Down the road, I want to add virDomainSnapshotGetParent, and use
the new API rather than xml scraping; but this virsh command can
be implemented even without the new API.
* tools/virsh.c (cmdSnapshotParent): New command.
* tools/virsh.pod (snapshot-parent): Document it.
Sometimes, full XML is too much; since most snapshot commands
operate on a snapshot name, there should be an easy way to get
at the current snapshot's name. For example:
virsh snapshot-revert dom `virsh snapshot-current dom --name`
* tools/virsh.c (cmdSnapshotCurrent): Add an option.
* tools/virsh.pod (snapshot-current): Document it.
This commands don't have a --pool option, so don't tell
vshCommandOptVolBy that there could be one. This made
vshCommandOptString for pooloptname fail and an "missing option"
error was reported.
Make pooloptname optional for vshCommandOptVolBy.
Gettext annoyingly modifies CPPFLAGS in-place, putting
-I/usr/local/include into the search patch if libintl headers
must be used from that location. But since we must support
automake 1.9.6 which lacks AM_CPPFLAGS, and since CPPFLAGS is used
prior to INCLUDES, this means that the build picks up the _old_
installed libvirt.h in priority to the in-tree version, leading
to all sorts of weird build failures on FreeBSD.
Fix this by teaching configure to undo gettext's actions, but
to keep any changes required by gettext at the end of INCLUDES
after all in-tree locations are used first. Also requires
adding a wrapper Makefile.am and making gnulib-tool create
just gnulib.mk files during the bootstrap process.
Signed-off-by: Eric Blake <eblake@redhat.com>
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.
* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
* tools/virsh.c: fix missing zero value judgement in cmdBlkiotune and correct
vshError information.
when weight is equal to 0, the cmdBlkiotune will not raise any error information
when judge weight value first time, and execute else branch to judge weight
value again, strncpy(temp->field, VIR_DOMAIN_BLKIO_WEIGHT, sizeof(temp->field))
will be not executed for ever. However, if and only if param->field is equal
to VIR_DOMAIN_BLKIO_WEIGHT, underlying qemuDomainSetBlkioParameters function
will check whether weight value is in range [100, 1000].
* how to reproduce?
% virsh blkiotune ${guestname} --weight 0
Signed-off-by: Alex Jia <ajia@redhat.com>
* tools/virsh.c: avoid memory leak in cmdVolPath.
* src/libvirt.c: Add doc for virStorageVolGetPath to tell one
must free() the returned path after use.
* how to reproduce?
% dd if=/dev/zero of=/var/lib/libvirt/images/foo.img count=1 bs=10M
% virsh pool-refresh default
% valgrind -v --leak-check=full virsh vol-path --vol \
/var/lib/libvirt/images/foo.img
* actual results:
Detected in valgrind run:
==16436== 32 bytes in 1 blocks are definitely lost in loss record 7 of 22
==16436== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==16436== by 0x386A314B3D: xdr_string (in /lib64/libc-2.12.so)
==16436== by 0x3DF8CD770D: xdr_remote_nonnull_string (remote_protocol.c:3
==16436== by 0x3DF8CD7EC8: xdr_remote_storage_vol_get_path_ret
% virsh pool-refresh default
% valgrind -v --leak-check=full virsh vol-path --vol \
/var/lib/libvirt/images/foo.img
Signed-off-by: Alex Jia <ajia@redhat.com>
The description of the list command seemed to suggest that it could
take a set of domains as an argument, which is not correct in the
current HEAD. If virsh list is intended to take a list of domains,
then this patch should be NAK'd and a bug opened against virsh list.
Reported by hachi on #virt
v2:
Change language to include transient domains
Osier pointed out that transient domains are not defined, so what I
had originally proposed wasn't quite correct.
Rename the existing --current flag to the new name --active,
while adding a new flag --current to expose the new
VIR_DOMAIN_AFFECT_CURRENT flag of virDomainGetVcpusFlags.
For backwards compability, the output does not change (even
though the label "current" no longer matches the spelling of
the option that would trigger that number in isolation), and
we accept "--current --live" as an undocumented synonym for
"--active --live" to avoid breaking any existing clients.
* tools/virsh.c (cmdVcpucount): Add --active flag, and rearrange
existing flag handling to expose VIR_DOMAIN_AFFECT_CURRENT support.
* tools/virsh.pod (vcpucount): Document this.
Define two new virsh commands:
* blockpull: Initiate a blockPull for the given disk
* blockjob: Retrieve progress info, modify speed, and cancel active block jobs
Share print_job_progress() with the migration code.
* tools/virsh.c: implement the new commands
Now you can edit a saved state file even if you forgot to grab
a dumpxml file prior to saving a domain. Plus, in-place editing
feels so much nicer.
* tools/virsh.c (cmdSaveImageDumpxml, cmdSaveImageDefine)
(cmdSaveImageEdit): New commands.
* tools/virsh.pod (save-image-dumpxml, save-image-define)
(save-image-edit): Document them.
libvirt-guests is a perfect use case for bypassing the file system
cache - lots of filesystem traffic done at system shutdown, where
caching is pointless, and startup, where reading large files only
once just gets in the way. Make this a configurable option in the
init script, but defaulting to existing behavior.
* tools/libvirt-guests.sysconf (BYPASS_CACHE): New variable.
* tools/libvirt-guests.init.sh (start, suspend_guest): Use it.
Also, migrate was missing documentation for the --xml option
added in commit ec5301cb.
* tools/virsh.c (cmdSave, cmdRestore): Add xml argument.
* tools/virsh.pod (save, restore, migrate): Document it.
Wire up the new flag to several virsh commands. Also, the
'dump' command had undocumented flags.
* tools/virsh.c (cmdSave, cmdManagedSave, cmdDump, cmdStart)
(cmdRestore): Add new flag.
* tools/virsh.pod (save, managedsave, dump, start, restore):
Document flags.
If the domain has managed save image, and --managed-save is
not specified, then it fails with an error telling the user
that a managed save image still exists.
If the domain has managed save image, and --managed-save is
specified, it invokes virDomainUndefineFlags. If
virDomainUndefineFlags fails, then it tries to remove the managed
save image using virDomainManagedSaveRemove first, with
invoking virDomainUndefine following. (For compatibility between
new virsh with this patch and older libvirt without this patch).
Similarly if the domain has no managed save image. See the codes for
detail.
NOTE: Have not removing the codes checking if the domain is running
in function "cmdUndefine", it will go along with qemu driver's fix
(allow to undefine a running domain).
* tools/virsh.c: new column "Managed save" for "cmdDominfo".
* tools/virsh.pod: Update document of "managedsave" to tell one can
use "dominfo" to query whether a domain has any managed save image.
We can make the virsh migrate UI friendlier by supplying the
missing bit automatically instead of erroring out when requesting
--tunnelled without --p2p.
* tools/virsh.c (doMigrate): Make --p2p optional when using
--tunnelled.
* tools/virsh.pod (migrate): Tweak wording accordingly.
* tools/virsh.c: avoid double free of domain, when weight value of blkiotune
less than 0, codes will free domain and jump to cleanup section, however,
cleanup will free domain again.
Detected in valgrind run:
==21297== ERROR SUMMARY: 20 errors from 20 contexts (suppressed: 69 from 8)
==21297==
==21297== 1 errors in context 1 of 20:
==21297== Invalid read of size 4
==21297== at 0x40E209B: virDomainFree (libvirt.c:2096)
==21297== by 0x8065274: cmdBlkiotune (virsh.c:3695)
==21297== by 0x8054CC1: vshCommandRun (virsh.c:13135)
==21297== by 0x806B967: main (virsh.c:14487)
==21297== Address 0x446ad48 is 0 bytes inside a block of size 36 free'd
==21297== at 0x4005B0A: free (vg_replace_malloc.c:325)
==21297== by 0x406814D: virFree (memory.c:310)
==21297== by 0x40D6635: virReleaseDomain (datatypes.c:243)
==21297== by 0x40D6C5E: virUnrefDomain (datatypes.c:280)
==21297== by 0x40E20B9: virDomainFree (libvirt.c:2101)
==21297== by 0x8065297: cmdBlkiotune (virsh.c:3613)
==21297== by 0x8054CC1: vshCommandRun (virsh.c:13135)
==21297== by 0x806B967: main (virsh.c:14487)
==21297==
==21297==
==21297== 1 errors in context 2 of 20:
==21297== Invalid read of size 4
==21297== at 0x40E1FE6: virDomainFree (libvirt.c:2092)
==21297== by 0x8065274: cmdBlkiotune (virsh.c:3695)
==21297== by 0x8054CC1: vshCommandRun (virsh.c:13135)
==21297== by 0x806B967: main (virsh.c:14487)
==21297== Address 0x446ad48 is 0 bytes inside a block of size 36 free'd
==21297== at 0x4005B0A: free (vg_replace_malloc.c:325)
==21297== by 0x406814D: virFree (memory.c:310)
==21297== by 0x40D6635: virReleaseDomain (datatypes.c:243)
==21297== by 0x40D6C5E: virUnrefDomain (datatypes.c:280)
==21297== by 0x40E20B9: virDomainFree (libvirt.c:2101)
==21297== by 0x8065297: cmdBlkiotune (virsh.c:3613)
==21297== by 0x8054CC1: vshCommandRun (virsh.c:13135)
==21297== by 0x806B967: main (virsh.c:14487)
* how to reproduce?
% valgrind -v --leak-check=full virsh blkiotune guestname --weight -1
"optional" is not a very good meta-syntactic construct in our man
page. I scrubbed this, and additionally improved some documentation
on mutually exclusive options. For example,
[[--live] [--config] | [--current]]
implies a set of optional flags, where within the set you can have
either --current or a choice of 0, 1, or both --live and --config.
* tools/virsh.pod: Use "[name]" rather than "optional name" for
optional arguments.
The documentation for vshCommandOptString claims that it returns
-1 on a missing required argument, but in reality, that error
message was unreachable (it was buried inside an if clause that
is true only if the argument was present). The code was so hairy
that I decided a rewrite would make it easier to understand,
and actually return the error values we want.
Meanwhile, our construction guarantees that all vshCmdOpt have
a non-null def member, so there are some redundant checks that
can be trimmed.
* tools/virsh.c (vshCommandOpt): Alter signature.
(vshCommandOptInt, vshCommandOptUInt, vshCommandOptUL)
(vshCommandOptString, vshCommandOptLongLong)
(vshCommandOptULongLong, vshCommandOptBool): Adjust all callers.
(vshCommandOptArgv): Remove dead condition.
This adds four options for virsh command attach-disk.
--cache option allows user to specify cache mode of disk device
from virsh command line when attaching a disk device.
--serial option allows user to specify serial string of disk device
from virsh command line when attaching a disk device.
--shareable option allows user to specify whether the disk device is
shareable between domains when attaching a disk device from virsh
command line.
--address option allows user to specify address of disk device when
attaching a disk device.
This patch adds the --current option to "virsh setvcpus"
command. Currently "virsh setvcpus" command supports
"--live" and "--config" , but "--current" option.
From view of consistency, it's reasonable to support
"--current" option too.
When --current is specified, it affects a "current"
domain.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Valid loglevel range for virsh is 0-4. Update virsh man page
accordingly. Also explain virsh ENV variables and values.
Signed-off-by: Supriya Kannery <supriyak@in.ibm.com>
The last patch breaks make check for two reasons. First, it reverses the
condition but leaves default level unchanged, so instead of not printing
anything but errors before the patch it now prints all debug messages by
default. Second, you forgot to change -d5 option passed to virsh in
tests/virsh-optparse to -d0; the script wants to see all debug messages.
Aligning loglevel values of virsh to that of libvirt.
"DEBUG"=0 loglevel, when specified through commandline or
env variable, should log all the messages. "ERROR=4"
should log only error messages.
Signed-off-by: Supriya Kannery <supriyak@in.ibm.com>
Destroy has a rather negative English connotation. Try to reduce
the impact, so newbies aren't as scared to use it.
* tools/virsh.c: Tweak all destroy documentation.
* tools/virsh.pod: Likewise.
Detected by Coverity. info.nrVirtCpu is unsigned short, but if
cpumaplen is int, then the product of the two in vshMalloc risks
unintended sign extension. cmdVcpuinfo had already solved this
by using size_t cpumaplen.
* tools/virsh.c (cmdVcpuPin): Use correct type.
virt-sanlock-cleanup.8 has static contents (no dependency on
configure), but is generated by pod2man (a perl dependency that
maintainers must have, but which ordinary tarball users need
not have). Therefore, ensure that it is always part of the
tarball, even though it is only conditionally installed.
This is similar to commit 6db98a2d4b, but made simpler by the fact
that the .8 page is static content.
* tools/Makefile.am (EXTRA_DIST): Add virt-sanlock-cleanup.8.
The current sanlock plugin requires a central management
application to manually add <lease> elements to each guest,
to protect resources that are assigned to it (eg writable
disks). This makes the sanlock plugin useless for usage
in more ad hoc deployment environments where there is no
central authority to associate disks with leases.
This patch adds a mode where the sanlock plugin will
automatically create leases for each assigned read-write
disk, using a md5 checksum of the fully qualified disk
path. This can work pretty well if guests are using
stable disk paths for block devices eg /dev/disk/by-path/XXXX
symlinks, or if all hosts have NFS volumes mounted in
a consistent pattern.
The plugin will create one lockspace for managing disks
with filename /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__.
For each VM disks, there will be another file to hold
a lease /var/lib/libvirt/sanlock/5903e5d25e087e60a20fe4566fab41fd
Each VM disk lease is usually 1 MB in size. The script
virt-sanlock-cleanup should be run periodically to remove
unused lease files from the lockspace directory.
To make use of this capability the admin will need to do
several tasks:
- Mount an NFS volume (or other shared filesystem)
on /var/lib/libvirt/sanlock
- Configure 'host_id' in /etc/libvirt/qemu-sanlock.conf
with a unique value for each host with the same NFS
mount
- Toggle the 'auto_disk_leases' parameter in qemu-sanlock.conf
Technically the first step can be skipped, in which case
sanlock will only protect against 2 vms on the same host
using the same disk (or the same VM being started twice
due to error by libvirt).
* src/locking/libvirt_sanlock.aug,
src/locking/sanlock.conf,
src/locking/test_libvirt_sanlock.aug: Add config params
for configuring auto lease setup
* libvirt.spec.in: Add virt-sanlock-cleanup program, man
page
* tools/virt-sanlock-cleanup.in: Script to purge unused
disk resource lease files
We already have a public virDomainPinVcpu, which implies that
Pin and Vcpu are treated as separate words. Unreleased commit
e261987c introduced virDomainGetVcpupinInfo as the first public
API that used Vcpupin, although we had prior internal uses of
that spelling. For consistency, change the spelling to be two
words everywhere, regardless of whether pin comes first or last.
* daemon/remote.c: Treat vcpu and pin as separate words.
* include/libvirt/libvirt.h.in: Likewise.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_conf.h: Likewise.
* src/driver.h: Likewise.
* src/libvirt.c: Likewise.
* src/libvirt_private.syms: Likewise.
* src/libvirt_public.syms: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* tools/virsh.c: Likewise.
* src/remote/remote_protocol.x: Likewise.
* src/remote_protocol-structs: Likewise.
Suggested by Matthias Bolte.
This patch teaches "virsh vcpupin" command to query if no list
is given. Its feature is to show CPU affinity information in more
reader-friendly way.
# virsh vcpupin VM --config
VCPU: CPU Affinity
----------------------------------
0: 1-6,9-20
1: 10
2: 5,9-11,15-20
3: 1,3,5,7,9,11,13,15
When cpulist is omitted, vcpu number is optional. When vcpu number is
provided, information of only specified vcpu is displayed.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The "virsh vcpuinfo" command results in failure when the target domain
is inactive on KVM. This patch improves this behavior by adding the
fallback to invoke virDomainGetVcpupinInfo API in case of
virDomainGetVcpus API returns error and the target domain is inactive.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
If an application is using libvirt + KVM as a piece of its
internal infrastructure to perform a specific task, it can
be desirable to guarentee the VM dies when the virConnectPtr
disconnects from libvirtd. This ensures the app can't leak
any VMs it was using. Adding VIR_DOMAIN_START_AUTOKILL as
a flag when starting guests enables this to be done.
* include/libvirt/libvirt.h.in: All VIR_DOMAIN_START_AUTOKILL
* src/qemu/qemu_driver.c: Support automatic killing of guests
upon connection close
* tools/virsh.c: Add --autokill flag to 'start' and 'create'
commands
We weren't using the @FOO@ notation for a Makefile substitution,
but instead for a sed rule, so using [@]FOO@ instead avoids the
need to exempt this syntax check.
* cfg.mk (_makefile_at_at_check_exceptions): Delete.
* tools/Makefile.am (virt-xml-validate, virt-pki-validate): Avoid
tripping syntax-check.
Reported by Daniel P. Berrange.
https://bugzilla.redhat.com/show_bug.cgi?id=682121
Gettext reserves the empty string for internal use, and it must
not be passed through _(). We were violating this for commands
that (for whatever reason) used "" for their description.
* tools/virsh.c (vshCmddefHelp): Don't translate empty string.
Reported by Tatsuo Kawasaki.
Since we virEventRegisterDefaultImpl is now a public API, callers need
a way to invoke the default registered Handle and Timeout functions. We
already have general functions for these internally, so promote
them to the public API.
v2:
Actually add APIs to libvirt.h
Producing an xml file just for name and description fields is
overkill; this makes life easier from virsh.
* tools/virsh.c (cmdSnapshotCreateAs): New command.
(snapshotCmds): Install it.
* tools/virsh.pod: Document it.
The 'char *cur' variable was being assigned from a
'const char *' string, thus discarding constness.
As well as causing a compile warning, it masked a
piece of code which attempts to assign to the
previously const string.
* tools/virsh.c: Fix const-ness of 'cur' variable in vcpupin
When resetting vcpupin setting, we have to specify all host physical
cpus as a cpulist parameter of virsh vcpupin command. It's a little
tedious.
This patch changes to allow to receive the special keyword 'r' as a cpulist
parameter of virsh vcpupin command when resetting vcpupin setting.
If you set the following:
# virsh vcpupin VM 0 r
the vcpu0 will be pinned to all physical cpus.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
When using vcpupin command, we have to speficy comma-separated list as cpulist,
but this is tedious in case the number of phsycal cpus is large.
This patch improves this by introducing special markup "-" and "^" which are
similar to XML schema of "cpuset" attribute.
The example:
# virsh vcpupin Guest 0 0-15,^8
is identical to
# virsh vcpupin Guest 0 0,1,2,3,4,5,6,7,9,10,11,12,13,14,15
NOTE: The expression is sequentially evaluated, so "0-15,^8" is not identical
to "^8,0-15".
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This reduces things from O(n^2) to O(n).
* tools/virsh.c (vshCommandOptArgv): Change signature.
(cmdEcho): Update caller.
Based on a patch by Lai Jiangshan.
Define two new virsh commands:
* blockpull: Perform block pull operations (incremental plus start
and stop continuous streams)
* blockpullinfo: Retrieve progress info for continuous block pull
Share print_job_progress() with the migration code.
* tools/virsh.c: implement the new commands
Signed-off-by: Adam Litke <agl@us.ibm.com>
A VSH_OFLAG_REQ_OPT option means --optionname is required when used.
It will kill any ambiguity, even a !VSH_OFLAG_REQ option listed before
a VSH_OFLAG_REQ option, if the !VSH_OFLAG_REQ option is a
VSH_OFLAG_REQ_OPT option.
It will help us use optional argument with VSH_OT_ARGV argument.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
A name will improve the usege, example
# virsh help echo
NAME
echo - echo arguments
SYNOPSIS
echo [--shell] [--xml] [<string>]...
DESCRIPTION
Echo back arguments, possibly with quoting.
OPTIONS
--shell escape for shell use
--xml escape for XML use
<string> arguments to echo
"[<string>]..." is added to SYNOPSIS.
"<string> arguments to echo" is added to OPTIONS.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Qemu once supported following memory stats which will returned by
"query_balloon":
stat_put(dict, "actual", actual);
stat_put(dict, "mem_swapped_in", dev->stats[VIRTIO_BALLOON_S_SWAP_IN]);
stat_put(dict, "mem_swapped_out", dev->stats[VIRTIO_BALLOON_S_SWAP_OUT]);
stat_put(dict, "major_page_faults", dev->stats[VIRTIO_BALLOON_S_MAJFLT]);
stat_put(dict, "minor_page_faults", dev->stats[VIRTIO_BALLOON_S_MINFLT]);
stat_put(dict, "free_mem", dev->stats[VIRTIO_BALLOON_S_MEMFREE]);
stat_put(dict, "total_mem", dev->stats[VIRTIO_BALLOON_S_MEMTOT]);
But it later disabled all the stats except "actual" by commit
07b0403dfc2b2ac179ae5b48105096cc2d03375a.
libvirt doesn't parse "actual", so user will always see a empty result
with "virsh dommemstat $domain". Even qemu haven't disabled the stats,
we should support parsing "actual".
This patch deprecates following enums:
VIR_DOMAIN_MEM_CURRENT
VIR_DOMAIN_MEM_LIVE
VIR_DOMAIN_MEM_CONFIG
VIR_DOMAIN_VCPU_LIVE
VIR_DOMAIN_VCPU_CONFIG
VIR_DOMAIN_DEVICE_MODIFY_CURRENT
VIR_DOMAIN_DEVICE_MODIFY_LIVE
VIR_DOMAIN_DEVICE_MODIFY_CONFIG
And modify internal codes to use virDomainModificationImpact.
This patch adds the new option (--live, --config and --current) to
"virsh vcpupin" command. The behavior of above aption is the same as
that of "virsh setmem", "virsh setvcpus", and whatnot.
When the --config option is specified, the command affects a persistent
domain, while --live option is specified, it affects a running (live) domain.
The --current option cannot be used with --config or --live at the same
time, and when --current is specified, it affects a "current" domain.
Coverity complained about these intentional fallthrough cases, but
not about other cases that were explicitly marked with nice comments.
For some reason, Coverity doesn't seem smart enough to parse the
up-front English comment in virsh about intentional fallthrough :)
* tools/virsh.c (cmdVolSize): Mark fallthrough in a more typical
fashion.
* src/conf/nwfilter_conf.c (virNWFilterRuleDefDetailsFormat)
(virNWFilterRuleDetailsParse): Mark explicit fallthrough.
This commit is safe precisely because there has been no release
for any of the enum values being deleted (they were added post-0.9.1).
After the 0.9.2 release, we can then take advantage of
virDomainModificationImpact in more places.
* include/libvirt/libvirt.h.in (virDomainModificationImpact): New
enum.
(virDomainSchedParameterFlags, virMemoryParamFlags): Delete, since
these were never released, and the new enum works fine here.
* src/libvirt.c (virDomainGetMemoryParameters)
(virDomainSetMemoryParameters)
(virDomainGetSchedulerParametersFlags)
(virDomainSetSchedulerParametersFlags): Update documentation.
* src/qemu/qemu_driver.c (qemuDomainSetMemoryParameters)
(qemuDomainGetMemoryParameters, qemuSetSchedulerParametersFlags)
(qemuSetSchedulerParameters, qemuGetSchedulerParametersFlags)
(qemuGetSchedulerParameters): Adjust clients.
* tools/virsh.c (cmdSchedinfo, cmdMemtune): Likewise.
Based on ideas by Daniel Veillard and Hu Tao.
I intentionally set things up so 'virsh help interface' lists
commands in alphabetical order, but 'man virsh' lists them in
topical order; this matches our practice on some other commands.
* tools/virsh.pod: Document all iface commands.
* tools/virsh.c (ifaceCmds): Sort.
The virSysinfoIsEqual method was mistakenly inside a #ifndef WIN32
conditional.
The existing virSysinfoFormat is also stubbed out on Win32, even
though the code works without any trouble. This breaks XML output
on Win32, so the stub is removed.
virsh migrate mistakenly had some variables inside the conditional
* src/util/sysinfo.c: Build virSysinfoIsEqual on Win32 and remove
Win32 stub for virSysinfoFormat
* tools/virsh.c: Fix variable declaration on Win32
Switch virsh migrate over to use virDomainMigrate2 and
virDomainMigrateToURI2. This is still compatible with
older libvirts, because these methods dynamically choose
whether to perform v1, v2 or v3 migration based on declared
RPC support from the libvirtd instances
Add a --xml arg which allows the user to pass in a custom
XML document. This XML document must be ABI compatible
with the current *live* XML document for the running guest
on the source host. ABI compatibility will be enforced by
any driver supporting this function
* tools/virsh.c: Add '--xml' arg to migrate command
Since we can now set just --live or --config, we also need to be
able to query that back.
In the case of setting both --live and --config, it shouldn't matter
which value we read back; otherwise, since querying treats the two
flags as mutually exclusive, so does this patch.
* tools/virsh.c (cmdSchedinfo): Use new API where appropriate.
The new flags allow to pick current state, config or the live
parameter, with current being the existing API default (0).
This also hooks this to --config, --live, --current parameters for
the memtune virsh command
* include/libvirt/libvirt.h.in: defines the new flags
* tools/virsh.c: adds support at virsh level
* tools/virsh.pod: updates virsh documentation
Ramon de Carvalho Valle reported a problem with:
virsh connect qemu:///system
as a non-root user. The real root problem appears to be a regression
in libvirtd being auto-started on the default qemu:///session URI;
however, the symptom points to an independent flaw in virsh - we
shouldn't be wasting efforts on making a connection if we aren't going
to be using that connection. Fixing virsh avoids Ramon's issue, while
I work in the meantime to fix the real libvirtd regression.
This patch looks big, but that's because 'gcc -Wmissing-field-initializers'
gets triggered by './autobuild.sh --enable-compile-warnings=error', so I
had to add 0 initialization to everyone (rather than my preference of
just adding the non-zero flags to virshCmds and to cmdConnect).
Meanwhile, if you use 'virsh -c URI', the connection must succeed; this
patch _only_ optimizes the default connection to be deferred to a later
point where we know if a particular command to be run needs a connection.
* tools/virsh.c (VSH_CMD_FLAG_NOCONNECT): New flag.
(vshCmdDef): Add new flags field.
(vshCommandRun): Honor new flag.
(domManagementCmds, domMonitoringCmds, storagePoolCmds)
(storageVolCmds, networkCmds, nodedevCmds, ifaceCmds)
(nwfilterCmds, secretCmds, virshCmds, snapshotCmds)
(hostAndHypervisorCmds): Populate new field.
(vshReconnect): Don't warn on initial connection.
virsh didn't call virInitialize(), which (among other things)
initializes virLastErr thread local variable. As a result of that, virsh
could just segfault in virEventRegisterDefaultImpl() since that is the
first call that touches (resets) virLastErr.
I have no idea what lucky coincidence made this bug visible but I was
able to reproduce it in 100% cases but only in one specific environment
which included building in sandbox.
We already have virAsprintf, so picking a similar name helps for
seeing a similar purpose. Furthermore, the prefix V before printf
generally implies 'va_list', even though this variant was '...', and
the old name got in the way of adding a new va_list version.
global rename performed with:
$ git grep -l virBufferVSprintf \
| xargs -L1 sed -i 's/virBufferVSprintf/virBufferAsprintf/g'
then revert the changes in ChangeLog-old.
Clang detected that vol-download will call unlink(NULL) if there
is a parse error during option parsing. Also, mingw doesn't like
unlinking an open file.
* tools/virsh.c (cmdVolDownload): Only unlink file if created.
Commit 36deff04 introduced a regression due to which virsh is not able
to log to a file - msg_buf was changed from an array to a pointer
without corresponding change to usage of "sizeof()".
Fix regression in virsh logging
Signed-off-by: Supriya Kannery <supriyak@in.ibm.com>
We don't use gnulib's sanitizations for vfprintf, but vshDebug
was used with %zu, which means that it would fail on mingw.
Thank goodness the compiler indirectly caught this for us :)
virsh.c: In function 'vshDebug':
virsh.c:12105:5: warning: function might be possible candidate for
'ms_printf' format attribute [-Wmissing-format-attribute]
since mingw <stdio.h> hasn't yet added gcc attributes to vfprintf.
* tools/virsh.c (vshDebug): Avoid vfprintf.
(vshPrintExtra): Use lighter-weight fputs.
Reported by Matthias Bolte.
This patch does the following things:
1. The return value of cmdSchedInfoUpdate() can be -1, 0 and 1. So the
type of return value should be int not bool.(This function is not a
entry of a virsh command, but the name of this function likes cmdXXX)
2. The type of cmdSchedinfo()'s, cmdFreecell()'s, cmdPoolList()'s and
cmdVolList()'s return value is bool not int, so change the type of
variable ret_val, func_ret and functionReturn.
3. Add a variable functionReturn for cmdMigrate(), cmdAttachInterface(),
cmdDetachInterface(), cmdAttachDisk() and cmdDetachDisk() to save the
return value.
4. Change the type of variable ret in the function cmdAttachDevice(),
cmdDetachDevice(), cmdUpdateDevice(), cmdAttachInterface(),
cmdDetachInterface(), cmdAttachDisk() and cmdDetachDisk() to int, as
we use it to save the return value of virXXX() and the type of virXXX()'s
return value is int not bool.
5. Do some cleanup when virBuff.error is 1.
The bug 1-4 were introduced by commit b56fa5bb.
Gnulib already guarantees <stdbool.h>, so it is easier to just
use the standardized spellings.
* tools/virsh.c (vshCmdDef): Change callback to return real bool.
(__vshControl): Change several fields to bool.
(vshCommandOptBool): Change return type.
All callers updated.
* tools/Makefile.am (virsh-net-edit.c, virsh-pool-edit.c):
Likewise.
Regression introduced in 0.8.5, commit c1564268. The command
'virsh freecell 0' quit working when it changed from an optional
string to an optional integer.
This patch introduces a slight change that specifying an option
twice is now detected as an error. It also changes things so
that a command that has more than 1 required option will not
complain about missing options if one but not all of the options
were given in long format, as in 'virsh vol-create --pool p file',
as well as making positional parsing work for all optional
options (each positional argument is associated with the earliest
option that has not yet been seen by name).
Optional boolean options can appear before required argument
options, because they don't affect positional argument parsing,
and obviously a required boolean option makes no sense.
Technically, this patch renders VSH_OT_STRING and VSH_OT_DATA
redundant; but cleaning that up can be a separate patch.
No command should ever need more than 32 options, right? :)
* tools/virsh.c (vshCmddefGetData, vshCmddefGetOption)
(vshCommandCheckOpts): Alter parameters to use bitmaps.
(vshCmddefOptParse): New function.
(vshCommandParse): Update for better handling of positional
arguments.
(vshCmddefHelp): Allow unit tests to validate options.
The current state of virsh parsing is that:
$ virsh vol-info /path/to/image
$ virsh vol-info --pool default /path/to/image
$ virsh vol-info --pool default --vol /path/to/image
all lookup the volume by path (technically, the last two also attempt
a name lookup within a pool, whereas the first skips that step, but
the end result is the same); meanwhile:
$ virsh vol-info default /path/to/image
complains about unexpected data. Why? Because the --pool option is
optional, so default was parsed as the --vol argument, and
/path/to/image.img doesn't match up with any remaining options that
require an argument. For proof, note that:
$ virsh vol-info default --vol /path/to/image
complains about looking up 'default' - the parser mis-associated both
arguments with --vol. Given the above, the only way to specify pool
is with an explicit "--pool" argument (you can't specify it
positionally). However, named arguments can appear in any order, so:
$ virsh vol-info /path/to/image --pool default
$ virsh vol-info --vol /path/to/image --pool default
have also always worked. Therefore, this patch has no functional
change on vol-info option parsing, but only on 'virsh help vol-info'
synopsis layout. However, it also allows the next patch to 1) enforce
that required options are always first (without this patch, the next
patch would fail the testsuite), and 2) allow the user to omit the
"--pool" argument. That is, the next patch makes it possible to do:
$ virsh vol-info /path/to/image default
which to date was not possible.
* tools/virsh.c (opts_vol_create_from, opts_vol_clone)
(opts_vol_upload, opts_vol_download, opts_vol_delete)
(opts_vol_wipe, opts_vol_info, opts_vol_dumpxml, opts_vol_key)
(opts_vol_path): List optional pool parameter after required
arguments.
Based on a smaller patch developed by Moritoshi Oshiro:
https://bugzilla.redhat.com/show_bug.cgi?id=693963
* tools/virsh.pod (freecell): Mention all, and clarify that
optional cellno requires --cellno.
This patch adds the new options (--live, --config, and --current) to
"virsh setmaxmem" command. The behavior of above options is the same
as that of "virsh setmem". When the --config option is specified, a
modification is effective for the persistent domain, while the --live
option is specified, a modification is effective for an active
domain. The --current option is specified, it affects a current
domain.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This patch adds the new option (--current) to the "virsh setmem" command.
When --current option is specified, it affects a "current" domain.
The word "current" denotes that if a domain is running, it affects
a running domain only; otherwise it affects a persistent domain.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
When the new maximum memory size becomes less than the current memory size,
I think it is not the libvirt client but the each driver that decides the behavior
(reject the operation or shrink the current memory size).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
1) Both "qemuDomainStartWithFlags" and "qemuAutostartDomain" try to
restore the domain from managedsave'ed image if it exists (by
invoking "qemuDomainObjRestore"), but it unlinks the image even
if restoring fails, which causes data loss. (This problem exists
for "virsh managedsave dom; virsh start dom").
The fix for is to unlink the managed state file only if restoring
succeeded.
2) For "virsh save dom; virsh restore dom;", it can cause data
corruption if one reuse the saved state file for restoring. Add
doc to tell user about it.
3) In "qemuDomainObjStart", if "managed_save" is NULL, we shouldn't
fallback to start the domain, skipping it to cleanup as a incidental
fix. Discovered by Eric.
Commit 78ba748ef1 claims to fix
documentation for swap_hard_limit virsh memtune option but it only fixes
documentation in formatdomain.html and libvirt.h. This patch completes
the task by fixing "virsh help memtune" output and memtune section of
virsh man page.
strcase{cmp/str} have the drawback of being sensitive to the global
locale; this is unacceptable in a library setting. Prefer a
hard-coded C locale alternative for all but virsh, which is user
facing and where the global locale isn't changing externally.
* .gnulib: Update to latest, for c-strcasestr change.
* bootstrap.conf (gnulib_modules): Drop strcasestr, add c-strcase
and c-strcasestr.
* cfg.mk (sc_avoid_strcase): New rule.
(exclude_file_name_regexp--sc_avoid_strcase): New exception.
* src/internal.h (STRCASEEQ, STRCASENEQ, STRCASEEQLEN)
(STRCASENEQLEN): Adjust offenders.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextEjectMedia):
Likewise.
* tools/virsh.c (namesorter): Document exception.
The new commands vol-upload and vol-download, allow a local file
to be transferred to/from a storage volume.
* tools/virsh.c: Add vol-upload and vol-download commands
* tools/virsh.pod: Document new commands
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.
Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.
The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.
Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.
* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
src/opennebula/one_conf.c, src/opennebula/one_conf.h,
src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
to OpenNebula
* docs/drvone.html.in: Delete file
"virsh connect ''" should try to connect to the default connection,
but the previous patch made it issue a warning about an invalid URI.
* tools/virsh.c (VSH_OFLAG_EMPTY_OK): New option flag.
(vshCommandOptString): Per the declaration, value is required to
be non-NULL. Honor new flag.
(opts_connect): Allow empty string connection.
At least protect the $uri variable against further expansion by properly
quoting it. While doing that, also quote all other variables to protect
against shell meta characters.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Otherwise connection of hypervisor driver will be leaked when
one shutdown the guest in console. e.g.
[root@localhost]# init 0
......
init: Re-executing /sbin/init
Halting system...
Power down.
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
awk splits the line on consecutive spaces, which breaks getting the name
of a domain whose name contains spaces. Use sed instead to strip the
"Name:" prefix from the line
Signed-off-by: Philipp Hahn <hahn@univention.de>
This patch adds the new options (--live and --config) to "virsh setmem" command.
The behavior of above options is the same as that of "virsh setvcpus" and so on.
That is, when the --config option is specified, a modification is effective for
the persistent domain. Moreover we can modify the memory size of inactive domains
as well as that of active domains.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
as described at
http://wiki.debian.org/ToolChain/DSOLinkinghttps://fedoraproject.org/wiki/UnderstandingDSOLinkChange
otherwise the build fails on current Debian unstable with:
CCLD virsh
/usr/bin/ld: virsh-virsh.o: undefined reference to symbol 'xmlSaveTree@@LIBXML2_2.6.8'
/usr/bin/ld: note: 'xmlSaveTree@@LIBXML2_2.6.8' is defined in DSO //usr/lib/libxml2.so.2 so try adding it to the linker command line
//usr/lib/libxml2.so.2: could not read symbols: Invalid operation
This is needed to detect situations when optional argument was
specified with non-integer value: '--int-opt foo'. To keep functions
uniform vshCommandOptString function was also changed, because it
returns tri-state value as well. Given result pointer is updated only
in case of success. If parsing fails, result is not updated at all.
Not all applications have an existing event loop they need
to integrate with. Forcing them to implement the libvirt
event loop integration APIs is an undue burden. This just
exposes our simple poll() based implementation for apps
to use. So instead of calling
virEventRegister(....callbacks...)
The app would call
virEventRegisterDefaultImpl()
And then have a thread somewhere calling
static bool quit = false;
....
while (!quit)
virEventRunDefaultImpl()
* daemon/libvirtd.c, tools/console.c,
tools/virsh.c: Convert to public event loop APIs
* include/libvirt/libvirt.h.in, src/libvirt_private.syms: Add
virEventRegisterDefaultImpl and virEventRunDefaultImpl
* src/util/event.c: Implement virEventRegisterDefaultImpl
and virEventRunDefaultImpl using poll() event loop
* src/util/event_poll.c: Add full error reporting
* src/util/virterror.c, include/libvirt/virterror.h: Add
VIR_FROM_EVENTS
The event loop implementation is used by more than just the
daemon, so move it into the shared area.
* daemon/event.c, src/util/event_poll.c: Renamed
* daemon/event.h, src/util/event_poll.h: Renamed
* tools/Makefile.am, tools/console.c, tools/virsh.c: Update
to use new virEventPoll APIs
* daemon/mdns.c, daemon/mdns.c, daemon/Makefile.am: Update
to use new virEventPoll APIs
The daemon code calls virEventAddHandleImpl directly instead
of calling the wrapper virEventAddHandle.
* tools/console.c, daemon/libvirtd.c, daemon/mdns.c: Convert to
use primary event APIs
In a couple of commands virsh catches & ignores errors, but fails
to reset last_error. Thus the error is ignored, but still reported
to the user.
* tools/virsh.c: Reset last_error if ignoring an error
Alas, the shell is not a real programming language.
Patch generated by manual confirmation of vim's
s/[^"]\@<=\$\S\+\s\@=/"&"/gc
and
s/\(echo \)\@<=[^"].*\$.*$/"&"/c matches.
This patch generate a lot of noise and carries little benefits, as
I do not really expect $PKI to contain spaces or backticks. I'm just
fuming, and would not really mind if this patch is ignored
Right now, 'man libvirtd' includes information that depends on
configure results, so it must be generated on the fly and live
in $(builddir); however, requiring pod2man on all end user
machines is overkill. Meanwhile, 'man virsh' doesn't mention
any configure results, so it can be built at 'make dist' time.
If that situation changes in the future, we can generate virsh.1
in the same way that we generate libvirtd.8.
* daemon/Makefile.am (libvirtd.8.in): New rule, to run pod2man in
advance of distribution.
(libvirtd.8): Use only sed from tarball.
(EXTRA_DIST): Ship new file.
(libvirtd.pod): Delete unused rule.
(man8_MANS): Let automake know which section to use.
(CLEANFILES, MAINTAINERCLEANFILES): Adjust to new files.
* tools/Makefile.am (dist_man1_MANS): Distribute pre-built man
pages, fine since they don't require any substitution.
(virt-xml-validate.1, virt-pki-validate.1): Change input source.
(virsh.1): Build into srcdir.
(CLEANFILES, MAINTAINERCLEANFILES): Adjust to new build style.
* daemon/.gitignore: Update.
Reported by Diego Elio Pettenò.
Virsh freecell --all was not only getting wrong NUMA nodes count, but
even the NUMA nodes IDs. They doesn't have to be continuous, as I've
found out during testing this. Therefore a modification of
nodeGetCellsFreeMemory() error message.
Compilation on mingw was warning about %lld use in fprintf, and
in the gnulib strptime module about dead labels.
* tools/virsh.c (vshPrint): Change redirect.
(vshPrintExtra): Allow use within vshPrint. Avoid fprintf on
arbitrary formats, since we aren't using gnulib module; instead,
use virVasprintf to pre-format.
(vshError): Likewise.
* .gnulib: Update to latest, for mingw strptime warning fix.
Reported by Matthias Bolte.
Win32 doesn't have a concept of signal masks so disable that
code. It is unclear how SIGINT is delivered (if at all) on
Win32, so this might further work to provide an alternative
to pthread_sigmask
* tools/virsh.c: Avoid pthread_sigmask on Win32
