Instead of updating defined mdevs only add another update for active
devices as well to cover transient mdev devices as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2143158
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The parameter was added for consistency with virPidFileAcquirePath.
However, all callers of virPidFileAcquire pass false.
Remove the argument.
Partially-reverts: 2250a2b5d2
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Certain udev entries might be of a size that makes libudev emit EINVAL
which right now leads to udevEventHandleThread exiting. Due to no more
handling events other elements of libvirt will start pushing for events
to be consumed which never happens causing a busy loop burning a cpu
without any gain.
After evaluation of the example case discussed in in #245 and a test
run ignoring EINVAL it was considered safe to add EINVAL to the ignored
errnos to not exit udevEventHandleThread giving it more resilience.
The root cause is in systemd and by now was discussed and fixed via
https://github.com/systemd/systemd/issues/24987, but hardening libvirt
to be able to better deal with EINVAL returned still is the right thing
to avoid the reported busy loops on systemd with older systemd versions.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/245
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow callers to request XML validation against the schema. All callers
for now pass 'false'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The node_device_driver.h declares nodeDeviceLock() and
nodeDeviceUnlock() functions which used to exist, but after
rework to automatic mutex management they exist no more. Their
last use was removed in v8.1.0-rc1~122.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Currently, udevNodeRegister() is forward declared in
node_device_driver.h even though the function is implemented in
node_device_udev.c which warrants node_device_udev.h header file.
Move the declaration into the correct file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Nothing in the header file requires the include of libudev.h, as
the former header file is now empty.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The DMI_DEVPATH macro is used exclusively within
node_device_udev.c. There's no need to expose it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The SYSFS_DATA_SIZE macro is Unused since its introduction in
v0.7.3~48. Sorry Dave.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Replace the thin wrappers virNodeDeviceDefParseString/File by directly
calling the main parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patch which is fixing the opening of drivers in monolithic mode
needs to know whether we are inside 'libvirtd' but the code where the
decision needs to happen is not re-compiled per daemon. Thus we need to
pass this information to the stateful driver init function so that it
can be remebered.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Openstack developers reported that newly-created mdevs were not
recognized by libvirt until after a libvirt daemon restart. The source
of the problem appears to be that when libvirt gets the udev 'add'
event, the sysfs tree for that device might not be ready and so libvirt
waits 100ms for it to appear (max 100 waits of 1ms each). But in the
OpenStack environment, the sysfs tree for new mediated devices was
taking closer to 250ms to appear and therefore libvirt gave up waiting
and didn't add these new devices to its list of nodedevs.
By changing the wait time to 1 second (max 100 waits of 10ms each), this
should provide enough time to enable these deployments to recognize
newly-created mediated devices, but it shouldn't increase the delay for
more traditional deployments too much.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2109450
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
It would be nice to be able to test the mediated device capabilities
without having physical hardware which supports it. The 'mtty' kernel
module presents a virtual parent device which is capable of creating
'fake' mediated devices, and as such it would be useful for testing.
However, the 'mtty' device is not part of an existing device subsystem
(e.g. PCI, etc), so libvirt ignores it and it does not get added to the
node device list. And because it does not get added to the node device
list, it cannot be used to create child mdevs using `virsh
nodedev-create`.
There is already a node device type capability
VIR_NODE_DEV_CAP_MDEV_TYPES that indicates whether a device supports
creating child mediated devices, but libvirt assumes that this is a
nested capability (in other words, it assumes that the primary
capability of a device is something like PCI). If we allow this
MDEV_TYPES capability to be a primary device capability, then we can
support virtual devices like 'mtty' as a parent for mediated devices.
See https://bugzilla.redhat.com/show_bug.cgi?id=2107031
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As "none" is a legal value represented in the sysfs attribute dev_busid
this patch prevents libvirt from incorrectly reporting an internal error.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Suggested-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the new introduced sysfs attribute dev_busid which provides the address
of the device in the subchannel independent from the bound device driver.
It is added if available in the sysfs as optional channel_dev_addr element into
the css device capabilty providing the ccw deivce address attributes cssid,
ssid and devno.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add virCCWDeviceAddressParseFromString and use it in nodedev udev.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move virDomainCCWAddressAsString into virccw and rename method as
virCCWDeviceAddressAsString.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor ccw data structure virDomainDeviceCCWAddress into util virccw.h
and rename it as virCCWDeviceAddress.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When nodedev objects are added and removed if possible check if mdev-types is
supported by the object and trigger a mdev device definition update to correct
the associated parent nodedevs.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The parent of the mdev definition can change due to the existance of the
parent device. The parents existance can e.g. depend on the device
driver load state.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
There are few places where a virPCIDeviceAddress typed variable
is allocated on the stack but it's not initialized. This can lead
to random values of its members which in turn can lead to a
random behaviour.
Generated with help of the following spatch:
@@
identifier I;
@@
- virPCIDeviceAddress I;
+ virPCIDeviceAddress I = { 0 };
And then fixing bhyveAssignDevicePCISlots() which does declare
the variable and then explicitly zero it by calling memset() only
to set a specific member afterwards.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We recently started listing these in the spec file and, since we
were not creating them during the installation phase, that broke
RPM builds.
Fixes: 4b43da0bff
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The service files were copied out of the service file for libvirtd and
the name of the corresponding manpage was not fixed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2045959
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Unfortunately, udev doesn't set ID_TYPE attribute for NVMe disks,
therefore we have to add another case into udevKludgeStorageType()
to treat /dev/nvme* devlinks as any other disk.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2045953
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The udevKludgeStorageType() function looks at devlink name
(/dev/XXX) and guesses the type of the (storage) device using a
series of STRPREFIX() calls. Well those can be turn into an array
and a for() loop, especially if we are about to add a new case
(in the next commit).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
sysconfig files are owned by the admin of the host. They have the
liberty to put anything they want into these files. This makes it
difficult to provide different built-in defaults.
Remove the sysconfig file and place the current desired default into
the service file.
Local customizations can now go either into /etc/sysconfig/name
or /etc/systemd/system/name.service.d/my-knobs.conf
Attempt to handle upgrades in libvirt.spec.
Dirty files which are marked as %config will be renamed to file.rpmsave.
To restore them automatically, move stale .rpmsave files away, and
catch any new rpmsave files in %posttrans.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
One of the paths returned -1 directly without going through the cleanup
section.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
* XML serialization and deserialization of PCI VPD;
* PCI VPD capability flags added and used in relevant places;
* XML to XML tests for the added capability.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Implement these new API functions in the nodedev driver.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since UUID is not guaranteed to be unique by mdevctl, we may have more
than one nodedev with the same UUID. Therefore, we need to disambiguate
when looking up mdevs by specifying the UUID and parent address, which
mdevctl guarantees to be a unique combination.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unfortunately, mdevctl supports defining more than one mdev with the
same UUID as long as they have different parent devices. (Only one of
these devices can be active at any given time).
This means that we can't use the UUID alone as a way to uniquely
identify mdev node devices. Append the parent address to ensure
uniqueness. For example:
Before: mdev_88a6b868_46bd_4015_8e5b_26107f82da38
After: mdev_88a6b868_46bd_4015_8e5b_26107f82da38_0000_00_02_0
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1979440
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This can be used similarly to other postparse callbacks in libvirt --
filling in additional information that can be determined by using the
information provided in the XML. In this case, we determine the address
of the parent device and cache it in the mdev caps so that we can use it
for generating a unique name and interacting with mdevctl.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
At the moment, this is only for mediated devices. When a new mediated
device is created or defined, the xml is expected specify the nodedev
name of an existing device as its parent. We were not previously
validating this and were simply accepting any string here.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
mdevctl can report multiple defined devices with the same UUID
but different parents, including parents that don't actually exist on
the host machine. Libvirt sets the parent to the 'computer' device for
all of the mdevs that have nonexistent parents. Because of this, it's
possible that there are multiple devices with the same UUID and the same
'computer' device as their parent, so the combination of uuid and parent
nodedev name is not guaranteed to be a unique name.
We need to ensure that each nodedev has a unique name. If we can't use
the UUID as a unique nodedev name, and we can't use the combination of
UUID and nodedev parent name, we need to find another solution. By
caching and using the parent name reported by mdevctl in combination
with the UUID, we can achieve a unique name. mdevctl guarantees that its
uuid/parent combination is unique.
This value will be used to set the mdev nodedev name in a following commit.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 51fbbfdce8 attempted to get the proper nodedev name for the
parent of an defined mdev by traversing the filesystem and looking for a
device that had the appropriate sysfs path. This works, but it would be
cleaner to to avoid mucking around in the filesystem and instead just
just examine the list of devices we have in memory.
We already had a function nodeDeviceFindAddressByName() which constructs
an address for parent device in a format that can be used with mdevctl.
So if we refactor this function into a a function that simply formats an
address for an arbitrary virNodeDeviceObj*, then we can use this
function as a predicate for our new virNodeDeviceObjListFind() function
from the previous commit. This will search our list of devices for one
whose address matches the address we get from mdevctl.
One nice benefit of this approach is that our test cases will now
display xml output with the proper parent name for mdevs (assuming that
we've added the appropriate mock parent devices to the test driver).
Previously they just displayed 'computer' for the parent because the
alternative would have required specially constructing a mock filesystem
environment with a sysfs that mapped to the appropriate parent.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit e9b534905f introduced an error when parsing an empty list
returned from mdevctl.
This occurs e.g. if nodedev-undefine is used to undefine the last
defined mdev which causes the following error messages
libvirtd[33143]: internal error: Unexpected format for mdevctl response
libvirtd[33143]: internal error: failed to query mdevs from mdevctl:
libvirtd[33143]: mdevctl failed to updated mediated devices
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Inactive mdevs were simply formatting their parent name as the value
received from mdevctl rather than looking up the libvirt nodedev name of
the parent device. This resulted in a parent value of e.g.
'0000:5b:00.0' instead of 'pci_0000_5b_00_0'. This prevented defining a
new mdev device from the output of nodedev-dumpxml.
Unfortunately, it's not simple to fix this comprehensively due to the
fact that mdevctl supports defining (inactive) mdevs for parent devices
that do not actually exist on the host (yet). So for those persistent
mdev definitions that do not have a valid parent in the device list, the
parent device will be set to the root "computer" device.
Unfortunately, because the value of the 'parent' field now depends on
the configuration of the host, the mdevctl parsing test will output
'computer' for all test devices. Fixing this would require a more
extensive mock test environment.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1979761
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When trying to destroy a node device that is not active, we end up with
a confusing error message:
# nodedev-destroy mdev_88a6b868_46bd_4015_8e5b_26107f82da38
error: Failed to destroy node device 'mdev_88a6b868_46bd_4015_8e5b_26107f82da38'
error: failed to access '/sys/bus/mdev/devices/88a6b868-46bd-4015-8e5b-26107f82da38/iommu_group': No such file or directory
With this patch, the error is more clear:
# nodedev-destroy mdev_88a6b868_46bd_4015_8e5b_26107f82da38
error: Failed to destroy node device 'mdev_88a6b868_46bd_4015_8e5b_26107f82da38'
error: Requested operation is not valid: Device 'mdev_88a6b868_46bd_4015_8e5b_26107f82da38' is not active
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Currently, we have three different types of mdevctl errors:
1. the command cannot be constructed ecause of unsatisfied
preconditions
2. the command cannot be executed due to some error
3. the command is executed, but returns an error status
These different failures are handled differently. Some cases set an
error and return and error status, and some return a error message but
do not set an error.
This means that the caller has to check both whether the return value is
negative and whether the errmsg parameter is non-NULL before deciding
whether to report the error or not. The situation is further complicated
by the fact that there are occasional instances where mdevctl exits with
an error status but does not print an error message. This results in
errmsg being an empty string "" (i.e. non-NULL).
Simplify the situation by ensuring that virReportError() is called for
all error conditions rather than returning an error message back to the
calling function.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
This macro will be utilized in the following patch. Since mdevctl
commands can fail with or without an error message, this macro makes it
easy to print a fallback error in the case that the error message is not
set.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
