Introduce a new helper function "virDiskNameParse" which extends
virDiskNameToIndex but handling both disk index and partition index.
Also rework virDiskNameToIndex to be based on virDiskNameParse.
A test is also added for this function testing both valid and
invalid disk names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for domainMemoryStats API call, which
consequently enables the use of `virsh dommemstat` command to
query for memory statistics of a domain. We support
the following statistics: balloon info, available and currently
in use. swap-in, swap-out, major-faults, minor-faults require
cooperation of the guest and thus currently not supported.
We build on the data returned from libxl_domain_info and deliver
it in the virDomainMemoryStat format.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The LXC driver uses virSetUIDGID() to become UID/GID 0.
It passes an empty groups list to virSetUIDGID()
to get rid of all supplementary groups from the host side.
But virSetUIDGID() calls setgroups() only if the supplied list
is larger than 0.
This leads to a container root with unrelated supplementary groups.
In most cases this issue is unoticed as libvirtd runs as UID/GID 0
without any supplementary groups.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of creating symlinks, bind mount the devices to
/dev/pts/XY.
Using bind mounts it is no longer needed to add pts devices
to files like /etc/securetty.
Signed-off-by: Richard Weinberger <richard@nod.at>
Userspace does not expect that the initial console
is a controlling TTY. systemd can deal with that, others not.
On sysv init distros getty will fail to spawn a controlling on
/dev/console or /dev/tty1. Which will cause to whole container
to reboot upon ctrl-c.
This patch changes the behavior of libvirt to match the kernel
behavior where the initial TTY is also not controlling.
The only user visible change should be that a container with
bash as PID 1 would complain. But this matches exactly the kernel
be behavior with init=/bin/bash.
To get a controlling TTY for bash just run "setsid /bin/bash".
Signed-off-by: Richard Weinberger <richard@nod.at>
https://bugzilla.redhat.com/show_bug.cgi?id=1251190
So, if domain loses access to storage, sanlock tries to kill it
after some timeout. So far, the default is 80 seconds. But for
some scenarios this might not be enough. We should allow users to
adjust the timeout according to their needs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Adjust the config code so that it does not enforce that target memory
node is specified. To avoid breakage, adjust the qemu memory hotplug
config checker to disallow such config for now.
Since we already make sure before that the domain configuration is
valid we may execute it always at the cost of doing 0 iterations of the
for loop.
This patch will simplify later refactor as it will avoid whitespace
changes.
Make the function usable so that -1 can be passed to it as cell ID so
that we can later enable memory hotplug on non-NUMA guests for certain
architectures.
This patch addresses BZ 1244895.
Adapt the sysfs TPM command cancel path for the TPM driver that
does not use a miscdevice anymore since Linux 4.0. Support old
and new paths and check their availability.
Add a mockup for the test cases to avoid the testing for
availability of the cancel path.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Introduce support for domainGetCPUStats API call and consequently
allow us to use `virsh cpu-stats`. The latter returns a more brief
output than the one provided by`virsh vcpuinfo`.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Current monitor code overrides domain object's privateData, e.g.
in virBhyveProcessStart():
vm->privateData = bhyveMonitorOpen(vm, driver);
where bhyveMonitorPtr() returns bhyveMonitorPtr.
This is not right thing to do, so make bhyveMonitorPtr
a part of the bhyveDomainObjPrivate struct and change related code
accordingly.
https://bugzilla.redhat.com/show_bug.cgi?id=1277781
The virStoragePoolFCRefreshThread had passed a pointer to the pool obj
in the virStoragePoolFCRefreshInfoPtr; however, we cannot assume that
the pool exists still since we don't keep the pool lock throughout
the duration of the thread.
Therefore, instead of passing the pool obj pointer, pass the UUID of
the pool and perform a lookup. If found, then we can perform the
refresh using the locked pool obj pointer; otherwise, we just exit
the thread since the pool is now gone.
Logging current async job while in BeginJob is useful, but the async job
we want to start is even more interesting.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
It's just a copy&paste of qemuxml2argv test anyway. We can test most of
them (except for qemuxmlns-qemu-ns-domain.xml which fails to validate
against our schema) by qemuxml2argv test.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Fixes several style issues and removes "DEF" (what is it supposed to
mean anyway?) from debug messages.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
USB controllers can share the same 'index' which indicates, that there
is some sort of master-companion relationship. Reorder the controllers
in XML in to place the master controller before its companions. This is
required by QEMU to not fail with error message:
error: internal error: process exited while connecting to monitor:
2015-10-26T16:25:17.630265Z qemu-system-x86_64:
-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x6:
USB bus 'usb.0' not found
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1166452
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Adding this feature will allow users to easily attach a hostdev network
interface using PCI passthrough.
The interface can be attached using --type=hostdev and PCI address or
as --source. This command also allows you to tell, whether the interface
should be managed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=997561
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Just straight-forward patch.
Use reference counting for privdom as stats internally could drop domain lock.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The previous commit
commit 4e8993a250
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Nov 9 16:20:08 2015 +0000
qemu: assume various QEMU 0.10 features are always available
Added broken handling of -sdl. Instead of duplicating existing
SDL handling code, just ensure it is invoked in the right
scenarios.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The -sdl and -net ...name=XXX arguments were both introduced
in QEMU 0.10, so the QEMU driver can assume they are always
available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0 the -vga argument was introduced, so the
QEMU driver can assume it is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0 the -drive format= parameter was added,
so the QEMU driver can assume it is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0, the -drive cache option stopped using
the on/off value names, so the QEMU driver can assume
use of the new value names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we require QEMU 0.12.0, we can assume that QEMU supports
all of the fd, tcp, unix and exec migration protocols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We have twice previously attempted to remove Xenner
support
commit de9be0ab4d
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Aug 22 17:29:01 2012 +0100
Remove xenner support
commit 92572c3d71
Author: Ján Tomko <jtomko@redhat.com>
Date: Wed Feb 18 16:33:50 2015 +0100
Remove code handling the QEMU_CAPS_DOMID capability
This change really does remove the last traces of it
in the capabilities handling code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.9.1 the -drive argument can be used to configure
all disks, so the QEMU driver can assume it is always available
and drop support for -hda/-cdrom/etc.
Many of the tests need updating because a great many were
running without CAPS_DRIVE set, so using the -hda legacy
syntax.
Fixing the tests uncovered a bug in the argv -> xml
convertor which failed to handle disk with if=floppy.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QEMU argv -> virDomainDef conversion code was not handling
-drive arguments using the floppy bus. This caused them to be
added as hard disks instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The -no-reboot arg was added in QEMU 0.9.0, so the QEMU driver
can now assume it is always present.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>