This function tries to look up desired option for a given parsed
command. Upon successful return it also stores option position
into passed *opt_index. Now, this variable is type of int, even
though it is never ever used to store negative value. Moreover,
the variable is set from a local variable which is type of
size_t.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This previous commit
commit cd9fcc8be7
Author: Michal Privoznik <mprivozn@redhat.com>
Date: Wed Jul 27 16:58:32 2016 +0200
libvirt.spec.in: Adapt to newest wireshark plugindir
Adapted the libvirt spec for wireshark >= 2.1.0 but
this ignored the fact that we enable wireshark from
Fedora 21 and 2.1.0 was only added in Fedora 24
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The current LUKS support has a "luks" volume type which has
a "luks" encryption format.
This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)
IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.
IOW, when creating a storage volume we should use this XML
<volume>
<name>demo.raw</name>
<capacity>5368709120</capacity>
<target>
<format type='raw'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</target>
</volume>
and when configuring a guest disk we should use
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/home/berrange/VirtualMachines/demo.raw'/>
<target dev='sda' bus='scsi'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</disk>
This commit thus removes the "luks" storage volume type added
in
commit 318ebb36f1
Author: John Ferlan <jferlan@redhat.com>
Date: Tue Jun 21 12:59:54 2016 -0400
util: Add 'luks' to the FileTypeInfo
The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.
The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.
The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format. I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Refactor the virStorageFileMatchesNNN methods so that
they don't take a struct FileFormatInfo parameter, but
instead get the actual raw dat items they needs. This
will facilitate reuse in other contexts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the old days, when wireshark plugin was introduced it was
installed under /usr/lib64/wireshark/plugins/$VERSION/ while with
wireshark-2.1.0 this path has changed just to
/usr/lib64/wireshark/plugins. We should teach our spec file about
this change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So, when building wireshark plugin, we get the plugindir variable
from the wireshark.pc as well as prefix. Then we replace the
prefix in the plugindir with our own prefix where libvirt is
building to:
plugindir="${prefix}${plugindir#ws_prefix}"
However, as you can see, there's '$' missing in front of the
ws_prefix variable. This results in the mangled plugindir, for
instance like this:
plugindir='/usr/usr/lib64/wireshark/plugins'
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
To collect all balloon statistics for all guests it was necessary to make
several libvirt requests. Now it's possible to get all balloon statiscs via
single connectGetAllDomainStats call.
Signed-off-by: Derbyshev Dmitry <dderbyshev@virtuozzo.com>
There's been a forgotten fragment (copy-paste error probably) in the
virt-admin's man page referring the reader to our web page on how to construct
URIs in case of remote access, which sort of implies that we support it which
we don't at the moment, so better remove that.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
To allow using failover with gluster it's necessary to specify multiple
volume hosts. Add support for starting qemu with such configurations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
To allow richer definitions of disk sources add infrastructure that will
allow to register functionst generating a JSON object based definition.
This infrastructure will then convert the definition to the proper
command line syntax and use it in cases where it's necessary. This will
allow to keep legacy definitions for back-compat when possible and use
the new definitions for the configurations requiring them.
Add support for converting objects nested in arrays with a numbering
discriminator on the command line. This syntax is used for the
object-based specification of disk source properties.
As gluster natively supports multiple hosts for failover reasons we can
easily add the support to the storage driver code in libvirt.
Extract the code setting an individual host into a separate function and
call them in a loop. The new code also tries to keep the debug log
entries sane.
Extract the code so that it can be called from multiple places. This
also removes a tricky fallthrough in the large switch in
qemuBuildNetworkDriveStr.
Add a modular parser that will allow to parse 'json' backing definitions
that are supported by qemu. The initial implementation adds support for
the 'file' driver.
Due to the approach qemu took to implement the JSON backing strings it's
possible to specify them in two approaches.
The object approach:
json:{ "file" : { "driver":"file",
"filename":"/path/to/file"
}
}
And a partially flattened approach:
json:{"file.driver":"file"
"file.filename":"/path/to/file"
}
Both of the above are supported by qemu and by the code added in this
commit. The current implementation de-flattens the first level ('file.')
if possible and required. Other handling may be added later but
currently only one level was possible anyways.
The cur_balloon also increases/decreases with dimm hotplug/unplug.
To be consistent, adjust the value for coldplug too. This was inconsistently
taken care when cur_ballon != memory to begin with. The patch fixes it
irrespective of that.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since commit c4bdff19, the path to the configuration file has been constructed
in the following manner:
- if no config filename was passed to virConfLoadConfigPath, libvirt.conf was
used as default
- otherwise the filename was concatenated with
"<config_dir>/libvirt/libvirt%s%s.conf" which in admin case resulted in
"libvirt-libvirt-admin.conf.conf". Obviously, this non-existent config led to
ignoring all user settings in libvirt-admin.conf. This patch requires the
config filename to be always provided as an argument with the concatenation
being simplified.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1357364
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Kimchi is a open-source interface to kvm. It runs with HTML5, simple and
easy to manage kvm guests.
Signed-off-by: Ramon Medeiros <ramonn@linux.vnet.ibm.com>
For use with memory hotplug virQEMUBuildCommandLineJSONRecurse attempted
to format JSON arrays as bitmap on the command line. Make the formatter
function configurable so that it can be reused with different syntaxes
of arrays such as numbered arrays for use with disk sources.
This patch extracts the code and adds a parameter for the function that
will allow to plug in different formatters.
Until now the JSON->commandline convertor was used only for objects
created by qemu. To allow reusing it with disk formatter we'll need to
escape ',' as usual in qemu commandlines.
Refactor the command line generator by adding a wrapper (with
documentation) that will handle the outermost object iteration.
This patch also renames the functions and tweaks the error message for
nested arrays to be more universal.
The new function is then reused to simplify qemucommandutiltest.
As we already test that the extraction of the backing store string works
well additional tests for the backing store string parser can be made
simpler.
Export virStorageSourceNewFromBackingAbsolute and use it to parse the
backing store strings, format them using virDomainDiskSourceFormat and
match them against expected XMLs.
Failure to parse a XML that was not supposed to fail would result into a
crash in the test suite as the vcpu bitmap would not be filled prior to
the active XML->XML test.
Skip formatting of the vcpu snippet in the fake status XML formatter in
such case to avoid the crash. The test would fail anyways.
Nothing in the code path after the removed call has needs/uses the alias
anyway (as would be the case for command line building or talking to monitor).
The alias is VIR_FREE'd in virDomainDeviceInfoClear which is called for any
device that needs/uses an alias via virDomainDeviceDefFree or virDomainDefFree
as well as during virDomainDeviceInfoFree for host devices.
For persistent domains, the domain definition (including aliases) gets
freed a few screens later when it's replaced with newDef.
For transient domains, the definition is freed/unref'd along with the
virDomainObj a few moments later.
Introduce initial support for domainBlockStats API call that
allow us to query block device statistics. OpenStack nova
uses this API call to query block statistics, alongside
virDomainMemoryStats and virDomainInterfaceStats. Note that
this patch only introduces it for VBD for starters. QDisk
would come in a separate patch series.
A new statistics data structure is introduced to fit common
statistics among others specific to the underlying block
backends. For the VBD statistics on linux these are exported
via sysfs on the path:
"/sys/bus/xen-backend/devices/vbd-<domid>-<devid>/statistics"
To calculate the block devno libxlDiskPathToID is introduced.
Each backend implements its own function to extract statistics,
allowing support for multiple backends and different platforms.
VBD stats are exposed in reqs and number of sectors from
blkback, and it's up to us to convert it to sector sizes.
The sector size is gathered through xenstore in the device
backend entry "physical-sector-size".
BlockStatsFlags variant is also implemented which has the
added benefit of getting the number of flush requests.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
QEMU reports timestamp along with other memory statistics, but this information is not saved into domain statistics.
It could be useful to determine if the data reported is fresh or not.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: Derbyshev Dmitry <dderbyshev@virtuozzo.com>
'memtotal' in virtio drivers and qemu corresponds to 'available' in libvirt.
Because of that, 'stat-available-memory' is renamed into 'usable'.
Balloon statistics are not reported in hrf, so no modifications are made in qemu_monitor_text.c.
Signed-off-by: Derbyshev Dmitry <dderbyshev@virtuozzo.com>
