Commands in node device group moved from virsh.c to virsh-nodedev.c,
* virsh.c: Remove commands in node device group.
* virsh-nodedev.c: New file, filled with commands in node device group
* po/POTFILES.in: Add virsh-nodedev.c
* cfg.mk: Skip to check config.h including for virsh-nodedev.c
Commands in host group moved from virsh.c to virsh-host.c,
* virsh.c: Remove commands in host group.
* virsh-host.c: New file, filled with commands in host group
* po/POTFILES.in: Add virsh-host.c
* cfg.mk: Skip to check config.h including for virsh-host.c
Commands to manage domain snapshot are moved from virsh.c to
virsh-snapshot.c.
* virsh.c: Remove domain snapshot commands.
* virsh-snapshot.c: New file, filled with domain snapshot commands.
* po/POTFILES.in: Add virsh-snapshot.c
* cfg.mk: Skip strcase and config.h including checking for
virsh-snapshot.c
Commands to manage secret are moved from virsh.c to virsh-secret.c,
with a few helpers for secret command use.
* virsh.c: Remove secret commands and a few helpers.
(vshCommandOptSecret, and vshCommandOptSecretBy)
* virsh-secret.c: New file, filled with secret commands and its helpers.
* po/POTFILES.in: Add virsh-secret.c
* cfg.mk: Skip to check config.h including for virsh-secret.c
Commands to manage network filter are moved from virsh.c to virsh-nwfilter.c,
with a few helpers for network filter command use.
* virsh.c: Remove network filter commands and a few helpers.
(vshCommandOptNWFilter, and vshCommandOptNWFilterBy)
* virsh-nwfilter.c: New file, filled with network filter commands and its helpers.
* po/POTFILES.in: Add virsh-nwfilter.c
* cfg.mk: Skip to check config.h including for virsh-nwfilter.c
Commands to manage host interface are moved from virsh.c to
virsh-interface.c, with a few helpers for interface command use.
* virsh.c: Remove interface commands and a few helpers.
(vshCommandOptInterface, vshCommandOptInterfaceBy)
* virsh-interface.c: New file, filled with interface commands and
its helpers.
* cfg.mk: Skip to check config.h including for virsh-interface.c
* po/POTFILES.in: Add virsh-interface.c
Commands to manage network are moved from virsh.c to virsh-network.c,
with a few helpers for network command use.
* virsh.c: Remove network commands and a few helpers.
* virsh-network.c: New file, filled with network commands and its
helpers.
* po/POTFILES.in: Add virsh-network.c
* cfg.mk: Skip to check config.h including for virsh-network.c
This splits commands of storage pool group into virsh-pool.c,
The helpers not for common use are moved too. Standard copyright
is added for the new file.
* tools/virsh.c:
Remove commands for storage storage pool and a few helpers.
(vshCommandOptVol, vshCommandOptVolBy).
* tools/virsh-pool.c:
New file, filled with commands of storage pool group and its
helpers.
* po/POTFILES.in:
Add virsh-pool.c
* cfg.mk:
Skip to check config.h including for virsh-pool.c
This splits commands of storage volume group into virsh-volume.c,
The helpers not for common use are moved too. Standard copyright
is added for the new file.
* tools/virsh.c:
Remove commands for storage storage volume and a few helpers.
(vshCommandOptVol, vshCommandOptVolBy).
* tools/virsh-volume.c:
New file, filled with commands of storage volume group and its
helpers.
* po/POTFILES.in:
Add virsh-volume.c
* cfg.mk:
Skip to check config.h including for virsh-volume.c
This splits commands to manage domain into virsh-domain.c,The helpers
not for common use are moved into them too. Standard copyright is added
for the new file.
* tools/virsh.c:
- Remove commands for domain group, and one helper
(vshDomainVcpuStateToString)
- vshStreamSink is moved before commands's definition for it's
also used by commands not of domain group, such as volUpload.
* tools/virsh-domain.c:
- New file, commands for domain group and the one helper are
moved into it.
* po/POTFILES.in:
- Add virsh-domain.c
* cfg.mk:
- Skip to check config.h including for virsh-domain.c
This splits commands commands to monitor domain status into
virsh-domain-monitor.c. The helpers not for common use are moved too.
Standard copyright is added.
* tools/virsh.c:
- Remove commands for domain monitoring group and a few helpers (
vshDomainIOErrorToString, vshGetDomainDescription,
vshDomainControlStateToString, vshDomainStateToString) not for
common use.
- Remove (incldue "intprops.h").
* tools/virsh-domain-monitor.c:
- New file, filled with commands of domain monitor group.
- Add "intprops.h".
* cfg.mk:
- Skip strcase checking for virsh-domain-monitor.c
- Skip to check config.h including for virsh-domain-monitor.c
* po/POTFILES.in
- Add virsh-domain-monitor.c
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.
A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.
A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.
In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.
<disk type='network'>
...
<source protocol="sheepdog" name="vdi_name">
<host name="localhost" port="7000"/>
</source>
</disk>
To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer
then replace raw MAC addresses by replacing
- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr
and introduce usage of above functions where necessary.
Fix for a minor issue:
the sleep(1) statement was called twice,
effectively doubling the elapsed time
execution "virsh nodecpustats --percent".
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Instead of changing the existed virFileMakePath to accept mode
argument and modifying a pile of its uses, this patch introduces
virFileMakePathWithMode, and use it instead of mkdir() to create
the readline history dir.
In vshSnapshotListCollect() vshCalloc was called with swapped nmemb and
size argument. This caused division by zero in xalloc_oversized as the
macro doesn't expect size to be zero.
Fixed up virsh -V output by removing invalid WITH_PROXY & WITH_ONE
checks, adding several missing checks, and fixing the DTrace check.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
v2:
- Refactored to use virBuffer
- Refactored to use virXPath wrappers
- Added support for tls-port and password for SPICE
- Added optional flag to disable SPICE password to the URI
- Added support for RDP
- Fixed code reviews
Add a new 'domdisplay' command that provides a URI for VNC, SPICE and
RDP connections. Presently the 'vncdisplay' command provides you with
the port info that QEMU is listening on but there is no counterpart for
SPICE and RDP. Additionally this provides you with the bind address as
specified in the XML, which the existing 'vncdisplay' lacks. For SPICE
connections it supports secure and unsecure channels and optionally
providing the password for the SPICE channel.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Storage is one of the last domains in libvirt where we don't fully
utilize inactive and live XML. Okay, it might be because we don't
have support for that. So implement such support. However, we need
to fallback when talking to old daemon which doesn't support this
new flag called VIR_STORAGE_XML_INACTIVE.
The vshPrintRaw function is not used on Win32, and neither
is the 'msg' parameter of vshAskReedit. Change the nesting
of #ifdef WIN32 conditionals to address this
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the vncdisplay command to use the virXPath wrappers as well as
check if the domain is up rather than using the port set to -1 to mean
the domain is not up.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
This patch adds a check for the count of processors the user requests
for the guest machine so that invalid values produce a more helpful
error message.
This patch makes use of the newly added api virConnectListAllDomains()
to list domains in virsh.
Virsh now represents lists of domains using an internal structure
vshDomainList. This structure contains the virDomainPtr list as provided
by virConnectListAllDomains() and the count of domains in the list.
For backwards compatibility, the function vshDomainListCollect was added
that tries to enumerate the domains using the new API and if the API is
not supported falls back to the older approach with the two list
functions. The helper function also simulates filtering by all
currently supported flags added with virConnectListAllDomains().
This patch also cleans up the "list" command handler to use the new
helpers and adds new command line flags to make use of filtering.
Previously, to get the name of all snapshots with children, it was
necessary to get the name of all snapshots and then remove the
name of leaf snapshots. This is racy, and somewhat inefficient
compared to planned API additions. We can emulate --no-metadata on
0.9.5-0.9.12, but for now, there is no emulation of --no-leaves.
* tools/virsh.c (cmdSnapshotList): Add new options --no-leaves and
--no-metadata.
(vshSnapshotList): Emulate where possible.
* tools/virsh.pod (snapshot-list): Document them.
Append '(MAC Address)' after the help string of domiftune virsh
command as it takes the same type of argument as domif-{get,set}link
which have it specified.
Operating on a list of snapshot objects looks so much simpler.
In particular, since the helper function already trimmed out
irrelevant entries, we no longer have quite so many special cases
on finding the first snapshot to operate on. Also, vshTreePrint
no longer has a generic callback struct; both clients now pass
something different according to their own needs.
* tools/virsh.c (cmdSnapshotList): Use previous patches.
(vshTreeArrayLookup): Rename...
(vshNodeListLookup): ...now that it only has one client.
(cmdNodeListDevices): Adjust caller.
This patch is based on the fallback code out of cmdSnapshotList,
with tweaks to keep the snapshot objects around rather than just
their name, and to remove unwanted elements before returning.
It looks forward to a future patch when we add a way to list all
snapshot objects at once, and the next patch will simplify
cmdSnapshotList to take advantage of this factorization.
* tools/virsh.c (vshSnapshotList, vshSnapshotListFree): New functions.
Detected by valgrind:
==16217== 1 errors in context 1 of 12:
==16217== Invalid read of size 1
==16217== at 0x4A07804: __GI_strlen (mc_replace_strmem.c:284)
==16217== by 0x3019F167F6: xdr_string (in /lib64/libc-2.12.so)
==16217== by 0x3033709E8D: xdr_remote_nonnull_string (remote_protocol.c:31)
==16217== by 0x303370E5CB: xdr_remote_domain_update_device_flags_args (remote_protocol.c:2028)
==16217== by 0x30337197D1: virNetMessageEncodePayload (virnetmessage.c:341)
==16217== by 0x30337135E1: virNetClientProgramCall (virnetclientprogram.c:327)
==16217== by 0x30336F1EFD: callWithFD (remote_driver.c:4586)
==16217== by 0x30336F1F7B: call (remote_driver.c:4607)
==16217== by 0x30336F42F2: remoteDomainUpdateDeviceFlags (remote_client_bodies.h:2865)
==16217== by 0x30336D46E5: virDomainUpdateDeviceFlags (libvirt.c:9457)
==16217== by 0x41AEE8: cmdChangeMedia (virsh.c:15249)
==16217== by 0x413CB4: vshCommandRun (virsh.c:18669)
==16217== Address 0x4ec5e25 is 0 bytes after a block of size 293 alloc'd
==16217== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==16217== by 0x303364F1DB: virAllocN (memory.c:129)
==16217== by 0x41A844: vshPrepareDiskXML (virsh.c:15043)
==16217== by 0x41AECC: cmdChangeMedia (virsh.c:15246)
==16217== by 0x413CB4: vshCommandRun (virsh.c:18669)
==16217== by 0x423973: main (virsh.c:20261)
There is a little easter egg in virsh: one can easily clone
an object (domain, network, ...). Just 'virsh edit' change the name
and remove <uuid>. And then, in the end when reporting success
the new name was printed out.
However, with recent edit rewrite we lost the final part and are
still printing the original name out.
When printing reedit options we make stdin raw. However,
this results in stdout being raw as well. Therefore we need
to return carriage when doing new line. Unfortunately,
'\r' cannot be part of internationalized messages hence
we must move them to formatting string which then in turn
become huge and disarranged. To solve this, a new function
is introduced which takes variable string arguments and
prepend each with "\r\n" just before printing.
The attach-disk command used with parameter --cache created an invalid
XML snippet as the beginning of the <driver> element was not printed
when used solely with --cache and no other attribute to driver.
commit 52d064f42d added
VIR_NETWORK_XML_INACTIVE in order to allow suppressing the
auto-generated list of VFs in network definitions, and a --inactive
flag to virsh net-dumpxml to take advantage of the flag. However, it
missed out on two opportunities:
1) Use INACTIVE to get the current config of the network as it
exists on disk, rather than the currently active config.
2) Add INACTIVE to the flags used for the virsh net-edit command, so
that it won't include the forward-pool interfaces that were
autogenerated, and so that a re-edit of the network prior to
restarting it will show any other edits made since the last restart
of the network. (prior to this patch, if you edited a network a 2nd
time without restarting, all of the previous edits would magically
disappear).
In order to fit with the new #define-based generic edit function in
virsh.c, a new function vshNetworkGetXMLDesc() was added. This
function first tries to call virNetworkGetXMLDesc with the INACTIVE
flag added, then retries without if the first attempt fails (in the
manner expected when the server doesn't support it).
Expose the recent API additions in virsh. Borrows ideas from 'dominfo'
for the general type of information to display.
Output looks like:
$ tools/virsh snapshot-info fedora-local tmp
Name: tmp
Domain: fedora-local
Current: no
State: disk-snapshot
Parent: -
Children: 1
Descendants: 2
Metadata: yes
possibly with fewer lines when talking to older servers.
* tools/virsh.c (cmdSnapshotInfo): New command.
* tools/virsh.pod (snapshot-info): Document it.
Requiring the user to pass in parallel arrays of names and parents
is annoying; it means that you can't qsort one of the arrays without
invalidating the ordering of the other. By refactoring this function
to use callbacks, we isolate the layout to be independent of the
printing, and a future patch can exploit that to improve layout.
* tools/virsh.c (vshTreePrintInternal): Use callbacks rather than
requiring a char** array.
(vshTreeArrayLookup): New helper function.
(vshTreePrint, cmdNodeListDevices, cmdSnapshotList): Update callers.
I am not a fan of fixed-width buffers. All it takes is a
linear chain of more than 100 snapshots to mess up 'virsh
snapshot-list --tree'. Now that virBuffer is more powerful,
we might as well exploit its power.
* tools/virsh.c (cmdNodeListDevicesPrint): Simplify to use a
virBuffer instead of fixed-width prefix, factor guts, and rename...
(vshTreePrint, vshTreePrintInternal): ...along with new helper.
(cmdNodeListDevices, cmdSnapshotList): Update callers.
Commits 51082301, 16d7b39, and 521cc447 introduced support for
'virsh snapshot-list --from' when talking to a server older than
0.9.5, but broke support for plain 'virsh snapshot-list' for the
same old server in the process. Because the code is not properly
gated, we end up with a SIGSEGV during a strcmp with a NULL argument.
* tools/virsh.c (cmdSnapshotList): Don't waste time on fallbacks
when --from is not present.
If users *-edit but make a mistake in XML all changes are
permanently lost. However, if virsh is not running within
a script we can ask user if he wants to re-edit the file
and correct the mistakes.
Currently, we either generate some cmd*Edit commands (cmdPoolEdit
and cmdNetworkEdit) via sed script or copy the body of cmdEdit
(e.g. cmdInterfaceEdit, cmdNWFilterEdit, etc.). This fact makes
it harder to implement any new feature to our editing system.
Therefore switch to new implementation - define macros to:
- dump XML (EDIT_GET_XML)
- take an action if XML wasn't changed,
usually just vshPrint() (EDIT_NOT_CHANGED)
- define new object (EDIT_DEFINE) - the edited XML is in @doc_edited
- free object defined by EDIT_DEFINE (EDIT_FREE)
and #include "virsh-edit.c"
strncpy is generally evil - it runs the risk of missing NUL
termination, and more often than not wastes time zeroing way
more bytes than strictly necessary. We've avoided this evil
in our virStrncpy wrapper, except for places where we forgot
to use the wrapper; meanwhile, we have also added an even
higher layer wrapper for setting virTypedParameter values.
* tools/virsh.c (cmdMemtune, cmdBlkdeviotune): Use modern API.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_strncpy): Tighten.
Remove the uid param from virGetUserConfigDirectory,
virGetUserCacheDirectory, virGetUserRuntimeDirectory,
and virGetUserDirectory
These functions were universally called with the
results of getuid() or geteuid(). To make it practical
to port to Win32, remove the uid parameter and hardcode
geteuid()
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove a number of pointless checks against PATH_MAX and
add a syntax-check rule to prevent its use in future
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds support for a new storage backend with RBD support.
RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.
It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.
To function this backend relies on librbd and librados being present on the
local system.
The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.
For storing credentials it uses the built-in secret mechanism of libvirt.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Currently virDomainGetCPUStats gets total cpu usage, which consists
of:
1. vcpu usage: the physical cpu time consumed by virtual cpu(s) of
domain
2. hypervisor: `total cpu usage' - `vcpu usage'
The param 'vcpu_time' is for getting vcpu usages.
As defined in:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html
This offers a number of advantages:
* Allows sharing a home directory between different machines, or
sessions (eg. using NFS)
* Cleanly separates cache, runtime (eg. sockets), or app data from
user settings
* Supports performing smart or selective migration of settings
between different OS versions
* Supports reseting settings without breaking things
* Makes it possible to clear cache data to make room when the disk
is filling up
* Allows us to write a robust and efficient backup solution
* Allows an admin flexibility to change where data and settings are stored
* Dramatically reduces the complexity and incoherence of the
system for administrators
* tools/virsh.c (vshParseSnapshotDiskspec): Fix off-by-3 memmove
that would corrupt heap when parsing escaped --diskspec comma.
Bug introduced via commit v0.9.4-260-g35d52b5.
The recent push to use correct scaling terms (kB for 1000, KiB for
1024 - such as commit 9dfdead) missed some places in virsh.
* tools/virsh.c (prettyCapacity, cmdDominfo, cmdFreecell)
(cmdNodeinfo, cmdNodeMemStats, cmdMigrateSetMaxSpeed)
(cmdBlockCopy, cmdBlockPull, cmdBlockJob): Use KiB, not kB, when
referring to multiples of 1024.
* tests/virshtest.c: Update expected output to match.
https://bugzilla.redhat.com/show_bug.cgi?id=817244 mentions that
unlike most other tools, where --help or --version prevent all
further parsing of all later options, virsh was strange in that
--version stopped parsing but --help tried to plow on to the end.
There was no rationale for this original implementation (since
2005!), so I think we can safely conform to common usage patterns.
* tools/virsh.c (main): Drop useless 'help' variable.
Rather than further overloading 'blockpull', I decided to create a
new virsh command to expose the new flags of virDomainBlockRebase.
Blocking until the command completes naturally is pointless, since
the block copy job is intended to run indefinitely. Instead, I
made the command support three --wait modes: by default, it runs until
mirroring is started; with --pivot, it pivots as soon as mirroring
is started; and with --finish, it aborts (for a clean copy) as
soon as mirroring is started.
* tools/virsh.c (VSH_CMD_BLOCK_JOB_COPY): New mode.
(blockJobImpl): Support new flags.
(cmdBlockCopy): New command.
(cmdBlockJob): Support new job info, new abort flag.
* tools/virsh.pod (blockcopy, blockjob): Document the new command
and flags.
We were forgetting to check errno for overflow.
* tools/virsh.c (get_integer_keycode, vshCommandOptInt)
(vshCommandOptUInt, vshCommandOptUL, vshCommandOptLongLong)
(vshCommandOptULongLong): Rewrite to be safer.
I'm tired of shell-scripting to wait for completion of a block pull,
when virsh can be taught to do the same. I couldn't quite reuse
vshWatchJob, as this is not a case of a long-running command where
a second thread must be used to probe job status (at least, not unless
I make virsh start doing blocking waits for an event to fire), but it
served as inspiration for my simpler single-threaded loop. There is
up to a half-second delay between sending SIGINT and the job being
aborted, but I didn't think it worth the complexity of a second thread
and use of poll() just to minimize that delay.
* tools/virsh.c (cmdBlockPull): Add new options to wait for
completion.
(blockJobImpl): Add argument.
(cmdBlockJob): Adjust caller.
* tools/virsh.pod (blockjob): Document new mode.
Block job cancellation can take a while. Now that upstream qemu 1.1
has asynchronous block cancellation, we want to expose that to the user.
Therefore, the following updates are made to the virDomainBlockJob API:
A new block job event type VIR_DOMAIN_BLOCK_JOB_CANCELED is managed by
libvirt. Regardless of the flags used with virDomainBlockJobAbort, this
event will be raised: 1. when using synchronous block_job_cancel (the
event will be synthesized by libvirt), and 2. whenever it is received
from qemu (via asynchronous block-job-cancel). Note that the event
may be detected by libvirt even before the virDomainBlockJobAbort
completes (always true when it is synthesized, but also possible if
cancellation was fast).
A new extension flag VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC is added to the
virDomainBlockJobAbort API. When enabled, this function will allow
(but not require) asynchronous operation (ie, it returns as soon as
possible, which might be before the job has actually been canceled).
When the API is used in this mode, it is the responsibility of the
caller to wait for a VIR_DOMAIN_BLOCK_JOB_CANCELED event or poll via
the virDomainGetBlockJobInfo API to check the cancellation status.
This patch also exposes the new flag through virsh, and makes virsh
slightly easier to use (--async implies --abort, and lack of any options
implies --info), although it leaves the qemu implementation for later
patches.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch cleans up variables used to store boolean command flags that
are inquired by vshCommandOptBool to use the bool data type instead of
an integer.
Additionally this patch cleans up flag variables that are inferred from
existing flags.
The documentation for the flag doesn't clearly state that the flag only
enhances the output and the user needs to specify other flags to list
inactive domains, that are enhanced by this flag.
Currently, we put no strains on escape sequence possibly leaving users
with console that cannot be terminated. However, not all ASCII
characters can be used as escape sequence. Only those falling in
@ - _ can be; implement and document this constraint.
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Leaks are introduced in commit 1cf0e3d and fe383bb.
Fixing memory leaks, in addition, the patch also fixes a potential missing
return value issue in 'if (from)' statement, without the fixing, although
the programming met a error, the subsequent codes will be executed
continually.
* tools/virsh.c (cmdSnapshotList): fix memory leaks and missing return value.
* How to reproduce?
% virsh snapshot-list <domain> --parent --roots
% virsh snapshot-list <domain> --parent --tree
% virsh snapshot-list <domain> --roots --tree
actual result:
error: --parent and --roots are mutually exclusive
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
error: --parent and --tree are mutually exclusive
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
error: --roots and --tree are mutually exclusive
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
% virsh snapshot-create-as <domain> --name "hello"
% virsh snapshot-create-as <domain> --name "libvirt"
% virsh snapshot-list <domain> --roots --from "hello"
actual result:
error: --roots and --from are mutually exclusive
Name Creation Time State
------------------------------------------------------------
libvirt 2012-03-28 13:46:51 +0800 running
Signed-off-by: Alex Jia <ajia@redhat.com>
Found when attempting to build on Fedora 17 alpha with:
./autogen.sh --system --enable-compile-warnings=error
(this same build command works without problem on Fedora 16). All
other struct initializers for this struct have the extra field filled
in (almost always to 0), so the two errant ones were fixed by adding
in the extra 0 field.
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:
List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$'
Found files were modified with this command:
sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Then checked for nonsense.
The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Right now, it is appallingly easy to cause qemu disk snapshots
to alter a domain then fail; for example, by requesting a two-disk
snapshot where the second disk name resides on read-only storage.
In this failure scenario, libvirt reports failure, but modifies
the live domain XML in-place to record that the first disk snapshot
was taken; and places a difficult burden on the management app
to grab the XML and reparse it to see which disks, if any, were
altered by the partial snapshot.
This patch adds a new flag where implementations can request that
the hypervisor make snapshots atomically; either no changes to
XML occur, or all disks were altered as a group. If you request
the flag, you either get outright failure up front, or you take
advantage of hypervisor abilities to make an atomic snapshot. Of
course, drivers should prefer the atomic means even without the
flag explicitly requested.
There's no way to make snapshots 100% bulletproof - even if the
hypervisor does it perfectly atomic, we could run out of memory
during the followup tasks of updating our in-memory XML, and report
a failure. However, these sorts of catastrophic failures are rare
and unlikely, and it is still nicer to know that either all
snapshots happened or none of them, as that is an easier state to
recover from.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Expose it.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
This introduces a new running reason VIR_DOMAIN_RUNNING_WAKEUP,
and new suspend event type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
While a wakeup event is emitted, the domain which entered into
VIR_DOMAIN_PMSUSPENDED will be transferred to "running"
with reason VIR_DOMAIN_RUNNING_WAKEUP, and a new domain lifecycle
event emitted with type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
This introduces a new domain state pmsuspended to represent
the domain which has been suspended by guest power management,
e.g. (entered itno s3 state). Because a "running" state could
be confused in this case, one will see the guest is paused
actually while playing. And state "paused" is for the domain
which was paused by virDomainSuspend.
Thanks to cgroups, providing user vs. system time of the overall
guest is easy to add to our existing API.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_CPU_STATS_USERTIME)
(VIR_DOMAIN_CPU_STATS_SYSTEMTIME): New constants.
* src/util/virtypedparam.h (virTypedParameterArrayValidate)
(virTypedParameterAssign): Enforce checking the result.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Fix offender.
(qemuDomainGetTotalcpuStats): Implement new parameters.
* tools/virsh.c (cmdCPUStats): Tweak output accordingly.
Since VIR_DOMAIN_AFFECT_{LIVE,CONFIG,CURRENT} was created,
all new virsh commands use "--config" to represents the
persistent changing. This patch add "--config" option
for the old commands which still use "--persistent",
and "--persistent" is now alias of "--config".
tools/virsh.c: (use "--config", and "--persistent" is
alias of "--config" now).
cmdDomIfSetLink, cmdDomIfGetLink, cmdAttachDevice,
cmdDetachDevice, cmdUpdateDevice, cmdAttachInterface,
cmdDetachInterface, cmdAttachDisk, cmdDetachDisk
toos/virsh.pod: Update docs of the changed commands, and
add some missed docs for "--config" (detach-interface,
detach-disk, and detach-device).
The last vestige of the inaccurate 'kilobytes' when we meant 1024 is
now gone. And virsh is now useful for setting memory in units other
than KiB.
* tools/virsh.c (cmdSetmem, cmdSetmaxmem): Use new helper routine,
allow passing bogus arguments on to hypervisor to test driver
sanity checking, and fix leak on parse error.
(vshMemtuneGetSize): New helper.
(cmdMemtune): Use it.
* tools/virsh.pod (setmem, setmaxmem, memtune): Document this.
Now can now do:
virsh vol-resize $vol 10M
virsh blockresize $dom $vol 10M
to get both interfaces to resize to 10MiB. The remaining wart
is that vol-resize defaults to bytes, but blockresize defaults
to KiB, but we can't break existing scripts; oh well, it's no
worse than the same wart of the underlying virDomainBlockResize.
The API for virStorageVolResize states that capacity must always
be positive, and that the presence of shrink and delta flags is
what implies a negative change.
* tools/virsh.c (vshCommandOptScaledInt): New function.
(cmdVolResize): Don't pass negative size.
(cmdVolSize): Rename...
(vshVolSize): ...and use new helper routine.
(cmdBlockResize): Use new helper routine, and support new bytes
flag.
* tools/virsh.pod (NOTES): Document suffixes.
(blockresize, vol-create-as, vol-resize): Point to notes.
Just because our public API has a typo doesn't mean that virsh
has to keep the typo.
* tools/virsh.c (VSH_CMD_FLAG_ALIAS): New flag.
(nodedevCmds): Use it.
(cmdHelp): Omit alias commands.
(cmdNodeDeviceDettach): Rename...
(cmdNodeDeviceDetach): ...to this.
* tools/virsh.pod (nodedev-detach): Document it.
Command line interfaces should use dash, not underscore, as many
keyboard layouts allow that to be typed with fewer shift key presses.
Also, the US spelling of --tunneled gets more google hits than the
UK spelling of --tunnelled.
* tools/virsh.c (opts_migrate): Allow US variant.
(opts_blkdeviotune): Prefer - over _.
* tools/virsh.pod (blkdeviotune): Fix spelling.
In the past, we have created some virsh options with less-than-stellar
names. For back-compat reasons, those names must continue to parse,
but we don't want to document them in help output. This introduces
a new option type, an alias, which points to a canonical option name
later in the option list.
I'm actually quite impressed that our code has already been factored
to do all option parsing through common entry points, such that I
got this added in relatively few lines of code!
* tools/virsh.c (VSH_OT_ALIAS): New option type.
(opts_echo): Hook up an alias, for easy testing.
(vshCmddefOptParse, vshCmddefHelp, vshCmddefGetOption): Allow for
aliases.
* tools/virsh.pod (NOTES): Document promise of back-compat.
* tests/virshtest.c (mymain): Test new feature.
No thanks to 64-bit windows, with 64-bit pid_t, we have to avoid
constructs like 'int pid'. Our API in libvirt-qemu cannot be
changed without breaking ABI; but then again, libvirt-qemu can
only be used on systems that support UNIX sockets, which rules
out Windows (even if qemu could be compiled there) - so for all
points on the call chain that interact with this API decision,
we require a different variable name to make it clear that we
audited the use for safety.
Adding a syntax-check rule only solves half the battle; anywhere
that uses printf on a pid_t still needs to be converted, but that
will be a separate patch.
* cfg.mk (sc_correct_id_types): New syntax check.
* src/libvirt-qemu.c (virDomainQemuAttach): Document why we didn't
use pid_t for pid, and validate for overflow.
* include/libvirt/libvirt-qemu.h (virDomainQemuAttach): Tweak name
for syntax check.
* src/vmware/vmware_conf.c (vmwareExtractPid): Likewise.
* src/driver.h (virDrvDomainQemuAttach): Likewise.
* tools/virsh.c (cmdQemuAttach): Likewise.
* src/remote/qemu_protocol.x (qemu_domain_attach_args): Likewise.
* src/qemu_protocol-structs (qemu_domain_attach_args): Likewise.
* src/util/cgroup.c (virCgroupPidCode, virCgroupKillInternal):
Likewise.
* src/qemu/qemu_command.c(qemuParseProcFileStrings): Likewise.
(qemuParseCommandLinePid): Use pid_t for pid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* src/conf/domain_conf.h (_virDomainObj): Likewise.
* src/probes.d (rpc_socket_new): Likewise.
* src/qemu/qemu_command.h (qemuParseCommandLinePid): Likewise.
* src/qemu/qemu_driver.c (qemudGetProcessInfo, qemuDomainAttach):
Likewise.
* src/qemu/qemu_process.c (qemuProcessAttach): Likewise.
* src/qemu/qemu_process.h (qemuProcessAttach): Likewise.
* src/uml/uml_driver.c (umlGetProcessInfo): Likewise.
* src/util/virnetdev.h (virNetDevSetNamespace): Likewise.
* src/util/virnetdev.c (virNetDevSetNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* src/conf/storage_conf.h (_virStoragePerms): Use mode_t, uid_t,
and gid_t rather than int.
* src/security/security_dac.c (virSecurityDACSetOwnership): Likewise.
* src/conf/storage_conf.c (virStorageDefParsePerms): Avoid
compiler warning.
Now virsh can call virDomainBlockRebase.
* tools/virsh.c (cmdBlockPull): Add --base parameter.
(blockJobImpl): Use it to expose BlockRebase API.
* tools/virsh.pod (blockpull): Document it.
vshFindDisk is to find the disk node in xml doc with given source
path or target of disk device, and type (indicates disk type,
normal disk or changeable disk).
vshPrepareDiskXML is to make changes on the disk node (e.g. create
and insert the new <source> node for inserting media of CDROM drive).
They are marked as unused temporarily.
This patch adds support for the newly introduced
VIR_DOMAIN_CONSOLE_FORCE and VIR_DOMAIN_CONSOLE_SAFE flags. The console
command now has an optional parameter --force that specifies that the
user wants to forcibly interrupt an ongoing console session and create
a new one. Flag --safe requests that the console should be opened only
if the hypervisor driver supports safe console handling.
The behaviour to this point was that the daemon opened two streams to
the console, that competed for data from the pipe, and the result was
that both of the consoles ended up scrambled.
This patch doesn't modify operation of other commands dealing with
console connections (start, create) as those open connections to newly
started domains making it virtually impossible for another client to race
for the console and steal it.
* tools/console.c:
- add support for flag passthrough
* tools/console.h:
- modify function prototypes to match impl.
* tools/virsh.c:
- add flag --force for the console command
If attempting to run
ssh root@somehost virsh console someguest
You'll get an error
2012-02-15 13:11:47.683+0000: 4765: info : libvirt version: 0.9.10, package: 1.fc18 (Unknown, 2012-02-15-11:48:57, lettuce.camlab.fab.redhat.com)
2012-02-15 13:11:47.683+0000: 4765: error : vshRunConsole:320 : unable to get tty attributes: Invalid argument
Connected to domain f16x86_64
Escape character is ^]
There are several problems here
- The actual error message is bad for users
- We shouldn't rely on VIR_ERROR for this case
- The prompt makes it look like we still connected
because we didn't flush stdout.
* virsh.c: Flush stdout before starting console and check
for a valid tty
This patch adds new options to the "virsh list" command enabling
filtering of persistent and transient domains along with the option to
print only UUIDs or names of domains instead of printing the table.
Option --name prints domain names (one per line) instead of the default
table. Similarly --uuid prints domain's UUID. The option --table is
an alias for the default behavior.
Aditionally --persistent and/or --transient may be specified to filter
the output of domains.
Any device XML doesn't use the same order as libvirt generates, or
uses decimal for attributes like "slot" of "<address>" will cause
device detaching to fail, as virsh compares the XML simply earlier
in strict manner before internal parsing.
This is regression introduced by ea7182c.
Commit fad5cd2108 introduces a new flag
that allows to show domain's title with domains. This commit introduced
resource leak while listing inactive domains with titles.
Detected by valgrind. the codes are allocating 0 bytes memory to variable
cpumap by vshCalloc function, and then the function VIR_USE_CPU will access
it later, a invalid read error will be hit.
* tools/virsh.c(cmdVcpuPin): fix invalid read error.
* How to reproduce?
% valgrind -v --read-var-info=yes virsh vcpupin <domain> 0 0
* Actual result:
==27271== ERROR SUMMARY: 5 errors from 2 contexts (suppressed: 8 from 6)
==27271==
==27271== 1 errors in context 1 of 2:
==27271== Invalid read of size 1
==27271== at 0x39CF087E2E: __GI_memcpy (in /lib64/libc-2.12.so)
==27271== by 0x39CF114FDC: xdrmem_putbytes (in /lib64/libc-2.12.so)
==27271== by 0x39CF114707: xdr_opaque (in /lib64/libc-2.12.so)
==27271== by 0x4D56194: xdr_remote_domain_pin_vcpu_args (remote_protocol.c:1844)
==27271== by 0x4D6CCE1: virNetMessageEncodePayload (virnetmessage.c:341)
==27271== by 0x4D5A44B: virNetClientProgramCall (virnetclientprogram.c:327)
==27271== by 0x4D36EDB: callWithFD (remote_driver.c:4546)
==27271== by 0x4D36F7B: call (remote_driver.c:4567)
==27271== by 0x4D3B2C1: remoteDomainPinVcpu (remote_client_bodies.h:1566)
==27271== by 0x4D199D3: virDomainPinVcpu (libvirt.c:8585)
==27271== by 0x4241F4: cmdVcpuPin (virsh.c:5262)
==27271== by 0x4150A6: vshCommandRun (virsh.c:17712)
==27271== Address 0x5602b80 is 0 bytes after a block of size 0 alloc'd
==27271== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==27271== by 0x4C89BDF: virAllocN (memory.c:129)
==27271== by 0x423868: _vshCalloc.clone.2 (virsh.c:454)
==27271== by 0x423EF9: cmdVcpuPin (virsh.c:5190)
==27271== by 0x4150A6: vshCommandRun (virsh.c:17712)
==27271== by 0x426583: main (virsh.c:19289)
==27271==
==27271==
==27271== 4 errors in context 2 of 2:
==27271== Invalid read of size 1
==27271== at 0x424133: cmdVcpuPin (virsh.c:5245)
==27271== by 0x4150A6: vshCommandRun (virsh.c:17712)
==27271== by 0x426583: main (virsh.c:19289)
==27271== Address 0x5602b80 is 0 bytes after a block of size 0 alloc'd
==27271== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==27271== by 0x4C89BDF: virAllocN (memory.c:129)
==27271== by 0x423868: _vshCalloc.clone.2 (virsh.c:454)
==27271== by 0x423EF9: cmdVcpuPin (virsh.c:5190)
==27271== by 0x4150A6: vshCommandRun (virsh.c:17712)
==27271== by 0x426583: main (virsh.c:19289)
Signed-off-by: Alex Jia <ajia@redhat.com>
Our HACKING discourages use of malloc and free, for at least
a couple of years now. But we weren't enforcing it, until now :)
For now, I've exempted python and tests, and will clean those up
in subsequent patches. Examples should be permanently exempt,
since anyone copying our examples won't have use of our
internal-only memory.h via libvirt_util.la.
* cfg.mk (sc_prohibit_raw_allocation): New rule.
(exclude_file_name_regexp--sc_prohibit_raw_allocation): and
exemptions.
* src/cpu/cpu.c (cpuDataFree): Avoid false positive.
* src/conf/network_conf.c (virNetworkDNSSrvDefParseXML): Fix
offenders.
* src/libxl/libxl_conf.c (libxlMakeDomBuildInfo, libxlMakeVfb)
(libxlMakeDeviceModelInfo): Likewise.
* src/rpc/virnetmessage.c (virNetMessageSaveError): Likewise.
* tools/virsh.c (_vshMalloc, _vshCalloc): Likewise.
Detected by valgrind. Leak is introduced in commit 3bb6bcf.
Free 'vol' memory before allocating memory, the codes will miss one time
free when 'vol_i = nvolumes' in for loop, so plug memory leak.
* tools/virsh.c: fix memory leak on cmdUndefine.
* How to reproduce?
% dd if=/dev/null of=/var/lib/libvirt/images/foo bs=1 count=1 seek=10M
% virsh define foo.xml (disk source file points to '/var/lib/libvirt/images/foo')
% virsh vol-clone foo foo-clone default (the original guest name is 'foo')
% virsh pool-refresh default
% virsh vol-list default (make sure 'foo-clone' volume exists)
% virsh define foo-clone.xml (disk source file points to '/var/lib/libvirt/images/foo-clone')
% valgrind -v --leak-check=full virsh undefine foo-clone --remove-all-storage
* Actual results:
1. virsh output
Domain foo-clone has been undefined
Volume '/var/lib/libvirt/images/foo-clone' removed.
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
2. valgrind result
==6515== 92 (40 direct, 52 indirect) bytes in 1 blocks are definitely lost in loss record 46 of 69
==6515== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==6515== by 0x4C89B71: virAlloc (memory.c:101)
==6515== by 0x4CFCACE: virGetStorageVol (datatypes.c:724)
==6515== by 0x4D4A8E0: remoteStorageVolLookupByPath (remote_driver.c:4664)
==6515== by 0x4D07153: virStorageVolLookupByPath (libvirt.c:12508)
==6515== by 0x4270E6: cmdUndefine (virsh.c:2828)
==6515== by 0x4151B6: vshCommandRun (virsh.c:17693)
==6515== by 0x4264D3: main (virsh.c:19270)
==6515==
==6515== LEAK SUMMARY:
==6515== definitely lost: 40 bytes in 1 blocks
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=786674
Signed-off-by: Alex Jia <ajia@redhat.com>
This patch adds a new command "desc" to show and modify titles and
description for the domains using the new API.
This patch also adds a new flag for the "list" command to show titles in
the domain list, to allow easy identification of VMs by storing a short
description.
Example:
virsh # list --title
Id Name State Title
-----------------------------------------------
0 Domain-0 running Mailserver 1
2 fedora paused
Add a new function to allow changing of capacity of storage volumes.
Plan out several flags, even if not all of them will be implemented
up front.
Expose the new command via 'virsh vol-resize'.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, we support only filling a volume with zeroes on wiping.
However, it is not enough as data might still be readable by
experienced and equipped attacker. Many technical papers have been
written, therefore we should support other wiping algorithms.
Extend the 'shutdown' and 'reboot' methods so that they both
accept a new argument
--mode acpi|agent
* tools/virsh.c: New args for shutdown/reboot
* tools/virsh.pod: Document new args
Other virsh domifXXX commands can accept target name
as a parameter to specify interface. From viewpoint of
consistency, virsh domif-getlink command should accept
target name as a parameter. This patch achieves this.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Although this is a public API break, it only affects users that
were compiling against *_LAST values, and can be trivially
worked around without impacting compilation against older
headers, by the user defining VIR_ENUM_SENTINELS before using
libvirt.h. It is not an ABI break, since enum values do not
appear as .so entry points. Meanwhile, it prevents users from
using non-stable enum values without explicitly acknowledging
the risk of doing so.
See this list discussion:
https://www.redhat.com/archives/libvir-list/2012-January/msg00804.html
* include/libvirt/libvirt.h.in: Hide all sentinels behind
LIBVIRT_ENUM_SENTINELS, and add missing sentinels.
* src/internal.h (VIR_DEPRECATED): Allow inclusion after
libvirt.h.
(LIBVIRT_ENUM_SENTINELS): Expose sentinels internally.
* daemon/libvirtd.h: Use the sentinels.
* src/remote/remote_protocol.x (includes): Don't expose sentinels.
* python/generator.py (enum): Likewise.
* tests/cputest.c (cpuTestCompResStr): Silence compiler warning.
* tools/virsh.c (vshDomainStateReasonToString)
(vshDomainControlStateToString): Likewise.
Preparation for another patch that refactors common patterns
into the new file for fewer lines of code overall.
* src/util/util.h (virTypedParameterArrayClear): Move...
* src/util/virtypedparam.h: ...to new file.
(virTypedParameterArrayValidate, virTypedParameterAssign): New
prototypes.
* src/util/util.c (virTypedParameterArrayClear): Likewise.
* src/util/virtypedparam.c: New file.
* po/POTFILES.in: Mark file for translation.
* src/Makefile.am (UTIL_SOURCES): Build it.
* src/libvirt_private.syms (util.h): Split...
(virtypedparam.h): to new section.
(virkeycode.h): Sort.
* daemon/remote.c: Adjust callers.
* tools/virsh.c: Likewise.
When using "virsh domifstat" command or "virsh domiftune" command,
we pass an interface name as a parameter, so interface name is
important.
"virsh domiflist" output should display interface names
on the first row.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Disk "type" and "device" are generally interesting stuff the
user may want to known, too. To not break any scripts which
parsed the output field, a new option "--details" is introduced
to output the two introduced fields.
Domain IDs are at least 16 bits for most hypervisors, theoretically
event 32-bits. 3 characters is clearly too small an alignment.
Increase alignment to 5 characters to allow 16-bit domain IDs to
display cleanly. Commonly seen with LXC where domain IDs are the
process IDs by default. Also increase the 'name' field from 20
to 30 characters to cope with longer guest names which are quite
common
Just like command "domblklist", the command extracts "type",
"source", "target", "model", and "MAC" of all virtual interfaces
from domain XML (live or persistent).
When running virsh migrate with --xml option and actual xml file doesn't
exist, virsh hasn't output any error information, although return value
is 1.
* tools/virsh.c: Raising a appropriate error information when operation fails.
* How to reproduce?
% virsh migrate <domain> --live qemu+ssh://<target host>/system --xml non-existent.xml
% echo $?
* Fixed result:
error: file 'non-existent.xml' doesn't exist
Signed-off-by: Alex Jia <ajia@redhat.com>
When disk snapshots were first implemented, libvirt blindly refused
to allow an external snapshot destination that already exists, since
qemu will blindly overwrite the contents of that file during the
snapshot_blkdev monitor command, and we don't like a default of
data loss by default. But VDSM has a scenario where NFS permissions
are intentionally set so that the destination file can only be
created by the management machine, and not the machine where the
guest is running, so that libvirt will necessarily see the destination
file already existing; adding a flag will allow VDSM to force the file
reuse without libvirt complaining of possible data loss.
https://bugzilla.redhat.com/show_bug.cgi?id=767104
* include/libvirt/libvirt.h.in (virDomainSnapshotCreateFlags): Add
VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it. Add
note about partial failure.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Add new
flag.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotCreateXML): Implement the new flag.
virshReportError() function frees the most recent error reported from
libvirt. Condition that checks if connection to the daemon was broken
during last command was then limited to check for SIGPIPE signal not
taking into account possible errors signalized without SIGPIPE.
This patch moves the check before the error is freed, to take into
account code that does not emit SIGPIPE while failing.
* tools/virsh.c: - move check for broken connection before error print.
Add a new command domiftune to get/set interface parameters.
* tools/virsh.c: implement the new command
* tools/virsh.pod: documentation of the new command
Trivial patch, move version command to host commands group.
It has no any related with any domain.
It may connect to the daemon, so the flag is 0 but not VSH_CMD_FLAG_NOCONNECT.
called vshWatchJob. This can be later used in other
job oriented commands like dump, save, managedsave
to report progress and allow user to cancel via ^C.
Detected by valgrind. Leaks introduced in commit 4d5383f.
* tools/virsh.c: fix memory leaks on cmdDomXMLFromNative and cmdDomXMLToNative.
* how to reproduce?
% virsh dumpxml ${guest} > foo.xml
% valgrind -v --leak-check=full virsh domxml-from-native qemu-argv foo.xml
% valgrind -v --leak-check=full virsh domxml-to-native qemu-argv foo.xml
* actual valgrind results:
==9724== 8,193 bytes in 1 blocks are definitely lost in loss record 31 of 33
==9724== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==9724== by 0x4A06167: realloc (vg_replace_malloc.c:525)
==9724== by 0x4C7510B: virReallocN (memory.c:161)
==9724== by 0x4C84679: virFileReadLimFD (util.c:394)
==9724== by 0x4C84815: virFileReadAll (util.c:455)
==9724== by 0x41A89F: cmdDomXMLFromNative (virsh.c:5532)
==9724== by 0x414872: vshCommandRun (virsh.c:16464)
==9724== by 0x425623: main (virsh.c:17971)
==9724==
==9724== LEAK SUMMARY:
==9724== definitely lost: 8,193 bytes in 1 blocks
==9724== indirectly lost: 0 bytes in 0 blocks
==9724== possibly lost: 0 bytes in 0 blocks
==9724== still reachable: 127,128 bytes in 1,347 blocks
==7409== 8,193 bytes in 1 blocks are definitely lost in loss record 31 of 33
==7409== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==7409== by 0x4A06167: realloc (vg_replace_malloc.c:525)
==7409== by 0x4C7510B: virReallocN (memory.c:161)
==7409== by 0x4C84679: virFileReadLimFD (util.c:394)
==7409== by 0x4C84815: virFileReadAll (util.c:455)
==7409== by 0x41A7AF: cmdDomXMLToNative (virsh.c:5578)
==7409== by 0x414892: vshCommandRun (virsh.c:16463)
==7409== by 0x425633: main (virsh.c:17970)
==7409==
==7409== LEAK SUMMARY:
==7409== definitely lost: 8,193 bytes in 1 blocks
==7409== indirectly lost: 0 bytes in 0 blocks
==7409== possibly lost: 0 bytes in 0 blocks
==7409== still reachable: 127,128 bytes in 1,347 blocks
Signed-off-by: Alex Jia <ajia@redhat.com>
No need to repeat code for formatting typed parameters.
* tools/virsh.c (vshGetTypedParamValue): Support strings, and exit
on OOM.
(cmdSchedinfo, cmdBlkiotune, cmdMemtune, cmdBlkdeviotune): Use
it for less code.
Add an option for virsh undefine command, to remove associated storage
volumes while undefining a domain. This patch allows the user to remove
associated (libvirt managed ) storage volumes while undefining a domain.
The new option --storage for the undefine command takes a string
argument that consists of comma separated list of target or source path
of volumes to be undefined. Volumes are removed after the domain has
been successfully undefined,
If a volume is not part of a storage pool, the user is warned to remove
the volume in question himself.
Option --wipe-storage may be specified along with this, that ensures
the image is wiped before removing.
Option --remove-all-storage enables the user to remove all storage. The
name is chosen long as the users should be aware what they're about to
do.
If parsing of arguments failed, virsh did silently exit returning and
error state, but not specifying the possible problem.
* tools/virsh: cmdNodesuspend: - error handling added
Detected by valgrind. Leak introduced in commit 88a993b:
* tools/virsh.c: fix memory leak on cmdDomblklist.
* how to reproduce?
% valgrind -v --leak-check=full virsh domblklist <domain name>
* actual valgrind result:
==6573== 1,836 bytes in 1 blocks are definitely lost in loss record 110 of 124
==6573== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==6573== by 0x330D71497D: xdr_string (in /lib64/libc-2.12.so)
==6573== by 0x4D26CED: xdr_remote_nonnull_string (remote_protocol.c:30)
==6573== by 0x4D28138: xdr_remote_domain_get_xml_desc_ret (remote_protocol.c:1418)
==6573== by 0x4D3C0C2: virNetMessageDecodePayload (virnetmessage.c:382)
==6573== by 0x4D3279F: virNetClientProgramCall (virnetclientprogram.c:382)
==6573== by 0x4D0D50B: callWithFD (remote_driver.c:4339)
==6573== by 0x4D0D5AB: call (remote_driver.c:4360)
==6573== by 0x4D16EAF: remoteDomainGetXMLDesc (remote_client_bodies.h:861)
==6573== by 0x4CF9F4F: virDomainGetXMLDesc (libvirt.c:4098)
==6573== by 0x4154D9: cmdDomblklist (virsh.c:1722)
==6573== by 0x4149E2: vshCommandRun (virsh.c:16365)
==6573==
==6573== 46,009 (352 direct, 45,657 indirect) bytes in 1 blocks are definitely lost in loss record 123 of 124
==6573== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==6573== by 0x3318286DC6: xmlXPathNewContext (in /usr/lib64/libxml2.so.2.7.6)
==6573== by 0x4C79AE2: virXMLParseHelper (xml.c:779)
==6573== by 0x415512: cmdDomblklist (virsh.c:1726)
==6573== by 0x4149E2: vshCommandRun (virsh.c:16365)
==6573== by 0x427743: main (virsh.c:17867)
==6573==
==6573== LEAK SUMMARY:
==6573== definitely lost: 2,188 bytes in 2 blocks
==6573== indirectly lost: 45,657 bytes in 332 blocks
==6573== possibly lost: 0 bytes in 0 blocks
==6573== still reachable: 128,034 bytes in 1,364 blocks
==6573== suppressed: 0 bytes in 0 blocks
Signed-off-by: Alex Jia <ajia@redhat.com>
Reported by Alex Jia <ajia@redhat.com>. Function cmdDomIfGetLink did not
set a success return value on success path.
Signed-off-by: Alex Jia<ajia@redhat.com>
Detected by valgrind. Leak introduced in commit dc675f3:
* tools/virsh.c: fix memory leak on cmdDomIfGetLink.
* how to reproduce?
% valgrind -v --leak-check=full virsh domif-getlink <domain name> 0
* actual valgrind result:
==13102== 18 bytes in 1 blocks are definitely lost in loss record 9 of 47
==13102== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==13102== by 0x322A6A67DD: xmlStrndup (in /usr/lib64/libxml2.so.2.7.6)
==13102== by 0x414892: cmdDomIfGetLink (virsh.c:1538)
==13102== by 0x4136A2: vshCommandRun (virsh.c:16363)
==13102== by 0x4253FB: main (virsh.c:17865)
==13102==
==13102== LEAK SUMMARY:
==13102== definitely lost: 18 bytes in 1 blocks
==13102== indirectly lost: 0 bytes in 0 blocks
==13102== possibly lost: 0 bytes in 0 blocks
==13102== still reachable: 127,888 bytes in 1,361 blocks
==13102== suppressed: 0 bytes in 0 blocks
Signed-off-by: Alex Jia <ajia@redhat.com>
Detected by valgrind. Leak introduced in commit e9bd9a0:
* tools/virsh.c: fix memory leak on cmdBlkdeviotune.
* how to reproduce?
% valgrind -v --leak-check=full virsh blkdeviotune <domain name> <block device>
* actual valgrind result:
==12759== 576 bytes in 1 blocks are definitely lost in loss record 18 of 29
==12759== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==12759== by 0x42134E: _vshCalloc.clone.2 (virsh.c:422)
==12759== by 0x4217CB: cmdBlkdeviotune (virsh.c:6364)
==12759== by 0x4136A2: vshCommandRun (virsh.c:16363)
==12759== by 0x4253FB: main (virsh.c:17865)
==12759==
==12759== LEAK SUMMARY:
==12759== definitely lost: 576 bytes in 1 blocks
==12759== indirectly lost: 0 bytes in 0 blocks
==12759== possibly lost: 0 bytes in 0 blocks
==12759== still reachable: 126,964 bytes in 1,342 blocks
==12759== suppressed: 0 bytes in 0 blocks
Signed-off-by: Alex Jia <ajia@redhat.com>
On RHEL 5, with libxml2-2.6.26, the build failed with:
virsh.c: In function 'vshNodeIsSuperset':
virsh.c:11951: warning: implicit declaration of function 'xmlChildElementCount'
(or if warnings aren't errors, a link failure later on).
* src/util/xml.h (virXMLChildElementCount): New prototype.
* src/util/xml.c (virXMLChildElementCount): New function.
* src/libvirt_private.syms (xml.h): Export it.
* tools/virsh.c (vshNodeIsSuperset): Use it.
https://bugzilla.redhat.com/show_bug.cgi?id=648855 mentioned a
misuse of 'an' where 'a' is proper; that has since been fixed,
but a search found other problems (some were a spelling error for
'and', while most were fixed by 'a').
* daemon/stream.c: Fix grammar.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_event.c: Likewise.
* src/esx/esx_driver.c: Likewise.
* src/esx/esx_vi.c: Likewise.
* src/rpc/virnetclient.c: Likewise.
* src/rpc/virnetserverprogram.c: Likewise.
* src/storage/storage_backend_fs.c: Likewise.
* src/util/conf.c: Likewise.
* src/util/dnsmasq.c: Likewise.
* src/util/iptables.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* src/xen/xs_internal.c: Likewise.
* tools/virsh.c: Likewise.
Currently virsh supports only ^] as escape character for console.
However, some users might want to use something else. This patch
creates such ability by specifying '-e' switch on virsh command
line.
Not only was ctl->quit accessed without a mutex but unfortunately,
virEventAddTimeout only interrupts the poll when event loop is running
so the hack needs to add a timeout that will make next poll return
immediately without blocking.
Support virsh command blkdeviotune. Can set or query a block disk
I/O throttle setting.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This adds per-device weights to <blkiotune>. Note that the
cgroups implementation only supports weights per block device,
and not per-file within the device; hence this option must be
global to the domain definition rather than tied to individual
<devices>/<disk> entries:
<domain ...>
<blkiotune>
<device>
<path>/path/to/block</path>
<weight>1000</weight>
</device>
</blkiotune>
..
This patch also adds a parameter --device-weights to virsh command
blkiotune for setting/getting blkiotune.weight_device for any
hypervisor that supports it. All <device> entries under
<blkiotune> are concatenated into a single string attribute under
virDomain{Get,Set}BlkioParameters, named "device_weight".
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If both nodes do not have any children, we pass zero to
virBitmapAlloc which returns NULL. In turn we report OOM error
and return false (meaning nodes are different). This is not true.
Up to now users have to give a full XML description on input when
device-detaching. If they omitted something it lead to unclear
error messages (like generated MAC wasn't found, etc.).
With this patch users can specify only those information which
specify one device sufficiently precise. Remaining information is
completed from domain.
One of the top questions by libvirt users is how to create a host
bridge device so that guests can be directly on the physical
network. There are several example documents that explain how to do
this manually, but following them often results in confusion and
failure. virt-manager does a good job of creating a bridge based on an
existing network device, but not everyone wants to use virt-manager.
This patch adds a new command, iface-bridge that makes it just about
as simple as possible to create a new bridge device based on an
existing ethernet/vlan/bond device (including associating IP
configuration with the bridge rather than the now-attached device),
and start that new bridge up ready for action, eg:
virsh iface-bridge eth0 br0
For symmetry's sake, it also adds a command to remove a device from a
bridge, restoring the IP config to the now-unattached device:
virsh iface-unbridge br0
(I had a short debate about whether to do "iface-unbridge eth0"
instead, but that would involve searching through all bridge devices
for the one that contained eth0, which seems like a bit too much
trouble).
NOTE: These two commands require that the netcf library be available
on the host. Hopefully this will provide some extra incentive for
people using suse, debian, ubuntu, and other similar systems to polish
up (and push downstream) the ports to those distros recently pushed to
the upstream netcf repo by Dan Berrange. Anyone interested in helping
with that effort in any way should join the netcf-devel mailing list
(subscription info at
https://fedorahosted.org/mailman/listinfo/netcf-devel)
During creation of the bridge, it's possible to specify whether or not
the STP protocol should be started up on the bridge and, if so, how
many seconds the bridge should squelch traffic from newly added
devices while learning new topology (defaults are stp='on' and
delay='0', which seems to usually work best for bridges used in the
context of libvirt guests).
There is also an option to not immediately start the bridge (and a
similar option to not immediately start the un-attached device after
destroying the bridge. Default is to start the new device, because in
the case of iface-unbridge not starting is strongly discouraged as it
will leave the system with no network connectivity on that interface
(because it's necessary to destroy/undefine the bridge device before
the unattached device can be defined), and it seemed better to make
the option for iface-bridge behave consistently.
NOTE TO THOSE TRYING THESE COMMANDS FOR THE FIRST TIME: to guard
against any "unexpected" change to configuration, it is advisable to
issue an "virsh iface-begin" command before starting any interface
config changes, and "virsh iface-commit" only after you've verified
that everything is working as you expect. If something goes wrong,
you can always run "virsh iface-rollback" or reboot the system (which
should automatically do iface-rollback).
Aside from adding the code for these two functions, and the two
entries into the command table, the only other change to virsh.c was
to add the option name to vshCommandOptInterfaceBy(), because the
iface-unbridge command names its interface option as "bridge".
virsh.pod has also been updated with short descriptions of these two
new commands.
The src/util/network.c file is a dumping ground for many different
APIs. Split it up into 5 pieces, along functional lines
- src/util/virnetdevbandwidth.c: virNetDevBandwidth type & helper APIs
- src/util/virnetdevvportprofile.c: virNetDevVPortProfile type & helper APIs
- src/util/virsocketaddr.c: virSocketAddr and APIs
- src/conf/netdev_bandwidth_conf.c: XML parsing / formatting
for virNetDevBandwidth
- src/conf/netdev_vport_profile_conf.c: XML parsing / formatting
for virNetDevVPortProfile
* src/util/network.c, src/util/network.h: Split into 5 pieces
* src/conf/netdev_bandwidth_conf.c, src/conf/netdev_bandwidth_conf.h,
src/conf/netdev_vport_profile_conf.c, src/conf/netdev_vport_profile_conf.h,
src/util/virnetdevbandwidth.c, src/util/virnetdevbandwidth.h,
src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h,
src/util/virsocketaddr.c, src/util/virsocketaddr.h: New pieces
* daemon/libvirtd.h, daemon/remote.c, src/conf/domain_conf.c,
src/conf/domain_conf.h, src/conf/network_conf.c,
src/conf/network_conf.h, src/conf/nwfilter_conf.h,
src/esx/esx_util.h, src/network/bridge_driver.c,
src/qemu/qemu_conf.c, src/rpc/virnetsocket.c,
src/rpc/virnetsocket.h, src/util/dnsmasq.h, src/util/interface.h,
src/util/iptables.h, src/util/macvtap.c, src/util/macvtap.h,
src/util/virnetdev.h, src/util/virnetdevtap.c,
tools/virsh.c: Update include files
As the description of removing CDROM media from
http://wiki.libvirt.org/page/QEMUSwitchToLibvirt#eject_DEV
Add flag 'VSH_OFLAG_EMPTY_OK' to the option 'source' of attach-disk
Then avoid outputting <source> in the XML if 'source' was empty,
rather than trusting libvirt domain_conf.c to understand an empty
string.
Signed-off-by: Xu He Jie <xuhj@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If vol-create-from is failed due to 'input volume not found',
virsh outputs like this:
$ sudo virsh vol-create-from testpool test-vol.xml test.img
error: failed to get vol 'test.img', specifying --pool might help
error: Storage volume not found: no storage vol with matching path
However, '--pool' is incorrect because it is already specified as
second argument ('testpool' in this case). It should be "--inputpool".
The patch fixes this by using pooloptname, which will be "inputpool"
in this case and "pool" in other cases, as error message.
We have a new vol type "dir" in addition to "file" and "block", but
virsh doesn't know it. Fix it.
Additionally, the patch lets virsh output "unknown" if not matched
any of them.
Rather than having to do:
$ virsh snapshot-revert dom $(virsh snapshot-current dom --name)
I thought it would be nice to do:
$ virsh snapshot-revert dom --current
I didn't add 'virsh snapshot-dumpxml --current' since we already have
'virsh snapshot-current' for the same task. snapshot-list accepted
a name but did not require it, and that remains the case, with
--current serving in place of that name. For all other commands,
name used to be required, and can now be replaced by --current;
I intentionally made it so that omitting both --current and a name
is an error (having the absence of a name imply --current seems
just a bit too magic, so --current must be explicit). I also had
to keep snapshot-edit backwards-compatible, as the only command
that already had a --current argument alongside a name, which still
works to both edit a named snapshot and make it current.
* tools/virsh.c (vshLookupSnapshot): New helper function.
(cmdSnapshotEdit, cmdSnapshotList, cmdSnapshotParent)
(cmdSnapshotDelete, cmdDomainSnapshotRevert): Use it, adding an
option where needed.
* tools/virsh.pod (snapshot-delete, snapshot-edit)
(snapshot-list, snapshot-parent, snapshot-revert): Document
use of --current.
(snapshot-dumpxml): Mention alternative.
Given a list of snapshots and their parents, finding all descendants
requires a hairy traversal. This code is O(n^3); it could maybe be
made to scale O(n^2) with the use of a hash table, but that costs more
memory. Hopefully there aren't too many people with a hierarchy
so large as to approach REMOTE_DOMAIN_SNAPSHOT_LIST_NAMES_MAX (1024).
* tools/virsh.c (cmdSnapshotList): Add final fallback.
Iterating over one level of children requires parsing all snapshots
and their parents; a bit of code shuffling makes it pretty easy
to do this as well.
* tools/virsh.c (cmdSnapshotList): Add another fallback.
Emulating --from requires grabbing the entire list of snapshots
and their parents, and recursively iterating over the list from
the point of interest - but we already do that for --tree. This
turns on emulation for that situation.
* tools/virsh.c (__vshControl): Rename member.
(vshReconnect, cmdConnect, vshGetSnapshotParent): Update clients.
(cmdSnapshotList): Add fallback.
Sometimes, we only care about one branch of the snapshot hierarchy.
Make it easier to list a single branch, by using the new APIs.
Technically, I could emulate these new virsh options on old servers
by doing a complete dump, then scraping xml to filter out just the
snapshots that I care about, but I didn't want to do that in this patch.
* tools/virsh.c (cmdSnapshotList): Add --from, --descendants.
* tools/virsh.pod (snapshot-list): Document them.
I was a bit surprised that 'virsh snapshot-edit dom name' silently
allowed me to clone things, while still telling me the old name,
especially since other commands like 'virsh edit dom' reject rename
attempts (*). This fixes things to be more explicit (**).
(*) Technically, 'virsh edit dom' relies on virDomainDefineXML
behavior, which rejects attempts to mix a new name with existing
uuid or new uuid with existing name, but you can create a new
domain by changing both uuid and name. On the other hand, while
snapshot-edit --clone is a true clone, creating a new domain
would also have to decide whether to clone snapshot metadata,
managed save, and any other secondary data related to the domain.
Domain renames are not trivial either.
(**) Renaming or creating a clone is still a risky proposition -
for offline snapshots and system checkpoints, if the new name
does not match an actual name recorded in the qcow2 internal
snapshots, then you cannot revert to the new checkpoint. But it
is assumed that anyone using the new virsh flags knows what they
are doing, and can deal with the fallout caused by a rename/clone;
that is, we can't completely prevent a user from shooting
themselves in the foot, so much as we are making the default
action less risky.
* tools/virsh.c (cmdSnapshotEdit): Add --rename, --clone.
* tools/virsh.pod (snapshot-edit): Document them.
virsh undefine command can now undefine an active guest, but the help information is still the old.
This patch modifies it and make it coincident to the manpage of virsh.
Signed-off-by: tangchen <tangchen@cn.fujitsu.com>
It was impossible for 'virsh snapshot-current dom name' to set name
as the current snapshot, if name is a disk-only snapshot.
Using strstr rather than full-blown xml parsing is safe, since the
xml is assumed to be well-formed coming from libvirtd rather than
arbitrary text coming from the user.
* tools/virsh.c (cmdSnapshotCurrent, cmdSnapshotEdit): Pass
disk_only flag when redefining a disk snapshot.
Although reverting to a snapshot is a form of data loss, this is
normally expected. However, there are two cases where additional
surprises (failure to run the reverted state, or a break in
connectivity to the domain) can come into play. Requiring extra
acknowledgment in these cases will make it less likely that
someone can get into an unrecoverable state due to a default revert.
Also create a new error code, so users can distinguish when forcing
would make a difference, rather than having to blindly request force.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_SNAPSHOT_REVERT_FORCE):
New flag.
* src/libvirt.c (virDomainRevertToSnapshot): Document it.
* include/libvirt/virterror.h (VIR_ERR_SNAPSHOT_REVERT_RISKY): New
error value.
* src/util/virterror.c (virErrorMsg): Implement it.
* tools/virsh.c (cmdDomainSnapshotRevert): Add --force to virsh.
* tools/virsh.pod (snapshot-revert): Document it.
Previously, virsh 'snapshot-parent' and 'snapshot-current' were
completely silent in the case where the code conclusively proved
there was no parent or current snapshot, but differed in exit
status; this silence caused some confusion on whether the commands
worked. Furthermore, commit d1be48f introduced a regression where
snapshot-parent would leak output about an unknown function, but
only on the first attempt, when talking to an older server that
lacks virDomainSnapshotGetParent. This changes things to consistenly
report an error message and exit with status 1 when no snapshot
exists, and to avoid leaking unknown function warnings when using
fallbacks.
* tools/virsh.c (vshGetSnapshotParent): Alter signature, to
distinguish between real error and missing parent. Don't pollute
last_error on success.
(cmdSnapshotParent): Adjust caller. Always output message on
failure.
(cmdSnapshotList): Adjust caller.
(cmdSnapshotCurrent): Always output message on failure.
error:could not take a screenshot of xp
==6216== Syscall param unlink(pathname) points to unaddressable byte(s)
==6216== at 0x373A0D4937: unlink (syscall-template.S:82)
==6216== by 0x40FD73: cmdScreenshot (virsh.c:3070)
==6216== by 0x42BA0D: vshCommandRun (virsh.c:14920)
==6216== by 0x42EC97: main (virsh.c:16379)
==6216== Address 0x0 is not stack'd, malloc'd or (recently) free'd
==6216==
error:Requested operation is not valid: domain is not running
Reuse the tree listing of nodedev-list, coupled with the new helper
function to efficiently grab snapshot parent names, to produce
tree output for a snapshot hierarchy. For example:
$ virsh snapshot-list dom --tree
root1
|
+- sibling1
+- sibling2
| |
| +- grandchild
|
+- sibling3
root2
|
+- child
* tools/virsh.c (cmdSnapshotList): Add --tree.
* tools/virsh.pod (snapshot-list): Document it.
Make parent computation reusable, using virDomainSnapshotGetParent
when possible.
* tools/virsh.c (vshGetSnapshotParent): New helper.
(cmdSnapshotParent): Use it.
This patch cleans the cpu baseline function using new libvirt helper
functions and fixes XPath expression that selects <cpu> elements from
the source file, that can contain concatenated <capabilities> XMLs,
domain XMLs and bare <cpu> elements. The fixed XPath expression ensures
not to select NUMA <cpu id=... elements.
This patch also removes vshRealloc function, that remained unused after
cleaning up cpu-baseline.
https://bugzilla.redhat.com/show_bug.cgi?id=731645
Prior to commit 85d2810, we had an issue where:
snapshot-create-as dom name --diskspec spec --diskspec spec
failed to parse the second spec, because the first spec had marked
that option as no longer requiring an argument.
In commit 85d2810, I fixed it by making argv options no longer mark
the option as seen. But this in turn breaks mandatory argv options,
which now complain that the argv option is missing.
This patch reverts that part of 85d2810, and instead replaces it with
fixes to no longer clear opts_need_arg of an argv argument.
* tools/virsh.c (vshCmddefGetOption, vshCmddefGetData)
(vshCommandParse): Fix option parsing for required argv option.
(vshCmddefOptParse): Check that argv option is last.
* tests/virsh-optparse: Enhance test.
There are 3 ways to lookup a volume, only virStorageVolLookupByName
needs pool object. So if no --pool is specified, it will tries to
get the volume via virStorageVolLookupByPath/virStorageVolLookupByKey.
But if all 3 ways fails, and no --pool is specified, a friendly
error might help the user get right way quickly.
Translators are likely to botch trailing spacing; by doing the
formatting outside of the translation, we can generally get
better alignment. Also, for consistency, use 'bytes read' to
match 'bytes written'.
* tools/virsh.c (domblkstat_output): Drop trailing space. Tweak
rd_bytes output.
(cmdDomblkstat, DOMBLKSTAT_LEGACY_PRINT): Update formatting.
Users of virsh complain that output of the domblkstat command
is not intuitive enough. This patch adds explanation of fields
returned by this command to the help section for domblkstat and
the man page of virsh. Also a switch --human is added for
domblkstat that prints the fields with more descriptive
texts.
This patch also changes sequence of the output fields and their
names back to the order and spelling established by previous
versions of virsh to maintain compatibility with scripts.
Example of ordered and "translated" output:
PRE-patch:
virsh # domblkstat 1 vda
vda wr_bytes 5170176
vda wr_operations 511
vda rd_bytes 82815488
vda rd_operations 3726
POST-patch:
virsh # domblkstat 1 vda
vda rd_req 3726
vda rd_bytes 82815488
vda wr_req 478
vda wr_bytes 4965376
Example of human readable output:
virsh # domblkstat 1 vda --human
Device: vda
number of read operations: 3726
number of read bytes: 82815488
number of write operations: 478
number of bytes written: 4965376
https://bugzilla.redhat.com/show_bug.cgi?id=731656
Qemu sends STOP event as part of the shutdown process. Detect such STOP
event and consider shutdown to be reason of emitting such event. That's
the best we can do until qemu provides us the reason directly in STOP
event. This allows us to report shutdown reason for paused state so that
apps can detect domains that failed to finish the shutdown process
(e.g., because qemu is buggy and doesn't exit on SIGTERM or it is
blocked in flushing disk buffers).
With this patch, it is hopefully a bit more obvious that for
snapshot-create-as, a literal '--diskspec' is mandatory if name
or description was omitted, but optional if all earlier options
were provided.
These all denote two diskspecs and a description:
virsh snapshot-create-as dom name desc vda vdb
virsh snapshot-create-as dom name desc --diskspec vda --diskspec vdb
virsh snapshot-create-as dom name desc --diskspec vda vdb
virsh snapshot-create-as dom name desc vda --diskspec vdb
virsh snapshot-create-as dom --diskspec vda --diskspec vdb name desc
This gives two diskspecs but no description:
virsh snapshot-create-as dom name --diskspec vda --diskspec vdb
And this treats 'vda' as the description, with only one diskspec:
virsh snapshot-create-as dom name vda vdb
The help output now shows:
snapshot-create-as <domain> [<name>] [<description>] [--print-xml] [--no-metadata] [--halt] [--disk-only] [[--diskspec] <string>]...
I also checked the help output for echo and send-key, which are two
other variants of argv commands.
* tools/virsh.pod (snapshot-create-as): Document when a literal
--diskspec must preceed a diskspec argument.
* tools/virsh.c (vshCmddefHelp): Update help output for argv when
naming the option is useful.
(vshCmddefGetData): Fix logic on when argv was seen.
* tests/virsh-optparse: Add tests to avoid regressions.
Commit 498d783 cleans up some of virtual file names for parsing strings
in memory. This patch cleans up (hopefuly) the rest forgotten by the
first patch.
This patch also changes all of the previously modified "filenames" to
valid URI's replacing spaces for underscores.
Changes to v1:
- Replace all spaces for underscores, so that the strings form valid
URI's
- Replace spaces in places changed by commit 498d783
Commit ffe28ab74b introduced regression
while communicating with older libvirtd command 'domblkstat' used the new
API and did not check for VIR_ERR_RPC error code signalling the remote
server does not support this API and did not fall back to older API.
Thereafter 'domblkstat' ended with "error: unknown procedure: 243".
While parsing XML strings from memory, the previous convention in
libvirt was to set the virtual file name to "domain.xml" or something
similar. This could potentialy trick the user into looking for a file
named domain.xml on the disk in an attempt to fix the error.
This patch changes these filenames to something that can't be as easily
confused for a valid filename.
Examples of error messages:
---------------------------
Error while loading file from disk:
15:07:59.015: 527: error : catchXMLError:709 : /path/to/domain.xml:1: StartTag: invalid element name
<domain type='kvm'><
--------------------^
Error while parsing definition in memory:
15:08:43.581: 525: error : catchXMLError:709 : (domain definition):2: error parsing attribute name
<name>vm1</name>
--^
This has the added benefit of making 'snapshot-create dom --no-metadata'
now able to tell you the name of the just-generated snapshot.
* tools/virsh.c (vshSnapshotCreate, cmdSnapshotCurrent): Don't get
XML just for name.
Two new commands are added to virsh that wrap usage of
virDomainUpdateDeviceFlags for changing link state of domain's network
interfaces. These wrappers extract network devices's xml configuration
and modify the link state for easy manipulation from an user's perspective.
- domif-setlink - set link state of a domains virtual network interface
- domif-getlink - get link state
* tools/virsh.c - Add functionality to virsh
* tools/virsh.pod - Manpage documentation
The modified function fallbacks to use virDomainBlockStats if
virDomainBlockStatsFlags is not supported by the hypervisor driver.
If the new API is supported, it will be invoked instead of the
old API.
Expose the disk-only flag through virsh. Additionally, make
virsh snapshot-create-as take an arbitrary number of diskspecs,
which can be used to build up the xml for <domainsnapshot>.
* tools/virsh.c (cmdSnapshotCreate): Add --disk-only.
(cmdSnapshotCreateAs): Likewise, and add argv diskspec.
(vshParseSnapshotDiskspec): New helper function.
(vshCmddefGetOption): Allow naming of argv field.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
them.
* tests/virsh-optparse: Test snapshot-create-as parsing.
This adds a convenience function to virsh that parses out block
information from the domain xml, making it much easier to see
what strings can be used in all other contexts that demand a
specific block name, especially when given the previous patch
that allows using either target or unique source name.
As an example on a domain with one disk and an empty cdrom drive:
Target Source
-------------------------------------------
vda /var/lib/libvirt/images/fedora_12.img
hdc -
* tools/virsh.c (cmdDomblklist): New function.
* tools/virsh.pod (domblklist): Document it.
In order to distinguish disk snapshots from system checkpoints, a
new state value that is only valid for snapshots is helpful.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_LAST): New placeholder.
* src/conf/domain_conf.h (virDomainSnapshotState): New enum mapping.
(VIR_DOMAIN_DISK_SNAPSHOT): New internal enum value.
* src/conf/domain_conf.c (virDomainState): Use placeholder.
(virDomainSnapshotState): Extend mapping by one for use in snapshot.
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Handle new state.
(virDomainObjSetState, virDomainStateReasonToString)
(virDomainStateReasonFromString): Avoid compiler warnings.
* tools/virsh.c (vshDomainState, vshDomainStateReasonToString):
Likewise.
* src/libvirt_private.syms (domain_conf.h): Export new functions.
* docs/schemas/domainsnapshot.rng: Tighten state definition.
* docs/formatsnapshot.html.in: Document it.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: New test.
Easy enough to emulate even with older servers.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Add
--halt flag.
(vshSnapshotCreate): Emulate halt when flag is unsupported.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
It would technically be possible to have virsh compute the list
of descendants of a given snapshot, then delete those one at
a time. But it's complex, and not worth writing for a first
cut at implementing the new flags.
* tools/virsh.c (cmdSnapshotDelete): Add --children-only,
--metadata.
* tools/virsh.pod (snapshot-delete): Document them.
Similar to 'undefine --managed-save' (commit 83e849c1), we must
assume that the old API is unsafe; however, we cannot emulate
metadata-only deletion on older servers. Additionally, we have
the wrinkle that while virDomainUndefineFlags and managed save
cleanup were introduced in 0.9.4, it wasn't until 0.9.5 that
snapshots block undefine of a domain. Do the best we can given
the server we are talking to.
* tools/virsh.c (cmdUndefine): Add --snapshots-metadata flag.
* tools/virsh.pod (undefine, destroy, shutdown): Document effect
of snapshots.
Wire up the new snapshot creation flags in virsh. For convenience,
teach 'snapshot-current' how to make an existing snapshot become
current (can be used after upgrading to newer libvirt to recover
from the fact that the older libvirt lost track of the current
snapshot after a restart). The snapshot-create-as command is
intentionally not taught --redefine or --current, as this would
imply adding a lot of other options for everything else that can
appear in the <domainsnapshot> xml, but which is normally read-only.
Besides, redefining will usually be done on files created by
snapshot-dumpxml, rather than something built up by hand on the
command line. And now that we can redefine, we can edit.
* tools/virsh.c (cmdSnapshotCreate): Add --redefine, --current,
and --no-metadata.
(cmdSnapshotCreateAs): Add --no-metadata.
(cmdSnapshotCurrent): Add snapshotname to alter current snapshot.
(cmdSnapshotEdit): New command.
* tools/virsh.pod (snapshot-create, snapshot-create-as)
(snapshot-current, snapshot-edit): Document these.
The next patch will make snapshot creation more complex, so it's
better to avoid repetition of the complexity.
* tools/virsh.c (vshSnapshotCreate): New helper function.
(cmdSnapshotCreate, cmdSnapshotCreateAs): Use it.
New flag bits are worth exposing via virsh. In the case of
snapshot-list --roots, it's possible to emulate this even when
talking to an older server that lacks the bit; whereas
--metadata requires a newer server.
Although we don't use --security-info yet, the flag is already
documented for other dumpxml operations, and turning it on now
will make it useful when a future patch actually has to honor it.
* tools/virsh.c (cmdSnapshotDumpXML, cmdSnapshotCurrent): Add
--security-info.
(cmdSnapshotList): Add --roots, --metadata.
* tools/virsh.pod (snapshot-dumpxml, snapshot-current)
(snapshot-list): Document these.
Even though I recently added 'virsh snapshot-parent', doing it one
snapshot at a time is painful, so make it possible to expand the
snapshot-list table at once.
* tools/virsh.c (cmdSnapshotList): Add --parent.
* tools/virsh.pod (snapshot-list): Document it.
Pretty straight-forward exposure of new flags. For most commands,
we let the API reject mutually exclusive flags; but for save-image-edit,
we do the sanity check ourselves to avoid looping on flag failure if
the edit cycle is ever enhanced to allow the user to retry an edit
to fix up an xml validation error.
* tools/virsh.c (cmdManagedSave, cmdRestore, cmdSave)
(cmdSaveImageDefine, cmdSaveImageEdit): Add new flags.
* tools/virsh.pod (managedsave, restore, save, save-image-define)
(save-image-edit): Document them.
The 'virsh man' description of send-key was incomplete and used the
old style (literal 'optional name' instead of '[name]' metasyntax).
Meanwhile, none of the other virsh help texts include examples, so
I moved it out of virsh help and into the man page.
* tools/virsh.pod (send-key): Give better details.
* tools/virsh.c (info_send_key): Drop example from here.
Managed save was added in 0.8.0, virDomainCreateWithFlags in 0.8.2,
and FORCE_BOOT in 0.9.5. The virsh flag is more useful if we
emulate it for all older servers (note that if a hypervisor fails
the query for a managed save image, then it does not have one to
be removed, so the flag can be safely ignored).
* tools/virsh.c (cmdStart): Add emulation for new flag.
* tools/virsh.c: fix memory leak on cmdVolCreateAs function.
* Detected in valgrind run:
==4746==
==4746== 48 (40 direct, 8 indirect) bytes in 1 blocks are definitely lost in loss record 26 of 52
==4746== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==4746== by 0x4C76E51: virAlloc (memory.c:101)
==4746== by 0x4CD9418: virGetStoragePool (datatypes.c:592)
==4746== by 0x4D21367: remoteStoragePoolLookupByName (remote_driver.c:4126)
==4746== by 0x4CE42B0: virStoragePoolLookupByName (libvirt.c:10232)
==4746== by 0x40C276: vshCommandOptPoolBy (virsh.c:13660)
==4746== by 0x40CA37: cmdVolCreateAs (virsh.c:8094)
==4746== by 0x412AF2: vshCommandRun (virsh.c:13770)
==4746== by 0x422F11: main (virsh.c:15127)
==4746==
==4746== 1,011 bytes in 1 blocks are definitely lost in loss record 45 of 52
==4746== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==4746== by 0x4A06167: realloc (vg_replace_malloc.c:525)
==4746== by 0x4C76ECB: virReallocN (memory.c:161)
==4746== by 0x4C60319: virBufferGrow (buf.c:72)
==4746== by 0x4C606AA: virBufferAdd (buf.c:106)
==4746== by 0x40CB37: cmdVolCreateAs (virsh.c:8118)
==4746== by 0x412AF2: vshCommandRun (virsh.c:13770)
==4746== by 0x422F11: main (virsh.c:15127)
==4746==
==4746== LEAK SUMMARY:
==4746== definitely lost: 1,051 bytes in 2 blocks
==4746== indirectly lost: 8 bytes in 1 blocks
==4746== possibly lost: 0 bytes in 0 blocks
==4746== still reachable: 390,767 bytes in 1,373 blocks
==4746== suppressed: 0 bytes in 0 blocks
* How to reproduce?
% valgrind -v --leak-check=full virsh vol-create-as default foo.img 10M \
--allocation 0 --format qcow2 --backing-vol bar.img
Notes: bar.img doesn't exist.
Signed-off-by: Alex Jia <ajia@redhat.com>
virsh had some leftover 'int flags', and even an 'int flag'
declaration, compared to our preferred style of 'unsigned int flags'.
* tools/virsh.c (cmdUndefine, cmdSave, cmdSaveImageDumpxml)
(cmdSaveImageEdit, cmdManagedSave, cmdRestore, cmdDump)
(cmdVcpuPin, cmdSetvcpus, cmdSetmem, cmdSetmaxmem, cmdDumpXML)
(cmdDomXMLFromNative, cmdDomXMLToNative, doMigrate)
(cmdInterfaceEdit, cmdInterfaceDumpXML, cmdEdit): Match coding
style for flags.
(struct vshComdOptDef): Rename field member.
(vshCmddefOptParse, vshCmddefHelp): Adjust clients.
There have been several instances of people having problems with
a broken managed save file, and not aware that they could use
'virsh managedsave-remove dom' to fix things. Making it possible
to do this as part of starting a domain makes the same functionality
easier to find, and one less API call.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_START_FORCE_BOOT): New
flag.
* src/libvirt.c (virDomainCreateWithFlags): Document it.
* src/qemu/qemu_driver.c (qemuDomainObjStart): Alter signature.
(qemuAutostartDomain, qemuDomainStartWithFlags): Update callers.
* tools/virsh.c (cmdStart): Expose it in virsh.
* tools/virsh.pod (start): Document it.
Knowing whether 'virsh start' will resume a saved image or do
a fresh boot is useful enough to expose via 'virsh list'.
Also, translate the state column.
* tools/virsh.c (cmdList): add --managed-save flag
* tools/virsh.pod (list): Document it.
Based on a suggestion by Miklos Vajna.
Without this patch, invoking 'virsh >file 2>&1' results in
error messages appearing before normal output, even if they
occurred later in time than the normal output (since stderr
is unbuffered, but stdout waits until a full buffer).
* tools/virsh.c (print_job_progress, vshError): Flush between
stream transitions.
* tests/undefine: Test it.
Call me lazy, but:
virsh qemu-monitor-command dom --hmp info status
is nicer than:
virsh qemu-monitor-command dom --hmp 'info status'
* tools/virsh.c (cmdQemuMonitorCommand): Allow multiple arguments,
for convenience.
The public API documents that undefine may be used to transition a
running persistent domain into a transient one. Many drivers still
do not support this usage, but virsh shouldn't be getting in the
way of those that do support it.
This also drops a redundant conditional; vshCommandOptString
guaranteed that name was non-NULL.
* tools/virsh.c (cmdUndefine): Allow undefine on active domains;
the drivers may still reject it, but it is a valid API usage.
* tests/undefine (error): Fix the test to match.
Down the road, I want to add virDomainSnapshotGetParent, and use
the new API rather than xml scraping; but this virsh command can
be implemented even without the new API.
* tools/virsh.c (cmdSnapshotParent): New command.
* tools/virsh.pod (snapshot-parent): Document it.
Sometimes, full XML is too much; since most snapshot commands
operate on a snapshot name, there should be an easy way to get
at the current snapshot's name. For example:
virsh snapshot-revert dom `virsh snapshot-current dom --name`
* tools/virsh.c (cmdSnapshotCurrent): Add an option.
* tools/virsh.pod (snapshot-current): Document it.
This commands don't have a --pool option, so don't tell
vshCommandOptVolBy that there could be one. This made
vshCommandOptString for pooloptname fail and an "missing option"
error was reported.
Make pooloptname optional for vshCommandOptVolBy.
* tools/virsh.c: fix missing zero value judgement in cmdBlkiotune and correct
vshError information.
when weight is equal to 0, the cmdBlkiotune will not raise any error information
when judge weight value first time, and execute else branch to judge weight
value again, strncpy(temp->field, VIR_DOMAIN_BLKIO_WEIGHT, sizeof(temp->field))
will be not executed for ever. However, if and only if param->field is equal
to VIR_DOMAIN_BLKIO_WEIGHT, underlying qemuDomainSetBlkioParameters function
will check whether weight value is in range [100, 1000].
* how to reproduce?
% virsh blkiotune ${guestname} --weight 0
Signed-off-by: Alex Jia <ajia@redhat.com>
* tools/virsh.c: avoid memory leak in cmdVolPath.
* src/libvirt.c: Add doc for virStorageVolGetPath to tell one
must free() the returned path after use.
* how to reproduce?
% dd if=/dev/zero of=/var/lib/libvirt/images/foo.img count=1 bs=10M
% virsh pool-refresh default
% valgrind -v --leak-check=full virsh vol-path --vol \
/var/lib/libvirt/images/foo.img
* actual results:
Detected in valgrind run:
==16436== 32 bytes in 1 blocks are definitely lost in loss record 7 of 22
==16436== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==16436== by 0x386A314B3D: xdr_string (in /lib64/libc-2.12.so)
==16436== by 0x3DF8CD770D: xdr_remote_nonnull_string (remote_protocol.c:3
==16436== by 0x3DF8CD7EC8: xdr_remote_storage_vol_get_path_ret
% virsh pool-refresh default
% valgrind -v --leak-check=full virsh vol-path --vol \
/var/lib/libvirt/images/foo.img
Signed-off-by: Alex Jia <ajia@redhat.com>
Rename the existing --current flag to the new name --active,
while adding a new flag --current to expose the new
VIR_DOMAIN_AFFECT_CURRENT flag of virDomainGetVcpusFlags.
For backwards compability, the output does not change (even
though the label "current" no longer matches the spelling of
the option that would trigger that number in isolation), and
we accept "--current --live" as an undocumented synonym for
"--active --live" to avoid breaking any existing clients.
* tools/virsh.c (cmdVcpucount): Add --active flag, and rearrange
existing flag handling to expose VIR_DOMAIN_AFFECT_CURRENT support.
* tools/virsh.pod (vcpucount): Document this.
