Libvirtd has long had integration with avahi for advertising libvirtd
using mDNS when TCP/TLS listening is enabled. For a long time the
virt-manager application had support for auto-detecting libvirtds
on the local network using mDNS, but this was removed last year
commit fc8f8d5d7e3ba80a0771df19cf20e84a05ed2422
Author: Cole Robinson <crobinso@redhat.com>
Date: Sat Oct 6 20:55:31 2018 -0400
connect: Drop avahi support
Libvirtd can advertise itself over avahi. The feature is disabled by
default though and in practice I hear of no one actually using it
and frankly I don't think it's all that useful
The 'Open Connection' wizard has a disproportionate amount of code
devoted to this feature, but I don't think it's useful or worth
maintaining, so let's drop it
I've never heard of any other applications having support for using
mDNS to detect libvirtd instances. Though it is theoretically possible
something exists out there, it is clearly going to be a niche use case
in the virt ecosystem as a whole.
By removing avahi integration we can cut down the dependency chain for
the basic libvirtd install and reduce our code maint burden.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In libssh 0.9.0 functions ssh_is_server_known and ssh_write_knownhost
are marked as deprecated.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1722735
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We provide default values for both MODPROBE and RMMOD and thus
there is no way that their paths can be empty strings.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1710575
It may happen that the system where libvirt is built at doesn't
have udevadm binary but the one where it runs does have it.
If we change how udevadm is run in virWaitForDevices() then we
can safely pass a default value in m4 macro.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The udevsettle binary is no longer used anywhere as it was
replaced by 'udevadm settle'. There's no reason for us to even
check for it in configure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It has been exported by systemd commit
commit a571c23e954cb88cdd5faa28593b19bd7c340130
libudev: export udev_monitor_set_receive_buffer_size()
released in v183.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is the version of systemd RHEL/CentOS 7 uses:
https://repology.org/project/systemd/versions
Oldest tracked openSUSE distros have 228,
Ubuntu 16.04 has 229 and Gentoo's alternative eudev
has bumped the version to 219 back in 2015.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function was deprecated in udev 219 and all the supported OSes
don't have older version of udev or systemd.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 105756660f was too eager and did
not consider SLES 12 which still has 2.0.1 that does not ship
a pkg-config file.
Similar to how we check for readline, prefer pkg-config if available
and fall back to the old detection code if not found.
NB: this is not a clean revert because we're not reintroducing support
for YAJL 1.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Though it used to be called "Mac OS X" and "OS X" in the past,
it was never "MacOS X" nor "OS-X", and it's just "macOS" now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Unfortunately the data reported by pkg-config is not completely
accurate, so until the issue has been fixed in readline we need
to work around it in libvirt.
The good news is that we only need the fix to land in FreeBSD
ports and macOS homebrew before we can drop the kludge, so
we're talking months rather than years.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
With the 7.0 release, readline has finally started shipping
pkg-config support in the form of a readline.pc file.
Unfortunately, most downstreams have yet to catch up with this
change: among Linux distributions in particular, Fedora Rawhide
seems to be the only one installing it at the moment.
Non-Linux operating systems have been faring much better in
this regard: both FreeBSD (through ports) and macOS (through
homebrew) include pkg-config support in their readline package.
This is great news for us, since those are the platforms where
pkg-config is more useful on account of them installing headers
and libraries outside of the respective default search paths.
Our implementation checks whether readline is registered as a
pkg-config package, and if so obtains CFLAGS and LIBS using the
tool; if not, we just keep using the existing logic.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The first implementation of this logic was introduced with
commit 2ec759fc58 all the way back in 2007; looking at the
build logs from our CI environment, however, it's apparent
that none of the platforms we currently target are actually
using it, so we can assume whatever issue it was working
around has been fixed at some point in the last 12 years.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The current code is a bit awkward, and we're going to need
to share it later anyway. We can drop the call to AC_SUBST()
while we're at it, since LIBVIRT_CHECK_LIB() already marks
READLINE_CFLAGS for substitution.
The new code goes to some extra length to avoid setting
-D_FUNCTION_DEF twice: this is mostly for cosmetic reasons,
and it's necessary because LIBVIRT_CHECK_READLINE() is called
twice: once on its own, and then once more as part of
LIBVIRT_CHECK_BASH_COMPLETION().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The check was added in 74416b1d48 without offering any
explanation outside of the commit message. Introduce a comment
to make digging through the git history unnecessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since commit 4e75b0a00f we support SASL 2.1.26 and newer
releases only, all of which ship a .pc file. Using pkg-config
allows FreeBSD builds to pick up the dependency automatically.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The pkg-config file was introduced by commit b729ded which was released
in yajl 2.0.3.
Since all our supported platforms include at least yajl 2.0.4,
use pkg-config to detect the library and set the minimum to 2.0.3.
https://repology.org/project/yajl/versions
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Even Debian 8 which we no longer support has 2.1.26.
https://repology.org/project/cyrus-sasl/versions
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Running QEMU as root is a pretty bad idea, so try to make the
user aware of that as part of the configure summary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our current defaults are root:wheel on FreeBSD and macOS, root:root
everywhere else.
Looking at what downstream distributions actually do, we can see that
these defaults are overriden the vast majority of the time, with a
number of variations showing up in the wild:
* qemu:qemu -> Used by CentOS, Fedora, Gentoo, OpenSUSE, RHEL
and... As it turns out, our very own spec file :)
* libvirt-qemu:libvirt-qemu -> Used by Debian.
* libvirt-qemu:kvm -> Used by Ubuntu.
* nobody:nobody -> Used by Arch Linux.
Based on this information, we can do a better job at integrating with
downstream packages: if the distro-specific user and group already
exist on the system then we use them, and if not (or we're building
on an unknown OS) we just use root:root as we would have before.
This change makes it less likely that people building from source
will end up running their guests as root, which is a very desiderable
outcome from the security point of view.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The rbd_list method has been deprecated in Ceph >= 14.0.0
in favour of the new rbd_list2 method which populates an
array of structs.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we no longer support the weird "redhat+systemd"
configuration, we can make our code slightly simpler.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Despite the misleading name, these were supposed to be used
with a System V style init; however, none of the platforms we
target is using that kind of init anymore: almost all Linux
distributions have switched to systemd, those that haven't
(such as Gentoo and Alpine) are mostly using OpenRC with
custom init scripts, and the BSDs have been doing their own
thing all along.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Not a single one of the platforms we target still uses Upstart, and
the Upstart project itself has been abandoned for several years now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is no way that qemu driver can work without being able to
format/parse JSON.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The basic idea of our configure script is to probe for things
rather than have them enabled by default. This is even more
visible in the next commit where configure fails if qemu driver
is enabled but no yajl is found.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The code tries to detect installed version of qemu to learn if it
uses HMP or QMP and enable YAJL based on that. Well, we support
only QMP and also minimal required version of qemu is 1.5.0 so
the check would have enabled yajl anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The wireshark-2.4.0 is almost 2 years old now. Assuming anybody
interested in running latest libvirt doesn't run old wireshark,
it is safe to do this. It also simplifies the code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since wirshark-2.5.0 toplevel plugins are no longer loaded. Only
plugins from epan/, wiretap/ or codecs/ subdirs are. Update the
plugin dir we generate. This is safe to do even for older
wiresharks, since they load plugins from there too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the past (when both libvirt and firewalld used iptables), if either
libvirt's rules *OR* firewalld's rules accepted a packet, it would
be accepted. This was because libvirt and firewalld rules were
processed during the same kernel hook, and a single ACCEPT result
would terminate the rule traversal and cause the packet to be
accepted.
But now firewalld can use nftables for its backend, while libvirt's
firewall rules are still using iptables; iptables rules are still
processed, but at a different time during packet processing
(i.e. during a different hook) than the firewalld nftables rules. The
result is that a packet must be accepted by *BOTH* the libvirt
iptables rules *AND* the firewalld nftable rules in order to be
accepted.
This causes pain because
1) libvirt always adds rules to permit DNS and DHCP (and sometimes
TFTP) from guests to the host network's bridge interface. But
libvirt's bridges are in firewalld's "default" zone (which is usually
the zone called "public"). The public zone allows ssh, but doesn't
allow DNS, DHCP, or TFTP. So even though libvirt's rules allow the
DHCP and DNS traffic, the firewalld rules (now processed during a
different hook) dont, thus guests connected to libvirt's bridges can't
acquire an IP address from DHCP, nor can they make DNS queries to the
DNS server libvirt has setup on the host. (This could be solved by
modifying the default firewalld zone to allow DNS and DHCP, but that
would open *all* interfaces in the default zone to those services,
which is most likely not what the host's admin wants.)
2) Even though libvirt adds iptables rules to allow forwarded traffic
to pass the iptables hook, firewalld's higher level "rich rules" don't
yet have the ability to configure the acceptance of forwarded traffic
(traffic that is going somewhere beyond the host), so any traffic that
needs to be forwarded from guests to the network beyond the host is
rejected during the nftables hook by the default zone's "default
reject" policy (which rejects all traffic in the zone not specifically
allowed by the rules in the zone, whether that traffic is destined to
be forwarded or locally received by the host).
libvirt can't send "direct" nftables rules (firewalld only supports
direct/passthrough rules for iptables), so we can't solve this problem
by just sending explicit nftables rules instead of explicit iptables
rules (which, if it could be done, would place libvirt's rules in the
same hook as firewalld's native rules, and thus eliminate the need for
packets to be accepted by both libvirt's and firewalld's own rules).
However, we can take advantage of a quirk in firewalld zones that have
a default policy of "accept" (meaning any packet that doesn't match a
specific rule in the zone will be *accepted*) - this default accept will
also accept forwarded traffic (not just traffic destined for the host).
Of course we don't want to modify firewalld's default zone in that
way, because that would affect the filtering of traffic coming into
the host from other interfaces using that zone. Instead, we will
create a new zone called "libvirt". The libvirt zone will have a
default policy of accept so that forwarded traffic can pass and list
specific services that will be allowed into the host from guests (DNS,
DHCP, SSH, and TFTP).
But the same default accept policy that fixes forwarded traffic also
causes *all* traffic from guest to host to be accepted. To close this
new hole, the libvirt zone can take advantage of a new feature in
firewalld (currently slated for firewalld-0.7.0) - priorities for rich
rules - to add a low priority rule that rejects all local traffic (but
leaves alone all forwarded traffic).
So, our new zone will start with a list of services that are allowed
(dhcp, dns, tftp, and ssh to start, but configurable via any firewalld
management application, or direct editing of the zone file in
/etc/firewalld/zones/libvirt.xml), followed by a low priority
<reject/> rule (to reject all other traffic from guest to host), and
finally with a default policy of accept (to allow forwarded traffic).
This patch only creates the zonefile for the new zone, and implements
a configure.ac option to selectively enable/disable installation of
the new zone. A separate patch contains the necessary code to actually
place bridge interfaces in the libvirt zone.
Why do we need a configure option to disable installation of the new
libvirt zone? It uses a new firewalld attribute that sets the priority
of a rich rule; this feature first appears in firewalld-0.7.0 (unless
it has been backported to am earlier firewalld by a downstream
maintainer). If the file were installed on a system with firewalld
that didn't support rule priorities, firewalld would log an error
every time it restarted, causing confusion and lots of extra bug
reports.
So we add two new configure.ac switches to avoid polluting the system
logs with this error on systems that don't support rule priorities -
"--with-firewalld-zone" and "--without-firewalld-zone". A package
builder can use these to include/exclude the libvirt zone file in the
installation. If firewalld is enabled (--with-firewalld), the default
is --with-firewalld-zone, but it can be disabled during configure
(using --without-firewalld-zone). Targets that are using a firewalld
version too old to support the rule priority setting in the libvirt
zone file can simply add --without-firewalld-zone to their configure
commandline.
These switches only affect whether or not the libvirt zone file is
*installed* in /usr/lib/firewalld/zones, but have no effect on whether
or not libvirt looks for a zone called libvirt and tries to use it.
NB: firewalld zones can only be added to the permanent config of
firewalld, and won't be loaded/enabled until firewalld is restarted,
so at package install/upgrade time we have to restart firewalld. For
rpm-based distros, this is done in the libvirt.spec file by calling
the %firewalld_restart rpm macro, which is a part of the
firewalld-filesystem package. (For distros that don't use rpm
packages, the command "firewalld-cmd --reload" will have the same
effect).
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Support for firewalld is a feature that can be selectively enabled or
disabled (using --with-firewalld/--without-firewalld), not merely
something that must be accounted for in the code if it is present with
no exceptions. It is more consistent with other usage in libvirt to
use WITH_FIREWALLD rather than HAVE_FIREWALLD.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The driver is unmaintained, untested and severely broken for
quite some time now. Since nobody even reported any issue with it
let us drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since this is something between PV and HVM, it makes sense to put the
setting in place where domain type is specified.
To enable it, use <os><type machine="xenpvh">xenpvh</type></os>. It is
also included in capabilities.xml, for every supported HVM guest type - it
doesn't seems to be any other requirement (besides new enough Xen).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
With the assumption that all Xen >= 4.6 contains a pkgconfig file for
libxenlight, commit 5bdcef13 dropped the fallback check to probe
libxenlight with LIBVIRT_CHECK_LIB. At the time it was not known that
the various Xen pkgconfig files are in the -runtime package in Fedora,
instead of the traditional -devel package. This bug [1] was fixed in
Fedora > 28, but until Fedora 28 reaches EOL we'll need to re-introduce
the fallback check.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1629643
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The libxl_domain_config_from_json API appeared in Xen 4.5, hence
there is no need to check for its existence after changing the
minimum supported Xen version to 4.6. Remove the check and its
use in the tests.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently the libxl driver claims support for Xen >= 4.4, but
Xen 4.4 and 4.5 are no longer supported upstream. Let's increase
the minimum supported Xen version to 4.6 and change the defined
LIBXL_API_VERSION to 0x040500, which is the API version defined
when Xen 4.6 was released.
Since Xen 4.6 contains a pkgconfig file, drop the now unused code
that falls back to using LIBVIRT_CHECK_LIB in the absence of
pkgconfig file. In addition, bumping the LIBXL_API_VERSION
required adjusting the calls to libxl_set_vcpuaffinity to account
for the extra parameter in the 0x040500 version of the API.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit 9cf38263d0.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit c5ae8e0c2b.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 01ce04375c.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 4dd6054000.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fix saving CFLAGS in LIBVIRT_DRIVER_CHECK_LIBXL - LIBVIRT_CHECK_LIB will
override old_CFLAGS, so use a different name.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
We need here libiscsi for the storgae pool backend.
For the iscsi-direct storage pool, only checkPool and refreshPool should
be necessary for basic support.
The pool is state-less and just need the informations within the volume
to work.
Signed-off-by: Clementine Hayat <clem@lse.epita.fr>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introducing the pool as a noop. Integration inside the build
system. Implementation will be in the following commits.
Signed-off-by: Clementine Hayat <clem@lse.epita.fr>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The minimal required version is 1.18.0 because the synchrounous function
needed were introduced here.
Signed-off-by: Clementine Hayat <clem@lse.epita.fr>
The proper file that should be included is `sys/xattr.h` as that comes from
`glibc` and not `attr/xattr.h` which ships with the `attr` utility.
We're most probably not the only ones because `attr/xattr.h` added a #warning to
their include resulting in the following compilation errors:
In file included from securityselinuxlabeltest.c:31:0:
/usr/include/attr/xattr.h:5:2: error: #warning "Please change your <attr/xattr.h> includes to <sys/xattr.h>" [-Werror=cpp]
#warning "Please change your <attr/xattr.h> includes to <sys/xattr.h>"
^~~~~~~
In file included from securityselinuxhelper.c:37:0:
/usr/include/attr/xattr.h:5:2: error: #warning "Please change your <attr/xattr.h> includes to <sys/xattr.h>" [-Werror=cpp]
#warning "Please change your <attr/xattr.h> includes to <sys/xattr.h>"
^~~~~~~
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a second check for Jansson >= 2.8, which includes
fixes to preserve ordering of object keys.
Use this constant to guard tests that depend on stable ordering.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
