The setting is needed for the windows driver to work properly and doesn't have negative effects on other usage.
Signed-off-by: Lukas Ke nicelukas@hotmail.com
Expand the SEV guest kbase guide with information about how to configure
a SEV/SEV-ES guest when attestation is required, and mention the use of
virt-qemu-sev-validate as a way to confirm it.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The build_root() method is deprecated in 0.56.0 and we're
recommended to use project_build_root() instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When reconnecting to a running QEMU process, we construct the
per-domain path in all hugetlbfs mounts. This is a relict from
the past (v3.4.0-100-g5b24d25062) where we switched to a
per-domain path and we want to create those paths when libvirtd
restarts on upgrade.
And with namespaces enabled there is one corner case where the
path is not created. In fact an error is reported and the
reconnect fails. Ideally, all mount events are propagated into
the QEMU's namespace. And they probably are, except when the
target path does not exist inside the namespace. Now, it's pretty
common for users to mount hugetlbfs under /dev (e.g.
/dev/hugepages), but if domain is started without hugepages (or
more specifically - private hugetlbfs path wasn't created on
domain startup), then the reconnect code tries to create it.
But it fails to do so, well, it fails to set seclabels on the
path because, because the path does not exist in the private
namespace. And it doesn't exist because we specifically create
only a subset of all possible /dev nodes. Therefore, the mount
event, whilst propagated, is not successful and hence the
filesystem is not mounted. We have to do it ourselves.
If hugetlbfs is mount anywhere else there's no problem and this
is effectively a dead code.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2123196
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There are two points I've taken for granted:
1) the mount points are set before starting a guest,
2) the / and its submounts are marked as shared, so that mount
events propagate into child namespaces when assumption 1) is
not held.
But what's obvious to me might not be obvious to our users.
Document these known limitations.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2123196
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Although these and functions in the following two patches are for
now just being used by the qemu driver, it makes sense to have all
begin job functions in the same file.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainObjEndJob() into
src/conf/virdomainjob as universal virDomainObjEndJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainObjBeginJob() into
src/conf/virdomainjob as universal virDomainObjBeginJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Upstream will be dropping the sheepdog storage backend, so we need to
stop building the package and obsolete it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In most cases, disabling the secure-boot or the enrolled-keys
firmware feature will achieve the same result: allowing an
unsigned operating system to run.
Right now we're only documenting the latter configuration. Add
the former as well, and explain the difference between the two.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It should be enough to enable or disable the enrolled-keys feature
to control whether Secure Boot is enforced, but there's a slight
complication: many distro packages for edk2 include, in addition
to general purpose firmware images, builds that are targeting the
Confidential Computing use case.
For those, the firmware descriptor will not advertise the
enrolled-keys feature, which will technically make them suitable
for satisfying a configuration such as
<os firmware='efi'>
<firmware>
<feature state='off' name='enrolled-keys'/>
</firmware>
</os>
In practice, users will expect the general purpose build to be
used in this case. Explicitly asking for the secure-boot feature
to be enabled achieves that result at the cost of some slight
additional verbosity.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fix docs illustrating call with an obsolete macro.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When using runtime setting of logging with 'virt-admin' it can be
confusing that the settings are discarded when the shutdown timeout of a
daemon is reached.
Add a note about this behaviour along with a suggestion to use
virt-admin to disable the behaviour if needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Provide simple recipes for the most common high-level tasks.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of the links were broken by moving the article into kbase, but in
this case we need to also fix the anchor names.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Certain links were missing the '../' prefix to reach files in the parent
directory from the time the page was introduced.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The links were broken when the documentation was moved into the
'internals' subdirectory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove what seems like links from some headings. This error predates the
conversion to RST where an '<a href' was used instead of '<a id' in the
source document.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some links didn't exit the 'kbase/' directory and 'virDomainBackupEnd'
API never existed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the internal documentation about qemu threading to the knowledge
base.
The conversion included rstizing of the text document, mainly just
fixing of the headline and enclosing function names and code examples
into code block sections.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Original conversion didn't properly convert local links. Fix them by
pointing to the section name. In certain cases this requires
reformulation of the text.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Original conversion didn't properly convert local links. Fix them by
pointing to the section name. In certain cases this requires
reformulation of the text.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While the content is slightly outdated it's still a good primer on how
an API call traverses through the client library and to the remote
driver.
To make the page useful, this commit:
- removes the paragraphs which were intended to serve as a directory
page for the 'internals' subdirectory
- adds a note saying that some facts might not be up to date
- adds linking to this page from the kbase directory page
- adds more monospace formatting around function names
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Note that this document was not referenced from any top level page. This
patch does a straight conversion and leaves it unreferenced.
Next patch will then modify it to serve as an overview (hence the new
name) of how an API call happens.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add an 'internals' subfolder to 'docs/kbase' to house all the documents
under internals. The output files are still under 'docs/kbase'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically we had two top level XSL files for top level and nested
documents which only differ in what they pass for 'href_base' to the
main 'page.xsl' file.
We can instead pass the variable as argument from the build system so
that we have just one XSL file and also allow for more nested document
trees in the future.
The '404' page is special even with the current XSL way so we add a
special case for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a separate column of documents regarding internals of libvirt and
move the 'migrationinternals' and 'incrementalbackupinternals' pages
under the new heading.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
