Commit Graph

481 Commits

Author SHA1 Message Date
Peter Krempa
f4f916a9e3 virsh: perf: Don't leak domain
After failing to parse the perf event list, the code would return
failure without freeing the previously acquired object. Rearrange the
code to avoid the problem.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329046
2016-04-21 09:57:02 +02:00
Nitesh Konkar
0ed35e0939 Return error when --start <number> in cpu-stats is invalid.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2016-04-15 15:20:11 +02:00
ShaoHe Feng
0d81f2318b virsh: add compression options for migration
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
2016-04-14 14:57:42 +02:00
Peter Krempa
5be120710e Add VIR_DOMAIN_EVENT_ID_DEVICE_REMOVAL_FAILED event
Since we didn't opt to use one single event for device lifecycle for a
VM we are missing one last event if the device removal failed. This
event will be emitted once we asked to eject the device but for some
reason it is not possible.
2016-04-13 13:26:29 +02:00
Nitesh Konkar
d9a0a885e2 Pass the correct cpu count when calling virDomainGetCPUStats.
When using the --start option, the show_count should not be set to
max_id as the --start <cpu> means we dont need those many initial cpu
stats. Hence, show_count should be adjusted accordingly.

https://bugzilla.redhat.com/show_bug.cgi?id=1249441

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2016-04-01 11:36:04 +02:00
Michal Privoznik
ed504ba392 virDomain{Get,Set}PerfEvents: support --config --live --current
Now that we have @flags we can support changing perf events just
in active or inactive configuration regardless of the other.
Previously, calling virDomainSetPerfEvents set events in both
active and inactive configuration at once. Even though we allow
users to set perf events that are to be enabled once domain is
started up. The virDomainGetPerfEvents API was flawed too. It
returned just runtime info.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-03-31 10:42:46 +02:00
Michal Privoznik
30cd5983b7 virsh: Make perf accept event list separated by commas
Everywhere else we use a comma separated list. There's no good
reason to make 'perf' command an exception. Currently, it accepts
string list separated by '|'.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-03-31 10:22:14 +02:00
Michal Privoznik
ee34745f6a virsh: Prefer VIRSH_COMMON_OPT_DOMAIN_FULL over full enumeration
We have a macro that does exactly what is done via full
enumeration.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-03-31 07:24:36 +02:00
Michal Privoznik
3b6c818532 virDomain{Get,Set}PerfEvents: Add @flags argument
I've noticed that these APIs are missing @flags argument. Even
though we don't have a use for them, it's our policy that every
new API must have @flags.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-03-31 07:24:36 +02:00
Peter Krempa
d40d18fb8f virsh: blockpull: Support --bytes and scaled integers
Use vshBlockJobOptionBandwidth to parse the bandwidth value which will
allow users to specify bandwidth in bytes or as a scaled integer.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1288000
2016-03-29 15:59:19 +02:00
Peter Krempa
453a6d8092 virsh: blockcopy: Support --bytes and scaled integers
Use vshBlockJobOptionBandwidth to parse the bandwidth value which will
allow users to specify bandwidth in bytes or as a scaled integer.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1288000
2016-03-29 15:58:41 +02:00
Peter Krempa
e557bd28a2 virsh: blockcommit: Support --bytes and scaled integers
Use vshBlockJobOptionBandwidth to parse the bandwidth value which will
allow users to specify bandwidth in bytes or as a scaled integer.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1288000
2016-03-29 15:55:28 +02:00
Peter Krempa
e54b5484c9 virsh: blockjob: Support --bytes and scaled integers as bandwidth
Use vshBlockJobOptionBandwidth to parse the bandwidth value which will
allow users to specify bandwidth in bytes or as a scaled integer.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1288000
2016-03-29 15:52:10 +02:00
Qiaowei Ren
608e9e8802 virsh: implement new command to support perf
This patch add new perf command to enable/disable perf event
for a guest domain.

Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-8-git-send-email-qiaowei.ren@intel.com
2016-03-29 13:13:05 +01:00
Cristian Klein
4cdc4a76d3 virsh: Add --postcopy-after-precopy option to migrate
Signed-off-by: Cristian Klein <cristiklein@gmail.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-03-21 15:15:46 +01:00
Jiri Denemark
257060349e virsh: Configurable migrate --timeout action
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-03-21 15:15:46 +01:00
Cristian Klein
179d97283f virsh: Add support for post-copy migration
Signed-off-by: Cristian Klein <cristiklein@gmail.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-03-21 15:15:46 +01:00
Jiri Denemark
5a9cbc6265 Add event and state details for post-copy
VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY and VIR_DOMAIN_PAUSED_POSTCOPY are
used on the source host once migration enters post-copy mode (which
means the domain gets paused on the source. After the destination host
takes over the execution of the domain, its virtual CPUs are resumed and
the domain enters VIR_DOMAIN_RUNNING_POSTCOPY state and
VIR_DOMAIN_EVENT_RESUMED_POSTCOPY event is emitted.

In case migration fails during post-copy mode and none of the hosts have
complete state of the domain, both domains will remain paused with
VIR_DOMAIN_PAUSED_POSTCOPY_FAILED reason and an upper layer may decide
what to do.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-03-21 15:15:46 +01:00
Nikolay Shirokovskiy
f486cb5ea0 migration: add target peer disks port
Some hypervisors (namely qemu) can have a separate connecton for
non-shared disks migration of active domains. Currently we have
no means to control the port of such a connection. At the same
time we have options to control port of memory migration traffic
(thru migration uri) as well as interfaces that target server
is bound to for incoming migration (thru VIR_MIGRATE_PARAM_LISTEN_ADDRESS).
Let's add the option for setting disks port too.

Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
2016-03-17 16:20:15 +01:00
Dmitry Andreev
8047d45704 Introduce new VIR_DOMAIN_EVENT_DEFINED_FROM_SNAPSHOT sub-event
VIR_DOMAIN_EVENT_DEFINED_FROM_SNAPSHOT event should be emitted
when domain configuration was changed on revert to snapshot.
2016-03-15 14:57:26 -04:00
Peter Krempa
e7e6980dd8 virsh: vcpupin: Ask for pinning info for all vCPUs
The API docs state that the API queries pinning info for all vCPUs and
thus we should allocate the bitmap even for the inactive ones.

The API will currently return bitmap only for the active vCPUs but that
will change in the future.
2016-03-09 10:09:16 +01:00
Jiri Denemark
f289300181 Introduce job completed event
The VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event will be triggered once a job
(such as migration) finishes and it will contain statistics for the job
as one would get by calling virDomainGetJobStats. Thanks to this event
it is now possible to get statistics of a completed migration of a
transient domain on the source host.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-03-08 16:26:00 +01:00
Nitesh Konkar
2652757070 virsh: reject migration with both --live and --offline
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2016-02-26 12:45:20 +01:00
Michal Privoznik
4a3ae388ba cmdSaveImageEdit: Prefer VSH_EXCLUSIVE_OPTIONS over by hand check
Since we have the macro there's no need for us to unwind it by
hand and check for mutually exclusive flags ourselves.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-02-22 16:56:07 +01:00
Peter Krempa
773f3bd3cc virsh: cpupin: Extract getter code into a separate function 2016-02-19 15:24:54 +01:00
Peter Krempa
a7bc9841a4 virsh: cmdVcpuPin: Simplify handling of API flags
Rather than setting flags to -1 if none were specified, move the logic
to use the old API to the place where we need to decide. It simplifies
the logic a bit.
2016-02-19 15:13:21 +01:00
Peter Krempa
3ad5186ed3 virsh: Remove <backingStore> when changing cdrom media source
Since the code is changing the source image path by modifying the
existing XML snippet the <backingStore> stays in place.

As <backingStore> is relevant to the <source> part of the image, the
update of that part makes the element invalid.

CD/floppy images usually don't have a backing chain and the element is
currently ignored though but it might start being used in the future so
let's start behaving correctly.

Drop the <backingStore> subtree once we want to update the XML.

Before this patch, you'd get:
$ virsh change-media --eject --print-xml 10 hdc
<disk type="file" device="cdrom">
      <driver name="qemu" type="qcow2"/>

      <backingStore type="file" index="1">
        <format type="qcow2"/>
        <source file="/var/lib/libvirt/images/vm.1436949097"/>
        <backingStore/>
      </backingStore>
      <target dev="hdc" bus="ide"/>
      ...
    </disk>

After:

 $ virsh change-media --eject --print-xml 10 hdc
<disk type="file" device="cdrom">
      <driver name="qemu" type="qcow2"/>

      <target dev="hdc" bus="ide"/>
      ...
    </disk>
2016-02-18 09:50:45 +01:00
Peter Krempa
27fa42b24c vsh: Replace vshPrint macro with function
The macro would eat the first parameter. In some cases the format string
for vshPrint was eaten. In other cases the calls referenced variables
which did not exist in the given context. Avoid errors by doing compile
time checking.
2016-02-15 13:31:12 +01:00
Michael Chapman
86c4df83b9 virsh: improve waiting for block job readiness
After a block job hits 100%, we only need to apply a timeout waiting for
a block job event if exactly one of the BLOCK_JOB or BLOCK_JOB_2
callbacks were able to be registered.

If neither callback could be registered, there's clearly no need for a
timeout.

If both callbacks were registered, then we're guaranteed to eventually
get one of the events. The path being used by virsh must be exactly the
source path or target device in the domain's disk definition, and these
are the respective strings sent back in these two events.

Signed-off-by: Michael Chapman <mike@very.puzzling.org>
2016-02-01 18:04:48 +01:00
Michael Chapman
8fa216bbb4 virsh: ensure SIGINT action is reset on all errors
If virTimeMillisNow() fails, the SIGINT action must be reset back to
its previous state.

Signed-off-by: Michael Chapman <mike@very.puzzling.org>
2016-02-01 18:04:48 +01:00
Michael Chapman
15dee2ef24 virsh: be consistent with style of loop exit
When waiting for a block job, the various statuses (COMPLETED, READY,
CANCELED, etc.) should all be treated consistently by having the loop be
exited with "break". Use "goto cleanup" for the error cases only, when
no block job status is available.

Signed-off-by: Michael Chapman <mike@very.puzzling.org>
2016-02-01 18:04:48 +01:00
Michael Chapman
704dfd6b0f virsh: avoid unnecessary progress updates
There is no need to call virshPrintJobProgress() unless the block job's
cur or end cursors have changed since the last iteration.

Signed-off-by: Michael Chapman <mike@very.puzzling.org>
2016-02-01 18:04:48 +01:00
Luyao Huang
985f01a65f virsh: fix cpu-stats command output format issue
After commit 57177f1, the cpu-stats command format change to:

CPU0:
    cpu_time         14401.507878990 seconds
    vcpu_time    14378732785511

vcpu_time is not user friendly. After this patch, it will
change back:
CPU0:
    cpu_time         14401.507878990 seconds
    vcpu_time        14378.732785511 seconds

https://bugzilla.redhat.com/show_bug.cgi?id=1301807

Signed-off-by: Luyao Huang <lhuang@redhat.com>
2016-01-26 09:23:49 +01:00
Peter Krempa
a2e80549a2 virsh: cpu-stats: Remove unneeded flags
virDomainGetCPUStats doesn't support flags so there's no need to carry
the 'flags' variable around. Additionally since the API is poorly
designed I doubt that it will be extended.
2016-01-25 17:45:09 +01:00
Peter Krempa
57177f1abd virsh: cpu-stats: Extract common printing code into a function
Simplify the code by extracting a common code path.
2016-01-25 17:45:09 +01:00
Michal Privoznik
9cbd1ecc3e virsh: Correctly detect inserted media in change-media command
https://bugzilla.redhat.com/show_bug.cgi?id=1250331

It all works like this. The change-media command dumps domain
XML, finds the corresponding cdrom device we want to change media
in and returns it in the xmlNodePtr form. This way we don't have
to bother with keeping all the subelements or attributes that we
don't care about in the XML that is fed back to libvirt for the
update API.

Now, the problem is we try to be clever here and detect if disk
already has a source (indicated by <source/> subelement).
However, bare fact that the element is there does not mean disk
has source. Make our clever check better.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-01-25 15:57:23 +01:00
Jiri Denemark
0b50f4a025 Introduce migration iteration event
The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-01-21 16:36:08 +01:00
Guido Günther
e8f771176e virsh: Update description of lxc-enter-namespace
Mention that we run a command in that namespace
2016-01-13 17:45:36 +01:00
John Ferlan
febf69b5e9 virsh: Create macro for common "file" option
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr for the less common help string for each
command option.  Note that only file options using "OT_DATA" and
"OFLAG_REQ" will be replace - others are left as is.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-01-11 18:14:00 -05:00
John Ferlan
5b42dbed98 virsh: Create macro for common "current" option
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect current domain". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-01-11 18:14:00 -05:00
John Ferlan
8e4108f039 virsh: Create macro for common "live" option
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect running domain". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-01-11 18:14:00 -05:00
John Ferlan
0dbac60b9e virsh: Create macro for common "config" option
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect next boot". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-01-11 18:14:00 -05:00
John Ferlan
c7ccd8b2e6 virsh: Create macro for common "persistent" option
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically.  Note that not all
'{.name = "persistent",' entries are replaced, just those that have the
common .help string of "make live change persistent".

Non replaced instances are unique to the command.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-01-11 18:14:00 -05:00
John Ferlan
b6fb1e245c virsh: Create macro for common "domain" option
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which will be used to pass the translatable
helpstr since not all domain options can take the same string.

The majority of the options take 'N_("domain name, id or uuid")', so
create a separate macro with a _FULL suffix while those that do not
take the same string will use the VIRSH_COMMON_OPT_DOMAIN macro.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-01-11 18:14:00 -05:00
Andrea Bolognani
75a96e0cc4 virsh: Add timestamps to QEMU monitor events
Implement a --timestamp option for 'virsh qemu-monitor-event', similar
to the one for 'virsh event'.

When the option is used, the human-readable timestamp will be printed
before the message, and the timing information provided by QEMU will
not be displayed.
2016-01-11 12:45:21 +01:00
Jiri Denemark
eb084a733b qemu: Report more migration statistics
memory_dirty_rate corresponds to dirty-pages-rate in QEMU and
memory_iteration is what QEMU reports in dirty-sync-count.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-01-08 18:18:58 +01:00
Jiri Denemark
aa7735e9d1 virsh: Add timestamps to events
A new --timestamp option for event virsh command can be used to print
timestamp of each event.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-01-08 10:39:20 +01:00
Jiri Denemark
7cbb7f059a virsh: Refactor event printing
To reduce code duplication.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-01-08 10:39:20 +01:00
John Ferlan
2eba5c5635 virsh: Add --delete-snapshots flag for undefine and vol-delete
https://bugzilla.redhat.com/show_bug.cgi?id=1281710

Commit id '3c7590e0a' added the flag to the rbd backend, but provided
no means via virsh to use the flag.  This patch adds a '--delete-snapshots'
option to both the "undefine" and "vol-delete" commands.

For "undefine", the flag is combined with the "--remove-all-storage" flag
in order to add the appropriate flag for the virStorageVolDelete call;
whereas, for the "vol-delete" command, just the flag is sufficient since
it's only operating on one volume.

Currently only supported for rbd backends.
2015-12-18 10:51:08 -05:00
Ján Tomko
ea723c4826 virsh: rename vshCommandOptString to vshCommandOptStringQuiet
This function does not set an error. Make it obvious in its name
to discourage its usage without reporting an error in the caller.
2015-12-09 10:44:26 +01:00
Ján Tomko
b15e26f939 virsh: remove custom error for cpulist from cmdIOThreadPin
Instead of the custom error:
error: iothreadpin: invalid cpulist.

use vshCommandOptStringReq and let it report a more specific error:
error: Failed to get option 'cpulist': Option argument is empty
2015-12-03 13:58:52 +01:00
Ján Tomko
45138725cf virsh: report errors for empty strings
Several callers were using vshCommandOptString without setting an error.
Use vshCommandOptStringReq which sets the error.

https://bugzilla.redhat.com/show_bug.cgi?id=1281707
2015-12-03 13:58:52 +01:00
Martin Kletzander
adac38dbbd virsh: Try to keep printed XML pretty with change-media
When adding a new media with change-media and --print-xml, let's try
making it more readable and nice.

Before:
<disk type="file" device="cdrom">
...
      <target dev="hdb" bus="ide"/>
      <address type="drive" controller="0" bus="0" target="0" unit="1"/>
    <source file="/tmp/a.iso"/></disk>

After:
<disk type="file" device="cdrom">
...
      <source file="/tmp/a.iso"/>
      <target dev="hdb" bus="ide"/>
      <address type="drive" controller="0" bus="0" target="0" unit="1"/>
    </disk>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1219719

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-11-26 15:10:55 +01:00
Pavel Hrdina
a9a583d6df virsh-domain: update attach-interface to support type=hostdev
Adding this feature will allow users to easily attach a hostdev network
interface using PCI passthrough.

The interface can be attached using --type=hostdev and PCI address or
as --source.  This command also allows you to tell, whether the interface
should be managed.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=997561

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-11-11 15:03:42 +01:00
Pavel Hrdina
8eddc307e9 virsh-domain: use correct base for virStrToLong_ui
While parsing device addresses we should use correct base and don't
count on auto-detect.  For example, PCI address uses hex numbers, but
each number starting with 0 will be auto-detected as octal number and
that's wrong.  Another wrong use-case is for PCI address if for example
bus is 10, than it's incorrectly parsed as decimal number.

PCI and CCW addresses have all values as hex numbers, IDE and SCSI
addresses are in decimal numbers.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-10-27 15:26:44 +01:00
Luyao Huang
c62c59a984 virsh: Display an error when passing count <= 0 to setvcpus
The number of vCPUs for a guest must be between 1 and the
maximum value configured in the domain XML. This commit
introduces checks to make sure that passing count <= 0
results in an error.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1248277

Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-10-22 09:22:44 +02:00
Peter Krempa
4ceaa7491e virsh: Use 'format' argument only when specified
The condition checking whether --format was specified was incorrect.
virsh crashed if the following format was used:

 virsh dump VM dump --format '' --memory-only

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1272301
2015-10-16 09:01:17 +02:00
Michal Privoznik
d72a8f7465 virsh: Preserve startupPolicy in change-media command
https://bugzilla.redhat.com/show_bug.cgi?id=1250331

Even after my rework of startupPolicy handling, one command
slipped my attention. The change-media command has a very unique
approach to constructing disk XML. However, it will not preserve
startupPolicy attribute.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-09-29 13:29:29 +02:00
Peter Krempa
7acfb940f7 virsh: Fix job status indicator for 0 length block jobs
Although 0 length block jobs aren't entirely useful, the output of virsh
blockjob is empty due to the condition that suppresses the output for
migration jobs that did not start. Since the only place that actually
uses the condition that suppresses the output is in migration, let's
move the check there and thus add support for 0 of 0 equaling to 100%.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1196711
2015-09-23 15:06:56 +02:00
Michal Privoznik
41d4104d3e virsh: Teach attach-interface to --print-xml
We have the same argument to many other commands that produce an
XML based on what user typed. But unfortunately attach-interface
was missing it. Maybe nobody had needed it yet. Well, I did
just now.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-09-16 16:10:48 +02:00
Jonathan Toppins
5c668a78d8 qemu: add udp interface support
Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.

The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.

<interface type='udp'>
  <mac address='52:54:00:5c:67:56'/>
  <source address='127.0.0.1' port='11112'>
    <local address='127.0.0.1' port='22222'/>
  </source>
  <model type='virtio'/>
  <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>

QEMU call:
	-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222

Notice the xml "local" entry becomes the "localaddr" for the qemu call.

reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.html

Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2015-09-02 10:17:50 +02:00
Luyao Huang
70f56dd72c virsh: Reset global error after successfull domain lookup
When looking up a domain, we try to look up by ID, UUID and NAME
consequently while not really caring which of those lookups succeeds.
The problem is that if any of them fails, we dispatch the error from the
driver and that means setting both threadlocal and global error. Let's
say the last lookup (by NAME) succeeds and resets the threadlocal error as any
other API does, however leaving the global error unchanged. If the underlying
virsh command does not succeed afterwards, our cleanup routine in
vshCommandRun ensures that no libvirt error will be forgotten and that's
exactly where this global error comes in incorrectly.

 # virsh domif-setlink 123 vnet1 up
 error: interface (target: vnet1) not found
 error: Domain not found: no domain with matching id 123

This patch also resets the global error which would otherwise cause some
minor confusion in reported error messages.

https://bugzilla.redhat.com/show_bug.cgi?id=1254152

Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
2015-08-18 14:54:45 +02:00
Luyao Huang
b2da1d453f virsh: fix always return false in domrename
Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-08-17 12:43:17 -04:00
Erik Skultety
834c5720e4 tools: Introduce new client generic module vsh
In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.

Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.

Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.
2015-08-14 15:45:44 +02:00
Tomas Meszaros
9877d8406c Introduce new VIR_DOMAIN_EVENT_DEFINED_RENAMED event
This should be emitted whenever a domain is renamed.

Signed-off-by: Tomas Meszaros <exo@tty.sk>
2015-08-14 10:50:20 +02:00
Tomas Meszaros
ff486e0d29 virsh: Implement "domrename" command
This patch implements new virsh command, domrename.

Using domrename, it will be possible to rename domain from the virsh shell by
calling virRenameDomain API.

It takes two arguments, current domain name and new domain name.

Example:

virsh # list --all
 Id    Name                           State
 ----------------------------------------------------
  -     bar                            shut off

virsh # domrename bar foo
Domain successfully renamed

virsh # list --all
 Id    Name                           State
 ----------------------------------------------------
  -     foo                            shut off

virsh #

Signed-off-by: Tomas Meszaros <exo@tty.sk>
2015-08-14 10:50:20 +02:00
Michal Privoznik
68b2405c67 cmdAttachInterface: Fully implement @floor support
In my previous commit d7f5c88961 I tried to introduce support
for inbound.floor. But the code change was incomplete. This is
the change needed to fully enable the feature.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-08-12 10:57:36 +02:00
Peter Krempa
73ca6f98a3 virsh: Refactor parseRateStr to avoid false-positive uninitialized variable
Commit 6983d6d2 tried to improve parseRateStr but broke the build
instead for compilers that were not able to properly introspect the for
loop indexed by the enum resulting into the following error:

virsh-domain.c: In function 'parseRateStr':
virsh-domain.c:916:13: error: 'field_name' may be used uninitialized in this function [-Werror=maybe-uninitialized]
             vshError(ctl, _("malformed %s field"), field_name);
             ^
virsh-domain.c:915:13: error: 'tmp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
         if (virStrToLong_ullp(token, NULL, 10, tmp) < 0) {
             ^
Rather than trying to fix the code, refactor the function again by
reusing virStringSplit.
2015-08-12 07:33:06 +02:00
Michal Privoznik
d7f5c88961 virsh: Implement VIR_DOMAIN_BANDWIDTH_IN_FLOOR
We have a function parseRateStr() that parses --inbound and
--outbound arguments to both attach-interface and domiftune.
Now that we have all virTypedParams macros needed for QoS,
lets parse even floor attribute. The extended format for the
arguments looks like this then:

  --inbound average[,peak[,burst[,floor]]]

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-08-11 16:10:32 +02:00
Michal Privoznik
6983d6d2c3 virsh: Rework parseRateStr
The function is used to parse a tuple delimited by commas into
virNetDevBandwidth structure. So far only three out of fore
fields are supported: average, peak and burst. The single missing
field is floor. Well, the parsing works, but I think we can do
better. Especially when we will need to parse floor too in very
close future.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-08-11 16:10:32 +02:00
Luyao Huang
ee6160b549 virsh: fix domfsinfo output in quiet mode
https://bugzilla.redhat.com/show_bug.cgi?id=1250287

When run domfsinfo in quiet mode, we cannot get any
useful information (just get \n), this is because
we didn't use vshPrint to print useful information.

Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-08-05 09:58:32 +02:00
Peter Krempa
faa1439123 virsh: Refactor block job waiting in cmdBlockCopy
Similarly to the refactor of cmdBlockCommit in a previous commit this
does the same change for cmdBlockCopy.
2015-07-21 15:32:59 +02:00
Peter Krempa
7408403560 virsh: Refactor block job waiting in cmdBlockCommit
Reuse the vshBlockJobWait infrastructure to refactor cmdBlockCommit to
use the common code. This additionally fixes a bug when working with
new qemus, where when doing an active commit with --pivot the pivoting
would fail, since qemu reaches 100% completion but the job doesn't
switch to synchronized phase right away.
2015-07-21 15:32:59 +02:00
Peter Krempa
2e78276364 virsh: Refactor block job waiting in cmdBlockPull
Introduce helper function that will provide logic for waiting for block
job completion so the 3 open coded places can be unified and improved.

This patch introduces the whole logic and uses it to fix
cmdBlockJobPull. The vshBlockJobWait function provides common logic for
block job waiting that should be robust enough to work across all
previous versions of libvirt. Since virsh allows passing user-provided
strings as paths of block devices we can't reliably use block job events
for detection of block job states so the function contains a great deal
of fallback logic.
2015-07-21 15:32:59 +02:00
Peter Krempa
44b18323e5 virsh: Refactor argument handling in cmdBlockPull
Put all argument parsing together and refactor the argument checking
code.
2015-07-21 15:32:59 +02:00
Peter Krempa
8e85f62826 virsh: Refactor argument handling in cmdBlockCopy
Put all argument parsing together and refactor the argument checking
code.
2015-07-21 15:32:59 +02:00
Peter Krempa
bd687cf9b9 virsh: Refactor argument checking in cmdBlockCommit
Use the VSH_EXCLUSIVE_OPTIONS to exclude combinations of --pivot and
--keep-overlay and refactor the enforcing of the --wait option and other
flags that imply --wait.
2015-07-21 15:32:59 +02:00
Peter Krempa
5dceea2c95 virsh: Kill blockJobImpl by moving the final impl into cmdBlockCommit
Final cleanup to get rid of the hub function.
2015-07-21 15:32:59 +02:00
Peter Krempa
bb5a145d2d virsh: Split out block pull implementation from blockJobImpl 2015-07-21 15:32:59 +02:00
Peter Krempa
a538ff8d9c virsh: block job: separate abort from blockJobImpl 2015-07-21 15:32:59 +02:00
Peter Krempa
42c9c6fcfc virsh: blockjob: Split out vshBlockJobSetSpeed from blockJobImpl 2015-07-21 15:32:58 +02:00
Peter Krempa
2f12cb9355 virsh: cmdBlockJob: Switch to declarative flag interlocking
Use the VSH_EXCLUSIVE_OPTIONS_VAR to interlock incompatible options.
Since a variable named 'abort' would conflict with older compilers use
VSH_EXCLUSIVE_OPTIONS for the --abort option.
2015-07-21 15:32:58 +02:00
Peter Krempa
dda95b531f virsh: blockjob: Extract block job info code into a separate function
cmdBlockJob will be converted to a hub that will call into the
individual executor functions.
2015-07-21 15:32:58 +02:00
Michal Privoznik
416d0e9418 cmdVcpuPin: Remove dead code
There's this condition:

flags & VIR_DOMAIN_AFFECT_CURRENT && virDomainIsActive(dom)

which can never be true since VIR_DOMAIN_AFFECT_CURRENT has hardcoded
value of zero. Therefore virDomainIsActive() is a dead code. However,
the condition could make sense if it is rewritten as the following:

!(flags & VIR_DOMAIN_AFFECT_CONFIG) && virDomainIsActive(dom)

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-07-15 11:40:41 +02:00
Luyao Huang
848ab685f7 virsh: report error if vcpu number exceed the guest maxvcpu number
Commit id '81dd81e' caused a regression when attempting to print a
specific vcpuid that is out of the range of the maximum vcpus for
the guest, such as:

 $ virsh vcpupin $dom 1000
 VCPU: CPU Affinity
 ----------------------------------

 $

Rather than just recover the old message, let's adjust the message based
on what would be displayed for a similar failure in the set path, such as:

 $ virsh vcpupin $dom 1000
 error: vcpu 1000 is out of range of persistent cpu count 2

 $ virsh vcpupin $dom 1000 --live
 error: vcpu 1000 is out of range of live cpu count 2

 $

Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-07-02 06:26:37 -04:00
Boris Fiuczynski
1238dc29af Support for a new watchdog action inject-nmi
This patch provides support for a new watchdog action "inject-nmi" which
allows to define an inject of a non-maskable interrupt into a guest.

Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
2015-06-24 15:26:31 +02:00
Eric Farman
22b8a61756 Convert SCSI logical unit from unsigned int to unsigned long long
The SCSI Architecture Model defines a logical unit address
as 64-bits in length, so change the field accordingly so
that the entire value could be stored.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
2015-06-22 16:03:33 -04:00
Eric Farman
3b7983ad6d Print SCSI address attributes bus, target, unit as unsigned integer
The address elements are all unsigned integers, so we should
use the appropriate print directive when printing it.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
2015-06-22 16:03:33 -04:00
Eric Farman
f714f52882 Read SCSI address attributes bus, target, unit as positive integer
The SCSI address element attributes bus, target, and unit are expected
to be positive values, so make sure no one provides a negative value since
the value is stored as an unsigned.

Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
2015-06-22 16:03:33 -04:00
Peter Krempa
e7d3ff8464 virsh: blockcopy: Report error if the copy job fails
When the block job would fail while watching it using the "--wait"
option for blockcopy, virsh would rather unhelpfully report:

$ virsh blockcopy vm hdc /tmp/raw.img --granularity 4096 --verbose --wait

Now in mirroring phase

Add a special case when the block job vanishes while waiting for it to
finish to improve the message:

$ virsh blockcopy vm hdc /tmp/raw.img --granularity 8192 --verbose --wait
error: Block Copy unexpectedly failed
2015-06-22 11:09:54 +02:00
Pavel Boldin
a4e92f9e14 virsh: selective block device migration
Add `virsh migrate' option `--migrate-disks' that allows CLI user to
explicitly specify block devices to migrate.

Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-06-18 16:46:09 +02:00
Peter Krempa
23e913671d virsh: change-media: Fix behavior with --update without a source
Docs state that it should behave like eject. Currently the code does not
do that. This is a regression since f4b5f53027.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1229592
2015-06-09 14:06:08 +02:00
Jiri Denemark
e9507fd41c virsh: Fix Ctrl-C behavior when watching a job
When watching a job (save, managedsave, dump, migrate) virsh spawns a
thread to call the appropriate API and waits for the result while
watching for interruption signals (SIGINT, Ctrl-C on the terminal).
Whenever such signal is caught, virsh calls virDomainAbortJob, stops
waiting for the job, and returns the result of virDomainAbortJob.

This is wrong because the job might have finished in the meantime or it
might have been cancelled by someone else and virsh would just report
the failure to abort the job. However, we are not interested in the
virDomainAbortJob's result at all, we need to keep waiting for the main
job to finish and report its result instead.

https://bugzilla.redhat.com/show_bug.cgi?id=1131755

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-06-03 09:53:02 +02:00
Andrea Bolognani
815dc963ee virsh: Move error messages inside vshCommandOpt*() functions 2015-06-02 09:20:31 -04:00
Andrea Bolognani
be6ff4da95 virsh: Pass vshControl to all vshCommandOpt*() calls
This will allow us to use vshError() to report errors from inside
vshCommandOpt*(), instead of replicating the same logic and error
messages all over the place.

We also have more context inside the vshCommandOpt*() functions,
for example the actual value used on the command line, which means
we can produce more detailed error messages.

vshCommandOptBool() is the exception here, because it's explicitly
designed not to report any error.
2015-06-02 09:20:31 -04:00
Ján Tomko
61139c4438 Fix the event name in vshEventTrayChangePrint
https://bugzilla.redhat.com/show_bug.cgi?id=1206114#c5

Reported by: zhenfeng wang <zhwang@redhat.com>
2015-05-28 14:14:47 +02:00
Ján Tomko
9bcadfabaa virsh: add set-user-password command
Expose the virDomainSetUserPassword API in virsh:
virsh set-user-password dom user 123456
2015-05-21 16:21:55 +02:00
Andrea Bolognani
8e2c5940cd virsh: Improve handling of send-process-signal --pid.
Use vshCommandOptLongLong() instead of retrieving the value as a
string and converting it to a number manually.
2015-05-18 10:50:06 +02:00
Andrea Bolognani
449316701b virsh: Improve error message on integer value parsing failure.
Replace more than 30 ad-hoc error messages with a single, generic one
that contains the name of the option being processed and some hints
to help the user understand what could have gone wrong.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207043
2015-05-18 10:50:06 +02:00
Luyao Huang
60107346a4 virsh: Report an error when cpulist parsing fails
When parsing a cpulist, the virBitmapParse is used. On an invalid
bitmap an error is reported, but the error gets cleared
immediately by subsequent public APIs call, e.g. virDomainFree().
Moreover, we don't check whether bitmap fits into maximal CPU ID
on the host. Therefore the following examples failed without any
error:

 # virsh vcpupin test3 1 aaa

 # virsh vcpupin test3 1 1000

Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-05-14 14:16:07 +02:00
Jiri Denemark
05cda3d3a4 virsh: Don't check migrate parameters
Just pass anything a user specified to the appropriate API. It's the API
or libvirtd that should be responsible for checking its parameters.

https://bugzilla.redhat.com/show_bug.cgi?id=1066375
https://bugzilla.redhat.com/show_bug.cgi?id=1073233

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-05-04 15:06:33 +02:00
Luyao Huang
3dae162db7 tools: fix the wrong check when use virsh setvcpus --maximum
The --maximum option wasn't properly parsed and the equivalent flag
wasn't set.  Fix this bug and also rewrite the way we check this option
by using new macro.  The new approach is that --maximum requires
--config, no other combination is allowed, because they don't make sense.

The new error will be:

 # virsh setvcpus test --maximum 10
 error: Option --config is required by option --maximum

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1204033

Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-05-04 10:26:57 +02:00
John Ferlan
1f7e811249 virsh: Add iothreadadd and iothreaddel commands
https://bugzilla.redhat.com/show_bug.cgi?id=1161617

Add command to allow adding and removing IOThreads from the domain including
the configuration and live domain.

$ virsh iothreadadd --help
  NAME
    iothreadadd - add an IOThread to the guest domain

  SYNOPSIS
    iothreadadd <domain> <id> [--config] [--live] [--current]

  DESCRIPTION
    Add an IOThread to the guest domain.

  OPTIONS
    [--domain] <string>  domain name, id or uuid
    [--id] <number>  iothread for the new IOThread
    --config         affect next boot
    --live           affect running domain
    --current        affect current domain

$ virsh iothreaddel --help
  NAME
    iothreaddel - delete an IOThread from the guest domain

  SYNOPSIS
    iothreaddel <domain> <id> [--config] [--live] [--current]

  DESCRIPTION
    Delete an IOThread from the guest domain.

  OPTIONS
    [--domain] <string>  domain name, id or uuid
    [--id] <number>  iothread_id for the IOThread to delete
    --config         affect next boot
    --live           affect running domain
    --current        affect current domain

Assuming a running $dom with multiple IOThreads assigned and that
that the $dom has disks assigned to IOThread 1 and IOThread 2:

$ virsh iothreadinfo $dom
 IOThread ID     CPU Affinity
 ---------------------------------------------------
  1               2
  2               3
  3               0-1

$ virsh iothreadadd $dom 1
error: invalid argument: an IOThread is already using iothread_id '1' in iothreadpids

$ virsh iothreadadd $dom 1 --config
error: invalid argument: an IOThread is already using iothread_id '1' in persistent iothreadids

$ virsh iothreadadd $dom 4
$ virsh iothreadinfo $dom
 IOThread ID     CPU Affinity
 ---------------------------------------------------
  1               2
  2               3
  3               0-1
  4               0-3

$ virsh iothreadinfo $dom --config
 IOThread ID     CPU Affinity
 ---------------------------------------------------
  1               2
  2               3
  3               0-1

$ virsh iothreadadd $dom 4 --config
$ virsh iothreadinfo $dom --config
 IOThread ID     CPU Affinity
  ---------------------------------------------------
    1               2
    2               3
    3               0-1
    4               0-3

Assuming the same original configuration

$ virsh iothreaddel $dom 1
error: invalid argument: cannot remove IOThread 1 since it is being used by disk 'vde'

$ virsh iothreaddel $dom 3

$ virsh iothreadinfo $dom
 IOThread ID     CPU Affinity
 ---------------------------------------------------
  1               2
  2               3

$ virsh iothreadinfo $dom --config
 IOThread ID     CPU Affinity
 ---------------------------------------------------
  1               2
  2               3
  3               0-1
2015-04-27 12:36:36 -04:00
Jiri Denemark
aa9f139599 migration: Usable time statistics without requiring NTP
virDomainGetJobStats is able to report statistics of a completed
migration, however to get usable downtime and total time statistics both
hosts have to keep synchronized time. To provide at least some
estimation of the times even when NTP daemons are not running on both
hosts we can just ignore the time needed to transfer a migration cookie
to the destination host. The result will be also inaccurate but a bit
more predictable. The total/down time will just be at least what we
report.

https://bugzilla.redhat.com/show_bug.cgi?id=1213434
2015-04-24 15:02:00 +02:00
Ján Tomko
1882c0bd8d Add VIR_DOMAIN_EVENT_ID_DEVICE_ADDED event
The counterpart to VIR_DOMAIN_EVENT_ID_DEVICE_REMOVED.

https://bugzilla.redhat.com/show_bug.cgi?id=1206114
2015-04-15 17:06:01 +02:00
Eric Blake
31ef0836a7 virsh: fix regression in 'virsh event' by domain
Commit a0670ae caused a regression in 'virsh event' and
'virsh qemu-monitor-event' - if a user tries to filter the
command to a specific domain, an error message is printed:

$ virsh event dom --loop
error: internal error: virsh qemu-monitor-event: no domain VSH_OT_DATA option

and then the command continues as though no domain had been
supplied (giving events for ALL domains, instead of the
requested one).  This is because the code was incorrectly
assuming that all "domain" options would be supplied via a
mandatory VSH_OT_DATA, even though "domain" is optional for
these two commands, so we had changed them to VSH_OT_STRING
to quit failing for other reasons (ever since it was decided
that VSH_OT_DATA and VSH_OT_STRING should no longer be
synonyms).

In looking at the situation, though, the code for looking up
a domain was making a pointless check for whether the option
exists prior to finding the option's string value, as
vshCommandOptStringReq does just fine at reporting any errors
when looking up a string whether or not the option was present.

So this is a case of regression fixing by pure code deletion :)

* tools/virsh-domain.c (vshCommandOptDomainBy): Drop useless filter.
* tools/virsh-interface.c (vshCommandOptInterfaceBy): Likewise.
* tools/virsh-network.c (vshCommandOptNetworkBy): Likewise.
* tools/virsh-nwfilter.c (vshCommandOptNWFilterBy): Likewise.
* tools/virsh-secret.c (vshCommandOptSecret): Likewise.
* tools/virsh.h (vshCmdHasOption): Drop unused function.
* tools/virsh.c (vshCmdHasOption): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2015-04-15 08:13:53 -06:00
Shanzhi Yu
8ff9f2457d virsh: improve the error for wrong memtune parameters
When set guest memory with a invalid parameter of --soft-limit,
it posts weird error:

$ virsh memtune r7 --hard-limit 20417224 --soft-limit 9007199254740992 \
  --swap-hard-limit 35417224
error: Unable to parse integer parameter 'NAME

Change it to

error: Unable to parse integer parameter soft-limit

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1211550
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2015-04-14 13:48:29 +02:00
Ján Tomko
ff6d2314d8 Rewrite vshParseCPUList
Use virBitmap helpers that were added after this function.

Change cpumaplen to int and fill it out by this function.
2015-04-13 17:20:59 +02:00
Ján Tomko
4c4b821ec3 Rewrite vshPrintPinInfo
Use virBitmapDataToString instead of constructing the ranges bit
by bit, remove the checking of parameters (that is already done
by the callers).

Let the callers choose the right bitmap, since there's only
one that uses this helper on a matrix-in-an-array.
2015-04-13 17:20:59 +02:00
Cole Robinson
e3aa4c91c8 virsh: Improve change-media success message
$ sudo virsh change-media f19 hdc /mnt/data/devel/media/Fedora-16-x86_64-Live-KDE.iso
succeeded to complete action update on media

Change the message to:

  Successfully {inserted,ejected,changed} media.

https://bugzilla.redhat.com/show_bug.cgi?id=967946
2015-04-06 16:32:31 -04:00
Ján Tomko
d64cd4a4c6 Fix indentation in cmdVcpuPin 2015-04-02 10:57:01 +02:00
Ján Tomko
d647ed858e virsh: remove stale comment
Copied from the vcpupin command, which has two modes of operation.
2015-04-02 10:46:30 +02:00
Ján Tomko
15e61034a5 Remove unnecessary includes from virsh.h
Include them in the files that need them instead.
2015-04-02 10:27:56 +02:00
Luyao Huang
390f218b83 virsh: blockCopy: Add missing jump on error path
The overflow check for the bandwidth parameter did not jump to the
cleanup label.

Additionally virsh should use vshError instead of virReportError.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1206987

Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-03-30 16:42:22 +02:00
Ján Tomko
a96b68e7a4 Rename DomainGetIOThreadsInfo to DomainGetIOThreadInfo
While it returns info about multiple threads, the version
without the plural is easier to read.
2015-03-26 16:11:10 +01:00
Ján Tomko
cf8b828a72 Rename virDomainIOThreadsInfoFree to virDomainIOThreadInfoFree
This function only frees the info for one thread.
2015-03-26 16:11:10 +01:00
Ján Tomko
fa67489d76 virsh: rename iothreadsinfo to iothreadinfo
The plural seems unnecessary.
2015-03-26 13:49:49 +01:00
Peter Krempa
f4b5f53027 virsh: domain: Fix the change-media command
The command did not modify the disk type and thus didn't allow to change
media from a file image to a block backed image or vice versa. In
addition when operating on a network backed removable devices the
command would replace the while <source> subelement with an invalid one.

This patch adds the --block option that allows to specify that the new
image is block backed and assumes that without that option all images
are file backed. Since network backends were always mangled it should
not cause problems.
2015-03-17 17:11:37 +01:00
Peter Krempa
4cbcaffb74 virsh: domain: Add --print-xml flag for command change-media
Allow printing the XML that would be used mostly for debugging purposes.
2015-03-17 17:11:37 +01:00
Peter Krempa
1cc820937a virsh: domain: Don't use vshPrepareDiskXML for creating XML to detach disk
Since cmdDetachDisk() calls into vshPrepareDiskXML() with
type == VSH_PREPARE_DISK_XML_NONE && source == NULL this would result
into skipping all the checks and effectively turn the function into a
XML formatter.

This patch changes the code to use the formatter directly so that the
function can be refactored in a easier way.
2015-03-17 17:11:37 +01:00
Eric Blake
ceec58ac9e virsh: fix report of non-active commit completion
Commit f182da20 (v1.2.6) caused a slight regression in virsh
reporting of a non-active block job; where it used to state
"Commit complete", it now states "Now in synchronized phase".
But the synchronized phase is only possible for an active commit.

For a reproducer, I created a chain 'a <- b <- c <- d <- e' and
ran virsh blockcommit $dom vda --top c --base a --verbose --wait

* tools/virsh-domain.c (cmdBlockCommit): Synchronized phase is
only possible on active commits.

Signed-off-by: Eric Blake <eblake@redhat.com>
2015-03-14 20:53:33 -06:00
John Ferlan
1cfc0a9990 virsh: Add iothreadpin command
https://bugzilla.redhat.com/show_bug.cgi?id=1135491

$ virsh iothread --help

  NAME
    iothreadpin - control domain IOThread affinity

  SYNOPSIS
    iothreadpin <domain> <iothread> <cpulist> [--config] [--live] [--current]

  DESCRIPTION
    Pin domain IOThreads to host physical CPUs.

  OPTIONS
    [--domain] <string>  domain name, id or uuid
    [--iothread] <number>  IOThread ID number
    [--cpulist] <string>  host cpu number(s) to set
    --config         affect next boot
    --live           affect running domain
    --current        affect current domain

Using the output from iothreadsinfo, allow changing the pinned CPUs for
a single IOThread.

$ virsh iothreadsinfo $dom
 IOThread ID    CPU Affinity
---------------------------------------------------
 1               2
 2               3
 3               0-1

$ virsh iothreadpin $dom 3 0-2

Then view the change

$ virsh iothreadsinfo $dom
 IOThread ID    CPU Affinity
---------------------------------------------------
 1               2
 2               3
 3               0-2

If an invalid value is supplied or require option missing,
then an error will be displayed:

$ virsh iothreadpin $dom 4 3
error: invalid argument: iothread value out of range 4 > 3

$ virsh iothreadpin $dom 3
error: command 'iothreadpin' requires <cpulist> option
2015-03-11 12:24:00 -04:00
John Ferlan
f41a5b844f virsh: Add 'iothreadsinfo' command
Add the 'iothreadsinfo' command to display IOThread Info data. Allow for
[--live] or [--config] options in order to display live or config data
for an active domain.

$ virsh iothreadsinfo --help
  NAME
    iothreadsinfo - view domain IOThreads

  SYNOPSIS
    iothreadsinfo <domain> [--config] [--live] [--current]

  DESCRIPTION
    Returns basic information about the domain IOThreads.

  OPTIONS
    [--domain] <string>  domain name, id or uuid
    --config         affect next boot
    --live           affect running domain
    --current        affect current domain

An active domain may return:

$ virsh iothreads $dom
 IOThread ID     CPU Affinity
---------------------------------------------------
  1               2
  2               3
  3               0

$ echo $?
0

For domains which don't have IOThreads the following is returned:

$ virsh iothreads $dom
No IOThreads found for the domain

$ echo $?
0

For domains which are not running the following is returned:

$ virsh iothreads $dom --live
error: Unable to get domain IOThreads information
error: Requested operation is not valid: domain is not running

$ echo $?
1

Editing a domains configuration and modifying the iothreadpin data for
thread 3 from nothing provided to setting a cpuset of '0-1' and then
displaying using --config would display:

$ virsh iothreads f18iothr --config
 IOThread ID     CPU Affinity
 ----------------------------
  1               2
  2               3
  3               0-1

$

Signed-off-by: John Ferlan <jferlan@redhat.com>
2015-03-06 06:49:32 -05:00
Pavel Hrdina
c2020b08ce virsh: fix memtune to also accept 0 as valid value
Fix vshMemtuneGetSize to return correct value.  We can then decide
according that return code whether a parameter is present and valid or
not.  This will allow as to accept 0 as a valid value.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-03-06 11:52:15 +01:00
Ján Tomko
c7b9f20666 Add --migratable support to virsh cpu-baseline
Wire up VIR_CONNECT_BASELINE_CPU_MIGRATABLE to this
command line option.
2015-03-02 07:59:12 +01:00
Pavel Hrdina
81dd81e475 virsh: fix vcpupin info
The "virDomainGetInfo" will get for running domain only live info and for
offline domain only config info. There was no way how to get config info
for running domain. We will use "vshCPUCountCollect" instead to get the
correct cpu count that we need to pass to "virDomainGetVcpuPinInfo".

Also cleanup some unnecessary variables and checks that are done by
drivers.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1160559

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-02-20 16:17:19 +01:00
Martin Kletzander
1bb1de83b2 virsh-edit: Make force editing usable
When editing a domain with 'virsh edit' and failing validation, the
usual message pops up:

  Failed. Try again? [y,n,f,?]:

Turning off validation can be useful, mainly for testing (but other
purposes too), so this patch adds support for relaxing definition in
virsh-edit and makes 'virsh edit <domain>' more usable.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-02-20 07:46:54 +01:00
Luyao Huang
073bef6412 virsh: fix IP address in vncdisplay for listen type='network'
Just like the fix for domdisplay in commit 1ba815.
2015-02-16 11:20:43 +01:00
Michal Privoznik
e008a03324 virsh attach-interface: Allow macvtap hotplug
Our hotplug code supports macvtap insertion to guests. However, we
somehow forgot about 'attach-interface' (which tries to build XML from
passed arguments and use virDomainAttachDeviceFlags()).
New type is accessible under 'direct' type, to keep the same type as
used in domain XML.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-02-13 09:33:12 +01:00
Michal Privoznik
dd6668f174 virsh attach-interface: Use virDomainNetType{From,To}String()
Instead of verbose string to enum conversion (if STREQ() else if
STREQ() else if STREQ() ...) lets use virDomainNetType{From,To}String.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-02-13 09:33:12 +01:00
Michal Privoznik
18bcba55cd virsh attach-interface: Use enum instead of arbitrary integers
The type of interface to attach is held in the variable 'typ'.
Depending on interface type selected by user, the variable is set
either to 1 (network), or 2 (bridge). Lets use already existing
enum from domain_conf.h instead: virDomainNetType.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-02-13 09:33:12 +01:00
Luyao Huang
1ba8156cc9 virsh: fix IP address in domdisplay for listen type='network'
https://bugzilla.redhat.com/show_bug.cgi?id=1191016

virsh's domdisplay command looks in /domain/devices/graphics/@listen
of the domain's XML for the listen address, however for listen
type='network' (added in libvirt 0.9.4), the <graphics> element
doesn't have a listen attribute, but has a <listen> subelement,
*still* with no address (this is the inactive XML):

 <graphics type='spice' autoport='yes' keymap='en-us'>
  <listen type='network' network='default'/>
 </graphics>

However, at domain start time the <listen> subelement gets its address
attribute filled in once libvirt figures out the IP address associated
with the named network (this is the status XML):

 <graphics type='spice' port='5901' autoport='yes' keymap='en-us'>
  <listen type='network' address='192.168.122.1' network='default'/>
 </graphics>

So in these cases, we need to look at
/domain/devices/graphics/listen/@address instead.

Even though another patch is being pushed that will backfill
listen/@address into @listen, this patch is still useful, as it fixes
domdisplay for cases of a new virsh (with this patch) connecting to a
libvirtd that is newer than 0.9.4 but doesn't have the followup patch.

Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Laine Stump <laine@laine.org>
2015-02-11 10:52:22 -05:00
Stefan Zimmermann
4b4c7208c9 S390: ccw support for virsh attach-disk address parameter
Adding ccw bus address support to the optional address parameter of virsh
attach-disk. The format used is ccw:cssid. ssid.devno, e.g.
ccw:0xfe.0x0.0x0201

Virtio-ccw devices must have their cssid set to 0xfe.

Signed-off-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-02-09 14:22:23 +01:00
Daniel P. Berrange
d7565bd8aa virsh: add support for domain XML validation
The 'virsh edit' command gets XML validation enabled by default,
with a --skip-validate option to disable it. The 'virsh define'
and 'virsh create' commands get a --validate option to enable
it, to avoid regressions for existing scripts.

The quality of error reporting from libxml2 varies depending
on the type of XML error made. Sometimes it is quite clear
and useful, other times it is obscure & inaccurate. At least
the user will see an error now, rather than having their
XML modification silently disappear.
2015-01-16 11:07:59 +00:00
Hao Liu
a0670aef37 virsh: Emit error for VSH_OT_DATA without VSH_OFLAG_REQ
Commit 6b9964 enforces checking invalid use of VSH_OT_STRING with
VSH_OFLAG_REQ. This commit tries to do the same thing to stop using
VSH_OT_DATA without VSH_OFLAG_REQ and also fix existing misuse.

Signed-off-by: Hao Liu <hliu@redhat.com>
2015-01-12 13:38:42 +01:00
Tomoki Sekiyama
fadfcd9164 virsh: expose virDomainGetFSInfo
Add a "domfsinfo" command that shows a list of filesystems info mounted in
the guest. For example:

virsh # domfsinfo vm1
Mountpoint                           Name     Type     Target
-------------------------------------------------------------------
/                                    sda1     ext4     hdc
/opt                                 dm-2     vfat     vda,vdb
/mnt/test                            sdb1     xfs      sda

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
2014-11-24 10:29:16 -05:00
Peter Krempa
1a4609101b event: Add guest agent lifecycle event
As qemu is now able to notify us about change of the channel state used
for communication with the guest agent we now can more precisely track
the state of the guest agent.

To allow notifying management apps this patch implements a new event
that will be triggered on changes of the guest agent state.
2014-11-24 15:39:17 +01:00
Martin Kletzander
4c1b9e22b9 virsh: sync domdisplay help and manual
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-11-21 12:56:44 +01:00
Eric Blake
0d5168392f build: avoid 32-bit failure on older gcc
On 32-bit platforms with old gcc (hello RHEL 5 gcc 4.1.2), the
build fails with:
virsh-domain.c: In function 'cmdBlockCopy':
virsh-domain.c:2172: warning: comparison is always false due to limited range of data type

Adjust the code to silence the warning.

* tools/virsh-domain.c (cmdBlockCopy): Pacify RHEL 5 gcc.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-20 08:32:30 -07:00
Erik Skultety
8312d44d72 virsh: Fix msg: blockjob is aborted from another client
When a block{pull, copy, commit} is aborted via keyboard interrupt,
the job is properly canceled followed by proper error message.
However, when the job receives an abort from another client connected
to the same domain, the error message incorrectly indicates that
a blockjob has been finished successfully, though the abort request
took effect. This patch introduces a new blockjob abort handler, which
is registered when the client calls block{copy,commit,pull} routine,
providing its caller the status of the finished blockjob.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135442
2014-11-20 13:32:59 +01:00
Eric Blake
eb9093763f maint: forbid 'int foo = true'
I noticed this while working on qemuDomainGetBlockInfo.  Assigning
a bool value to an int variable compiles fine, but raises red flags
on the maintenance front as it becomes too easy to assign -1 or 2
or any other non-bool value to the same variable.

* cfg.mk (sc_prohibit_int_assign_bool): New rule.
* src/conf/snapshot_conf.c (virDomainSnapshotRedefinePrep): Fix
offenders.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo)
(qemuDomainSnapshotCreateXML): Likewise.
* src/test/test_driver.c (testDomainSnapshotAlignDisks):
Likewise.
* src/util/vircgroup.c (virCgroupSupportsCpuBW): Likewise.
* src/util/virpci.c (virPCIDeviceBindToStub): Likewise.
* src/util/virutil.c (virIsCapableVport): Likewise.
* tools/virsh-domain-monitor.c (cmdDomMemStat): Likewise.
* tools/virsh-domain.c (cmdBlockResize, cmdScreenshot)
(cmdInjectNMI, cmdSendKey, cmdSendProcessSignal)
(cmdDetachInterface): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-11-19 08:20:39 -07:00
Martin Kletzander
91cc3d9570 Remove unnecessary curly brackets in tools/
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-11-14 17:13:36 +01:00
Martin Kletzander
e09f9e4c32 virsh: Convert EDIT_NOT_CHANGED macro to do-while block.
This macro is being used as an inline body after an if and might get
pretty confusing.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-11-14 17:13:00 +01:00
Martin Kletzander
11d9dd1ad8 virsh: Reorder some options
According to comments in parsing functions, optional options should be
specified *after* required ones.  It makes sense and help output looks
cleaner.  The only exceptions are options with type == VSH_OT_ARGV.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-11-13 15:44:23 +01:00
Hao Liu
12bd207e21 Fix invalid log, misused option types and a typo
This patch fixes the following issues.

1)  When an invalid wwn is introduced, libvirt reports
    "Malformed wwn: %s". The template won't be replaced.

2)  "target" option for dompmsuspend and "xml" option for
    save-image-define are required options and should use
    VSH_OT_DATA instead of VSH_OT_STRING as an option type.

3)  A typo.

Signed-off-by: Hao Liu <hliu@redhat.com>
2014-11-11 11:05:43 +01:00
Matthias Gatto
72f808c41f virsh: Add bps_max and friends to virsh
Add the new throttle options to virsh, and send them to libvirt.

Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
2014-11-10 17:19:25 +01:00
Hao Liu
78d4c18440 virsh: Fix types for option bandwidth in block*
Bandwidth options in blockcommit, blockcopy, blockjob and blockpull
are parsed by vshCommandOptULWrap() and should be shown as a number
type option.

And a typo is fixed.

Signed-off-by: Hao Liu <hliu@redhat.com>
2014-11-06 09:37:20 +01:00
Eric Blake
0585332430 maint: avoid static zero init in tools
C guarantees that static variables are zero-initialized.  Some older
compilers (and also gcc -fno-zero-initialized-in-bss) create larger
binaries if you explicitly zero-initialize a static variable.

* tools/virsh-console.c (got_signal): Drop unused variable.
* tools/virsh-domain.c: Fix initialization.
* tools/virsh.c: Likewise.
* tools/virt-host-validate-common.c (virHostMsgWantEscape):
Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-10-29 09:55:09 -06:00
Shanzhi Yu
d8415b5469 virsh: Improve the job type reported of virsh cmd blockcommit
When starting an active block commit job in virsh, it will report
"Block Commit started", but for more precise message it could
report "Active Block Commit started".

Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-10-29 00:16:32 +01:00
Peter Krempa
4d1852c485 virsh: domain: Use global constant for XML file size limit
Few places still used hardcoded limit for maximum XML size for commands
that accept XML files. The hardcoded limits ranged from 8k to 1M. Use
VSH_MAX_XML_FILE to express this limit in a unified way. This will bump
the limit for the commands that used hardcoded string lengths to 10M.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1152427
2014-10-14 10:04:31 +02:00