We don't use the lib prefix for all libraries but in these cases it
makes sense to use the prefix.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
If readline is detected using pkg-config it would ignore the readline
option.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
If libpcap is detected using pkg-config it would ignore the libpcap
option.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Bug fixes and comments specific to older versions have been removed.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Followup of commit a79e7639da and
commit 7556ab139f
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Somehow this check was duplicated just below the original.
(I was at first skeptical that it's needed at all, since
GET_VLAN_VID_CMD was already present in kernel 2.6.32, but then I
realized that there is no higher level check for __linux__ around the
code that is conditional on WITH_DECL_GET_VLAN_VID_CMD; it only checks
for SIOCGIFVLAN and WITH_STRUCT_IFREQ - the latter is also present on
*BSD platforms, the former doesn't seem to be anywhere but Linux, but
I didn't want to change the effect of the conditional, so I left it in
(we could have also replaced WITH_DECL_GET_VLAN_VID_CMD, but possibly
there is a non-Linux platform that *does* have it...)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This flag was originally created to indicate that either 1) the build
platform wasn't linux, 2) the build platform was linux, but the kernel
was too old to have macvtap support. Since there was already a switch
there, the ability to also disable it when 3) the kernel supports
macvtap but the user doesn't want it, was added in. I don't think that
(3) was ever an intentional goal, just something that grew naturally
out of having the flag there in the first place (unless possibly the
original author wanted a way to quickly disable their new code in case
it caused regressions elsewhere).
Now that the check for (2) has been removed, WITH_MACVTAP is just
checking (1) and (3), but (3) is pointless (because the extra code in
libvirt itself is miniscule, and the only external library needed for
it is libnl, which is also required for other unrelated features (and
itself has no subordinate dependencies and takes up < 1MB on
disk)). We can therfore eliminate the WITH_MACVTAP flag, as it is
functionally equivalent to WITH_LIBNL (which implies __linux__).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
macvtap support was added to the Linux kernel in 2.6.33. libvirt
checked for this by looking for MACVLAN_MODE_BRIDGE and IFLA_VF_MAX in
linux/if_link.h. This hasn't been necessary for a very long time, so
just gate on platform == 'linux' (and be sure to complain if someone
tries to enable it on a non-Linux platform).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
macvlan support was added to the Linux kernel in 2.6.33, but
MACVLAN_MODE_PASSTHRU wasn't added until 2.6.38, so a workaround had
been put in place to define that constant on those few systems where
it was missing. It's useful like was probably 6 months at most, but
it's been there for over 10 years.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
WITH_VIRTUALPORT just checks that we are building on Linux and that
IFLA_PORT_MAX is defined in linux/if_link.h. Back when 802.11Qb[gh]
support was added, the IFLA_* stuff was new (introduced in kernel
2.6.35, backported to RHEL6 2.6.32 kernel at some point), and so this
extra check was necessary, because libvirt was being built on Linux
distros that didn't yet have IFLA_* (e.g. older RHEL6, all
RHEL5). It's been in the kernel for a *very* long time now, so all
supported versions of all Linux platforms libvirt builds on have it.
Note that the above paragraph implies that the conditional compilation
should be changed to #if defined(__linux__). However, the astute
reader will notice that the code in question is sending and receiving
netlink messages, so it really should be conditional on WITH_LIBNL
(which implies __linux__) instead, so that's what this patch does.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We stopped supporting Ubuntu 16.04 earlier in the year in:
commit 57e9f3a7e0
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Mon May 4 13:06:56 2020 +0100
gitlab: update list of distros to use latest versions
So there is no reason to keep the HTML4 variants of rst2html around.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The libutil.h we are after is explicitly only something we want on
FreeBSD, we don't want to accidentally pick up this header on other
platforms as it can lead to build failures.
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It's useful information to have available at a glance.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
With libdbus our wrappers had a special syntax to create the DBus
messages by defining the DBus message signature followed by list
of arguments providing data based on the signature.
There will be no similar helper with GLib implementation as they
provide same functionality via GVariant APIs. The syntax is slightly
different mostly for how arrays, variadic types and dictionaries are
created/parsed.
Additional difference is that with GLib DBus everything is wrapped in
extra tuple (struct). For more details refer to the documentation [1].
[1] <https://developer.gnome.org/glib/stable/gvariant-format-strings.html>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There was one attempt a year ago done by me to drop HAL [1] but it was
never resolved. There was another time when Dan suggested to drop HAL
driver [2] but it was decided to keep it around in case device
assignment will be implemented for FreeBSD and the fact that
virt-manager uses node device driver [3].
I checked git history and code and it doesn't look like bhyve supports
device assignment so from that POV it should not block removing HAL.
The argument about virt-manager is not strong as well because libvirt
installed from FreeBSD packages doesn't have HAL support so it will not
affect these users as well [4].
The only users affected by this change would be the ones compiling
libvirt from GIT on FreeBSD.
I looked into alternatives and there is libudev-devd package on FreeBSD
but unfortunately it doesn't work as it doesn't list any devices when
used with libvirt. It provides libudev APIs using devd.
I also looked into devd directly and it provides some APIs but there are
no APIs for device monitoring and events so that would have to be
somehow done by libvirt.
Main motivation for dropping HAL support is to replace libdbus with GLib
dbus implementation and it cannot be done with HAL driver present in
libvirt because HAL APIs heavily depends on symbols provided by libdbus.
[1] <https://www.redhat.com/archives/libvir-list/2019-May/msg00203.html>
[2] <https://www.redhat.com/archives/libvir-list/2016-April/msg00992.html>
[3] <https://www.redhat.com/archives/libvir-list/2016-April/msg00994.html>
[4] <https://svnweb.freebsd.org/ports/head/devel/libvirt/Makefile?view=markup>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function was introduced in the 2.0.6 release which happened
in December 2010. I think it is safe to assume that all libnuma
we deal with have the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We are currently adding -lutil and -lkvm to the linker using the
add_project_link_arguments method. On FreeBSD 11.4, this results in
build errors because the args appear too early in the command line.
We need to pass the libraries as dependencies so that they get placed
at the same point in the linker args as other dependencies.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A wireshark plugin must declare what major and minor version it
was built with as these are checked when wireshark loads plugins.
On the top of that, we use major + minor + micro to adapt to
changed API between releases. So far, we were getting these
version numbers from wireshark/config.h.
And while most distributions install wireshark/config.h file some
don't. On distros shipping it it's hack^Wsaved during built by
packaging system and installed later. But some distros are not
doing that. At least not for new enough wireshark because as of
wireshark's commit v2.9.0~1273 the ws_version.h is installed
which contains the version macros we need and is installed by
wireshark itself.
But of course, some distros which have new enough wireshark
packaged do not ship ws_version.h and stick to the hack. That is
why we can't simply bump the minimal version and switch to the
new header file. We need a configure check and adopt our code to
deal with both ways. At least for the time being.
Based on Andrea's original patch:
https://www.redhat.com/archives/libvir-list/2020-September/msg00156.html
Closes: https://gitlab.com/libvirt/libvirt/-/issues/74
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
If someone runs `meson setup --buildtype plain` meson ignores
warning_level=2 that is in our meson.build file. The implication is
that Meson will not automatically add -Wall which enables -Wformat.
This breaks building libvirt from git with the buildtype set to plain.
There is an issue reported [1] to not ignore warning_level silently
and the change to ignore it was done by upstream commit [2].
This change makes Meson print warnings about using warning_level which
as described above doesn't work for all build types.
[1] <https://github.com/mesonbuild/meson/issues/7399>
[2] <8ee1c9a07a>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we have moved to Meson, we are no longer required to
use a specific name for this file, and since the rest of our
documentation is in reStructuredText format and uses a matching
file extension, we can give the AUTHORS file the same treatment.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, we are mixing: #if HAVE_BLAH with #if WITH_BLAH.
Things got way better with Pavel's work on meson, but apparently,
mixing these two lead to confusing and easy to miss bugs (see
31fb929eca for instance). While we were forced to use HAVE_
prefix with autotools, we are free to chose our own prefix with
meson and since WITH_ prefix appears to be more popular let's use
it everywhere.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In meson.build, we check for presence of unshare() function
explicitly (even though there is the function usability check a
few hundred lines below), but never have any code depending on
HAVE_UNSHARE. The same applies to stdarg.h and sys/sysctl.h
header files - either we simply include them or guard their
include using different conditionals.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a configuration option for specifying location of the qemu modules
directory, defaulting to /usr/lib64/qemu. Then use this location to
check for changes in the directory, indicating that a qemu module has
changed and capabilities need to be reprobed.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use https: links for websites that support them.
The URIs which are used as namespace identifiers
are left alone.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
On some platforms libm (needed for the pow() function) isn't being
linked in somehow. This patch adds the necessary bits to assure that
it's linked in when necessary.
Suggested-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit 20a62b42ec001310a6329d7ee2021f0737d534ef)
This patch takes care of just the obvious cases: there are
many more situations where the data we pass to configure_file()
could likely be obtained in a more effective way, but we can
address the low-hanging fruits as a first approximation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that all the users have been converted or silenced,
let's enable this warning.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now we're unconditionally adding RPATH information to the
installed binaries and libraries, but that's not always desired.
autotools seem to be smart enough to only include that information
when targeting a non-standard prefix, so most distro packages
don't actually contain it; moreover, both Debian and Fedora have
wiki pages encouraging packagers to avoid setting RPATH:
https://wiki.debian.org/RpathIssuehttps://fedoraproject.org/wiki/RPath_Packaging_Draft
Implement RPATH logic that Does The Right Thing™ in the most
common cases, while still offering users the ability to override
the default behavior if they have specific needs.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
src/security/apparmor/meson.build builds this path dynamically
based on the value of sysconfdir, so we should do the same here
or the code and the filesystem might end up disagreeing.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
This variable is used in src/security/meson.build to decide
whether to install the AppArmor profiles, and at the moment
even when the user specifies -Dapparmor_profiles=true they
don't get installed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
When checking for ifconfig(8), set not only IFCONFIG value,
but also IFCONFIG_PATH as it's used in util/virnetdevip.c.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add missing prerequisite headers for checking BRDGSFD, BRDGADD,
BRDGDEL in net/if_bridgevar.h.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add missing prerequisite headers for checking link_addr(3)
in net/if_dl.h.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit <74416b1d4849ef77ef31de5344dd75f03094434b> added check for
rl_completion_quote_character to make sure we have correct readline
library. Commit <a9443bc9a9ef451b46306e66ed3b706756fc1414> added
inaccurate comment that it's a function.
We need to check for generic symbol instead of checking for function.
In addition the readline/readline.h file requires stdio.h to by included
beforehand which was done in autotools but I dropped it in meson.
And lastly the final condition to print error or disable readline was
broken as well by replacing the readline_dep every time if readline was
not explicitly enabled.
Reported-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that the rewrite is complete it is safe to drop this option and the
corresponding error message.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
This changes the approach used with autotools where it was separate make
target. With meson it will be part of the `meson test` target but can be
disabled using --no-suite syntax-check or we can run only syntax-check
by using --suite syntax-check.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
WARN_FLAGS are not relevant for meson as all warning flags are set to
the whole project using add_project_arguments().
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
With meson we have to use both env vars and wrapper script to run python
with correct LANG settings.
run_command() and test() have 'env' attribute so we can use it, but
custom_target() doesn't support that attribute. Environment variables
cannot by configured using 'command' because meson checks if the first
item in the list is executable so we have to use a wrapper.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Convert #if VAL into #ifdef VAL in order to make meson more readable and
because it's not necessary to have both defines existing.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
APPARMOR_MOUNT is not used so dropping it in meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>