Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This enum was introduced to model how RHEL-7 kernel behaves - for
some reason going with the old way (via new_id + bind) fails but
using driver_override succeeds. Well, we don't need to care about
that anymore since we don't create new_id file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that PCI attach/detach happens solely via driver_override
these two files are no longer needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that nothing supports "pci-stub" driver (aka KVM style of PCI
device assignment) there is no need for virpcimock to create it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
As stated in 84f9358b18 all kernels that we are interested in
have 'drivers_override'. Drop the other, older style of
overriding PCI device driver - newid.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function is no longer used after previous commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that no one uses KVM style of PCI assignment we can safely
remove 'pci-stub' backend.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The KVM assignment is going to be removed shortly. Don't let the
hostdev module configure it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
After previous commits, the function is not used anymore.
Remove it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are two places where we need to create virPCIDevice from
given virDomainHostdevDef. In both places the code is duplicated.
Move them into a single function and call it from those two
places.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The KVM assignment was removed in qemu driver in previous commit.
Remove it from domaincapstest too which is hard coding it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
KVM style of PCI devices assignment was dropped in kernel in
favor of vfio pci (see kernel commit v4.12-rc1~68^2~65). Since
vfio is around for quite some time now and is far superior
discourage people in using KVM style.
Ideally, I'd make QEMU_CAPS_VFIO_PCI implicitly assumed but turns
out qemu-3.0.0 doesn't support vfio-pci device for RISC-V.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1711789
Starting up or building some types of pools may take a very long
time (e.g. a misconfigured NFS). Holding the pool object locked
throughout the whole time hurts concurrency, e.g. if there's
another thread that is listing all the pools.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In near future the storage pool object lock will be released
during startPool and buildPool callback (in some backends). But
this means that another thread may acquire the pool object lock
and change its definition rendering the former thread access not
only stale definition but also access freed memory
(virStoragePoolObjAssignDef() will free old def when setting a
new one).
One way out of this would be to have the pool appear as active
because our code deals with obj->def and obj->newdef just fine.
But we can't declare a pool as active if it's not started or
still building up. Therefore, have a boolean flag that is very
similar and forces virStoragePoolObjAssignDef() to store new
definition in obj->newdef even for an inactive pool. In turn, we
have to move the definition to correct place when unsetting the
flag. But that's as easy as calling
virStoragePoolUpdateInactive().
Technically speaking, change made to
storageDriverAutostartCallback() is not needed because until
storage driver is initialized no storage API can run therefore
there can't be anyone wanting to change the pool's definition.
But I'm doing the change there for consistency anyways.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If there's a persistent storage and user tries to start a new one
with the same name and UUID (e.g. to test new configuration) it
may happen that upon failure we lose the persistent defintion.
Fortunately, we don't remove it from the disk only from the
internal list of the pools.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This flag can be used to denote that the definition we're trying
to assign to a pool object is live definition and thus the
inactive definition should be saved into ->newDef.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate storage pool definition assignment into a function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There will be more boolean information that we want to pass to
this function. Instead of having them in separate arguments per
each one, use @flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function is doing much more than plain assigning pool
definition to a pool object. Rename it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no need for this function to call
virStoragePoolObjEndAPI(). The object is perfectly usable after
return from this function. In fact, all callers will call
virStoragePoolObjEndAPI() eventually.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function comment mistakenly refers to 'poolptr' when in fact
the variable is named 'objptr'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turns out there's one callback that might remove a storage pool
during its run: storagePoolUpdateAllState() call
storagePoolUpdateStateCallback() which may call
virStoragePoolUpdateInactive() which in turn may call
virStoragePoolObjRemove(). Problem is that the
UpdateStateCallback() sees a storage pool object with just two
references: one for each hash table holding the object. If the
function ends up calling ObjRemove() then upon removing the
object from hash tables those references are gone and thus any
subsequent call touching the object is invalid.
The solution to this problem is to grab reference for the object
we are running iterator with.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fact that we're removing a pool object from the list of pools
doesn't mean we want to unlock it. It violates locking policy
too as object locking and unlocking is not done on the same
level.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It may happen that we leave some XATTRs behind. For instance, on
a sudden power loss, the host just shuts down without calling
restore on domain paths. This creates a problem, because when the
host starts up again, the XATTRs are there but they don't reflect
the true state and this may result in libvirt denying start of a
domain.
To solve this, save a unique timestamp (host boot time) among
with our XATTRs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1741140
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This module contains function to get host boot time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
If user has two domains, each have the same disk (configured for
RW) but each runs with different seclabel then we deny start of
the second domain because in order to do that we would need to
relabel the disk but that would cut the first domain off. Even if
we did not do that, qemu would fail to start because it would be
unable to lock the disk image for the second time. So far, this
behaviour is expected. But what is not expected is that we
increase the refcounter in XATTRs and leave it like that.
What happens is that when the second domain starts,
virSecuritySetRememberedLabel() is called, and since there are
XATTRs from the first domain it increments the refcounter and
returns it (refcounter == 2 at this point). Then callers
(virSecurityDACSetOwnership() and
virSecuritySELinuxSetFileconHelper()) realize that refcounter is
greater than 1 and desired seclabel doesn't match the one the
disk image already has and an error is produced. But the
refcounter is never decremented.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1740024
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Simplify the command line formatter by complicating the validator.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In preparation to moving the validation to the parser,
we need to supply the correct caps.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Apparently /proc/self is automatically converted to /proc/@{pid}
before checking rules, which makes spelling it out explicitly
redundant.
Suggested-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The function takes raw UUID and formats it into string
representation. However, the comment mistakenly states that the
expected size of raw UUID buffer is VIR_UUID_RAW_LEN bytes. We
don't have such constant since v0.3.2~24. It should have been
VIR_UUID_BUFLEN.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that we're using sudo, the initial work directory is no
longer relevant since the user will find themselves in their
home directory when they get control anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order for the prepare script to be really useful, it needs
to be able to perform privileged operations such as installing
additional packages or setting up custom mount points.
In order to achieve that, we now run the container as root,
run the prepare script with full privilege, and only then
switch to the unprivileged account with sudo.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This script is run before $(CI_BUILD_SCRIPT) and can be used
to tweak the environment as necessary before the build starts.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both for ci-build and ci-shell we want to execute basically
the same setup and cleanup logic, the only difference being
that for the former we then run the build script and with the
latter a shell.
Rework the targets so that they both call the generic
ci-run-command rule passing an appropriate $(CI_COMMAND).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of hardcoding build instructions into the Makefile,
move them to a separate script that's mounted into the
container.
This gives us a couple of advantages: we no longer have to
deal with the awkward quoting required when embedding shell
code in a Makefile, and we also provide the users with a way
to override the default build instructions with their own.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we have a home directory for the user, storing the
source there rather than in a custom top-level directory is
the obvious choice.
Later on we're also going to add some more files related to
builds, and storing everything in the user's home directory
will keep things nice and tidy.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some applications expect the user's home directory to be
present on the system and require workarounds when that's not
the case. Creating the home directory along with everything
else is easy enough for us, so let's just do that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We're going to have a few more CI-related files in a second, and
it makes sense to have a separate directory for them rather than
littering the root directory.
$(CI_SCRATCHDIR) can now also be created inside the CI directory,
and as a bonus the make rune necessary to start CI builds without
running configure first becomes shorter.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We only use the list of submodules once, so no need to
store it in a variable.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The $ needs to be escaped when calling shell code from a
Makefile.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Store the namespace URI as const char*, instead of in a function.
Suggested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
