The post parse callback is part of the real (non-test) processing flow.
This commit adds it (for disks) to the qemublocktest flow as well.
Specifically, this will be needed for tests that use luks encryption,
so that the default encryption engine (which is added in an upcoming commit)
will be overridden by qemu.
Signed-off-by: Or Ozeri <oro@il.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'effectiveBootIndex' is a copy of 'bootIndex' if '<boot order=' was
present and left unassigned if not. This allows hypervisor drivers to
reinterpret <os><boot> without being visible in the XML.
QEMU driver had a internal implementation for disks, which is now
replaced. Additionally this will simplify a refactor of network boot
assignment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit 801e6da29c
They are not needed anymore.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Intended as a replacement for qemuVirtioFSCreateSocketFilename,
to be used outside of qemu_virtiofs.c
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As advertised in previous commit, this event is delivered to us
when virtio-mem module changes the allocation inside the guest.
It comes with one attribute - size - which holds the new size of
the virtio-mem (well, allocated size), in bytes.
Mind you, this is not necessarily the same number as 'requested
size'. It almost certainly will be when sizing the memory up, but
it might not be when sizing the memory down - the guest kernel
might be unable to free some blocks.
This current size is reported in the domain XML as an output
element only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we've removed support for plaintext secrets qemuDomainSecretInfo
can be simplified by removing the 'type' field and merging in all the
fields from 'qemuDomainSecretAES'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no code which could set it any more so we can remove the
generators.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The answer is now always 'true', so we can remove the function and
simplify the logic in places where it's called.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
LUN disks are supported only by VMX and QEMU drivers and the VMX
implementation is a subset of qemu's implementation, thus we can move
the qemu-specific validator to the global validation code providing that
we allow the format to be 'none' (qemu driver always sets 'raw' if it's
not set) and allow disk type 'volume' as a source (qemu always
translates the source, and VMX doesn't implement 'volume' at all).
Moving the code to the global validation allows us to stop calling it
from the qemu specific validation and also deduplicates the checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Directly use 'priv->allowReboot' as we now document what the behaiour is
to avoid another lookup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Save further readers the headache of determining what it actually does
and note that it's not used with qemu version supporting the
'set-action' command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Again, we don't need full driver, just its config.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
The function doesn't really need domain object, but domain
definition from which it takes seclabels.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
We always process the full list so there's no value in storing the count
separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We always process the full list so there's no value in storing the count
separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously they were stored in two separate arrays. This way it's
obvious when referencing the same one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For validation of explicitly configured addresses we already ported the
same style of checks to qemuValidateDomainDeviceDefAddress and implicit
address assignment should do the right thing in the first place, thus
the function is redundant and can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function doesn't modify passed video definition. Make the
argument const.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In preparation for hotplug of <transient> disks we'll need to track
whether the overlay file was created individually per-disk.
Add 'transientOverlayCreated' to 'struct _qemuDomainDiskPrivate' and
remove 'inhibitDiskTransientDelete' from 'qemuDomainObjPrivate' and
adjust the code for the change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The logic assigning the bootindices from the legacy boot order
configuration was spread through the command line formatters for the
disk device and for the floppy controller.
This patch adds 'effectiveBootindex' property to the disk private data
which holds the calculated boot index and moves the logic of determining
the boot index into 'qemuProcessPrepareDomainDiskBootorder' called from
'qemuProcessPrepareDomainStorage'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Similar to the qemu.conf knob 'deprecation_behavior' add a per-VM knob
in the QEMU namespace:
<qemu:deprecation behavior='...'/>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add status XML infrastructure for storing a list of block dirty bitmaps
which are temporarily used when migrating a VM with
VIR_MIGRATE_NON_SHARED_DISK for cleanup after a libvirtd restart during
migration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The conversion removes the use of virStringListAdd/virStringListRemove
which try to add dynamic properties to a string list which is really
inefficient.
Storing the dbus VMState ids in a GSList is pretty straightforward and
the slightly increased complexity of the code will be paid back by
removing the string list helpers later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Nodename may be asociated to a disk backup job, add support to looking
up in that chain too. This is specifically useful for the
BLOCK_WRITE_THRESHOLD event which can be registered for any nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Nodename may be asociated to a disk backup job, add support to looking
up in that chain too. This is specifically useful for the
BLOCK_WRITE_THRESHOLD event which can be registered for any nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanup the @qemuCaps argument in
qemuDomainDefValidateMemoryHotplug() is unused and thus doesn't
need to be passed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In some cases such as when creating an internal inactive snapshot we
know that the domain definition in the snapshot is equivalent to the
current definition. Additionally we set up the current definition for
the snapshotting but not the one contained in the snapshot. Thus in some
cases the caller knows better which def to use.
Make qemuDomainSnapshotForEachQcow2 take the definition by the caller
and copy the logic for selecting the definition to callers where we
don't know for sure that the above claim applies.
This fixes internal inactive snapshots when <disk type='volume'> is used
as we translate the pool/vol combo only in the current def.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/97
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The NCR53C90 ESP SCSI controller is only usable when built-in to the
machine type. This method will facilitate checking that restriction
across many places.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch also changes functionality a bit.
First if unlinking of old config file is failed we rollback and return error
previously and now we return success. I don't think this makes much difference.
I guess in both cases on libvirtd restart we have to deal with both new and old
config existing on disk with different names but same uuid.
Second if unlinking of old autolink is failed we rollback previously which
was not right as at this point we already unlink old config file. So this
is fixed now.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Don't hide our use of GHashTable behind our typedef. This will also
promote the use of glibs hash function directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
All users of virHashTable pass strings as the name/key of the entry.
Make this an official requirement by turning the variables to 'const
char *'.
For any other case it's better to use glib's GHashTable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
By default, pfifo_fast queueing discipline (qdisc) is set on
newly created interfaces (including TAPs). This qdisc has three
queues and packets that want to be sent through given NIC are
placed into one of the queues based on TOS field. Queues are then
emptied based on their priority allowing interactive sessions
stay interactive whilst something else is downloading a large
file.
Obviously, this means that kernel has to be involved and some
locking has to happen (when placing packets into queues). If
virtualization is taken into account then the above algorithm
happens twice - once in the guest and the second time in the
host.
This is arguably not optimal as it burns host CPU cycles
needlessly. Guest already made it choice and sent packets in the
order it wants.
To resolve this, Linux kernel offers 'noqueue' qdisc which can be
applied on virtual interfaces and in fact for 'lo' it is by
default:
lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
Set it for other TAP devices we create for domains too. With this
change I was able to squeeze 1Mbps more from a macvtap attached
to a guest and to my 1Gbps LAN (as measured by iperf3).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329644
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Later patches will implement support for <transient/> disks in libvirt
by installing an overlay on top of the configured image. This will
require cleanup after the VM will be stopped so that the state is
correctly discarded.
Since the overlay will be installed only during the startup phase of the
VM we need to ensure that qemuProcessStop doesn't delete the original
file on some previous failure. This is solved by adding
'inhibitDiskTransientDelete' VM private data member which is set prior
to any startup step and will be cleared once transient disk overlays are
established.
Based on that we can then delete the overlays for any <transient/> disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
In [1], changes were made to remove the existing auto-alignment
for pSeries NVDIMM devices. That design promotes strange situations
where the NVDIMM size reported in the domain XML is different
from what QEMU is actually using. We removed the auto-alignment
and relied on standard size validation.
However, this goes against Libvirt design philosophy of not
tampering with existing guest behavior, as pointed out by Daniel
in [2]. Since we can't know for sure whether there are guests that
are relying on the auto-alignment feature to work, the changes
made in [1] are a direct violation of this rule.
This patch reverts [1] entirely, re-enabling auto-alignment for
pSeries NVDIMM as it was before. Changes will be made to ease
the limitations of this design without hurting existing
guests.
This reverts the following commits:
- commit 2d93cbdea9
Revert "formatdomain.html.in: mention pSeries NVDIMM 'align down' mechanic"
- commit 0ee56369c8
qemu_domain.c: change qemuDomainMemoryDeviceAlignSize() return type
- commit 07de813924
qemu_domain.c: do not auto-align ppc64 NVDIMMs
- commit 0ccceaa57c
qemu_validate.c: add pSeries NVDIMM size alignment validation
- commit 4fa2202d88
qemu_domain.c: make qemuDomainGetMemorySizeAlignment() public
[1] https://www.redhat.com/archives/libvir-list/2020-July/msg02010.html
[2] https://www.redhat.com/archives/libvir-list/2020-September/msg00572.html
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The function is no longer used once we setup per-hostdev data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically we've prepared secrets for all objects in one place. This
doesn't make much sense and it's semantically more appealing to prepare
everything for a single device type in one place.
Move the setup of the (iSCSI|SCSI) hostdev secrets into a new function
which will be used to setup other things as well in the future.
This is a similar approach we do for disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the recent changes, this function is now always returning
zero. Turn it to 'void' to relieve callers from checking it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Next patch will use it outside of qemu_domain.c.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 4362068979 moved the function to
util/virqemu.c which is compiled also on win32 and geteuid()/getegid()
doesn't exist there.
Move it to qemu_domain.c which is compiled only when the qemu driver is
enabled. Originally I didn't want to put it here as qemu_domain.c is a
code dump for helper functions but this is the least invasive fix.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Move the code to qemu_domain.c so that it can be reused in other parts
of the qemu driver. 'qemu_domain' was chosen as we check the domain
state after closing the wrapper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the code to qemu_domain.c so that it can be reused in other parts
of the qemu driver. 'qemu_domain' was chosen as the permissions are
based on the domain configuration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Functions `qemuDomainRemoveInactiveJob` and
`qemuDomainRemoveInactiveJobLocked` had their declaration misplaced in
`qemu_domainjob` and were moved to `qemu_domain` where their definitions
reside.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The qemu_domain.c file is big as is and we should split it into
separate semantic blocks. Start with code that handles domain
namespaces.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
