Add test cases for merging various pairs of bitmaps when snapshots were
created together with checkpoints.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow deleting of checkpoints when snapshots were created along. The
code tracks and modifies the checkpoint list so that backups can still
be taken with such a backing chain. This unfortunately requires to
rename few bitmaps (by copying and deleting them) in some cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a faked qemu output which would simulate scenario where libvirt
would take a snapshot and checkpoint simultaneously. This is visible in
libvirt-2-format node where bitmap 'c' appears, but bitmap 'b' which is
active in the previous layer is not present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add all intermediate steps and deletion of the current checkpoint on a
flat (single-image) disk image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add test infrastructure and a basic test for bitmap deletion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The location of virt-aa-helper shown in the docs is incorrect.
The helper binary is installed under libexec dir.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The configure script allows users to specify different paths for
/etc/, /usr/sbin/, /var/run/ and /usr/libexec/. Instead of
assuming user will pass expected value, generate the apparmor
profiles using the actual values.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This requires stealing one cmd pointer before returning it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Mark eligible declarations as g_autofree and remove
the corresponding VIR_FREE calls.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Always trim the full specified suffix.
All of the callers outside of tests were passing either
strlen or the actual length of the string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Replace all the cases that only supply the length
and do not care about matching a suffix, as well
as that one test case that does.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Just like the existing virBufferTrim, but only
does one thing at a time.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As discussed on the developer list, parallel migration connections
are not compatible with tunneled migration
https://www.redhat.com/archives/libvir-list/2020-January/msg00463.html
Prohibit the concurrent use of parallel and tunneled migration options.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
LXC version 3 config files are still using network old style definition.
So, as LXC supports it now, they can be converted to use this new
definition.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Domain definition is useless now inside network structure. This pointer
was required because new network definition was being added each time
that a new network type appeared. So, this should be processed into
old function `lxcNetworkParseDataType()`. Now, as it was moved to an
array, it can be handle together each interface pointer.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
LXC version 3 or higher introduced indexes for network interfaces.
Libvirt should be able to parse entries like `lxc.net.2.KEY`. This
commit adds functions to parse this type of field. That's why array
structures are so important this time.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Struct lxcNetworkParseData is being used as a single pointer which
iterates through LXC config lines. It means that it will be applied as a
network each time that a new type appears. After, the same struct is
used to populate a new network interface. This commit changes this logic
to multiple lxcNetworkParseData to move this strcuture to an array. It
makes more sense if we are using indexes to fill interface settings.
This is better to improve code clarity.
This commit still introduces *Legacy() functions to keep support of
network old style definitions.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This will be the first QEMU version that will support the
kvm-no-adjvtime CPU feature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now, that every use of virAtomic was replaced with its g_atomic
equivalent, let's remove the module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In future commits our virAtomic* APIs will be replaced with their
GLib variants. Instead of trying to update the test after each
commit and eventually removing the test anyway, remove it upfront
and save the hassle.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of calling virAtomicIntAdd(&var, 1); we can call
g_atomic_int_add() directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
rpmlint complains about "script-without-shebang" due to the execute
permissions on /usr/share/bash-completion/completions/vsh. Use
INSTALL_DATA instead of INSTALL_SCRIPT to avoid the unnecessary
execute permissions.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The rewrite to use GLib's atomic ops functions changed the behavior
of virAtomicIntInc - before it returned the pre-increment value.
Most of the callers using its value were adjusted, but the one
in qemuDriverAllocateID was not. If libvirtd would reconnect to
a running domain during startup, the next started domain would get
the same ID:
$ virsh list
Id Name State
--------------------------
1 f28live running
1 f28live1 running
Use the g_atomic_add function directly (as recommended in viratomic.h)
and add 1 to the result.
This also restores the usual numbering from 1 instead of 0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 7b9645a7d1
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Starting on commit 1f43393283, qemuDomainFillDeviceIsolationGroup()
returns 0 in all circunstances. Let's turn it to 'void' make it
clearer that the function will not fail. This also spares a
check for < 0 return in qemu_hotplug.c. The
qemuDomainFillDeviceIsolationGroupIter() callback now returns
0 at all times - which is already happening anyway.
Refer to 1f43393283 commit message for more details on why
the function was changed to never return an error.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuDomainChrDefDropDefaultPath() returns an int, but it's
always returning 0. Callers are checking for result < 0 to
run their cleanup code needlessly.
Turn the function to 'void' and adjust the callers.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Avoid some of the virObjectUnref() calls by using g_autoptr.
Aside from the 'cleanup' label in qemuDomainSetFakeReboot(),
all other now deprecated cleanup labels will be removed in
the next patch.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree to remove VIR_FREE() calls used for cleanups.
Labels that became deprecated will be removed in a later
patch.
In qemuDomainSetupDisk(), the 'dst' variable is not used at
all and could be removed.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'caps' variable in qemuDomainObjPrivateXMLParseAutomaticPlacement()
is set to auto clean via g_autoptr(), but a 'virObjectUnref(caps)' is
being executed in the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previous patch used 'g_autofree' to eliminate instances of
VIR_FREE(), making some cleanup labels obsolete. This
patch removes them.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree in strings when possible to spare a VIR_FREE()
call. Unneeded 'cleanup' labels will be taken care of in the
next patch.
The 'str' string in virDomainVirtioSerialAddrReserve() was
never used by the logic, only being used in cleanup by
VIR_FREE(). Let's remove it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With -blockdev we must look up via the nodename rather than the 'drive'
alias which is not present any more.
This fixes the pre-creation of storage volumes on migration with
non-shared storage.
https://bugzilla.redhat.com/show_bug.cgi?id=1793263
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Swithc to the helper which doesn't require checking of the return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The data is gathered only once so we can move the whole block which
fetches the data out of the loop and get rid of the logic which
prevents multiple calls.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor the logic to skip the body of the function if there's nothing
to do.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are two calls to virHashNew which check the return value. It's not
necessary any more as virHashNew always returns a valid pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This module has last two direct checks whether the value returned by
virHashCreateFull is NULL. Remove them so that static analyzers don't
get the false idea that checking the value is necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the glib helpers and remove the mention of returning NULL on failure
of virHashNew, virHashCreate and virHashCreateFull.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is updating the releases and resources links so they point now to
crates.io for the releases and docs.rs for the api ref.
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@canonical.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
