Introduce tests to verify that the 'ps2' feature is correctly parsed
when given either 'dirty' XML from a user or 'clean' canonical XML,
as produced by libvirt. This also tests the transformation from libvirt's
internal state to the aforementioned canonical form and to a QEMU
command line.
As a bonus, we also test some known bad configurations:
- When user explicitly adds ps2 bus inputs, but also explicitly disables
the 'ps2' feature.
- When user explicitly enables the 'vmport' feature, but also explicitly
disables the 'ps2' feature. This is not supported by QEMU and will
result in vmport device not being created without emitting any warning
or error.
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability tells us whether given QEMU binary supports the
'-machine xxx,i8042=on/off' toggle used to enable/disable PS/2
controller emulation.
A few facts:
- This option was introduced in QEMU 7.0 and defaults to 'on'
- QEMU versions before 7.0 enabled i8042 controller emulation implicitly
- This option (and i8042 controller emulation itself) is only supported
by descendants of the generic PC machine type (e.g. i440fx, q35, etc.)
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Attempting to start qemu with or hotplug an empty 'usb-storage' based
disk results in the following error:
qemu-system-x86_64: -device {"driver":"usb-storage","bus":"usb.0","port":"2","id":"usb-disk1","removable":true}: drive property not set
Reject such config at validation step and adjust tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Some JSON parsers do not like bare types outside of objects or arrays
or do validation of object key uniqueness.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add test cases for few edge cases which excercise the XML reporting from
libxml2 in anticipation of upcoming changes of behaviour.
'virschematest' must skip parsing of the broken file altogether so this
patch adds infrastructure to allow that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patch will result in having the build directory path in some of
the output files. Replace it by a constant 'ABS_SRCDIR' to avoild
breaking tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Latest qemu will be dropping some very old machine types (2.0 - 2.3) and
some of our tests use them. As in none of the cases the test actually
needs given machine type, switch them to 'pc' instead.
In one case 'numavcpus-topology-mismatch' this caused switch to a more
modern syntax for NUMA memory specification, but the test is testing a
different aspect, thus we can modernize this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This excercises the old-style NUMA memory commandline used with 5.0 and
older machine types:
-smp 16,sockets=2,dies=1,clusters=1,cores=4,threads=2 \
-numa node,nodeid=0,cpus=0-7,mem=107 \
-numa node,nodeid=1,cpus=8-15,mem=107 \
in contrast to the modern syntax:
-smp 16,sockets=2,dies=1,clusters=1,cores=4,threads=2 \
-object '{"qom-type":"memory-backend-ram","id":"ram-node0","size":112197632}' \
-numa node,nodeid=0,cpus=0-7,memdev=ram-node0 \
-object '{"qom-type":"memory-backend-ram","id":"ram-node1","size":112197632}' \
-numa node,nodeid=1,cpus=8-15,memdev=ram-node1 \
which is tested by the 'cpu-numa1' test case where this was copied from.
This test is added so that other irrelevant test can be modernized.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add dma-translation attribute to qemu command line if specified in
domain conf.
Signed-off-by: Sandesh Patel <sandesh.patel@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add dma_translation attribute to iommu to enable/disable dma traslation
for intel-iommu
Signed-off-by: Sandesh Patel <sandesh.patel@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace the 'misc-acpi' case by testing a bunch of architectures for how
ACPI is handled including a test for the s390 ACPI strip hack added in
previous commit.
The input files are adapted from the corresponding '-minimal.xml' files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
This reverts commit cf934c87cc.
The matching logic is flawed and it would complicate support of
this command.
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
As can be seen in earlier commits, there can be two OEM strings
with the same index. But since our parser
(virSysinfoParseOEMStrings()) doesn't expect that, it increments
index in each run and thus skips over these strings.
Fortunately, we have the right index at hand - we're just
skipping over it in a loop. Just reconstruct the index back
inside the loop.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Introduce a test case for sysinfotest. The data was obtained by
running dmidecode as libvirt would run it:
dmidecode -q -t 0,1,2,3,4,11,17
Now, the expected output fits almost perfectly, except for OEM
strings where the third string looks nothing like in the
dmidecode output. This is because of testDMIDecodeDryRun() which
overwrites the third OEM string (see v6.5.0-rc1~214 for more
info). But that's okay for now.
Speaking of OEM strings, it's worth noticing two 'OEM Strings'
sections in the dmidecode output. This is causing some troubles
and will be fixed in next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Nothing special going on here.
Resolves: https://issues.redhat.com/browse/RHEL-24746
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The aim of pstore device is to provide a bit of NVRAM storage for
guest kernel to record oops/panic logs just before the it
crashes. Typical usage includes usage in combination with a
watchdog so that the logs can be inspected after the watchdog
rebooted the machine. While Linux kernel (and possibly Windows
too) support many backends, in QEMU there's just 'acpi-erst'
device so stick with that for now. The device must be attached to
a PCI bus and needs two additional values (well, corresponding
memory-backend-file needs them): size and path. Despite using
memory-backend-file this does NOT add any additional RAM to the
guest and thus I've decided to expose it as another device type
instead of memory model.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
New element 'openfiles' had confusing name. Since the patch with
this new element wasn't propagate yet, old name ('rlimit_nofile')
was changed.
...
<binary>
<openfiles max='122333'/>
</binary>
...
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This scenario is going to be ever more popular, especially now
that virt-manager has started using UEFI by default on riscv64
(see https://github.com/virt-manager/virt-manager/pull/670/).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's available as part of the edk2-riscv64 Fedora package.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By definition. Accordingly, filter them out when looking for
a read/write image.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the configuration explicitly requests a specific type of
firmware image, be it pflash or ROM, we should ignore all images
that are not of that type.
If no specific type has been requested, of course, any type is
considered a match and the selection will be based upon the
other attributes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new test case covers the scenario in which the user
specifically asked for a read/write pflash image.
From the output files, we can see that the firmware selection
algorithm has picked a ROM image, which demonstrates the
presence of another bug. We're going to fix it with an upcoming
commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Sync with the edk2-20240524-4.fc39 package from Fedora.
The only notable change is that the inteltdx variant now declares
support for Secure Boot and is a ROM image instead of a stateless
pflash one.
The latter causes it to be considered eligible for the
configuration described by the firmware-auto-efi-rw test cases,
which now passes instead of failing.
Of course that doesn't make any sense, because a ROM image by
definition cannot be read/write. So this indicates the presence
of a bug in our firmware selection algorithm, which we're going
to address with an upcoming commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an element to configure the rlimit nofile size:
...
<binary>
<rlimit_nofile size='122333'/>
</binary>
...
Non-positive values are forbidden in 'domaincommon.rng'. Added separate
test file, created by modifying the 'vhost-user-fs-fd-memory.xml'.
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Run the daemon with --print-capabilities first, to see what it supports.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have a fake virtiofsd json descriptor in our vhost-user
test data, we can remove the explicitly specified binary and our
mocking will ensure this test won't be affected by the host state.
Also remove the locking options, since they were never supported
by the Rust version of virtiofsd.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the capabilities from the latest virtiofsd main branch and adjust
the order in the priority test accordingly.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "modify" command allows to replace an existing record (its
text value). The primary key is the name of the record. If
duplicity or missing record detected, throw error.
Tests in networkxml2xmlupdatetest.c contain replacements of an
existing DNS-text record and failure due to non-existing record.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/639
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "modify" command allows to replace an existing Srv record
(some of its elements respectively: port, priority and weight).
The primary key used to choose the modify record is the remaining
parameters, only one of them is required. Not using some of these
parameters may cause duplicate records and error message. This
logic is there because of the previous implementation (Add and
Delete options) in the function.
Tests in networkxml2xmlupdatetest.c contain replacements of an
existing DNS-Srv record and failure due to non-existing record.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/639
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "modify" command allows you to replace an existing record
(its hostname, sub-elements). IP address acts as the primary key.
If it is not found, the attempt ends with an error message. If
the XML contains a duplicate address, it will select the last
one.
Tests in networkxml2xmlupdatetest.c contain replacements of an
existing DNS-Host record and failure due to non-existing record.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/639
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Similarly to commit 2482801608 we can safely ignore connectionId,
portId and portgroupId in both XML and VMX as they are only a blind
pass-through between XML and VMX and an ethernet without such parameters
was spotted in the wild. On top of that even our documentation says the
whole VMWare Distrubuted Switch configuration is a best-effort.
Resolves: https://issues.redhat.com/browse/RHEL-46099
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
mem_nodes[i].ndistances is written outside the loop causing an out-of-bounds
write leading to heap corruption.
While we are at it, the entire cleanup portion can be removed as it can be
handled in virDomainNumaFree. One instance of VIR_FREE is also removed and
replaced with g_autofree.
This patch also adds a testcase which would be picked up by ASAN, if this
portion regresses.
Fixes: 742494eed8
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Under the test environment, driver->domainEventState is uninitialized. If a
disk gets dropped, it will attempt to queue an event which will cause a
segmentation fault. This crash does not occur during normal use.
This patch moves driver->domainEventState initialization from qemuhotplugtest
to qemuTestDriverInit in testutilsqemu (Credit goes to Michal Privoznik as he
had already provided the diff).
An additional test case is added to test dropping of disks with startupPolicy
set as optional.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current hostdev parsing logic sets rawio or sgio even if the hostdev type
is not 'scsi'. The rawio field in virDomainHostdevSubsysSCSI overlaps with
wwpn field in virDomainHostdevSubsysSCSIVHost, consequently setting a bogus
pointer value such as 0x1 or 0x2 from virDomainHostdevSubsysSCSIVHost's
point of view. This leads to a segmentation fault when it attempts to free
wwpn.
While setting sgio does not appear to crash, it shares the same flawed logic
as setting rawio.
Instead, we ensure these are set only after the hostdev type check succeeds.
This patch also adds two test cases to exercise both scenarios.
Fixes: bdb95b520c
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'hostFips' member of _virQEMUDriver struct is not used
really, due to previous cleanups. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Soon, the minimal version of QEMU is going to be bumped to 5.2.0.
Drop capabilities for older versions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Soon, the minimal version of QEMU is going to be bumped to 5.2.0.
Drop test cases that require older version.
NB, iothreads-disk-virtio-ccw test is removed completely as we
already have plenty of other tests covering the same code paths.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The disk-network-tlsx509-vxhs.xml file will be removed soon. Drop
the test case in qemusecuritytest that relies on it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As I don't have a sparc machine handy add emulated capabilities.
This patch is in preparation for bumping minimum qemu version beyond the
oldest 'sparc' caps we currently have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
