An upcoming patch will rework virDomainSnapshotObjList to be generic
for both snapshots and checkpoints; reduce the churn by adding a new
accessor virDomainSnapshotObjGetDef() which returns the
snapshot-specific definition even when the list is rewritten to
operate only on a base class, then using it at sites that that are
specific to snapshots. Use VIR_STEAL_PTR when appropriate in the
affected lines.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rather than allowing a leaky abstraction where multiple drivers have
to open-code operations that update the relations in a
virDomainSnapshotObjList, it is better to add accessor functions so
that updates to relations are maintained closer to the internals.
This patch finishes the job started in the previous patch, by getting
rid of all direct access to nchildren, first_child, or sibling outside
of the lowest level functions, making it easier to refactor later on.
The lone new caller to virDomainSnapshotObjListSize() checks for a
return != 0, because it wants to handles errors (-1, only possible if
the hash table wasn't allocated) and existing snapshots (> 0) in the
same manner; we can drop the check for a current snapshot on the
grounds that there shouldn't be one if there are no snapshots.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rather than allowing a leaky abstraction where multiple drivers have
to open-code operations that update the relations in a
virDomainSnapshotObjList, it is better to add accessor functions so
that updates to relations are maintained closer to the internals.
This patch starts the task with a single new function:
virDomainSnapshotMoveChildren(). The logic might not be immediately
obvious [okay, that's an understatement - the existing code uses black
magic ;-)], so here's an overview: The old code has an implicit for
loop around each call to qemuDomainSnapshotReparentChildren() by using
virDomainSnapshotForEachChild() (you'll need a wider context than
git's default of 3 lines to see that); the new code has a more visible
for loop. Then it helps if you realize that the code is making two
separate changes to each child object: STRDUP of the new parent name
prior to writing XML files (unchanged), and touching up the pointer to
the parent object (refactored); the end result is the same whether a
single pass made both changes (both in driver code), or whether it is
split into two passes making one change each (one in driver code, the
other in the new accessor).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It is easier to track the current snapshot as part of the list of
snapshots. In particular, doing so lets us guarantee that the current
snapshot is cleared if that snapshot is removed from the list (rather
than depending on the caller to do so, and risking a use-after-free
problem, such as the one recently patched in 1db9d0efbf). This
requires the addition of several new accessor functions, as well as a
useful return type for virDomainSnapshotObjListRemove(). A few error
handling sites that were previously setting vm->current_snapshot =
NULL can now be dropped, because the previous function call has now
done it already. Also, qemuDomainRevertToSnapshot() was setting the
current vm twice, so keep only the one used on the success path.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rework the logic in qemuDomainSnapshotLoad() to set
vm->current_snapshot only once at the end of the loop, rather than
repeatedly querying it during the loop, to make it easier for the next
patch to use accessor functions rather than direct manipulation of
vm->current_snapshot. When encountering multiple snapshots claiming
to be current (based on the presence of an <active>1</active> element
in the XML, which libvirt only outputs for internal use and not for
any public API), this changes behavior from warning only once and
running with no current snapshot, to instead warning on each duplicate
and selecting the last one encountered (which is arbitrary based on
readdir() ordering, but actually stands a fair chance of being the
most-recently created snapshot whether by timestamp or by the
propensity of humans to name things in ascending order).
Note that the code in question is only run by libvirtd when it first
starts, reading state from disk from the previous run into memory for
this run. Since the data resides somewhere that only libvirt should be
touching (typically /var/lib/libvirt/qemu/snapshot/*), it should be
clean. So in the common case, the code touched here is unreachable.
But if someone is actually messing with files behind libvirt's back,
they deserve the change in behavior.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The only use for the 'current' member of virDomainSnapshotDef was with
the PARSE/FORMAT_INTERNAL flag for controlling an internal-use
<active> element marking whether a particular snapshot definition was
current, and even then, only by the qemu driver on output, and by qemu
and test driver on input. But this duplicates vm->snapshot_current,
and gets in the way of potential simplifications to have qemu store a
single file for all snapshots rather than one file per snapshot. Get
rid of the member by adding a bool* parameter during parse (ignored if
the PARSE_INTERNAL flag is not set), and by adding a new flag during
format (if FORMAT_INTERNAL is set, the value printed in <active>
depends on the new FORMAT_CURRENT).
Then update the qemu driver accordingly, which involves hoisting
assignments to vm->current_snapshot to occur prior to any point where
a snapshot XML file is written (although qemu kept
vm->current_snapshot and snapshot->def_current in sync by the end of
the function, they were not always identical in the middle of
functions, so the shuffling gets a bit interesting). Later patches
will clean up some of that confusing churn to vm->current_snapshot.
Note: even if later patches refactor qemu to no longer use
FORMAT_INTERNAL for output (by storing bulk snapshot XML instead), we
will always need PARSE_INTERNAL for input (because on upgrade, a new
libvirt still has to parse XML left from a previous libvirt).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When a future patch converts virDomainSnapshotDef to be a virObject,
we need to be careful that converting VIR_FREE() to virObjectUnref()
does not result in double frees. Reorder the assignment of def into
the object to the point after object is in the hash table (as
otherwise the virHashAddEntry() error path would have a shot at
freeing def prematurely).
Suggested-by: John Ferlan <ferlan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Change the return value of virDomainSnapshotObjListParse() to return
the number of snapshots imported, and allow a return of 0 (the
original proposal of adding a flag to virDomainSnapshotCreateXML
required returning an arbitrary non-NULL snapshot, but that idea was
abandoned; and by returning a count, we are no longer constrained to a
non-empty list).
Document which flags are supported (namely, just SECURE) in
virDomainSnapshotObjListFormat().
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
An upcoming patch will be reworking virDomainSnapshotDef to have a
base class; minimize the churn by using a local variable to reduce the
number of dereferences required when acessing the domain definition
associated with the snapshot.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
And adjust virQEMUCapsSetList to use it. It will also be used in future
patches.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The following virsh command was triggering a use-after-free:
$ virsh -c test:///default '
snapshot-create-as test s1
snapshot-create-as test s2
snapshot-delete --children-only test s1
snapshot-current --name test'
Domain snapshot s1 created
Domain snapshot s2 created
Domain snapshot s1 children deleted
error: name in virGetDomainSnapshot must not be NULL
I got lucky on that run - although the error message is quite
unexpected. On other runs, I was able to get a core dump, and
valgrind confirms there is a definitive problem.
The culprit? We were inconsistent about whether we set
vm->current_snapshot, snap->def->current, or both when updating how
the current snapshot was being tracked. As a result, deletion did not
see that snapshot s2 was previously current, and failed to update
vm->current_snapshot, so that the next API using the current snapshot
failed because it referenced stale memory for the now-gone s2 (instead
of the intended s1).
The test driver code was copied from the qemu code (which DOES track
both pieces of state everywhere), but was purposefully simplified
because the test driver does not have to write persistent snapshot
state to the file system. But when you realize that the only reason
snap->def->current needs to exist is when writing out one file per
snapshot for qemu, it's just as easy to state that the test driver
never has to mess with the field (rather than chasing down which
places forgot to set the field), and have vm->current_snapshot be the
sole source of truth in the test driver.
Ideally, I'd get rid of the 'current' member in virDomainSnapshotDef,
as well as the 'current_snapshot' member in virDomainDef, and instead
track the current member in virDomainSnapshotObjList, coupled with
writing ALL snapshot state for qemu in a single file (where I can use
<snapshots current='...'> as a wrapper, rather than
VIR_DOMAIN_SNAPSHOT_FORMAT_INTERNAL to output <current>1</current> XML
on a per-snapshot file basis). But that's a bigger change, so for now
I'm just patching things to avoid the test driver segfault.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1686927
When trying to create a nwfilter binding via
nwfilterBindingCreateXML() we may encounter a crash. The sequence
of functions called is as follows:
1) nwfilterBindingCreateXML() parses the XML and calls
virNWFilterBindingObjListAdd() which calls
virNWFilterBindingObjListAddLocked()
2) Here, @binding is not found because binding->remove is set.
3) Therefore, controls continue with creating new @binding,
setting its def to the one from 1) and adding it to the hash
table.
4) This fails, because the binding is still in the hash table
(duplicate key is detected).
5) The control jumps to 'error' label where
virNWFilterBindingObjEndAPI() is called which frees the binding
definition passed.
6) Error is propagated to the caller, which calls
virNWFilterBindingDefFree() over the definition again.
The solution is to unset binding->def in case of failure so it's
not freed in step 5).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Storage source private data can be parsed along with other components of
private data rather than a separate function which is called from
multiple places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDomainDiskSourcePrivateDataParse and virDomainDiskSourcePRParse don't
need the 'cleanup' label any more thanks to VIR_XPATH_NODE_AUTORESTORE.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function does not have any code in the 'cleanup' label so we can
simplify the control flow.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use our VIR_AUTOPTR machinery also for libxml2's xmlDoc and
xmlXPathContext.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a1c453dc088, during VIR_AUTOFREE() rewrite this wasn't done
properly. @port might be leaked because it's allocated in a for()
loop.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In 669018bc9cb I've introduced def->refresh which might be
allocated by virStoragePoolDefRefreshParse() but is never freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The refresh_volume_allocation variable in
virStoragePoolDefParseXML() has been unused since its
introduction in commit 669018bc9cb1, and Clang rightfully
complains about this fact.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Use the new refresh volume allocation pool override to skip
computing the actual volume usage if disabled.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The new 'refresh' element can override the default refresh operations
for a storage pool. The only currently supported override is to set
the volume allocation size to the volume capacity. This can be specified
by adding the following snippet:
<pool>
...
<refresh>
<volume allocation='capacity'/>
</refresh>
...
</pool>
This is useful for certain backends where computing the actual allocation
of a volume might be an expensive operation.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The librbd API will transparently revert to a slow disk usage
calculation method if the fast-diff map is marked as invalid.
Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The unprivileged libvirtd does not have permission to create firewall
rules, or bridge devices, or do anything to the host network in
general. Historically we still activate the network driver though and
let the network start API call fail.
The startup code path which reloads firewall rules on active networks
would thus effectively be a no-op when unprivileged as it is impossible
for there to be any active networks
With the change to use a global set of firewall chains, however, we now
have code that is run unconditionally.
Ideally we would not register the network driver at all when
unprivileged, but the entanglement with the virt drivers currently makes
that impractical. As a temporary hack, we just make the firewall reload
into a no-op.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
During startup libvirtd creates top level chains for both ipv4
and ipv6 protocols. If this fails for any reason then startup
of virtual networks is blocked.
The default virtual network, however, only requires use of ipv4
and some servers have ipv6 disabled so it is expected that ipv6
chain creation will fail. There could equally be servers with
no ipv4, only ipv6.
This patch thus makes error reporting a little more fine grained
so that it works more sensibly when either ipv4 or ipv6 is
disabled on the server. Only the protocols that are actually
used by the virtual network have errors reported.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
During startup we create some top level chains in which all
virtual network firewall rules will be placed. The upfront
creation is done to avoid slowing down creation of individual
virtual networks by checking for chain existance every time.
There are some factors which can cause this upfront creation
to fail and while a message will get into the libvirtd log
this won't be seen by users who later try to start a virtual
network. Instead they'll just get a message saying that the
libvirt top level chain does not exist. This message is
accurate, but unhelpful for solving the root cause.
This patch thus saves any error during daemon startup and
reports it when trying to create a virtual network later.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The rbd_list method has been deprecated in Ceph >= 14.0.0
in favour of the new rbd_list2 method which populates an
array of structs.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The rbd_list method has a quite unpleasant signature returning an
array of strings in a single buffer instead of an array. It is
being deprecated in favour of rbd_list2. To maintain clarity of
code when supporting both APIs in parallel, split the rbd_list
code out into a separate method.
In splitting this we now honour the rbd_list failures.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
After this, newly added enums will not automatically show up in
driver output unless the driver code specifically sets report=true
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Set report=true for all enums currently formatted in the XML
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Set report=true for all enums currently formatted in the XML
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Set report=true for all enums currently formatted in the XML
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
virCapsEnum report is an internal bool indicating whether we
should format the enum in the XML at all. This is unused for
now but will be handled in future patches.
We use a plain bool instead of tristate because the case here
is a bit different than the explicit @supported output. We
already report the equivalent of supported=YES|NO based on
what enum values are filled in. This adds report=false to
handle the ABSENT case.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Change domcaps to skip formatting XML if the default
TRISTATE_BOOL_ABSENT is found. Now when domcaps is extended, driver
XML output won't change until an explicit TRISTATE_BOOL value is set
in driver code.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<hostdev> and <features> are not supported. <loader>, <graphics>,
and <video> are supported conditionally
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
None of the <feature> bits are supported, and the <loader> piece
is only conditionally supported
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Only gic->supported needs an explicit BOOL_NO setting, all other
'supported' values are handling things correctly
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Switch most 'supported' handling to use virTristateBool, so eventually
we can handle the ABSENT state.
For now the XML formatter treats ABSENT the same as FALSE, so there's
no functional output change. This will be addressed in later patches
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Similar to the macros we have for formatting enums, add a macro to
simplify formatting the pattern:
<FOO supported='yes|no'/>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
In 0eca80e60 _class was renamed to klass for variety of struct
members. However, gather_usb_cap() was missed out in this rename
leaving FreeBSD build broken.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This code originates from:
commit d0aa10fdd6c108ad442886e4451b2629a3dc8b86
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Tue Mar 3 12:03:44 2009 +0000
QEMU security driver usage for sVirt support (James Morris, Dan Walsh, Daniel Berrange)
Originally in the qemudDomainGetSecurityLabel function. It doesn't
appear to have done anything useful back then either. The other two
instances look like copy+paste
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
In d16f803d780 we've tried to solve an issue that after wiping an
image its format might have changed (e.g. from qcow2 to raw) but
libvirt wasn't probing the image format. We fixed this by calling
virStorageBackendRefreshVolTargetUpdate() which is what
refreshPool() would end up calling. But this shortcut is not good
enough because the function is called only for local types of
volumes (like dir, fs, netfs). But now that more backends support
volume wiping we have to call the function with more caution.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
So far we have two branches: either we zero BLOCK_PER_PACKET
(currently 128) block at once, or if we're close to the last block
then we zero out one block at the time. This is very suboptimal.
We know how many block are there left. Might as well just write
them all at once.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This info can be useful to filter devices visible
to mgmt clients so that they won't see devices that
unsafe/not meaningful to pass thru.
Provide class info the way it is provided by udev or
kernel that is as single 6-digit hexadecimal.
Class element is not optional. I guess this should not
break users that use virNodeDeviceCreateXML because
they probably specify only scsi_host capability on
input and then node device driver gets other capabilities
from udev after device appeared.
HAL driver does not get support for the new element in
this patch.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Vim treats *.h files as cpp ones with respect to syntax highlighting.
Thus "class" in _virNodeDevCapPCIDev highlighted mistakenly.
This can be fixed by filetype detection code tunables but it
is more convinient to skip this tuning by every project member.
Let's just use "klass" as field name instead of _class or class
and add syntax rule.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit [1] moved snapshot list functions declaration into
its own file but missed a fix for vz driver.
[1] 9b75154c : snapshot: Break out virDomainSnapshotObjList into its own file
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
If pool refresh failed, then the internal table of volumes is
probably left in inconsistent or incomplete state anyways. Clear
it out then. This has an advantage that we can move the
virStoragePoolObjClearVols() from those very few backends that
do call it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is a wrapper over refreshPool() call as at all places we are
doing basically the same. Might as well have a single function to
call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In bf5cf610f206d5d54 I've fixed a problem where iscsi-direct
backend was reporting only the last LUN. The fix consisted of
moving virStoragePoolObjClearVols() one level up. However, as it
turns out, storage driver already calls it before calling
refreshPool callback (which is
virStorageBackendISCSIDirectRefreshPool() in this case).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
