QEMU 2.11 for ppc64 changed all CPU model names to lower case. Since
libvirt can't change the model names for compatibility reasons, we need
to translate the matching lower case models to the names known by
libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The '-realtime mlock' cmd line argument was introduced in QEMU
commit v1.5.0-rc0~190 which matches minimal QEMU version we
require. Therefore, the capability will always be present.
Apparently, nearly none of our xml2argv test cases had the
capability hence slightly bigger change under qemuxml2argvdata/.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'blockdev-snapshot-sync' is present in QEMU since v0.14.0-rc0 and
'transaction' since v1.1.0 (52e7c241ac766406f05fa)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu added the 'drive-mirror' command in v1.3.0 (d9b902db3fb71fdc)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu added the 'block-commit' command in v1.3.0 (ed61fc10e8c8d2)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This was detected by the presence of 'block-stream' which is present in
qemu since v1.1 (db58f9c0605fa151b8c4)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since commit a7424faff QMP is always used.
Also, commit 932534e8 removed the last use of this apart from:
* parsing/formatting this in the caps cache
* using it as a temporary variable to know when to report an error
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The split of ide-disk into the two separate devices was introduced by
qemu commit 1f56e32a7f4b3 released in qemu v0.15.
Note that when compared to the previous commit which made sure that no
disk related tests were touched, in this case it's not as careful.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The split of scsi-disk into the two separate devices was introduced by
qemu commit b443ae67 released in qemu v0.15.
All changes to test files are not really related to disk testing thanks
to previous refactors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
To avoid changes to the filled in microcode in case we change the caps
replies file for any reason make the number depend on the filename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This capability tracks if memory-backend-file has the align
attribute or not.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a capability check for IOThread polling (all were added at the
same time, so only one check is necessary).
Based on code originally posted by Pavel Hrdina <phrdina@redhat.com>
with the only changes to include the more recent QEMU releases.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU 3.1 should only expose the property if the host is actually
capable of creating hugetable-backed memfd. However, it may fail
at runtime depending on requested "hugetlbsize".
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It was already available in 1.5.0, so we can assume it's
present and avoid checking for it at runtime.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The capability was introduced in QEMU 1.5.0, which is our
minimum supported QEMU version these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was introduced in QEMU 1.3.1 and we require
QEMU 1.5.0 these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previous commits removed all capabilities from per-device property
probing for:
pci-assign
kvm-pci-assign
usb-host
scsi-generic
Remove them from the virQEMUCapsDeviceProps list and get rid of the
redundant device-list-properties QMP calls.
Note that 'pci-assign' was already useless, because the QMP version
of the device is called 'kvm-pci-assign', see libvirt commit 7257480
from 2012.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by QEMU commit 28b77657 in v1.0-rc4~21^2~8.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by QEMU commit c29029d which was included in 1.5.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Added by commit fc66c1603c and not used since.
Also, the device was present in QEMU 1.5.0 so this capability
will not be needed if we ever decide to implement usb-net support.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We don't honour the QEMU default machine type anymore, always using the
libvirt chosen default instead. The QEMU argv parser, however, will need
to know the exacty QEMU default, so we must record that info.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The capability was usable since qemu 1.3 so we can remove all the
detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For versions where we can probe that the arguments are optional we can
perform the probing by a schema query rather than sending a separate
command to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported
qemu versions now use it.
There's a LOT of test fallout as we did not use capabilities close
enough to upstream for many of our tests.
Several tests had a 'bootindex' variant. Since they'd become redundant
they are also removed here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU 2.12 introduced a new vfio-pci device option 'display=on/off/auto'.
This patch introduces the necessary capability.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since QEMU 2.10, it's possible to use a new type of display -
egl-headless which uses drm nodes to provide OpenGL support. This patch
adds a capability for that. However, since QEMU doesn't provide a QMP
command to probe it, we have to base the capability on specific QEMU
version.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Use qemuMonitorTestNewFromFileFull which allows to test commands used
along with providing replies. This has two advantages:
1) It's easier to see which command was used when looking at the files
2) We check that the used commands are actually in the correct order
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Extend the QEMU capabilities with tpm-emulator support.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU >= 2.12 will support passing of pre-opened file descriptors for
socket based character devices.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The capability also represents that 'blockdev-add' is functional. It's
necessary to detect it via presence of 'blockdev-del' since blockdev-add
did not have the unsupported 'x-blockdev-add' version previously and
thus would be marked as present even if we could not use it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit 766d5c1b deprecated the capability, because we were assuming
it for every QEMU binary. At the time of the introduction, there
was no way to probe for this via QMP.
However since QEMU 1.5.0 (which is the earliest version we support)
we can rely on the query-command-line-options command to detect this
feature.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
As of v2.12.0-rc0~32^2 QEMU is capable specifying which display
device and head should the screendump be taken from. Track this
capability so that we can use it later in our virDomainScreenshot
API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Support OpenGL acceleration capability when using SDL graphics.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability tracks if memory-backend-file has discard-data
attribute or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability tracks if qemu has "qom-list-properties" monitor
command.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The NBD server in qemu supports TLS transport. Detect this capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU translates the cache mode of a disk internally into 3 flags.
'write-cache' is a flag of the frontend while others are flag of the
backing storage. Add capability which will allow expressing it via the
frontend attribute.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Detect whether QEMU supports the QMP query-cpus-fast API
and set QEMU_CAPS_QUERY_CPUS_FAST in this case.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
QEMU commit 1bd6152 changed the default behavior from whitelist
to blacklist and introduced a few sets of system calls.
Use the 'elevateprivileges' parameter of -sandbox as a witness
of this change.
https://bugzilla.redhat.com/show_bug.cgi?id=1492597
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
