This patch provides AppArmor policy updates for the QEMU bridge helper.
The QEMU bridge helper is a SUID executable exec'd by QEMU that drops
capabilities to CAP_NET_ADMIN and adds a tap device to a network bridge.
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant<coreyb@linux.vnet.ibm.com>
some system call and signal will interrupt poll,
making event loop stops and fails to react events and keepalive message
from libvirt.
adding handling EINTR to poll to make it more robust
Signed-off-by: Royce Lv <lvroyce@linux.vnet.ibm.com>
When the guest changes its memory balloon applications may want
to know what the new value is, without having to periodically
poll on XML / domain info. Introduce a "balloon change" event
to let apps see this
* include/libvirt/libvirt.h.in: Define the
virConnectDomainEventBalloonChangeCallback callback
and VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE constant
* python/libvirt-override-virConnect.py,
python/libvirt-override.c: Wire up helpers for new event
* daemon/remote.c: Helper for serializing balloon event
* examples/domain-events/events-c/event-test.c,
examples/domain-events/events-python/event-test.py: Add
example of balloon event usage
* src/conf/domain_event.c, src/conf/domain_event.h: Handling
of balloon events
* src/remote/remote_driver.c: Add handler of balloon events
* src/remote/remote_protocol.x: Define wire protocol for
balloon events
* src/remote_protocol-structs: Likewise.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A while back I wrote the attached code to demonstrate how to use
events and serial console to create a serial console that stays up
even when the VM is down. It might need some work, as I am not
terribly strong with Python.
* examples/python/consolecallback.py: New file.
* examples/python/Makefile.am (EXTRA_DIST): Ship it.
* libvirt.spec.in: Remove obsolete --with-remote-pid-file arg.
Add missing %{without_libxl} statement. Fix handling of docs
in client only build. Put systemtap files in -client RPM
instead of -daemon RPM
* examples/xml/nwfilter/Makefile.am: Don't install examples if
nwfilter is disabled.
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:
List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$'
Found files were modified with this command:
sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Then checked for nonsense.
The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
This introduces a new running reason VIR_DOMAIN_RUNNING_WAKEUP,
and new suspend event type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
While a wakeup event is emitted, the domain which entered into
VIR_DOMAIN_PMSUSPENDED will be transferred to "running"
with reason VIR_DOMAIN_RUNNING_WAKEUP, and a new domain lifecycle
event emitted with type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
This patch introduces a new event type for the QMP event
SUSPEND:
VIR_DOMAIN_EVENT_ID_PMSUSPEND
The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:
typedef void
(*virConnectDomainEventSuspendCallback)(virConnectPtr conn,
virDomainPtr dom,
int reason,
void *opaque);
"reason" is unused currently, always passes "0".
This patch introduces a new event type for the QMP event
WAKEUP:
VIR_DOMAIN_EVENT_ID_PMWAKEUP
The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:
typedef void
(*virConnectDomainEventWakeupCallback)(virConnectPtr conn,
virDomainPtr dom,
int reason,
void *opaque);
"reason" is unused currently, always passes "0".
This patch introduces a new event type for the QMP event
DEVICE_TRAY_MOVED, which occurs when the tray of a removable
disk is moved (i.e opened or closed):
VIR_DOMAIN_EVENT_ID_TRAY_CHANGE
The event's data includes the device alias and the reason
for tray status' changing, which indicates why the tray
status was changed. Thus the callback definition for the event
is:
enum {
VIR_DOMAIN_EVENT_TRAY_CHANGE_OPEN = 0,
VIR_DOMAIN_EVENT_TRAY_CHANGE_CLOSE,
\#ifdef VIR_ENUM_SENTINELS
VIR_DOMAIN_EVENT_TRAY_CHANGE_LAST
\#endif
} virDomainEventTrayChangeReason;
typedef void
(*virConnectDomainEventTrayChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *devAlias,
int reason,
void *opaque);
Unlike .cvsignore under CVS, git allows for ignoring nested
names. We weren't very consistent where new tests were
being ignored (some in .gitignore, some in tests/.gitignore),
and I found it easier to just consolidate everything.
* .gitignore: Subsume entries from subdirectories.
* daemon/.gitignore: Delete.
* docs/.gitignore: Likewise.
* docs/devhelp/.gitignore: Likewise.
* docs/html/.gitignore: Likewise.
* examples/dominfo/.gitignore: Likewise.
* examples/domsuspend/.gitignore: Likewise.
* examples/hellolibvirt/.gitignore: Likewise.
* examples/openauth/.gitignore: Likewise.
* examples/domain-events/events-c/.gitignore: Likewise.
* include/libvirt/.gitignore: Likewise.
* src/.gitignore: Likewise.
* src/esx/.gitignore: Likewise.
* tests/.gitignore: Likewise.
* tools/.gitignore: Likewise.
Execute bit on *.stp files in examples/systemtap/ caused dependency when
building RPM packages. Disabling execute permission should help the auto
dependency resolver to see that systemtap is not needed.
Fix a typing error in the no-ip-spoofing filter.
Return DHCP request packets passing through this filter. Have
the user use another filter to actually allow DHCP requests to be
sent (action='accept').
With fragments borrowed from David Steven's previous submission and some
further modifications:
A set of modifications to filters to handle multiple IP addresses
(and MAC addresses) per interface.
Also:
- enable DHCP traffic from VM to any DHCP server
- will require an update to a libvirt-tck data file
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Add APIs to the virNetSocket object, to allow file descriptors
to be sent/received over UNIX domain socket connections
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h,
src/libvirt_private.syms: Add APIs for FD send/recv
This change adds some systemtap/dtrace probes to the QEMU monitor
client code. In particular it allows watching of all operations
for a VM
* examples/systemtap/qemu-monitor.stp: Watch all monitor commands
* src/Makefile.am: Passing libdir/bindir/sbindir to dtrace2systemtap.pl
* src/dtrace2systemtap.pl: Accept libdir/bindir/sbindir as args
and look for '# binary:' comment to mark probes against libvirtd
vs libvirt.so
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor_json.c,
src/qemu/qemu_monitor_text.c: Add probes for key functions
If a disk source gets dropped because it is not accessible,
mgmt application might want to be informed about this. Therefore
we need to emit an event. The event presented in this patch
is however a bit superset of what written above. The reason is simple:
an intention to be easily expanded, e.g. on 'user ejected disk
in guest' events. Therefore, callback gets source string and disk alias
(which should be unique among a domain) and reason (an integer);
Add support for enabling debug output via command line option.
Allow to toggle the loop implementation between pure-Python and
native-C.
Signed-off-by: Philipp Hahn <hahn@univention.de>
When --help is requested, print usage() to stdout.
When an illegal option is passed, print usage to stderr.
Signed-off-by: Philipp Hahn <hahn@univention.de>
sys.argv contains the original command line arguments, while args only
contains the arguments not handled by getopt(). Currently this is no
problem since --help is the only command line option passable, which
terminates the process, so the code is never reached. Any option added
in the future will reveal the bug.
Signed-off-by: Philipp Hahn <hahn@univention.de>
This removes the old example for legacy probes and adds two
new scripts demonstrating many of the new probe point facilities.
The rpc-monitor.stp script will print out friendly details of all
RPC traffic between a libvirt client/server. This is incredibly
useful in seeing what RPC calls are being made, and also debugging
problems in the RPC protocol code
The events.stp script will print out lots of info about the poll
event loop, which is useful for debugging event handling problems
* examples/systemtap/events.stp, examples/systemtap/rpc-monitor.stp:
New examples
* examples/systemtap/client.stp: Remove obsolete example
There are two classes of management apps that track events - one
that only cares about on/off (and only needs to track EVENT_STARTED
and EVENT_STOPPED), and one that cares about paused/running (also
tracks EVENT_SUSPENDED/EVENT_RESUMED). To keep both classes happy,
any transition that can go from inactive to paused must emit two
back-to-back events - one for started and one for suspended (since
later resuming of the domain will only send RESUMED, but the first
class isn't tracking that).
This also fixes a bug where virDomainCreateWithFlags with the
VIR_DOMAIN_START_PAUSED flag failed to start paused when restoring
from a managed save image.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_EVENT_SUSPENDED_RESTORED)
(VIR_DOMAIN_EVENT_SUSPENDED_FROM_SNAPSHOT)
(VIR_DOMAIN_EVENT_RESUMED_FROM_SNAPSHOT): New sub-events.
* src/qemu/qemu_driver.c (qemuDomainRevertToSnapshot): Use them.
(qemuDomainSaveImageStartVM): Likewise, and add parameter.
(qemudDomainCreate, qemuDomainObjStart): Send suspended event when
starting paused.
(qemuDomainObjRestore): Add parameter.
(qemuDomainObjStart, qemuDomainRestoreFlags): Update callers.
* examples/domain-events/events-c/event-test.c
(eventDetailToString): Map new detail strings.
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.
* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
In the Ubuntu development release we recently got a new udev that
moves /var/run to /run, /var/lock to /run/lock and /dev/shm to /run/shm.
This change in udev requires updating the apparmor security driver in
libvirt[1].
Attached is a patch that:
* adjusts src/security/virt-aa-helper.c to allow both
LOCALSTATEDIR/run/libvirt/**/%s.pid and /run/libvirt/**/%s.pid. While
the profile is not as precise, LOCALSTATEDIR/run/ is typically a symlink
to /run/ anyway, so there is no additional access (remember that
apparmor resolves symlinks, which is why this is still required even
if /var/run points to /run).
* adjusts example/apparmor/libvirt-qemu paths for /dev/shm
[1]https://launchpad.net/bugs/810270
--
Jamie Strandboge | http://www.canonical.com
Add libvirt support for MicroBlaze architecture as a QEMU target. Based on mips/mipsel pattern.
Signed-off-by: John Williams <john.williams@petalogix.com>
If registering our own event loop implementation written in python,
any handles or timeouts callbacks registered by libvirt C code must
be wrapped in a python function. There is some argument trickery that
makes this all work, by wrapping the user passed opaque value in
a tuple, along with the callback function.
Problem is, the current setup requires the user's event loop to know
about this trickery, rather than just treating the opaque value
as truly opaque.
Fix this in a backwards compatible manner, and adjust the example
python event loop to do things the proper way.
This introduces a new domain
VIR_DOMAIN_EVENT_ID_CONTROL_ERROR
Which uses the existing generic callback
typedef void (*virConnectDomainEventGenericCallback)(virConnectPtr conn,
virDomainPtr dom,
void *opaque);
This event is intended to be emitted when there is a failure in
some part of the domain virtualization system. Whether the domain
continues to run/exist after the failure is an implementation
detail specific to the hypervisor.
The idea is that with some types of failure, hypervisors may
prefer to leave the domain running in a "degraded" mode of
operation. For example, if something goes wrong with the QEMU
monitor, it is possible to leave the guest OS running quite
happily. The mgmt app will simply loose the ability todo various
tasks. The mgmt app can then choose how/when to deal with the
failure that occured.
* daemon/remote.c: Dispatch of new event
* examples/domain-events/events-c/event-test.c: Demo catch
of event
* include/libvirt/libvirt.h.in: Define event ID and callback
* src/conf/domain_event.c, src/conf/domain_event.h: Internal
event handling
* src/remote/remote_driver.c: Receipt of new event from daemon
* src/remote/remote_protocol.x: Wire protocol for new event
* src/remote_protocol-structs: add new event for checks
This patch enables filtering of gratuitous ARP packets using the following XML:
<rule action='accept' direction='in' priority='425'>
<arp gratuitous='true'/>
</rule>
Use of ',##__VA_ARGS__' is a gcc extension not guaranteed by
C99; thankfully, we can avoid it by lumping the format argument
into the var-args set.
* src/util/logging.h (VIR_DEBUG_INT, VIR_INFO_INT, VIR_WARN_INT)
(VIR_ERROR_INT, VIR_DEBUG, VIR_INFO, VIR_WARN, VIR_ERROR): Stick
to C99 var-arg macro syntax.
* examples/domain-events/events-c/event-test.c (VIR_DEBUG):
Simplify.
These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.
How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.
example: origin after CPP
high_level_api("%d", a_int) low_level_api("%d", a_int)
high_level_api("a string") low_level_api("a string")
About 400 conversions.
8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
(for security) 6 conversions
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
printf on Win32 does not necessarily support %lld and we don't
have GNULIBs wrapper for printf(). Switch to use asprintf() for
which we do have a gnulib wrapper with %lld support
* examples/domain-events/events-c/event-test.c: Fix formatting
of %lld on Win32
* cfg.mk: Don't require use of virAsprintf since this is an
example app for out of tree users to follow
The example C event loop code is a nasty hack and not compliant
with the require API semantics. Delete this, so that developers
don't mistakenly copy it. Instead call the new public event loop
APIs.
Update the python event loop example, so that it can optionally
use the public event APIs, as an alternative to the pure python
code. The pure python event code is a good working example, so
don't delete it.
Also make the python example use a read only connection to avoid
authentication prompts
* examples/domain-events/events-c/event-test.c: Replace event
loop code with use of public APIs
* examples/domain-events/events-python/event-test.py: Allow
optional use of new public event APIs
Done mechanically with:
$ git grep -l '\bDEBUG0\? *(' | xargs -L1 sed -i 's/\bDEBUG0\? *(/VIR_&/'
followed by manual deletion of qemudDebug in daemon/libvirtd.c, along
with a single 'make syntax-check' fallout in the same file, and the
actual deletion in src/util/logging.h.
* src/util/logging.h (DEBUG, DEBUG0): Delete.
* daemon/libvirtd.h (qemudDebug): Likewise.
* global: Change remaining clients over to VIR_DEBUG counterpart.
If the event loop takes a very long time todo something, it is
possible for the 'self pipe' buffer to become full at which
point the entire event loop + remote driver deadlock. Use a
boolean flag to ensure we have strict one-in, one-out behaviour
on writes/reads of the 'self pipe'
The dominfo.py example script has a bogus check for /proc/xen
existing. The default connection cannot be assumed to be Xen
any more
* examples/python/dominfo.py: Remove check for Xen
This is more flexible regarding the location of the python binary
but doesn't allow to pass the -u flag. The -i flag can be passed
from inside the script using the PYTHONINSPECT env variable.
This fixes a problem with the esx_vi_generator.py on FreeBSD.
It is useful to know where the client is connecting from,
so include the socket address in probe data.
* daemon/libvirtd.h: Use virSocketAddr for storing client
address and keep printable address handy for logging
* daemon/libvirtd.c: Include socket address in client
connect/disconnect probes
* daemon/probes.d: Add socket address to probes
* examples/systemtap/client.stp: Print socket address
* src/util/network.h: Add sockaddr_un to virSocketAddr union
Adds initial support for dtrace static probes in libvirtd
daemon, assuming use of systemtap dtrace compat shim on
Linux. The probes are inserted for network client connect,
disconnect, TLS handshake states and authentication protocol
states.
This can be tested by running the xample program and then
attempting to connect with any libvirt client (virsh,
virt-manager, etc).
# stap examples/systemtap/client.stp
Client fd=44 connected readonly=0
Client fd=44 auth polkit deny pid:24997,uid:500
Client fd=44 disconnected
Client fd=46 connected readonly=1
Client fd=46 auth sasl allow test
Client fd=46 disconnected
The libvirtd.stp file should also really not be required,
since it is duplicated info that is already available in
the main probes.d definition file. A script to autogenerate
the .stp file is needed, either in libvirtd tree, or better
as part of systemtap itself.
* Makefile.am: Add examples/systemtap subdir
* autobuild.sh: Disable dtrace for mingw32
* configure.ac: Add check for dtrace
* daemon/.gitignore: Ignore generated dtrace probe file
* daemon/Makefile.am: Build dtrace probe header & object
files
* daemon/libvirtd.stp: SystemTAP convenience probeset
* daemon/libvirtd.c: Add connect/disconnect & TLS probes
* daemon/remote.c: Add SASL and PolicyKit auth probes
* daemon/probes.d: Master probe definition
* daemon/libvirtd.h: Add convenience macro for probes
so that compilation is a no-op when dtrace is not available
* examples/systemtap/Makefile.am, examples/systemtap/client.stp
Example systemtap script using dtrace probe markers
* libvirt.spec.in: Enable dtrace on F13/RHEL6
* mingw32-libvirt.spec.in: Force disable dtrace
Partial reversion of commit 76d87a59, now that bootstrap is smarter.
* .gnulib: Update to latest, for poll and bootstrap fixes.
* bootstrap: Resync from gnulib.
* autogen.sh: Drop redundant tool checks; bootstrap does them
better, by honoring environment variables.
* examples/domain-events/events-c/Makefile.am (INCLUDES)
(event_test_LDADD): Use gnulib library during build.
* bootstrap.conf (gnulib_tool_option_extras): Revert --libtool
addition, now that updated bootstrap does it for us.
Reported by Justin Clift.
