There are no callers for these. Remove them and the monitor
implementations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
drive-mirror allows only file targets. Introduce support for
blockdev-mirror that is able to copy to any BDS described by a node name
in qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
According to virDomainScreenshot() documentation, screens are
numbered sequentially. e.g. having two graphics cards, both with
four heads, screen ID 5 addresses the second head on the second
card.
But apart from that, there's nothing special happening here.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we've gotten rid of misleading names we can introduce
qemuMonitorGetObjectProps() function which queries -object
properties. Again, some parts of code can be reused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow encryption of the non-shared storage migration NBD connection
we will need to instantiated the NBD server with the TLS env.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
So far we are repeating the following lines over and over:
if (!(virSomeObjectClass = virClassNew(virClassForObject(),
"virSomeObject",
sizeof(virSomeObject),
virSomeObjectDispose)))
return -1;
While this works, it is impossible to do some checking. Firstly,
the class name (the 2nd argument) doesn't match the name in the
code in all cases (the 3rd argument). Secondly, the current style
is needlessly verbose. This commit turns example into following:
if (!(VIR_CLASS_NEW(virSomeObject,
virClassForObject)))
return -1;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Extract architecture specific data from query-cpus[-fast] if
available. A new function qemuMonitorJSONExtractCPUArchInfo()
can then call architecture-specific extraction handlers.
Initially, there's a handler for s390 cpu info to
set the halted property depending on the s390 cpu state
returned by QEMU. With this it's still possible to report
the halted condition even when using query-cpus-fast.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use query-cpus-fast instead of query-cpus if supported by QEMU.
Based on the QEMU_CAPS_QUERY_CPUS_FAST capability.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This function is indeed getting -device properties and not
-object properties. The current name is misleading.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since the monitor code no longer needs to see this enum, we move it
to the place where migration parameters are defined and drop the
"monitor" reference from the name.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to have all migration capabilities parsing and formatting at one
place, i.e., in qemu_migration_params.c. The parsing is already there in
qemuMigrationCapsCheck.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to have all migration parameters parsing and formatting at one
place, i.e., in qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to have all migration parameters parsing and formatting at once
place, i.e., in qemu_migration_params.c.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally QEMU provided query-migrate-cache-size and
migrate-set-cache-size QMP commands for querying/setting XBZRLE cache
size. In version 2.11 QEMU added support for XBZRLE cache size to the
general migration paramaters commands.
This patch adds support for this parameter to libvirt to make sure it is
properly restored to its original value after a failed or aborted
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our current monitor API forces the caller to call
migrate-set-capabilities QMP command for each capability separately,
which is quite suboptimal. Let's add a new API for setting all
capabilities at once.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The last use of qemuMonitorMigrateToCommand was removed years back in
commit 2e90c9daf9
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Fri Nov 6 16:50:26 2015 +0000
qemu: assume support for all migration protocols except rdma
Prior to that commit, 'exec:' to used to replicate the 'unix:' protocol
by spawning 'nc'.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Rather than trying to prevent stealing of the 'actions' virJSONValue
into the monitor command replace the code so that it does the same
thing, since 'actions' was actually not really used after calling the
monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The JSON array was processed to the hash table used by the query apis in
the monitor code. Move it to a new helper in qemu_qapi.c.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
There is a long standing hack to pass a virConnectPtr into the
qemuMonitorStartCPUs method, so that when the text monitor prompts
for a disk password, we can lookup virSecretPtr objects. This causes
us to have to pass a virConnectPtr around through countless methods
up the call chain....except some places don't have any virConnectPtr
available so have always just passed NULL. We can finally fix this
disastrous design by using virGetConnectSecret() to open a connection
to the secret driver at time of use.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add the query-dump API's in order to allow the dump-guest-memory
to be used to monitor progress. This will use the dump stats
extraction helper to fill a return buffer.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The event will be fired when the domain memory only dump completes.
Fill in a return buffer to store/pass along the dump statistics that
will be eventually shared by a query-dump command. Also pass along
the status of the filling and any possible error received.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1536461
This reverts commit aeda1b8c56.
Problem is that we need mon->lastError to be set because it's
used all over the place. Also, there's nothing wrong with
reporting error if one occurred. I mean, if there's a thread
executing an API and which currently is talking on monitor it
definitely wants the error reported.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We read from QEMU until seeing a \r\n pair to indicate a completed reply
or event. To avoid memory denial-of-service though, we must have a size
limit on amount of data we buffer. 10 MB is large enough that it ought
to cope with normal QEMU replies, and small enough that we're not
consuming unreasonable mem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The PROBE macro used in qemuMonitorIOProcess and the VIR_DEBUG message
in qemuMonitorJSONIOProcess create a lot of logging churn when debug
logging is enabled during monitor communication.
The messages logged from the PROBE macro are rather useless since they
are reporting the partial state of receiving the reply from qemu. The
actual full reply is still logged in qemuMonitorJSONIOProcessLine once
the full message is received.
This patch pass event error up to the place where we can
use it. Error is passed only for sync blockjob event mode
as we can't use the error in async mode. In async mode we
just pass the event details to the client thru event API
but current blockjob event API can not carry extra parameter.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We handle incremental storage migration in a different way. The support
for this new (as of QEMU 2.10) parameter is only needed for full
coverage of migration parameters used by QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We already support several ways of setting migration bandwidth and this
is not adding another one. With this patch we are able to read and write
this parameter using query-migrate-parameters and migrate-set-parameters
in one call with all other parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The parameters used "migrate" prefix which is pretty redundant and
qemuMonitorMigrationParams structure is our internal representation of
QEMU migration parameters and it is supposed to use names which match
QEMU names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We already support setting the maximum downtime with a dedicated
virDomainMigrateSetMaxDowntime API. This patch does not implement
another way of setting the downtime by adding a new public migration
parameter. It just makes sure any parameter we are able to get from a
QEMU monitor by query-migrate-parameters can be passed back to QEMU via
migrate-set-parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The check can be easily replaced with a simple test in the JSON
implementation and we don't need to update it every time a new parameter
is added.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This new capability enables a pause before device state serialization so
that we can finish all block jobs without racing with the end of the
migration. The pause is indicated by "pre-switchover" state. Once we're
done QEMU enters "device" migration state.
This patch just defines the new capability and QEMU migration states and
their mapping to our job states.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The only remaining user of qemuMonitorGetMigrationCapability is our test
suite. Let's replace qemuMonitorGetMigrationCapability with
qemuMonitorGetMigrationCapabilities there and drop the unused function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When migration fails, QEMU may provide a description of the error in
the reply to query-migrate QMP command. We can fetch this error and use
it instead of the generic "unexpectedly failed" message.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
query-cpu-definitions QMP command returns a list of unavailable features
which prevent CPU models from being usable on the current host. So far
we only checked whether the list was empty to mark CPU models as
(un)usable. This patch parses all unavailable features for each CPU
model and stores them in virDomainCapsCPUModel as a list of usability
blockers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1447169
Since domain can have at most one watchdog it simplifies things a
bit. However, since we must be able to set the watchdog action as
well, new monitor command needs to be used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Seeing a log message saying 'flags=93' is ambiguous & confusing unless
you happen to know that libvirt always prints flags as hex. Change our
debug messages so that they always add a '0x' prefix when printing flags,
and '0' prefix when printing mode. A few other misc places gain a '0x'
prefix in error messages too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Allow getting the raw data from query-blockstats, so that we can use it
to detect the backing chain later on.
Reviewed-by: Eric Blake <eblake@redhat.com>
vcpu properties gathered from query-hotpluggable cpus need to be passed
back to qemu. As qemu did not use the node-id property until now and
libvirt forgot to pass it back properly (it was parsed but not passed
around) we did not honor this.
This patch adds node-id to the structures where it was missing and
passes it around as necessary.
The test data was generated with a VM with following config:
<numa>
<cell id='0' cpus='0,2,4,6' memory='512000' unit='KiB'/>
<cell id='1' cpus='1,3,5,7' memory='512000' unit='KiB'/>
</numa>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1452053
Add a comment for mon->watch to make clear what's the purpose of this
value.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
QEMU will likely report the details of it shutting down, particularly
whether the shutdown was initiated by the guest or host. We should
forward that information along, at least for shutdown events. Reset
has that as well, however that is not a lifecycle event and would add
extra constants that might not be used. It can be added later on.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1384007
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If a shutdown is expected because it was triggered via libvirt we can
also expect the monitor to close. In those cases do not report an
internal error like:
"internal error: End of file from qemu monitor"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
