Similar to domainSaveImageDefineXML this commit adds domainManagedSaveDefineXML
API which allows to edit domain's managed save state xml configuration.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
Similar to domainSaveImageGetXMLDesc this commit adds domainManagedSaveGetXMLDesc
API which allows to get the xml of managed save state domain.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1476866
For some reason, we completely ignore <on_reboot/> setting for
domains. The implementation is simply not there. It never was.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This API is definitely modifying state of @vm. Therefore it
should grab a job.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
At some places we either already have synchronous job or we just
released it. Also, some APIs might want to use this code without
having to release their job. Anyway, the job acquire code is
moved out to qemuDomainRemoveInactiveJob so that
qemuDomainRemoveInactive does just what it promises.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We can now check for the error and not care about the return value as
it will be properly handled in virBufferContentAndReset() anyway.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The function is useful even without using the return value. And if
needed, the return value can be obtained by other calls as well. The
potential for clean-up can be seen in the following patch.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Otherwise longer domain names might generate paths that are too long
to be created. This follows what other parts of the code do as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1453194
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We always truncated the name at 20 bytes instead of characters. In
case 20 bytes were in the middle of a multi-byte character, then the
string became invalid and various parts of the code would error
out (e.g. XML parsing of that string). Let's instead properly
truncate it after 20 characters instead.
We cannot test this in our test suite because we would need to know
what locales are installed on the system where the tests are ran and
if there is supported one (most probably there will be, but we cannot
be 100% sure), we could initialize gettext in qemuxml2argvtest, but
there would still be a chance of getting two different (both valid,
though) results.
In order to test this it is enough to start a machine with a name for
which trimming it after 20 bytes would create invalid sequence (e.g.
1234567890123456789č where č is any multi-byte character). Then start
the domain and restart libvirtd. The domain would disappear because
such illegal sequence will not go through the XML parser. And that's
not a bug of the parser, it should not be in the XML in the first
place, but since we don't use any sophisticated formatter, just
mash some strings together, the formatting succeeds.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1448766
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The reconnect attribute for chardev devices in QEMU is used to
configure the reconnect timeout in seconds. Setting '0' value disables
the reconnect functionality thus we don't allow to set '0' for QEMU.
To disable the reconnect user should use <reconnect enabled='no'/>.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1254971
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This reverts commit 92840eb3a7.
More recent reviews/changes don't have the vir*ObjNew APIs
consuming the @def, so remove from Interface as well. Changes
needed to also deal with conflicts from commit id '46f5eca4'.
Signed-off-by: John Ferlan <jferlan@redhat.com>
3 out of 4 uses of gl_WARN_ADD() were incorrectly adding "" around
the argument, which in turn resulted in the argument being used
unquoted (configure had gl_positive=""-fstack-protector-all"",
rather than the intended gl_positive="-fstack-protector-all").
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit 94c465d0 refactored the logging setup phase but introduced an
issue, where the daemon ignores verbose mode when there are no outputs
defined and the default must be used. The problem is that the default
output was determined too early, thus ignoring the potential '--verbose'
option taking effect. This patch postpones the creation of the default
output to the very last moment when nothing else can change. Since the
default output is only created during the init phase, it's safe to leave
the pointer as NULL for a while, but it will be set eventually, thus not
affecting runtime.
Patch also adjusts both the other daemons.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1442947
Signed-off-by: Erik Skultety <eskultet@redhat.com>
We can't retrieve the isolation group of a device that's not present
in the system. However, it's very common for VFs to be created late
in the boot, so they might not be present yet when libvirtd starts,
which would cause the guests using them to disappear.
Moreover, for other architectures and even ppc64 before isolation
groups were introduced, it's considered perfectly fine to configure a
guest to use a device that's not yet (or no longer) available to the
host, with the obvious caveat that such a guest won't be able to
start before the device is available.
In order to be consistent, when a device's isolation group can't be
determined fall back to not isolating it rather than erroring out or,
worse, making the guest disappear.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1484254
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
While formatting disk or chardev element they both uses
virDomainDiskSourceDefFormatSeclabel() function which also closes
the source element. This is not extendable.
Use the new virXMLFormatElement() to properly format the source
element with possible child elements.
As a side effect it fixes a bug in disk source formatting.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This helper allows you to better structurize the code if some element
may or may not contains attributes and/or child elements.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This pulls in, among other new things, vc-list-files fix to make
syntax-check work with git worktrees.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
To handle setting a default heads value. Convert callers that were
doing it by hand
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
And into DeviceDefValidate which is the expected place
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The ram/vram = 0 bits aren't needed, and PostParse will fill in the
needed QXL default
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Both of these are dead code: qemu_command.c explicitly rejects
VIRT_XEN earlier in the call chain, and qemu_parse_command.c
will never set VIRT_XEN anymore
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is more user-friendly because the error will be
displayed directly instead of being buried in the log.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Fix the warning generated on PPC by virt-host-validate for IOMMU.
In case of PPC, IOMMU in the host kernel either has it or it's not
compiled in. The /sys/kernel/iommu_groups check is good enough to
verify if it was compiled with the kernel or not.
Modify the error message when "if (sb.st_nlink <= 2)" to indicate
what the problem would be since there would be no @bootarg.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Using a variable named 'stat' clashes with the system function
'stat()' causing compiler warnings on some platforms:
libxl/libxl_driver.c: In function 'libxlDomainBlockStatsVBD':
libxl/libxl_driver.c:5387: error: declaration of 'stat' shadows a global declaration [-Wshadow]
/usr/include/sys/stat.h:455: error: shadowed declaration is here [-Wshadow]
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This pulls in, among other new things, vc-list-files fix to make
syntax-check work with git worktrees.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When parsing the config, we look for the SCSI controllers one by one,
remembering their models, then let virDomainDefAddImplicitDevices
add them if any SCSI disk is using them.
Since these controllers are not really implicit (they are present
in the source config), add them explicitly.
This patch maintains the behavior of not adding a controller
if it was present in the config, but no disk was using it.
This also resolves the memory leak of virVMXParseConfig overwriting
the video device added by calling virDomainDefAddImplicitDevices
before the parsing is finished.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
For selected hostdev types, we validate that the address type
matches the subsystem type when parsing the XML.
Move it to the validation phase, to allow extending the checks
to other subsystem types without making existing domains disappear.
At the time the check was written virtuozzo did not use disabled items in boot
order configuration. Boot items were always enabled. Now they can be disabled
as well. Supporting such items is easy - they just should be ignored.
HTML5 obsoletes the 'name' attribute in favor of 'id',
and our TOC generator apparently follows the recommendation
to the letter, resulting in a broken TOC if you use the
old-school attribute.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>