qemu driver that misuse
qemuSecuritySetSavedStateLabel() to set seclabels on tempfiles
that are not state files: qemuDomainScreenshot() and
qemuDomainMemoryPeek(). They are doing so because of lack of
qemuSecurityDomainSetPathLabel() at the time of their
introduction.
In all three secdrivers (well, four if you count NOP driver) the
implementation of .domainSetSavedStateLabel and
.domainSetPathLabel callbacks is the same anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Libvirt allows the user to define an incomplete NUMA topology, where
the sum of all CPUs in each cell is less than the total of VCPUs.
What ends up happening is that QEMU allocates the non-enumerated CPUs
in the first NUMA node. This behavior is being flagged as 'to be
deprecated' at least since QEMU commit ec78f8114bc4 ("numa: use
possible_cpus for not mapped CPUs check").
In [1], Maxiwell suggested that we forbid the user to define such
topologies. In his review [2], Peter Krempa pointed out that we can't
break existing guests, and suggested that Libvirt should emulate the
QEMU behavior of putting the remaining vCPUs in the first NUMA node
in these cases.
This patch implements Peter Krempa's suggestion. Since we're going
to most likely end up with disjointed NUMA configuration in node 0
after the auto-fill, we're making auto-fill dependent on QEMU_CAPS_NUMA.
A following patch will update the documentation not just to inform
about the auto-fill mechanic with incomplete NUMA topologies, but also
to discourage the user to create such topologies in the future. This
approach also makes Libvirt independent of whether QEMU changes
its current behavior since we're either auto-filling the CPUs in
node 0 or the user (hopefully) is aware that incomplete topologies,
although supported in Libvirt, are to be avoided.
[1] https://www.redhat.com/archives/libvir-list/2019-June/msg00224.html
[2] https://www.redhat.com/archives/libvir-list/2019-June/msg00263.html
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These helpers will be used in an auto-fill feature for incomplete
NUMA topologies in the next patch.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Given our supported platform matrix, we can safely assume that
all the capability constants we need are defined by the system
headers.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Given our supported platform matrix, we can safely assume that
all the clone constants we need are defined by the system
headers.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Given our supported platform matrix, we can safely assume that
all the mount constants we need are defined by the system
headers.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
No default model should be added to the interface
entry at post parse when its actual network type is hostdev
as doing so might cause a mismatch between the interface
definition and its actual device type.
Signed-off-by: Paulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The same functionality can be achieved using migrate-set-parameters QMP
command with xbzrle-cache-size parameter.
https://bugzilla.redhat.com/show_bug.cgi?id=1845012
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The same functionality can be achieved using query-migrate-parameters
QMP command and checking the xbzrle-cache-size parameter.
https://bugzilla.redhat.com/show_bug.cgi?id=1829544
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The same functionality can be achieved using migrate-set-parameters QMP
command with downtime-limit parameter.
https://bugzilla.redhat.com/show_bug.cgi?id=1829543
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The same functionality can be achieved using migrate-set-parameters QMP
command with max-bandwidth parameter.
https://bugzilla.redhat.com/show_bug.cgi?id=1829545
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These parameters were originally set via dedicated commands which are
now deprecated. We want to use migrate-set-parameters instead if
possible.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In v6.4.0-72-g3dda889a44 I've introduced parsing and formatting
of new sysinfo type 'fwcfg'. However, I've forgot to introduce
code that would free parsed data.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function handles the change of NUMA nodeset for a given
guest, setting CpusetMems for the emulator, vcpus and IOThread
sub-groups. It doesn't set the same nodeset to the root cgroup
though. This means that cpuset.mems of the root cgroup ends up
holding the new nodeset and the old nodeset as well. For
a guest with placement=strict, nodeset='0', doing
virsh numatune <vm> 0 8 --live
Will make cpuset.mems of emulator, vcpus and iothread to be
"8", but cpuset.mems of the root cgroup will be "0,8".
This means that any new tasks that ends up landing in the
root cgroup, aside from the emulator/vcpus/iothread sub-groups,
will be split between the old nodeset and the new nodeset,
which is not what we want.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since a08669c31, @tsc is not automatically free'd by any g_auto* method.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since 1f5deed9, @veid_str has been leaked in the error path.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since 60623a7c, @temp_file was not properly free'd on the non error path.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since 9ea90206, @drvpath could be overwritten if we jumped to recheck
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since 5b82f7f3, @path should have been placed inside the for loop
since it'd need to be free'd for each pass through the loop; otherwise,
we'd leak like a sieve.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since 5084091a, @authcred is filled by a g_key_file_get_string which is
now an allocated string as opposed to some hash table lookup value, so
we need to treat it as so.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since 5084091a, @tmp is filled by a g_key_file_get_string which is
now an allocated string as opposed to some hash table lookup value,
so we need to treat it as so.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Domains are now allowed to be pinned to host CPUs with IDs up to 16383.
The new limit is as arbitrary as the old one. It's just bigger.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Implement secure guest check for AMD SEV (Secure Encrypted
Virtualization) in order to invalidate the qemu capabilities
cache in case the availability of the feature changed.
For AMD SEV the verification consists of:
- checking if /sys/module/kvm_amd/parameters/sev contains the
value '1': meaning SEV is enabled in the host kernel;
- checking if /dev/sev exists
Signed-off-by: Paulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This patch introduces a common function to verify if the
availability of the so-called Secure Guest feature on the host
has changed in order to invalidate the qemu capabilities cache.
It can be used as an entry point for verification on different
architectures.
For s390 the verification consists of:
- checking if /sys/firmware/uv is available: meaning the HW
facility is available and the host OS supports it;
- checking if the kernel cmdline contains 'prot_virt=1': meaning
the host OS wants to use the feature.
Whenever the availability of the feature does not match the secure
guest flag in the cache then libvirt will re-build it in order to
pick up the new set of capabilities available.
Signed-off-by: Paulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Introduce two utility functions to parse a kernel command
line string according to the kernel code parsing rules in
order to enable the caller to perform operations such as
verifying whether certain argument=value combinations are
present or retrieving an argument's value.
Signed-off-by: Paulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This was mostly boilerplate conversion, but in one case I needed to
define several differently named char* to take the place of a single
char *tmp that was re-used multiple times, and in another place there
was a single char* that was used at the toplevel of the function, and
then later used repeatedly inside a for loop, so I defined a new
separate char* inside the loop.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we have support for IPv6 in the iptables helpers, and a new
option in the XML schema, we can wire up support for it in the network
driver.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Historically IPv6 did not support NAT, so when IPv6 was added to
libvirt's virtual networks, when requesting <forward mode="nat"/>
libvirt will NOT apply NAT to IPv6 traffic, only IPv4 traffic.
This is an annoying historical design decision as it means we
cannot enable IPv6 automatically. We thus need to introduce a
new attribute
<forward mode="nat">
<nat ipv6="yes"/>
</forward>
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
IPv6 does support masquerade since Linux 3.9.0 / ip6tables 1.4.18,
which is Fedora 18 / RHEL-7 vintage, which covers all our supported
Linux versions.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In v6.4.0-rc1~143 I've introduced a check that is supposed to
return from the function early, if given path is not a dm target.
While the idea is still valid, the implementation had a flaw.
It calls stat() over given path and the uses major(sb.st_dev) to
learn the major of the device. This is then passed to
dm_is_dm_major() which returns true or false depending whether
the device is under devmapper's control or not.
The problem with this approach is in how the major of the device
is obtained - paths managed by devmapper are special files and
thus we want to be using st_rdev instead of st_dev to obtain the
major number. Well, that's what virIsDevMapperDevice() does
already so might as well us that.
Fixes: 01626c668e
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1839992
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When introducing virdevmapper.c (in v4.3.0-rc1~427) I didn't
realize there is a function that calls in devmapper. The function
is called virIsDevMapperDevice() and lives in virutil.c. Now that
we have a special file for handling devmapper move it there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Compilers are not very good at detecting this problem. Fixed by manual
inspection of compilation warnings after replacing 'VIR_FREE' with an
empty macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com
If one of the early checks to get screen resolution fails 'screenData'
would be passed to VIR_FREE uninitialized. Unfortunately the compiler
isn't able to detect this when VIR_FREE is implemented using
g_clear_pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com
'uri_out' may be passed to VIR_FREE uninitialized if 'conn' is NULL.
Unfortunately the compiler isn't able to detect this problem when
VIR_FREE is implemented using g_clear_pointer. Initialize the variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com
This is pretty straightforward and self explanatory.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1837990
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For the case where -fw_cfg uses a file, we need to set the
seclabels on it to allow QEMU the access. While QEMU allows
writing into the file (if specified on the command line), so far
we are enabling reading only and thus we can use read only label
(in case of SELinux).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This capability tracks whether QEMU supports -fw_cfg command line
option, more specifically whether it allows specifying filename.
There are some releases of QEMU which support -fw_cfg but not
filename. If this is ever a problem we can refine the capability
later on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are recommendations and limitations to the name of the
config blobs we need to follow [1].
We don't want users to change any value only add new blobs. This
means, that the name must have "opt/" prefix and at the same time
must not begin with "opt/ovmf" nor "opt/org.qemu" as these are
reserved for OVMF or QEMU respectively.
1: docs/specs/fw_cfg.txt from qemu.git
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has -fw_cfg which allows users to tweak how firmware
configures itself and/or provide new configuration blobs.
Introduce new <sysinfo/> type "fwcfg" that will hold these
new blobs.
It's possible to either specify new value as a string or
provide a filename which contents then serve as the value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Setting OEM strings for a domain was introduced in
v4.1.0-rc1~315. However, any application that wanted to use them
(e.g. to point to an URL where a config file is stored) had to
'dmidecode -u --oem-string N' (where N is index of the string).
Well, we can expose them under our <sysinfo/> XML and if the
domain is running Libvirt inside it can be obtained using
virConnectGetSysinfo() API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since nobody sets custom dmidecode path anymore, we can drop all
code that exists only because of that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Problem with custom dmidecode scripts is that they are hard to
modify, especially if we will want them to act differently based
on passed arguments. So far, we have two scripts which do no more
than 'cat $sysinfo' where $sysinfo is saved dmidecode output.
The virCommandSetDryRun() can be used to trick
virSysinfoReadDMI() thinking it executed real dmidecode.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When trying to decode DMI table, just before constructing
virCommand() the decoder is looked for in PATH using
virFindFileInPath(). Well, this is not necessary because
virCommandRun() will do this too (in virExec()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Virtually every variable defined in the function can be freed
automatically when going out of scope.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Before QEMU introduced migratable CPU property, "-cpu host" included all
features that could be enabled on the host, even those which would block
migration. In other words, the default was equivalent to migratable=off.
When the migratable property was introduced, the default changed to
migratable=on. Let's record the default in domain XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The attribute is only allowed for host-passthrough CPUs and it can be
used to request only migratable or all supported features to be enabled
in the virtual CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
