Commit Graph

1224 Commits

Author SHA1 Message Date
Jiri Denemark
855f768996 qemu: Correctly label migration TCP socket 2011-08-26 11:52:54 +02:00
Jiri Denemark
4c85d96f27 security: Rename SetSocketLabel APIs to SetDaemonSocketLabel
The APIs are designed to label a socket in a way that the libvirt daemon
itself is able to access it (i.e., in SELinux the label is virtd_t based
as opposed to svirt_* we use for labeling resources that need to be
accessed by a vm). The new name reflects this.
2011-08-26 11:51:09 +02:00
Eric Blake
6766ff10dd snapshot: track current snapshot across restarts
Audit all changes to the qemu vm->current_snapshot, and make them
update the saved xml file for both the previous and the new
snapshot, so that there is always at most one snapshot with
<active>1</active> in the xml, and that snapshot is used as the
current snapshot even across libvirtd restarts.

This patch does not fix the case of virDomainSnapshotDelete(,CHILDREN)
where one of the children is the current snapshot; that will be later.

* src/conf/domain_conf.h (_virDomainSnapshotDef): Alter member
type and name.
* src/conf/domain_conf.c (virDomainSnapshotDefParseString)
(virDomainSnapshotDefFormat): Update clients.
* docs/schemas/domainsnapshot.rng: Tighten rng.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad): Reload current
snapshot.
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainSnapshotDiscard): Track current snapshot.
2011-08-25 15:11:03 -06:00
Eric Blake
5e47785b85 snapshot: only pass snapshot to qemu command line when reverting
Changing the current vm, and writing that change to the file
system, all before a new qemu starts, is risky; it's hard to
roll back if starting the new qemu fails for some reason.
Instead of abusing vm->current_snapshot and making the command
line generator decide whether the current snapshot warrants
using -loadvm, it is better to just directly pass a snapshot all
the way through the call chain if it is to be loaded.

This frees up the last use of snapshot->def->active for qemu's
use, so the next patch can repurpose that field for tracking
which snapshot is current.

* src/qemu/qemu_command.c (qemuBuildCommandLine): Don't use active
field of snapshot.
* src/qemu/qemu_process.c (qemuProcessStart): Add a parameter.
* src/qemu/qemu_process.h (qemuProcessStart): Update prototype.
* src/qemu/qemu_migration.c (qemuMigrationPrepareAny): Update
callers.
* src/qemu/qemu_driver.c (qemudDomainCreate)
(qemuDomainSaveImageStartVM, qemuDomainObjStart)
(qemuDomainRevertToSnapshot): Likewise.
(qemuDomainSnapshotSetCurrentActive)
(qemuDomainSnapshotSetCurrentInactive): Delete unused functions.
2011-08-25 15:07:57 -06:00
Eric Blake
861dc84bb5 snapshot: don't leak resources on qemu snapshot failure
https://bugzilla.redhat.com/show_bug.cgi?id=727709
mentions that if qemu fails to create the snapshot (such as what
happens on Fedora 15 qemu, which has qmp but where savevm is only
in hmp, and where libvirt is old enough to not try the hmp fallback),
then 'virsh snapshot-list dom' will show a garbage snapshot entry,
and the libvirt internal directory for storing snapshot metadata
will have a bogus file.

This fixes the fallout bug of polluting the snapshot-list with
garbage on failure (the root cause of the F15 bug of not having
fallback to hmp has already been fixed in newer libvirt releases).

* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Allocate
memory before making snapshot, and cleanup on failure.  Don't
dereference NULL if transient domain exited during snapshot creation.
2011-08-25 14:01:36 -06:00
Alex Jia
d69d321086 qemu: avoid dead store in doPeer2PeerMigrate3
* src/qemu/qemu_migration.c: avoid dead 'ret' assignment and silence
  clang warning.

Detected by ccc-analyzer:

  CC     libvirt_driver_qemu_la-qemu_migration.lo
qemu/qemu_migration.c:2046:5: warning: Value stored to 'ret' is never read
    ret = qemuMigrationConfirm(driver, sconn, vm,
    ^     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2011-08-25 13:28:08 -06:00
Shradha Shah
7ae740fcb1 qemu: fix off-by-one in pci slot reservation
Signed-off-by: Steve Hodgson <shodgson@solarflare.com>
2011-08-24 10:49:02 -06:00
Shradha Shah
c0f025b8ba pci: fix pciDeviceListSteal on multiple devices
pciDeviceListSteal(pcidevs, dev) removes dev from pcidevs reducing
the length of pcidevs, so moving onto what was the next dev is wrong.

Instead callers should pop entry 0 repeatedly until pcidevs is empty.

Signed-off-by: Steve Hodgson <shodgson@solarflare.com>
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-08-24 10:31:29 -06:00
Osier Yang
10b100240f qemu: Report error if qemu monitor command not found for BlockJob
* src/qemu/qemu_monitor_json.c: Handle error "CommandNotFound" and
  report the error.

* src/qemu/qemu_monitor_text.c: If a sub info command is not found,
  it prints the output of "help info", for other commands,
  "unknown command" is printed.

Without this patch, libvirt always report:

  An error occurred, but the cause is unknown

This patch was adapted from a patch by Osier Yang <jyang@redhat.com> to
break out detection of unrecognized text monitor commands into a separate
function.

Signed-off-by: Adam Litke <agl@us.ibm.com>
2011-08-24 14:39:42 +08:00
Eric Blake
3a52b864dd maint: fix comment typos
* src/qemu/qemu_driver.c (qemuDomainSaveInternal): Fix typo.
* src/conf/domain_event.c (virDomainEventDispatchMatchCallback):
Likewise.
* daemon/libvirtd.c (daemonRunStateInit): Likewise.
* src/lxc/lxc_container.c (lxcContainerChildMountSort): Likewise.
* src/util/virterror.c (virCopyError, virRaiseErrorFull): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxprSound): Likewise.
2011-08-23 11:31:28 -06:00
Osier Yang
4340b3ba40 qemu: Cleanup improper VIR_ERR_NO_SUPPORT use
* src/qemu/qemu_command.c: s/VIR_ERR_NO_SUPPORT/VIR_ERR_CONFIG_UNSUPPORTED/

* src/qemu/qemu_driver.c: s/VIR_ERR_NO_SUPPORT/VIR_ERR_OPERATION_INVALID/

* src/qemu/qemu_process.c: s/VIR_ERR_NO_SUPPORT/VIR_ERR_OPERATION_INVALID/
2011-08-23 16:23:10 +08:00
Osier Yang
825d91cd31 qemu: Substitute VIR_ERR_NO_SUPPORT with VIR_ERR_OPERATION_INVALID
* src/qemu/qemu_monitor_text.c: Error like "this function is not
supported by the connection driver" is confused obviously.
2011-08-23 14:59:16 +08:00
Eric Blake
d89dd42d51 maint: simplify lots of libxml2 clients
Repetitive patterns should be factored.  The sign of a good
factorization is a change that kills 5x more lines than it adds :)

* src/conf/domain_conf.c (virDomainDeviceDefParse)
(virDomainSnapshotDefParseString): Use new convenience macros.
* src/conf/storage_conf.c (virStoragePoolDefParseSourceString):
Likewise.
* src/cpu/cpu.c (cpuCompareXML, cpuBaselineXML): Likewise.
* src/esx/esx_vi.c (esxVI_Context_Execute): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationCookieXMLParseStr):
Likewise.
* src/security/virt-aa-helper.c (caps_mockup): Likewise.
* src/test/test_driver.c (testOpenFromFile): Likewise.
* tests/cputest.c (cpuTestLoadXML, cpuTestLoadMultiXML):
Likewise.
* tools/virsh.c (cmdFreecell, makeCloneXML, cmdVNCDisplay)
(cmdTTYConsole, cmdDetachInterface, cmdDetachDisk)
(cmdSnapshotCreate, cmdSnapshotCreateAs, cmdSnapshotCurrent)
(cmdSnapshotList, cmdSnapshotParent): Likewise.
2011-08-19 09:13:55 -06:00
Osier Yang
aaa93ab6fa qemu: Allow to undefine a running domain 2011-08-19 21:49:37 +08:00
Osier Yang
4ffa7530a4 qemu: Get memory balloon info correctly for text monitor
* src/qemu/qemu_monitor_text.c: BALLOON_PREFIX was defined as
"balloon: actual=", which cause "actual=" is stripped early before
the real parsing. This patch changes BALLOON_PREFIX into "balloon: ",
and modifies related functions, also renames
"qemuMonitorParseExtraBalloonInfo" to "qemuMonitorParseBalloonInfo",
as after the changing, it parses all the info returned by "info balloon".
2011-08-19 21:34:59 +08:00
Tom Vijlbrief
108ca33357 qemu: disk migration verbose progress
A virsh command like:

migrate --live --copy-storage-all Guest qemu+ssh://user@host/system
--persistent --verbose

shows

Migration: [  0 %]

during the storage copy and does not start counting
until the ram transfer starts

Fix this by scraping optional disk transfer status, and adding it
into the progress meter.
2011-08-17 08:01:12 -06:00
Osier Yang
2ce90ea296 qemu: Init reattaching related members of pciDevice before reattach
Otherwise the device will still be bound to pci-stub driver even
it's set as "managed=yes" when do detaching. Of course, it won't
triger any driver reprobing too.
2011-08-17 20:58:33 +08:00
Laine Stump
73c0a148af qemu: support event_idx parameter for virtio disk and net devices
In some versions of qemu, both virtio-blk-pci and virtio-net-pci
devices can have an event_idx setting that determines some details of
event processing. When it is enabled, it "reduces the number of
interrupts and exits for the guest". qemu will automatically enable
this feature when it is available, but there may be cases where this
new feature could actually make performance worse (NB: no such case
has been found so far).

As a safety switch in case such a situation is encountered in the
field, this patch adds a new attribute "event_idx" to the <driver>
element of both disk and interface devices. event_idx can be set to
"on" (to force event_idx on in case qemu has it disabled by default)
or "off" (for force event_idx off). In the case that event_idx support
isn't present in qemu, the attribute is ignored (this on the advice of
the qemu developer).

docs/formatdomain.html.in: document the new flag (marking it as
   "don't mess with this!"
docs/schemas/domain.rng: add event_idx in appropriate places
src/conf/domain_conf.[ch]: add event_idx to parser and formatter
src/libvirt_private.syms: export
   virDomainVirtioEventIdx(From|To)String
src/qemu/qemu_capabilities.[ch]: detect and report event_idx in
   disk/net
src/qemu/qemu_command.c: add event_idx parameter to qemu commandline
    when appropriate.
tests/qemuxml2argvdata/qemuxml2argv-event_idx.args,
tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml,
tests/qemuxml2argvtest.c,
tests/qemuxml2xmltest.c: test cases for event_idx.
2011-08-15 09:35:42 -04:00
Peter Krempa
d17101e011 qemu: error message should show uri instead of (null)
Fix pointer for error message uri if domain migration fails.

BZ# 730244
2011-08-15 15:30:03 +02:00
Jiri Denemark
3261761794 qemu: Use fd: protocol for migration
By opening a connection to remote qemu process ourselves and passing the
socket to qemu we get much better errors than just "migration failed"
when the connection is opened by qemu.
2011-08-15 15:21:31 +02:00
Jiri Denemark
e8989ae4e2 qemu: Use virNetSocket for tunneled migration 2011-08-15 15:21:31 +02:00
Jiri Denemark
52e2918ae1 qemu: Refactor do{Tunnel,Native}Migrate functions
The core of these two functions is very similar and most of it is even
exactly the same. Factor out the core functionality into a separate
function to remove code duplication and make further changes easier.
2011-08-15 15:21:31 +02:00
Daniel P. Berrange
f80a4ed77a Move pidfile functions into util/virpidfile.{c,h}
The functions for manipulating pidfiles are in util/util.{c,h}.
We will shortly be adding some further pidfile related functions.
To avoid further growing util.c, this moves the pidfile related
functions into a dedicated virpidfile.{c,h}. The functions are
also all renamed to have 'virPidFile' as their name prefix

* util/util.h, util/util.c: Remove all pidfile code
* util/virpidfile.c, util/virpidfile.h: Add new APIs for pidfile
  handling.
* lxc/lxc_controller.c, lxc/lxc_driver.c, network/bridge_driver.c,
  qemu/qemu_process.c: Add virpidfile.h include and adapt for API
  renames
2011-08-12 20:37:00 +01:00
Eric Blake
398ce48d5c qemu: silence clang false positive
Our logic throws off analyzer tools:

ptr var = NULL;
if (flags == 0) flags = live ? _LIVE : _CONFIG;
if (flags & _LIVE) do stuff
if (flags & _CONFIG) var = non-null;
if (flags & _LIVE) do more stuff
else if (flags & _CONFIG) use var

the tools keep thinking that var can still be NULL in the last
if clause, adding the hint shuts them up.

* src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters): Add a
static analysis hint.
2011-08-11 13:04:25 -06:00
Cole Robinson
d30d572650 qemu: Fix -chardev udp if parameters are omitted
The following XML:

    <serial type='udp'>
      <source mode='connect' service='9999'/>
    </serial>

is accepted by domain_conf.c but maps to the qemu command line:

-chardev udp,host=127.0.0.1,port=2222,localaddr=(null),localport=(null)

qemu can cope with everything omitting except the connection port, which
seems to also be the intent of domain_conf validation, so let's not
generate bogus command lines for that case.
The defaults are empty strings for addresses and 0 for the localport

Additionally, tweak the qemu cli parsing to handle omitted host
parameters
for -serial udp
2011-08-11 15:19:51 +08:00
Eric Blake
0de75e855b managedsave: prohibit use on transient domains
Transient domains reject attempts to set autostart, and using
virDomainCreate to restart a domain only works on persistent
domains.  Therefore, managed save makes no sense on transient
domains, and should be rejected up front rather than creating
an otherwise unrecoverable managed save file.

Besides, transient domains imply that a lot more management is
being done by the upper layer; this includes the assumption
that the upper layer is okay managing the saved state file
created by virDomainSave, and does not need to use managed save.

* src/libvirt.c: Document that transient domains are incompatible
with managed save.
* src/qemu/qemu_driver.c (qemuDomainManagedSave): Enforce it.
* src/libxl/libxl_driver.c (libxlDomainManagedSave): Likewise.
2011-08-10 21:50:02 -06:00
Eric Blake
cdbb27e3bb qemu: minor formatting cleanup
I noticed some inconsistent use of 'else'.

* src/qemu/qemu_driver.c (qemuCPUCompare)
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainSnapshotDiscard): Match coding conventions.
2011-08-10 09:21:56 -06:00
Philipp Hahn
839a5295ef Fix memory leak while scanning snapshots
If a snapshot with the name already exists, virDomainSnapshotAssignDef()
just returns NULL, in which case the snapshot definition is leaked.
Currently this leak is not a big problem, since qemuDomainSnapshotLoad()
is only called once during initial startup of libvirtd.

Signed-off-by: Philipp Hahn <hahn@univention.de>
2011-08-09 10:13:33 -06:00
Jiri Denemark
63e4af45f2 qemu: Avoid overwriting errors from virGetHostname 2011-08-05 18:36:14 +02:00
Eric Blake
5ef1b6c54a qemu: avoid crash on process attach
Detected by ccc-analyzer, reported by Alex Jia.

qemuProcessStart always calls qemuProcessWaitForMonitor with a
non-negative position, but qemuProcessAttach always calls with -1.
In the latter case, there is no log file we can scrape, so we
also should not be trying to scrape the logs if the qemu process
died at the very end.

* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Don't try
to read from log in qemuProcessAttach case.
2011-08-04 14:18:14 -06:00
Alex Jia
2c4d7b5fa4 qemu: avoid dead store in qemuMonitorTextBlockJob
Value stored to 'ret' is never read, so remove this dead assignment.

* src/qemu/qemu_monitor_text.c: kill dead assignment.

Signed-off-by: Alex Jia <ajia@redhat.com>
2011-08-04 08:09:31 -06:00
Alex Jia
2280447962 qemu: avoid dead store in qemuProcessStart
Value stored to 'ret' is never read, in fact, 'cleanup' section will
directly return -1 when function is fail, so remove this dead assignment.

* src/qemu/qemu_process.c: kill dead assignment.

Signed-off-by: Alex Jia <ajia@redhat.com>
2011-08-04 08:02:31 -06:00
Eric Blake
f768b4c3e9 qemu: silence coverity false positives
Coverity gets confused by our logic.  Add some hints to silence
false positives.

* src/qemu/qemu_driver.c (qemudDomainGetVcpuPinInfo): Add hint.
(qemuDomainGetMemoryParameters): Likewise.
2011-08-02 16:45:23 -06:00
Eric Blake
2ea9409a88 qemu: avoid memory leaks
Quite a few leaks detected by coverity.  For chr, the leaks were
close enough to the allocations to plug in place; for disk, the
leaks were separated from the allocation by enough other lines with
intermediate failure cases that I refactored the cleanup instead.

* src/qemu/qemu_command.c (qemuParseCommandLine): Plug leaks.
2011-08-02 16:33:46 -06:00
Eric Blake
0c1813f4c9 qemu: plug child process leak on domain core dump
Detected by Coverity.  Leak introduced by typo in commit 58e668d2.

* src/qemu/qemu_driver.c (doCoreDump): Use correct function.
2011-08-02 15:10:50 -06:00
Eric Blake
9a87657a31 qemu: remove dead code
Warning detected by Coverity.  No need for the NULL check, and
removing it silences the warning without any semantic change.

* src/qemu/qemu_migration.c (qemuMigrationFinish): All entries to
endjob had non-NULL vm.
2011-08-02 15:10:50 -06:00
Eric Blake
9160573d32 qemu: avoid null deref on block pull error
Coverity detected that 5 of 6 callers of virJSONValueArrayGet checked
for a NULL return; and that by not checking we risk a null deref
during an error.  The error is unlikely since the prior call to
virJSONValueArraySize would probably have already caught any botched
JSON array parse, but better safe than sorry.

* src/qemu/qemu_monitor_json.c (qemuMonitorJSONGetBlockJobInfo):
Check for NULL.
(qemuMonitorJSONExtractPtyPaths): Fix typo.
2011-08-02 15:04:36 -06:00
Eric Blake
00ef048f62 fdstream: drop delete argument
Revert 6a1f5f568f.  Now that libvirt_iohelper takes fds by
inheritance rather than by open() (commit 1eb66479), there is
no longer a race where the parent can unlink() a file prior to
the iohelper open()ing the same file.  From there, it makes
more sense to have the callers both create and unlink, rather
than the caller create and the stream unlink, since the latter
was only needed when iohelper had to do the unlink.

* src/fdstream.h (virFDStreamOpenFile, virFDStreamCreateFile):
Callers are responsible for deletion.
* src/fdstream.c (virFDStreamOpenFileInternal): Don't leak created
file on failure.
(virFDStreamOpenFile, virFDStreamCreateFile): Drop parameter.
* src/lxc/lxc_driver.c (lxcDomainOpenConsole): Update callers.
* src/qemu/qemu_driver.c (qemuDomainScreenshot)
(qemuDomainOpenConsole): Likewise.
* src/storage/storage_driver.c (storageVolumeDownload)
(storageVolumeUpload): Likewise.
* src/uml/uml_driver.c (umlDomainOpenConsole): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainOpenConsole): Likewise.
2011-08-02 14:53:43 -06:00
Eric Blake
440d6b6a0b screenshot: don't unlink bogus file
The previous qemu patch could end up calling unlink(tmp) before
tmp was the name of a valid file (unlinking a fileXXXXXX template
instead), or calling unlink(tmp) twice on success (once here,
and once at the end of the stream).  Meanwhile, vbox also suffered
from the same leaked tmp file bug.

* src/qemu/qemu_driver.c (qemuDomainScreenshot): Don't unlink on
success, or on invalid name.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Don't leak temp file.
2011-08-02 13:10:35 -06:00
Michal Privoznik
d68b97c8a6 qemu: Unlink temporary file on failure
Although virFDStreamOpenFile will unlink it once opened, when we hit
error path, we must unlink it by hand.
2011-08-02 10:21:08 -06:00
Eric Blake
193cd0f3c8 qemu: fix crash when mixing sync and async monitor jobs
Currently, we attempt to run sync job and async job at the same time. It
means that the monitor commands for two jobs can be run in any order.

In the function qemuDomainObjEnterMonitorInternal():
    if (priv->job.active == QEMU_JOB_NONE && priv->job.asyncJob) {
        if (qemuDomainObjBeginNestedJob(driver, obj) < 0)
We check whether the caller is an async job by priv->job.active and
priv->job.asynJob. But when an async job is running, and a sync job is
also running at the time of the check, then priv->job.active is not
QEMU_JOB_NONE. So we cannot check whether the caller is an async job
in the function qemuDomainObjEnterMonitorInternal(), and must instead
put the burden on the caller to tell us when an async command wants
to do a nested job.

Once the burden is on the caller, then only async monitor enters need
to worry about whether the VM is still running; for sync monitor enter,
the internal return is always 0, so lots of ignore_value can be dropped.

* src/qemu/THREADS.txt: Reflect new rules.
* src/qemu/qemu_domain.h (qemuDomainObjEnterMonitorAsync): New
prototype.
* src/qemu/qemu_process.h (qemuProcessStartCPUs)
(qemuProcessStopCPUs): Add parameter.
* src/qemu/qemu_migration.h (qemuMigrationToFile): Likewise.
(qemuMigrationWaitForCompletion): Make static.
* src/qemu/qemu_domain.c (qemuDomainObjEnterMonitorInternal): Add
parameter.
(qemuDomainObjEnterMonitorAsync): New function.
(qemuDomainObjEnterMonitor, qemuDomainObjEnterMonitorWithDriver):
Update callers.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal)
(qemudDomainCoreDump, doCoreDump, processWatchdogEvent)
(qemudDomainSuspend, qemudDomainResume, qemuDomainSaveImageStartVM)
(qemuDomainSnapshotCreateActive, qemuDomainRevertToSnapshot):
Likewise.
* src/qemu/qemu_process.c (qemuProcessStopCPUs)
(qemuProcessFakeReboot, qemuProcessRecoverMigration)
(qemuProcessRecoverJob, qemuProcessStart): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationToFile)
(qemuMigrationWaitForCompletion, qemuMigrationUpdateJobStatus)
(qemuMigrationJobStart, qemuDomainMigrateGraphicsRelocate)
(doNativeMigrate, doTunnelMigrate, qemuMigrationPerformJob)
(qemuMigrationPerformPhase, qemuMigrationFinish)
(qemuMigrationConfirm): Likewise.
* src/qemu/qemu_hotplug.c: Drop unneeded ignore_value.
2011-08-01 09:41:57 -06:00
Alex Jia
c03f7f1358 qemu: fix return value issue
whether or not previous return value is -1, the following codes will be
executed for a inactive guest in src/qemu/qemu_driver.c:
ret = virDomainSaveConfig(driver->configDir, persistentDef);
and if everything is okay, 'ret' is assigned to 0, the previous 'ret'
will be overwritten, this patch will fix this issue.

* src/qemu/qemu_driver.c: avoid return value is overwritten when give a argument
  in out of blkio weight range for a inactive guest.

* how to reproduce?
  % virsh blkiotune ${guestname} --weight 10
  % echo $?

  Note: guest must be inactive, argument 10 in out of blkio weight range,
  and can get a error information by checking libvirtd.log, however,
  virsh hasn't raised any error information, and return value is 0.

  https://bugzilla.redhat.com/show_bug.cgi?id=726304

Signed-off-by: Alex Jia <ajia@redhat.com>
2011-08-01 09:40:13 -06:00
Alex Jia
868453db1e qemu: fix return value issue in qemuDomainSetMemoryParameters
whether or not previous return value is -1, the following codes will be
executed for a inactive guest in qemuDomainSetMemoryParameters:
ret = virDomainSaveConfig(driver->configDir, persistentDef);
and if everything is okay, 'ret' is assigned to 0, the previous 'ret'
will be overwritten, this patch will fix this issue.

* src/qemu/qemu_driver.c: avoid return value is overwritten when set
  min_guarante value to a inactive guest.

* how to reproduce?
  % virsh memtune ${guestname} --min_guarante 1024
  % echo $?

  Note: guest must be inactive, in fact, 'min_guarante' hasn't been implemented
  in memory tunable, and I can get the error when check actual libvirtd.log,
  however, virsh hasn't raised any error information, and return value is 0.

Signed-off-by: Alex Jia <ajia@redhat.com>
2011-08-01 09:21:33 -06:00
Guannan Ren
2f6239d068 Correct the default value of lock_manager in qemu.conf
* src/qemu/qemu.conf: switch back the comment for the default lock
  manager to sanlock
2011-08-01 21:15:46 +08:00
Osier Yang
f362a99a53 qemu: Fix a regression of domjobabort
Introduced by f9a837da73, the condition is not changed after
the else clause is removed. So now it quit with "domain is not
running" when the domain is running. However, when the domain is
not running, it reports "no job is active".

How to reproduce:

1)
% virsh start $domain
% virsh domjobabort $domain
error: Requested operation is not valid: domain is not running

2)
% virsh destroy $domain
% virsh domjobabort $domain
error: Requested operation is not valid: no job is active on the domain

3)
% virsh save $domain /tmp/$domain.save

Before above commands finished, try to abort job in another terminal

% virsh domabortjob $domain
error: Requested operation is not valid: domain is not running
2011-08-01 19:41:07 +08:00
Eric Blake
dd20328fbb conf: make 'vnet' prefix a macro
Using a macro ensures that all the code is looking for the same
prefix.

* src/conf/domain_conf.h (VIR_NET_GENERATED_PREFIX): New macro.
* src/conf/domain_conf.c (virDomainNetDefParseXML): Use it.
* src/uml/uml_conf.c (umlConnectTapDevice): Likewise.
* src/qemu/qemu_command.c (qemuNetworkIfaceConnect): Likewise.
Suggested by Laine Stump.
2011-07-29 16:08:54 -06:00
Eric Blake
f0a5eaf35f save: let qemu driver manipulate save files
The goal here is that save-image-dumpxml fed back to
save-image-define should not change the save file; anywhere that
this is not the case is probably a bug in domain_conf.c.

* src/qemu/qemu_driver.c (qemuDomainSaveImageGetXMLDesc)
(qemuDomainSaveImageDefineXML): New functions.
(qemuDomainSaveImageOpen): Add parameter.
(qemuDomainRestoreFlags, qemuDomainObjRestore): Adjust clients.
2011-07-28 15:39:14 -06:00
Eric Blake
0ea479f8f6 save: support qemu modifying xml on domain save/restore
With this, it is possible to update the path to a disk backing
image on either the save or restore action, without having to
binary edit the XML embedded in the state file.

This also modifies virDomainSave to output a smaller xml (only
the inactive xml, which is all the more virDomainRestore parses),
while still guaranteeing padding for most typical abi-compatible
xml replacements, necessary so that the next patch for
virDomainSaveImageDefineXML will not cause unnecessary
modifications to the save image file.

* src/qemu/qemu_driver.c (qemuDomainSaveInternal): Add parameter,
only use inactive state, and guarantee padding.
(qemuDomainSaveImageOpen): Add parameter.
(qemuDomainSaveFlags, qemuDomainManagedSave)
(qemuDomainRestoreFlags, qemuDomainObjRestore): Update callers.
2011-07-28 15:31:08 -06:00
Laine Stump
99e4b30b39 qemu: support type=network in domain graphics <listen>
The domain XML now understands the <listen> subelement of its
<graphics> element (including when listen type='network'), and the
network driver has an internal API that will turn a network name into
an IP address, so the final logical step is to put the glue into the
qemu driver so that when it is starting up a domain, if it finds
<listen type='network' network='xyz'/> in the XML, it will call the
network driver to get an IPv4 address associated with network xyz, and
tell qemu to listen for vnc (or spice) on that address rather than the
default address (localhost).

The motivation for this is that a large installation may want the
guests' VNC servers listening on physical interfaces rather than
localhost, so that users can connect directly from the outside; this
requires sending qemu the appropriate IP address to listen on. But
this address will of course be different for each host, and if a guest
might be migrated around from one host to another, it's important that
the guest's config not have any information embedded in it that is
specific to one particular host. <listen type='network.../> can solve
this problem in the following manner:

  1) on each host, define a libvirt network of the same name,
     associated with the interface on that host that should be used
     for listening (for example, a simple macvtap network: <forward
     mode='bridge' dev='eth0'/>, or host bridge network: <forward
     mode='bridge'/> <bridge name='br0'/>

  2) in the <graphics> element of each guest's domain xml, tell vnc to
     listen on the network name used in step 1:

     <graphics type='vnc' port='5922'>
       <listen type='network'network='example-net'/>
     </graphics>

(all the above also applies for graphics type='spice').
2011-07-28 13:46:50 -04:00
Laine Stump
ef79fb5b5f conf: add <listen> subelement to domain <graphics> element
Once it's plugged in, the <listen> element will be an optional
replacement for the "listen" attribute that graphics elements already
have. If the <listen> element is type='address', it will have an
attribute called 'address' which will contain an IP address or dns
name that the guest's display server should listen on. If, however,
type='network', the <listen> element should have an attribute called
'network' that will be set to the name of a network configuration to
get the IP address from.

* docs/schemas/domain.rng: updated to allow the <listen> element

* docs/formatdomain.html.in: document the <listen> element and its
  attributes.

* src/conf/domain_conf.[hc]:

  1) The domain parser, formatter, and data structure are modified to
     support 0 or more <listen> subelements to each <graphics>
     element. The old style "legacy" listen attribute is also still
     accepted, and will be stored internally just as if it were a
     separate <listen> element. On output (i.e. format), the address
     attribute of the first <listen> element of type 'address' will be
     duplicated in the legacy "listen" attribute of the <graphic>
     element.

  2) The "listenAddr" attribute has been removed from the unions in
     virDomainGRaphicsDef for graphics types vnc, rdp, and spice.
     This attribute is now in the <listen> subelement (aka
     virDomainGraphicsListenDef)

  3) Helper functions were written to provide simple access
     (both Get and Set) to the listen elements and their attributes.

* src/libvirt_private.syms: export the listen helper functions

* src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c,
  src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c,
  src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c

  Modify all these files to use the listen helper functions rather
  than directly referencing the (now missing) listenAddr
  attribute. There can be multiple <listen> elements to a single
  <graphics>, but the drivers all currently only support one, so all
  replacements of direct access with a helper function indicate index
  "0".

* tests/* - only 3 of these are new files added explicitly to test the
  new <listen> element. All the others have been modified to reflect
  the fact that any legacy "listen" attributes passed in to the domain
  parse will be saved in a <listen> element (i.e. one of the
  virDomainGraphicsListenDefs), and during the domain format function,
  both the <listen> element as well as the legacy attributes will be
  output.
2011-07-28 13:46:39 -04:00