This reverts commit 92840eb3a7.
More recent reviews/changes don't have the vir*ObjNew APIs
consuming the @def, so remove from Interface as well. Changes
needed to also deal with conflicts from commit id '46f5eca4'.
Signed-off-by: John Ferlan <jferlan@redhat.com>
3 out of 4 uses of gl_WARN_ADD() were incorrectly adding "" around
the argument, which in turn resulted in the argument being used
unquoted (configure had gl_positive=""-fstack-protector-all"",
rather than the intended gl_positive="-fstack-protector-all").
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit 94c465d0 refactored the logging setup phase but introduced an
issue, where the daemon ignores verbose mode when there are no outputs
defined and the default must be used. The problem is that the default
output was determined too early, thus ignoring the potential '--verbose'
option taking effect. This patch postpones the creation of the default
output to the very last moment when nothing else can change. Since the
default output is only created during the init phase, it's safe to leave
the pointer as NULL for a while, but it will be set eventually, thus not
affecting runtime.
Patch also adjusts both the other daemons.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1442947
Signed-off-by: Erik Skultety <eskultet@redhat.com>
We can't retrieve the isolation group of a device that's not present
in the system. However, it's very common for VFs to be created late
in the boot, so they might not be present yet when libvirtd starts,
which would cause the guests using them to disappear.
Moreover, for other architectures and even ppc64 before isolation
groups were introduced, it's considered perfectly fine to configure a
guest to use a device that's not yet (or no longer) available to the
host, with the obvious caveat that such a guest won't be able to
start before the device is available.
In order to be consistent, when a device's isolation group can't be
determined fall back to not isolating it rather than erroring out or,
worse, making the guest disappear.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1484254
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
While formatting disk or chardev element they both uses
virDomainDiskSourceDefFormatSeclabel() function which also closes
the source element. This is not extendable.
Use the new virXMLFormatElement() to properly format the source
element with possible child elements.
As a side effect it fixes a bug in disk source formatting.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This helper allows you to better structurize the code if some element
may or may not contains attributes and/or child elements.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This pulls in, among other new things, vc-list-files fix to make
syntax-check work with git worktrees.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
To handle setting a default heads value. Convert callers that were
doing it by hand
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
And into DeviceDefValidate which is the expected place
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The ram/vram = 0 bits aren't needed, and PostParse will fill in the
needed QXL default
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Both of these are dead code: qemu_command.c explicitly rejects
VIRT_XEN earlier in the call chain, and qemu_parse_command.c
will never set VIRT_XEN anymore
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is more user-friendly because the error will be
displayed directly instead of being buried in the log.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Fix the warning generated on PPC by virt-host-validate for IOMMU.
In case of PPC, IOMMU in the host kernel either has it or it's not
compiled in. The /sys/kernel/iommu_groups check is good enough to
verify if it was compiled with the kernel or not.
Modify the error message when "if (sb.st_nlink <= 2)" to indicate
what the problem would be since there would be no @bootarg.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Using a variable named 'stat' clashes with the system function
'stat()' causing compiler warnings on some platforms:
libxl/libxl_driver.c: In function 'libxlDomainBlockStatsVBD':
libxl/libxl_driver.c:5387: error: declaration of 'stat' shadows a global declaration [-Wshadow]
/usr/include/sys/stat.h:455: error: shadowed declaration is here [-Wshadow]
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This pulls in, among other new things, vc-list-files fix to make
syntax-check work with git worktrees.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When parsing the config, we look for the SCSI controllers one by one,
remembering their models, then let virDomainDefAddImplicitDevices
add them if any SCSI disk is using them.
Since these controllers are not really implicit (they are present
in the source config), add them explicitly.
This patch maintains the behavior of not adding a controller
if it was present in the config, but no disk was using it.
This also resolves the memory leak of virVMXParseConfig overwriting
the video device added by calling virDomainDefAddImplicitDevices
before the parsing is finished.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
For selected hostdev types, we validate that the address type
matches the subsystem type when parsing the XML.
Move it to the validation phase, to allow extending the checks
to other subsystem types without making existing domains disappear.
At the time the check was written virtuozzo did not use disabled items in boot
order configuration. Boot items were always enabled. Now they can be disabled
as well. Supporting such items is easy - they just should be ignored.
HTML5 obsoletes the 'name' attribute in favor of 'id',
and our TOC generator apparently follows the recommendation
to the letter, resulting in a broken TOC if you use the
old-school attribute.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When parsing bootable devices, we maintain a bitmap of used
<boot order=""> elements. Use it in the post-parse function
to figure out whether the user tried to mix per-device and
per-domain boot elements.
This removes the need to count them twice.
These functions contain the post-parse steps common for all drivers.
Rename it to use the 'Common' prefix, instead of the vagueness
of 'Internal', leaving 'Internal' available for other vague uses.
Since the source element is parsed only once for these type of
character devices we don't have to use temporary variable and
check whether the variable was already set.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The extra check whether (connect|bind)(Host|Service) was set is
required because for UDP chardev there can be two source elements.
Without the check there could be a memory leak.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In order to ensure that the default protocol is RAW, explicitly
assigning VIR_DOMAIN_CHR_TCP_PROTOCOL_RAW = 0.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Currently we accept and correctly parse this chardev XML:
...
<channel type='tcp'>
<source mode='connect'/>
<source mode='bind' host='localhost'/>
<source service='4567'/>
<target type='virtio' name='test'/>
</channel>
...
The parsed formatted XML is:
...
<channel type='tcp'>
<source mode='connect' host='localhost' service='4567'/>
<target type='virtio' name='test'/>
</channel>
...
That behavior is super wrong and should not be allowed. If you notice
the current parse takes the first found attribute and uses that value,
so for example from the "<source mode='bind' host='localhost'/>" only
the "host" attribute is used. It works the same way for all possible
attributes that we are able to parse for source element.
This patch enforces providing only one source element for all character
devices, only for UDP type we allow to provide two source elements
since you can specify both modes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
