Call the vcpu thread info validation separately to decrease complexity
of returned values by qemuDomainRefreshVcpuInfo.
This function now returns 0 on success and -1 on error. Certain
failures of qemu to report data are still considered as success. Any
error reported now is fatal.
Validate the presence of the thread id according to state of the vCPU
rather than just checking the vCPU count. Additionally put the new
validation code into a separate function so that the information
retrieval can be split from the validation.
Long, long ago before libxl_get_required_shadow_memory() was
made publicly available, its code was copied to the libxl driver
for calculating shadow memory requirements of HVM domains.
Long ago, libxl_get_required_shadow_memory() was exported in
libxl_utils.h and included in xen-devel packages everywhere.
Remove the copied code, which has become stale, and let libxl
provode a proper shadow memory value.
https://bugzilla.redhat.com/show_bug.cgi?id=1356937
Add support for IOThread quota/bandwidth and period parameters for non
session mode. If in session mode, then error out. Uses all the same
places where {vcpu|emulator|global}_{period|quota} are adjusted and
adds the iothread values.
https://bugzilla.redhat.com/show_bug.cgi?id=1356937
Add the definitions to allow for viewing/setting cgroup period and quota
limits for IOThreads.
This is similar to the work done for emulator quota and period by
commit ids 'b65dafa' and 'e051c482'.
Being able to view/set the IOThread specific values is related to more
recent changes adding global period (commmit id '4d92d58f') and global
quota (commit id '55ecdae') definitions and qemu support (commit id
'4e17ff79' and 'fbcbd1b2'). With a global setting though, if somehow
the IOThread value in the cgroup hierarchy was set "outside of libvirt"
to a value that is incompatible with the global value.
Allowing control over IOThread specific values provides the capability
to alter the IOThread values as necessary.
If you invoke virDomainLxcEnterSecurityLabel() on security
model of "none" it will report an error. Logically a "none"
security model should be treated as a no-op, so we should
just return success immediately, instead of an error.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The prettified JSON string already contains a newline so don't print
another one. This allows to pipe the json output (in conjunction with
the --quiet option) to files without having to truncate them afterwards.
Failure to parse the schema file would not trigger a test suite failure.
In addition to making the test fail it's necessary to split up the
parsing of the schema file into a separate test.
This is necessary as the XML validator uses libvirt errors to report
problems parsing of the actual schema RNG needs to be split out into a
separate function and called via virTestRun which has the
infrastructure to report them.
https://bugzilla.redhat.com/show_bug.cgi?id=1289391
Rather than pass the whole drive string (which contained the alias),
pass only the alias for the qemuMonitorDriveDel call in the error
path when adding a host device in the monitor fails.
Partial fix for:
https://bugzilla.redhat.com/show_bug.cgi?id=1336225
Similar to the other disk types, add the qemuMonitorDriveDel in the failure
to add/hotplug a USB.
Added a couple of other formatting changes just to have a less cluttered look
Move QEMU_DRIVE_HOST_PREFIX into the qemu_alias.c to dissuade future
callers from using it. Create qemuAliasDiskDriveSkipPrefix in order
to handle the current consumers that desire to check if an alias has
the drive- prefix and "get beyond it" in order to get the disk alias.
Since we already have a function that will generate the drivestr from
the alias, let's use it and remove the qemuDeviceDriveHostAlias.
Move the QEMU_DRIVE_HOST_PREFIX definition into qemu_alias.h
Also alter qemuAliasFromDisk to use the QEMU_DRIVE_HOST_PREFIX instead
of "drive-%s".
Rather than pass the disks[i]->info.alias to qemuMonitorSetDrivePassphrase
and then generate the "drive-%s" alias from that, let's use qemuAliasFromDisk
prior to the call to generate the drive alias and then pass that along
thus removing the need to generate the alias from the monitor code.
Node device lifecycle event API entry points for registering and
deregistering node deivce events, as well as types of events
associated with node device.
These entry points will be used for implementing asynchronous
lifecycle events.
Node device API:
virConnectNodeDeviceEventRegisterAny
virConnectNodeDeviceEventDeregisterAny
virNodeDeviceEventLifecycleType which has events CREATED and DELETED
As commit id 'e2b86f580' notes, when mode=agent possibly setting the
fake reboot flag to true wouldn't be necessary; however, it doesn't
"force" the issue by just ensuring the fake reboot is false, so this
patch adds the explicit setting for the reboot path.
More investigation and details can be found in commit id '8be502fd'
as well as in the archives at:
https://www.redhat.com/archives/libvir-list/2015-April/msg00715.html
Conditional setting of the fake reboot flag should only happen for
the acpi mode shutdown path; however, for the agent mode shutdown,
the fake reboot should be cleared. This patch will essentially revert
commit id '8be502fd', but adds an explicit setting of the flag to false
when using mode=agent while also only conditionally setting the reboot
flag if the guest went away. This also avoids an issue where a shutdown
with reboot semantics is done from agent mode which sets the reboot
flag followed by a shutdown from within the guest which would result
in a reboot due to the fake reboot flag being set. The change will
also properly handle the cases described in the following archive post:
https://www.redhat.com/archives/libvir-list/2015-April/msg00715.html
Commit id '44304c6eb' added the API libxlDomainAttachControllerDevice
inside a conditional LIBXL_HAVE_PVUSB, but called that function outside
the conditional in libxlDomainAttachDeviceLive.
Similarly, the API libxlDomainDetachControllerDevice was added inside a
conditional LIBXL_HAVE_PVUSB, but called outside the conditional in
libxlDomainDetachDeviceLive.
This patch adds the conditional LIBXL_HAVE_PVUSB around those two calls
from within the switch.
Prior to commit 2737aaaf, we allowed every client to connect successfully,
however, if accepting a client would eventually lead to an overcommit of the
limits, we would disconnect it immediately with "Too many active clients,
dropping connection from...". Recent changes refactored the code in a way, that
it is not possible for the client-related callback to be dispatched and the
client to be accepted if the limits wouldn't permit to do so, therefore a check
if a connection should be dropped due to limits violation has become a dead
code that could be removed.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Commit 2737aaaf changed our policy for accepting new clients in a way, that
instead of accepting new clients only to disconnect them immediately, since
that would overcommit the limit, we temporarily disable polling for the
dedicated file descriptor, so any new connection will queue on the socket.
Commit 8b1f0469 then added the possibility to change the limits during runtime
but it didn't re-enable polling for the previously disabled file descriptor,
thus any new connection would still continue to queue on the socket. This patch
forces an update of the services each time the limits were changed in some way.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1357776
Signed-off-by: Erik Skultety <eskultet@redhat.com>
So far, virNetServerCheckLimits was only used to possibly re-enable accepting
new clients that might have previously been disabled due to client limits
violation (max_clients, max_anonymous_clients). This patch refactors
virNetServerAddClient, which is currently the only place where the services get
disabled, in order to use the virNetServerCheckLimits helper instead of
checking the limits by itself.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since virNetServerAddClient checks for the limits in order to temporarily
suspend the services, thus not accepting any more clients, there is no reason
why virNetServerCheckLimits, which is only responsible for re-enabling
previously disabled services according to the limits, could not do both. To be
able to do that however, it needs to be moved up in the file since it's static
(and because it's just a helper and there's only one caller it should remain
static).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In case of error, libxlReconnectDomain may call
virDomainObjListRemoveLocked. However it has no local reference on
the domain object, leading to segfault. Get a reference to the domain
object at the start of the function and release it at the end to avoid
problems.
This commit also factorizes code between the error and normal ends.
To sync with virDomainControllerModelUSB, we add two models
in qemuControllerModelUSB 'qusb1' and 'qusb2', but those
models are not supported in qemu driver. So add check in
device post parse to report errors if 'qusb1' and 'qusb2'
are specified.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
libxl configuration files conversion can now handle USB controllers.
When parting libxl config file, USB controllers with type PV are
ignored as those aren't handled.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
When hotplugging a USB device, check if there is an available controller
and port, if not, automatically create a USB controller of version
2.0 and 8 ports.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Support USB controller hot-plug and hot-unplug.
#virsh attach-device dom usbctrl.xml
#virsh detach-device dom usbctrl.xml
usbctrl.xml example:
<controller type='usb' index='0' model='qusb2'>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
