This will be required when doing blockdev-add to conform with the
approach qemu choses to create the disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When used directly with blockdev-add/-blockdev the cache mode will need
to be specified directly for every image rather than just for the disk
itself. This implements the backing options 'direct' and 'no-flush'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemu declares node-name as a 32 byte buffer and silently truncates
anything longer than that. This is unacceptable for libvirt, so we need
to make sure that we won't ever supply a node-name exceeding 31 chars.
Add a function which will do the validation and use it to validate
storage-protocol node names.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The gluster protocol in qemu uses two styles, one of which is legacy and
not covered by the QAPI schema.
To allow using of the new style in the blockdev-add code, add a
parameter for qemuBlockStorageSourceGetBackendProps which will switch
between the two modes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Block storage should actually be passed to qemu via 'host_device' or
'host_cdrom' according to the device type. There were no users of this
behaviour so we thankfully can change it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use virFileIsCDROM to detect whether a block device is a cdrom drive and
store it in virStorageSource. This will be necessary to correctly create
the 'host_cdrom' backend in qemu when using -blockdev.
We assume that host_cdrom makes only sense when used directly as a raw
image, but if a backing chain would be put in front of it, libvirt will
use 'host_device' in that case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add detection mechanism which will allow to check whether a path to a
block device is a physical CDROM drive. This will be useful once we will
need to pass it to hypervisors.
The linux implementation uses an ioctl to do the detection, while the
fallback uses a simple string prefix match.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Handle VIR_STORAGE_TYPE_DIR in qemuBlockStorageSourceGetBackendProps so
that a 'vvfat' driver is used, which emulates a FAT filesystem
containing the folders.
qemu requires us to add it as a storage layer, since a 'raw' layer is
usually put on top of it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move it to the validation callback and make it more robust. This will
also put the checks in the correct place to use with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a flag denoting that a virStorageSource is going to be used as a
floppy image. This will be useful in cases where the user passes in
files which shall be exposed as an image to the guest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
'file' backend in qemu supports few more options than the current
implementation. Extract it so that changes don't pollute the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Some properties don't make sense to be configured for every single layer
of the backing chain, but to avoid needing to pass the disk structure we
will copy them to the individual virStorageSource.
Zero detection is applied only for the top layer image, while caching
and iomode for all layers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Few things which are currently stored the virDomainDiskDef structure are
actually relevant for the storage source as well. Add the fields with a
note that they are just mirror of the values from the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Save and restore node names if we know them or when we will be
generating them in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Everything besides the top of the chain is readonly. Track this when
parsing the XML and detecting the chain from the disk. Also fix the
state when taking snapshots.
All other cases where the top image is changed already preserve the
readonly state from the original image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability is unused since we stopped parsing -help output.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The -no-kvm-pit-reinjection option has been deprecated since
its introduction in QEMU 1.3. See commit <1569fa1>.
Drop the capability since all the QEMUs we support allow tuning
the kvm-pit properties via -global.
Also add the QEMU_CAPS_KVM_PIT_TICK_POLICY to the clock-catchup
tests, since expecting it to succeed with QEMU that does not
have kvm-pit makes no sense.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since we started assuming QEMU_CAPS_MACHINE_OPT in
commit <69420756>, this function can only be reached
for unsupported virt types.
Replace the call with a virReportError.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We have been checking whether qemu-img supports the -o compat
option by scraping the -help output.
Since we require QEMU 1.5.0 now and this option was introduced in 1.1,
assume we support it and ditch the help parsing code along with the
extra qemu-img invocation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We have two leftover "capabilites" for qemu-img:
QEMU_IMG_BACKING_FORMAT_OPTIONS
QEMU_IMG_BACKING_FORMAT_OPTIONS_COMPAT
The former says we are able to specify the backing format via -o
(which has been the case for a long time now) and the second one
says we can use -o compat to specify the qcow2 version.
Since we require QEMU 1.5.0, we can always assume -o compat,
which was introduced in QEMU 1.1.
Drop the test cases using FMT_OPTIONS which have a FMT_COMPAT
counterpart to prepare for deprecating FMT_OPTIONS (and these flags)
completely.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When adding a new object to the domain object list, there should
have been 2 virObjectRef calls made one for each list into which
the object was placed to match the 2 virObjectUnref calls that
would occur during Remove as part of virHashRemoveEntry when
virObjectFreeHashData is called when the element is removed from
the hash table as set up in virDomainObjListNew.
Some drivers (libxl, lxc, qemu, and vz) handled this inconsistency
by calling virObjectRef upon successful return from virDomainObjListAdd
in order to use virDomainObjEndAPI when done with the returned @vm.
While others (bhyve, openvz, test, and vmware) handled this via only
calling virObjectUnlock upon successful return from virDomainObjListAdd.
This patch will "unify" the approach to use virDomainObjEndAPI
for any @vm successfully returned from virDomainObjListAdd.
Because list removal is so tightly coupled with list addition,
this patch fixes the list removal algorithm to return the object
as entered - "locked and reffed". This way, the callers can then
decide how to uniformly handle add/remove success and failure.
This removes the onus on the caller to "specially handle" the
@vm during removal processing.
The Add/Remove logic allows for some logic simplification such
as in libxl where we can Remove the @vm directly rather than
needing to set a @remove_dom boolean and removing after the
libxlDomainObjEndJob completes as the @vm is locked/reffed.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since the @dconn reference via args->conn will be used via a thread
or callback, let's make sure memory associated with it isn't free'd
unexpectedly before we use it. The Unref will be done when the object
is Dispose'd.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When adding the @vm to the @args for usage during a thread or
callback, let's add the reference to it at the time of adding to
ensure nothing else deletes it. The corresponding Unref is then
added to the Dispose function.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Rather than open code within virDomainObjListRemove, just call
the *Locked function.
Additionally, add comments to virDomainObjListRemove to describe
the usage model.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use the FindBy{UUID|Name}Locked helpers which will return a locked
and ref counted object rather than the direct virHashLookup and
virObjectLock of the returned object. We'll need to temporarily
virObjectUnref when we assign a new domain @def, but that will
change shortly when virDomainObjListAddObjLocked returns the
correct reference counted object.
Use the virDomainObjEndAPI in the error path to Unref/Unlock for
the corresponding Unref/Unlock of either the FindBy* return or
the virDomainObjNew since both return a reffed/locked object.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Create helpers virDomainObjListFindByUUIDLocked and
virDomainObjListFindByNameLocked to avoid the need
to lock the domain object list leaving that task
for the caller.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This is the old style and we really shouldn't be adding any more
examples like this. Add a comment to warn devs away
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<features><vmcoreinfo/> is a bare boolean XML property. We don't really
use this format anymore and instead prefer tristate <X state=on|off/>
since it's required for modeling on/off/default. If for example future
qemu started enabling vmcoreinfo by default we wouldn't have any way
for the user to turn this off.
Convert it to tristate. For writing XML this is semanticly the same,
<vmcoreinfo/> is processed as <vmcoreinfo state='on'/>.
For apps reading guest XML this is technically an API change,
as they might misinterpret <vmcoreinfo state='off'/>, however this
has only been present in libvirt since 3.10.0 and I don't think any
apps are dependent on this yet
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
