This introduces new XML tag "sgio" for disk, its valid values
are "filtered" and "unfiltered", setting it as "filtered" will
set the disk's unpriv_sgio to 0, and "unfiltered" to set it
as 1, which allows the unprivileged SG_IO commands.
The <hostdev> device type has long had a redundant "mode"
attribute, which has always been "subsys". This finally
introduces a new mode "capabilities", which will be used
by the LXC driver for device assignment. Since container
based virtualization uses a single kernel, the idea of
assigning physical PCI devices doesn't make sense. It is
still reasonable to assign USB devices, but for assigning
arbitrary nodes in /dev, the new 'capabilities' mode is
to be used.
The first capability support is 'storage', which is for
assignment of block devices. Functionally this is really
pretty similar to the <disk> support. The only difference
is the device node name is identical in both host and
container namespaces.
<hostdev mode='capabilities' type='storage'>
<source>
<block>/dev/sdf1</block>
</source>
</hostdev>
The second capability support is 'misc', which is for
assignment of character devices. There is no existing
parallel to this. Again the device node is the same
inside & outside the container.
<hostdev mode='capabilities' type='misc'>
<source>
<char>/dev/input/event3</char>
</source>
</hostdev>
The reason for keeping the char & storage devices
separate in the domain XML, is to mirror the split
in the node device XML. NB the node device XML does
not yet report character devices, but that's another
new patch to come
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If there are multiple video devices
primary = 'yes' marks this video device as the primary one.
The rest are secondary video devices. No more than one could be
mark as primary. If none of them has primary attribute, the first
one will be the primary by default like what it was.
The reason of this changing is that for qemu, only one primary video
device is permitted which can be of any type. For secondary video
devices, only qxl is allowd. Primary attribute removes the restriction
that the first have to be the primary one.
We always put the primary video device into the first position of
video device structure array after parsing.
This is however supported only on domain interfaces with
type='network'. Moreover, target network needs to have at least
inbound QoS set. This is required by hierarchical traffic shaping.
From now on, the required attribute for <inbound/> is either 'average'
(old) or 'floor' (new). This new attribute can be used just for
interfaces type of network (<interface type='network'/>) currently.
The DHCPv6 support includes IPV6 dhcp-range and dhcp-host for one
IPv6 subnetwork on one interface. This support will only work
if dnsmasq version >= 2.64; otherwise an error occurs if
dhcp-range or dhcp-host is specified for an IPv6 address.
Essentially, this change provides the same DHCP support for IPv6
that has been available for IPv4.
With dnsmasq >= 2.64, support for the RA service is also now provided
by dnsmasq (radvd is no longer used/started). (Although at least one
version of dnsmasq prior to 2.64 "supported" IPv6 Router
Advertisement, there were bugs (fixed in 2.64) that rendered it
unusable.)
Documentation and the network schema has been updated
to reflect the new support.
QEMU supports setting vendor and product strings for disk since
1.2.0 (only scsi-disk, scsi-hd, scsi-cd support it), this patch
exposes it with new XML elements <vendor> and <product> of disk
device.
This patch adds the capability for virtual guests to do IPv6
communication via a virtual network interface with no IPv6 (gateway)
addresses specified. This capability has always been enabled by
default for IPv4, but disabled for IPv6 for security concerns, and
because it requires the ip6tables command to be operational (which
isn't the case on a system with the ipv6 module completely disabled).
This patch adds a new attribute "ipv6" at the toplevel of a <network>
object. If ipv6='yes', the extra ip6tables rules required to permite
inter-guest communications are added when the network is started. If
it is 'no', or not present, those rules will not be added; thus the
default behavior doesn't change, so there should be no compatibility
issues with any existing installations.
Note that virtual guests cannot communication with the virtualization
host via this interface, because the following kernel tunable has
been set:
net.ipv6.conf.<bridge_interface_name>.disable_ipv6 = 1
This assures that the bridge interface will not have an IPv6
link-local (fe80::) address.
To control this behavior so that it is not enabled by default, the parameter
ipv6='yes' on the <network> statement has been added.
Documentation related to this patch has been updated.
The network schema has also been updated.
This patch introduces the RNG schema and updates necessary data strucutures
to allow various hypervisors to make use of Gluster protocol as one of the
supported network disk backend. Next patch will add support to make use of
this feature in Qemu since it now supports Gluster protocol as one of the
network based storage backend.
Two new optional attributes for <host> element are introduced - 'transport'
and 'socket'. Valid transport values are tcp, unix or rdma. If none specified,
tcp is assumed. If transport is unix, socket specifies path to unix socket.
This patch allows users to specify disks on gluster backends like this:
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='gluster' name='Volume1/image'>
<host name='example.org' port='6000' transport='tcp'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='gluster' name='Volume2/image'>
<host transport='unix' socket='/path/to/sock'/>
</source>
<target dev='vdb' bus='virtio'/>
</disk>
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Each <domainsnapshot> can now contain an optional <memory>
element that describes how the VM state was handled, similar
to disk snapshots. The new element will always appear in
output; for back-compat, an input that lacks the element will
assume 'no' or 'internal' according to the domain state.
Along with this change, it is now possible to pass <disks> in
the XML for an offline snapshot; this also needs to be wired up
in a future patch, to make it possible to choose internal vs.
external on a per-disk basis for each disk in an offline domain.
At that point, using the --disk-only flag for an offline domain
will be able to work.
For some examples below, remember that qemu supports the
following snapshot actions:
qemu-img: offline external and internal disk
savevm: online internal VM and disk
migrate: online external VM
transaction: online external disk
=====
<domainsnapshot>
<memory snapshot='no'/>
...
</domainsnapshot>
implies that there is no VM state saved (mandatory for
offline and disk-only snapshots, not possible otherwise);
using qemu-img for offline domains and transaction for online.
=====
<domainsnapshot>
<memory snapshot='internal'/>
...
</domainsnapshot>
state is saved inside one of the disks (as in qemu's 'savevm'
system checkpoint implementation). If needed in the future,
we can also add an attribute pointing out _which_ disk saved
the internal state; maybe disk='vda'.
=====
<domainsnapshot>
<memory snapshot='external' file='/path/to/state'/>
...
</domainsnapshot>
This is not wired up yet, but future patches will allow this to
control a combination of 'virsh save /path/to/state' plus disk
snapshots from the same point in time.
=====
So for 1.0.1 (and later, as needed), I plan to implement this table
of combinations, with '*' designating new code and '+' designating
existing code reached through new combinations of xml and/or the
existing DISK_ONLY flag:
domain memory disk disk-only | result
-----------------------------------------
offline omit omit any | memory=no disk=int, via qemu-img
offline no omit any |+memory=no disk=int, via qemu-img
offline omit/no no any | invalid combination (nothing to snapshot)
offline omit/no int any |+memory=no disk=int, via qemu-img
offline omit/no ext any |*memory=no disk=ext, via qemu-img
offline int/ext any any | invalid combination (no memory to save)
online omit omit off | memory=int disk=int, via savevm
online omit omit on | memory=no disk=default, via transaction
online omit no/ext off | unsupported for now
online omit no on | invalid combination (nothing to snapshot)
online omit ext on | memory=no disk=ext, via transaction
online omit int off |+memory=int disk=int, via savevm
online omit int on | unsupported for now
online no omit any |+memory=no disk=default, via transaction
online no no any | invalid combination (nothing to snapshot)
online no int any | unsupported for now
online no ext any |+memory=no disk=ext, via transaction
online int/ext any on | invalid combination (disk-only vs. memory)
online int omit off |+memory=int disk=int, via savevm
online int no/ext off | unsupported for now
online int int off |+memory=int disk=int, via savevm
online ext omit off |*memory=ext disk=default, via migrate+trans
online ext no off |+memory=ext disk=no, via migrate
online ext int off | unsupported for now
online ext ext off |*memory=ext disk=ext, via migrate+transaction
* docs/schemas/domainsnapshot.rng (memory): New RNG element.
* docs/formatsnapshot.html.in: Document it.
* src/conf/snapshot_conf.h (virDomainSnapshotDef): New fields.
* src/conf/domain_conf.c (virDomainSnapshotDefFree)
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Manage new fields.
* tests/domainsnapshotxml2xmltest.c: New test.
* tests/domainsnapshotxml2xmlin/*.xml: Update existing tests.
* tests/domainsnapshotxml2xmlout/*.xml: Likewise.
At one point, the code passed through arbitrary strings for file
formats, which supposedly lets qemu handle a new file type even
before libvirt has been taught to handle it. However, to properly
label files, libvirt has to learn the file type anyway, so we
might as well make our life easier by only accepting file types
that we are prepared to handle. This patch lets the RNG validation
ensure that only known strings are let through.
* docs/schemas/domaincommon.rng (driverFormat): Limit to list of
supported strings.
* docs/schemas/domainsnapshot.rng (driver): Likewise.
Hypervisors are starting to support HyperV Enlightenment features that
improve behavior of guests running Microsoft Windows operating systems.
This patch adds support for the "relaxed" feature that improves timer
behavior and also establishes a framework to add these features in
future.
When startupPolicy set for a USB devices allows such device to be
missing, there was no way this could be detected from domain XML. With
this patch, libvirt emits a new missing='yes' attribute for such devices
when active domain XML is generated.
USB devices can disappear without OS being mad about it, which makes
them ideal for startupPolicy. With this attribute, USB devices can be
configured to be mandatory (the default), requisite (will disappear
during migration if they cannot be found), or completely optional.
While current on_{poweroff,reboot,crash} action configuration is about
configuring life cycle actions, they can all be considered events and
actions that need to be done on a particular event. Let's generalize the
code by renaming life cycle actions to event actions so that it can be
reused later for non-lifecycle events.
This allows the user to control labelling of each character device
separately (the default is to inherit from the VM).
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Sometimes when guest machine crashes, coredump can get huge due to the
guest memory. This can be limited using madvise(2) system call and is
being used in QEMU hypervisor. This patch adds an option for configuring
that in the domain XML and related documentation.
Whenever the guest machine fails to boot, new parameter (reboot-timeout)
controls whether it should reboot and after how many ms it should do so.
Docs included.
New options is added to support EOI (End of Interrupt) exposure for
guests. As it makes sense only when APIC is enabled, I added this into
the <apic> element in <features> because this should be tri-state
option (cannot be handled as standalone feature).
After discussion with DB we decided to rename the new iolimit
element as it creates the impression it would be there to
limit (i.e. throttle) I/O instead of specifying immutable
characteristics of a block device.
This is also backed by the fact that the term I/O Limits has
vanished from newer storage admin documentation.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
There is a new <pm/> element implemented that can control what ACPI
sleeping states will be advertised by BIOS and allowed to be switched
to by libvirt. The default keeps defaults on hypervisor, otherwise
forces chosen setting.
The documentation of the pm element is added as well.
Introducing a new iolimits element allowing to override certain
properties of a guest block device like the physical and logical
block size.
This can be useful for platforms with 'non-standard' disk formats
like S390 DASD with its 4K block size.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This patch introduces support of setting emulator's period and
quota to limit cpu bandwidth when the vm starts. Also updates
XML Schema for new entries and docs.
This patch adds a new xml element <emulatorpin>, which is a sibling
to the existing <vcpupin> element under the <cputune>, to pin emulator
threads to specified physical CPUs.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
A hypervisor may allow to override the disk geometry of drives.
Qemu, as an example with cyls=,heads=,secs=[,trans=].
This patch extends the domain config to allow the specification of
disk geometry with libvirt.
Signed-off-by: J.B. Joret <jb@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This patch updates the domain and capability XML parser and formatter to
support more than one "seclabel" element for each domain and device. The
RNG schema and the tests related to this are also updated by this patch.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
This patch introduces the new forward mode='hostdev' along with
attribute managed. Includes updates to the network RNG and new xml
parser/formatter code.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
The following config elements now support a <vlan> subelements:
within a domain: <interface>, and the <actual> subelement of <interface>
within a network: the toplevel, as well as any <portgroup>
Each vlan element must have one or more <tag id='n'/> subelements. If
there is more than one tag, it is assumed that vlan trunking is being
requested. If trunking is required with only a single tag, the
attribute "trunk='yes'" should be added to the toplevel <vlan>
element.
Some examples:
<interface type='hostdev'/>
<vlan>
<tag id='42'/>
</vlan>
<mac address='52:54:00:12:34:56'/>
...
</interface>
<network>
<name>vlan-net</name>
<vlan trunk='yes'>
<tag id='30'/>
</vlan>
<virtualport type='openvswitch'/>
</network>
<interface type='network'/>
<source network='vlan-net'/>
...
</interface>
<network>
<name>trunk-vlan</name>
<vlan>
<tag id='42'/>
<tag id='43'/>
</vlan>
...
</network>
<network>
<name>multi</name>
...
<portgroup name='production'/>
<vlan>
<tag id='42'/>
</vlan>
</portgroup>
<portgroup name='test'/>
<vlan>
<tag id='666'/>
</vlan>
</portgroup>
</network>
<interface type='network'/>
<source network='multi' portgroup='test'/>
...
</interface>
IMPORTANT NOTE: As of this patch there is no backend support for the
vlan element for *any* network device type. When support is added in
later patches, it will only be for those select network types that
support setting up a vlan on the host side, without the guest's
involvement. (For example, it will be possible to configure a vlan for
a guest connected to an openvswitch bridge, but it won't be possible
to do that for one that is connected to a standard Linux host bridge.)
<portgroup> allows a <bandwidth> element, but the schema didn't have
this. Since this makes for multiple elements in portgroup, they must
be interleaved.
<interface type='bridge'> needs to allow <virtualport> elements
for openvswitch, but the schema didn't allow this.
Just as each physical device used by a network has a connections
counter, now each network has a connections counter which is
incremented once for each guest interface that connects using this
network.
The count is output in the live network XML, like this:
<network connections='20'>
...
</network>
It is read-only, and for informational purposes only - it isn't used
internally anywhere by libvirt.
Until now, all attributes in a <virtualport> parameter list that were
acceptable for a particular type, were also required. There were no
optional attributes.
One of the aims of supporting <virtualport> in libvirt's virtual
networks and portgroups is to allow specifying the group-wide
parameters in the network's virtualport, and merge that with the
interface's virtualport, which will have the instance-specific info
(i.e. the interfaceid or instanceid).
Additionally, the guest's interface XML shouldn't need to know what
type of network connection will be used prior to runtime - it could be
openvswitch, 802.1Qbh, 802.1Qbg, or none of the above - but should
still be able to specify instance-specific info just in case it turns
out to be applicable.
Finally, up to now, the parser for virtualport has always generated a
random instanceid/interfaceid when appropriate, making it impossible
to leave it blank (which is what's required for virtualports within a
network/portprofile definition).
This patch modifies the parser and formatter of the <virtualport>
element in the following ways:
* because most of the attributes in a virNetDevVPortProfile are fixed
size binary data with no reserved values, there is no way to embed a
"this value wasn't specified" sentinel into the existing data. To
solve this problem, the new *_specified fields in the
virNetDevVPortProfile object that were added in a previous patch of
this series are now set when the corresponding attribute is present
during the parse.
* allow parsing/formatting a <virtualport> that has no type set. In
this case, all fields are settable, but all are also optional.
* add a GENERATE_MISSING_DEFAULTS flag to the parser - if this flag is
set and an instanceid/interfaceid is expected but not provided, a
random one will be generated. This was previously the default
behavior, but is now done only for virtualports inside an
<interface> definition, not for those in <network> or <portgroup>.
* add a REQUIRE_ALL_ATTRIBUTES flag to the parser - if this flag is
set the parser will call the new
virNetDevVPortProfileCheckComplete() functions at the end of the
parser to check for any missing attributes (based on type), and
return failure if anything is missing. This used to be default
behavior. Now it is only used for the virtualport defined inside an
interface's <actual> element (by the time you've figured out the
contents of <actual>, you should have all the necessary data to fill
in the entire virtualport)
* add a REQUIRE_TYPE flag to the parser - if this flag is set, the
parser will return an error if the virtualport has no type
attribute. This also was previously the default behavior, but isn't
needed in the case of the virtualport for a type='network' interface
(i.e. the exact type isn't yet known), or the virtualport of a
portgroup (i.e. the portgroup just has modifiers for the network's
virtualport, which *does* require a type) - in those cases, the
check will be done at domain startup, once the final virtualport is
assembled (this is handled in the next patch).
The access, birth, modification and change times are added to
storage volumes and corresponding xml representations. This
shows up in the XML in this format:
<timestamps>
<atime>1341933637.027319099</atime>
<mtime>1341933637.027319099</mtime>
</timestamps>
Signed-off-by: Eric Blake <eblake@redhat.com>
capability.rng: Guest features can be in any order.
nodedev.rng: Added <driver> element, <capability> phys_function and
virt_functions for PCI devices.
storagepool.rng: Owner or group ID can be -1.
schema tests: New capabilities and nodedev files; changed owner and
group to -1 in pool-dir.xml.
storage_conf: Print uid_t and gid_t as signed to storage pool XML.
Libvirt adds a USB controller to the guest even if the user does not
specify any in the XML. This is due to back-compat reasons.
To allow disabling USB for a guest this patch adds a new USB controller
type "none" that disables USB support for the guest.
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.
A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.
A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.
In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.
<disk type='network'>
...
<source protocol="sheepdog" name="vdi_name">
<host name="localhost" port="7000"/>
</source>
</disk>
To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
Added s390-virtio machine type to the XML schema for domains in order
to not fail the domain schema tests.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Currently you can configure LXC to bind a host directory to
a guest directory, but not to bind a guest directory to a
guest directory. While the guest container init could do
this itself, allowing it in the libvirt XML means a stricter
SELinux policy can be written
Introduce a new syntax for filesystems to allow use of a RAM
filesystem
<filesystem type='ram'>
<source usage='10' units='MiB'/>
<target dir='/mnt'/>
</filesystem>
The usage units default to KiB to limit consumption of host memory.
* docs/formatdomain.html.in: Document new syntax
* docs/schemas/domaincommon.rng: Add new attributes
* src/conf/domain_conf.c: Parsing/formatting of RAM filesystems
* src/lxc/lxc_container.c: Mounting of RAM filesystems
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
'boot' tag shouldn't be exclusive with 'kernel', 'initrd', and 'cmdline',
though the boot sequence doesn't make sense when the guest boots from
kernel directly. But it's useful if booting from kernel is to install
a newguest, even if it's not to install a guest, there is no hurt. And
on the other hand, we allow 'boot' and the kernel tags when parsing.
This patch adds support for a new storage backend with RBD support.
RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.
It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.
To function this backend relies on librbd and librados being present on the
local system.
The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.
For storing credentials it uses the built-in secret mechanism of libvirt.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This patch adds support for the recent ipset iptables extension
to libvirt's nwfilter subsystem. Ipset allows to maintain 'sets'
of IP addresses, ports and other packet parameters and allows for
faster lookup (in the order of O(1) vs. O(n)) and rule evaluation
to achieve higher throughput than what can be achieved with
individual iptables rules.
On the command line iptables supports ipset using
iptables ... -m set --match-set <ipset name> <flags> -j ...
where 'ipset name' is the name of a previously created ipset and
flags is a comma-separated list of up to 6 flags. Flags use 'src' and 'dst'
for selecting IP addresses, ports etc. from the source or
destination part of a packet. So a concrete example may look like this:
iptables -A INPUT -m set --match-set test src,src -j ACCEPT
Since ipset management is quite complex, the idea was to leave ipset
management outside of libvirt but still allow users to reference an ipset.
The user would have to make sure the ipset is available once the VM is
started so that the iptables rule(s) referencing the ipset can be created.
Using XML to describe an ipset in an nwfilter rule would then look as
follows:
<rule action='accept' direction='in'>
<all ipset='test' ipsetflags='src,src'/>
</rule>
The two parameters on the command line are also the two distinct XML attributes
'ipset' and 'ipsetflags'.
FYI: Here is the man page for ipset:
https://ipset.netfilter.org/ipset.man.html
Regards,
Stefan
Though numad will manage the memory allocation of task dynamically,
it wants management application (libvirt) to pre-set the memory
policy according to the advisory nodeset returned from querying numad,
(just like pre-bind CPU nodeset for domain process), and thus the
performance could benefit much more from it.
This patch introduces new XML tag 'placement', value 'auto' indicates
whether to set the memory policy with the advisory nodeset from numad,
and its value defaults to the value of <vcpu> placement, or 'static'
if 'nodeset' is specified. Example of the new XML tag's usage:
<numatune>
<memory placement='auto' mode='interleave'/>
</numatune>
Just like what current "numatune" does, the 'auto' numa memory policy
setting uses libnuma's API too.
If <vcpu> "placement" is "auto", and <numatune> is not specified
explicitly, a default <numatume> will be added with "placement"
set as "auto", and "mode" set as "strict".
The following XML can now fully drive numad:
1) <vcpu> placement is 'auto', no <numatune> is specified.
<vcpu placement='auto'>10</vcpu>
2) <vcpu> placement is 'auto', no 'placement' is specified for
<numatune>.
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='interleave'/>
</numatune>
And it's also able to control the CPU placement and memory policy
independently. e.g.
1) <vcpu> placement is 'auto', and <numatune> placement is 'static'
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='strict' nodeset='0-10,^7'/>
</numatune>
2) <vcpu> placement is 'static', and <numatune> placement is 'auto'
<vcpu placement='static' cpuset='0-24,^12'>10</vcpu>
<numatune>
<memory mode='interleave' placement='auto'/>
</numatume>
A follow up patch will change the XML formatting codes to always output
'placement' for <vcpu>, even it's 'static'.
qemu's behavior in this case is to change the spice server behavior to
require secure connection to any channel not otherwise specified as
being in plaintext mode. libvirt doesn't currently allow requesting this
(via plaintext-channel=<channel name>).
RHBZ: 819499
Signed-off-by: Alon Levy <alevy@redhat.com>
In order to track a block copy job across libvirtd restarts, we
need to save internal XML that tracks the name of the file
holding the mirror. Displaying this name in dumpxml might also
be useful to the user, even if we don't yet have a way to (re-)
start a domain with mirroring enabled up front. This is done
with a new <mirror> sub-element to <disk>, as in:
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/original.img'/>
<mirror file='/var/lib/libvirt/images/copy.img' format='qcow2' ready='yes'/>
...
</disk>
For now, the element is output-only, in live domains; it is ignored
when defining a domain or hot-plugging a disk (since those contexts
use VIR_DOMAIN_XML_INACTIVE in parsing). The 'ready' attribute appears
when libvirt knows that the job has changed from the initial pulling
phase over to the mirroring phase, although absence of the attribute
is not a sure indicator of the current phase. If we come up with a way
to make qemu start with mirroring enabled, we can relax the xml
restriction, and allow <mirror> (but not attribute 'ready') on input.
Testing active-only XML meant tweaking the testsuite slightly, but it
was worth it.
* docs/schemas/domaincommon.rng (diskspec): Add diskMirror.
* docs/formatdomain.html.in (elementsDisks): Document it.
* src/conf/domain_conf.h (_virDomainDiskDef): New members.
* src/conf/domain_conf.c (virDomainDiskDefFree): Clean them.
(virDomainDiskDefParseXML): Parse them, but only internally.
(virDomainDiskDefFormat): Output them.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: New test file.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror.xml: Likewise.
* tests/qemuxml2xmltest.c (testInfo): Alter members.
(testCompareXMLToXMLHelper): Allow more test control.
(mymain): Run new test.
<filesystemtgt> is redundant, as every group uses it; <address>
shouldn't be in <filesystemtgt> in case of the meaning could be
"filesystemtarget"; The elements <address>, <alias>, <target>,
... should be interleaved.
Since Xen 3.1 the clock=variable semantic is supported. In addition to
qemu/kvm Xen also knows about a variant where the offset is relative to
'localtime' instead of 'utc'.
Extends the libvirt structure with a flag 'basis' to specify, if the
offset is relative to 'localtime' or 'utc'.
Extends the libvirt structure with a flag 'reset' to force the reset
behaviour of 'localtime' and 'utc'; this is needed for backward
compatibility with previous versions of libvirt, since they report
incorrect XML.
Adapt the only user 'qemu' to the new name.
Extend the RelaxNG schema accordingly.
Document the new 'basis' attribute in the HTML documentation.
Adapt test for the new attribute.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Pass argv to the init binary of LXC, using a new <initarg> element.
* docs/formatdomain.html.in: Document <os> usage for containers
* docs/schemas/domaincommon.rng: Add <initarg> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and
formatting of <initarg>
* src/lxc/lxc_container.c: Setup LXC argv
* tests/Makefile.am, tests/lxcxml2xmldata/lxc-systemd.xml,
tests/lxcxml2xmltest.c, tests/testutilslxc.c,
tests/testutilslxc.h: Test parsing/formatting of LXC related
XML parts
A few times libvirt users manually setting mac addresses have
complained of a networking failure that ends up being due to a multicast
mac address being used for a guest interface. This patch prevents that
by logging an error and failing if a multicast mac address is
encountered in each of the three following cases:
1) domain xml <interface> mac address.
2) network xml bridge mac address.
3) network xml dhcp/host mac address.
There are several other places where a mac address can be input that
aren't controlled in this manner because failure to do so has no
consequences (e.g., if the address will be used to search through
existing interfaces for a match).
The RNG has been updated to add multiMacAddr and uniMacAddr along with
the existing macAddr, and macAddr was switched to uniMacAddr where
appropriate.
If no <interface> elements are included in an LXC guest XML
description, then the LXC guest will just see the host's
network interfaces. It is desirable to be able to hide the
host interfaces, without having to define any guest interfaces.
This patch introduces a new feature flag <privnet/> to allow
forcing of a private network namespace for LXC. In the future
I also anticipate that we will add <privuser/> to force a
private user ID namespace.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add support
for <privnet/> feature. Auto-set <privnet> if any <interface>
devices are defined
* src/lxc/lxc_container.c: Honour request for private network
namespace
numad is an user-level daemon that monitors NUMA topology and
processes resource consumption to facilitate good NUMA resource
alignment of applications/virtual machines to improve performance
and minimize cost of remote memory latencies. It provides a
pre-placement advisory interface, so significant processes can
be pre-bound to nodes with sufficient available resources.
More details: http://fedoraproject.org/wiki/Features/numad
"numad -w ncpus:memory_amount" is the advisory interface numad
provides currently.
This patch add the support by introducing a new XML attribute
for <vcpu>. e.g.
<vcpu placement="auto">4</vcpu>
<vcpu placement="static" cpuset="1-10^6">4</vcpu>
The returned advisory nodeset from numad will be printed
in domain's dumped XML. e.g.
<vcpu placement="auto" cpuset="1-10^6">4</vcpu>
If placement is "auto", the number of vcpus and the current
memory amount specified in domain XML will be used for numad
command line (numad uses MB for memory amount):
numad -w $num_of_vcpus:$current_memory_amount / 1024
The advisory nodeset returned from numad will be used to set
domain process CPU affinity then. (e.g. qemuProcessInitCpuAffinity).
If the user specifies both CPU affinity policy (e.g.
(<vcpu cpuset="1-10,^7,^8">4</vcpu>) and placement == "auto"
the specified CPU affinity will be overridden.
Only QEMU/KVM drivers support it now.
See docs update in patch for more details.
If there is a disk file with a comma in the name, QEmu expects a double
comma instead of a single one (e.g., the file "virtual,disk.img" needs
to be specified as "virtual,,disk.img" in QEmu's command line). This
patch fixes libvirt to work with that feature. Fix RHBZ #801036.
Based on an initial patch by Crístian Viana.
* src/util/buf.h (virBufferEscape): Alter signature.
* src/util/buf.c (virBufferEscape): Add parameter.
(virBufferEscapeSexpr): Fix caller.
* src/qemu/qemu_command.c (qemuBuildRBDString): Likewise. Also
escape commas in file names.
(qemuBuildDriveStr): Escape commas in file names.
* docs/schemas/basictypes.rng (absFilePath): Relax RNG to allow
commas in input file names.
* tests/qemuxml2argvdata/*-disk-drive-network-sheepdog.*: Update
test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Output is still in kibibytes, but input can now be in different
scales for ease of typing.
* src/conf/domain_conf.c (virDomainParseMemory): New helper.
(virDomainDefParseXML): Use it when parsing.
* docs/schemas/domaincommon.rng: Expand XML; rename memoryKBElement
to memoryElement and update callers.
* docs/formatdomain.html.in (elementsMemoryAllocation): Document
scaling.
* tests/qemuxml2argvdata/qemuxml2argv-memtune.xml: Adjust test.
* tests/qemuxml2xmltest.c: Likewise.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-memtune.xml: New file.
The test domain allows <memory>0</memory>, but the RNG was stating
that memory had to be at least 4096000 bytes. Hypervisors should
enforce their own limits, rather than complicating the RNG.
Meanwhile, some copy and paste had introduced some fishy constructs
in various unit tests.
* docs/schemas/domaincommon.rng (memoryKB, memoryKBElement): Drop
limit that isn't enforced in code.
* src/conf/domain_conf.c (virDomainDefParseXML): Require current
<= maximum.
* tests/qemuxml2argvdata/*.xml: Fix offenders.
Disk manufacturers are fond of quoting sizes in powers of 10,
rather than powers of 2 (after all, 2.1 GB sounds larger than
2.0 GiB, even though the exact opposite is true). So, we might
as well follow coreutils' lead in supporting three types of
suffix: single letter ${u} (which we already had) and ${u}iB
for the power of 2, and ${u}B for power of 10.
Additionally, it is impossible to create a file with more than
2**63 bytes, since off_t is signed (if you have enough storage
to even create one 8EiB file, I'm jealous). This now reports
failure up front rather than down the road when the kernel
finally refuses an impossible size.
* docs/schemas/basictypes.rng (unit): Add suffixes.
* src/conf/storage_conf.c (virStorageSize): Use new function.
* docs/formatstorage.html.in: Document it.
* tests/storagevolxml2xmlin/vol-file-backing.xml: Test it.
* tests/storagevolxml2xmlin/vol-file.xml: Likewise.
Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.
Tests were updated via:
$ find tests/*data tests/*out -name '*.xml' | \
xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"
followed by a few fixes for the stragglers.
Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.
* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
The code supported unit='E' for "exabyte", but the RNG did not;
conversely, the RNG supported "z" and "y" but the code did not
(I'm jealous if you have that much storage, particularly since
it won't fit in 64-bit off_t). Also, the code supported
<allocation unit='...'>, but not the RNG.
In an effort to make 'unit' more worthwhile in future patches,
it's easier to share it between files.
In making this factorization, note that absFilePath is more
permissive than 'path', so storage pools and storage volumes
will now validate with a wider set of file names than before.
I don't think this should be a problem in practice.
* docs/schemas/storagepool.rng: Include basic types, rather than
repeating things here.
* docs/schemas/storagevol.rng: Likewise.
* docs/schemas/basictypes.rng: Add 'unsignedLong', 'unit', and fix
to match storage code.
This is the new interface type that sets up an SR-IOV PCI network
device to be assigned to the guest with PCI passthrough after
initializing some network device-specific things from the config
(e.g. MAC address, virtualport profile parameters). Here is an example
of the syntax:
<interface type='hostdev' managed='yes'>
<source>
<address type='pci' domain='0' bus='0' slot='4' function='3'/>
</source>
<mac address='00:11:22:33:44:55'/>
<address type='pci' domain='0' bus='0' slot='7' function='0'/>
</interface>
This would assign the PCI card from bus 0 slot 4 function 3 on the
host, to bus 0 slot 7 function 0 on the guest, but would first set the
MAC address of the card to 00:11:22:33:44:55.
NB: The parser and formatter don't care if the PCI card being
specified is a standard single function network adapter, or a virtual
function (VF) of an SR-IOV capable network adapter, but the upcoming
code that implements the back end of this config will work *only* with
SR-IOV VFs. This is because modifying the mac address of a standard
network adapter prior to assigning it to a guest is pointless - part
of the device reset that occurs during that process will reset the MAC
address to the value programmed into the card's firmware.
Although it's not supported by any of libvirt's hypervisor drivers,
usb network hostdevs are also supported in the parser and formatter
for completeness and consistency. <source> syntax is identical to that
for plain <hostdev> devices, except that the <address> element should
have "type='usb'" added if bus/device are specified:
<interface type='hostdev'>
<source>
<address type='usb' bus='0' device='4'/>
</source>
<mac address='00:11:22:33:44:55'/>
</interface>
If the vendor/product form of usb specification is used, type='usb'
is implied:
<interface type='hostdev'>
<source>
<vendor id='0x0012'/>
<product id='0x24dd'/>
</source>
<mac address='00:11:22:33:44:55'/>
</interface>
Again, the upcoming patch to fill in the backend of this functionality
will log an error and fail with "Unsupported Config" if you actually
try to assign a USB network adapter to a guest using <interface
type='hostdev'> - just use a standard <hostdev> entry in that case
(and also for single-port PCI adapters).
* src/conf/domain_conf.h: Add new member "target" to struct
_virDomainDeviceDriveAddress.
* src/conf/domain_conf.c: Parse and format "target"
* Lots of tests (.xml) in tests/domainsnapshotxml2xmlout,
tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and
tests/vmx2xmldata/ are modified for newly introduced
attribute "target" for address of "drive" type.
KVM will be able to use a PCI SCSI controller even on POWER. Let
the user specify the vSCSI controller by other means than a default.
After this patch, the QEMU driver will actually look at the model
and reject anything but auto, lsilogic and ibmvscsi.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
Commit b170eb99 introduced a bug: domains that had an explicit
<seclabel type='none'/> when started would not be reparsed if
libvirtd restarted. It turns out that our testsuite was not
exercising this because it never tried anything but inactive
parsing. Additionally, the live XML for such a domain failed
to re-validate. Applying just the tests/ portion of this patch
will expose the bugs that are fixed by the other two files.
* docs/schemas/domaincommon.rng (seclabel): Allow relabel under
type='none'.
* src/conf/domain_conf.c (virSecurityLabelDefParseXML): Per RNG,
presence of <seclabel> with no type implies dynamic. Don't
require sub-elements for type='none'.
* tests/qemuxml2xmltest.c (mymain): Add test.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-none.xml: Add file.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-none.args: Add file.
Reported by Ansis Atteka.
Curently security labels can be of type 'dynamic' or 'static'.
If no security label is given, then 'dynamic' is assumed. The
current code takes advantage of this default, and avoids even
saving <seclabel> elements with type='dynamic' to disk. This
means if you temporarily change security driver, the guests
can all still start.
With the introduction of sVirt to LXC though, there needs to be
a new default of 'none' to allow unconfined LXC containers.
This patch introduces two new security label types
- default: the host configuration decides whether to run the
guest with type 'none' or 'dynamic' at guest start
- none: the guest will run unconfined by security policy
The 'none' label type will obviously be undesirable for some
deployments, so a new qemu.conf option allows a host admin to
mandate confined guests. It is also possible to turn off default
confinement
security_default_confined = 1|0 (default == 1)
security_require_confined = 1|0 (default == 0)
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add new
seclabel types
* src/security/security_manager.c, src/security/security_manager.h:
Set default sec label types
* src/security/security_selinux.c: Handle 'none' seclabel type
* src/qemu/qemu.conf, src/qemu/qemu_conf.c, src/qemu/qemu_conf.h,
src/qemu/libvirtd_qemu.aug: New security config options
* src/qemu/qemu_driver.c: Tell security driver about default
config
This patch adds a new element <title> to the domain XML. This attribute
can hold a short title defined by the user to ease the identification of
domains. The title may not contain newlines and should be reasonably short.
*docs/formatdomain.html.in
*docs/schemas/domaincommon.rng
- add schema grammar for the new element and documentation
*src/conf/domain_conf.c
*src/conf/domain_conf.h
- add field to hold the new attribute
- add code to parse and create XML with the new attribute
Commit 8a09ee410 tickles a bug in libxml2-2.7.6 on RHEL 6.2,
where libxml2 treats the pattern [^\n] as excluding literal
backslash and n, instead of the intended newline, thus failing
to validate any domain name containing 'n'.
* docs/schemas/domaincommon.rng: Use literal newline instead.
This patch adds a new attribute "rawio" to the "disk" element
of domain XML. Valid values of "rawio" attribute are "yes"
and "no".
rawio='yes' indicates the disk is desirous of CAP_SYS_RAWIO.
If you specify the following XML:
<disk type='block' device='lun' rawio='yes'>
...
</disk>
the domain will be granted CAP_SYS_RAWIO.
(of course, the domain have to be executed with root privilege)
NOTE:
- "rawio" attribute is only valid when device='lun'
- At the moment, any other disks you won't use rawio can use rawio.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This patch addresses: https://bugzilla.redhat.com/show_bug.cgi?id=781562
Along with the "rombar" option that controls whether or not a boot rom
is made visible to the guest, qemu also has a "romfile" option that
allows specifying a binary file to present as the ROM BIOS of any
emulated or passthrough PCI device. This patch adds support for
specifying romfile to both passthrough PCI devices, and emulated
network devices that attach to the guest's PCI bus (just about
everything other than ne2k_isa).
One example of the usefulness of this option is described in the
bugzilla report: 82576 sriov network adapters don't provide a ROM BIOS
for the cards virtual functions (VF), but an image of such a ROM is
available, and with this ROM visible to the guest, it can PXE boot.
In libvirt's xml, the new option is configured like this:
<hostdev>
...
<rom file='/etc/fake/boot.bin'/>
...
</hostdev
(similarly for <interface>).
When support for the rombar option was added, it was only added for
PCI passthrough devices, configured with <hostdev>. The same option is
available for any network device that is attached to the guest's PCI
bus. This patch allows setting rombar for any PCI network device type.
After adding cases to test this to qemuxml2argv-hostdev-pci-rombar.*,
I decided to rename those files (to qemuxml2argv-pci-rom.*) to more
accurately reflect the additional tests, and also noticed that up to
now we've only been performing a domainschematest for that case, so I
added the "pci-rom" test to both qemuxml2argv and qemuxml2xml (and in
the process found some bugs whose fixes I squashed into previous
commits of this series).
Add kvmclock timer to documentation, schema and parsers. Keep the
platform timer first since it is kind of special, and alphabetize
the others when possible (i.e. when it does not change the ABI).
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The domain schema enforced restrictions on the domain name string that
the code doesn't. This patch relaxes the check, leaving the restrictions
on the driver or hypervisor. The only invalid character is a newline.
Applications can now insert custom nodes and hierarchies into domain
configuration XML. Although currently not enforced, applications are
required to use their own namespaces on every custom node they insert,
with only one top-level element per namespace.
This introduces new attribute wrpolicy with only supported
value as immediate. This will be an optional
attribute with no defaults. This helps specify whether
to skip the host page cache.
When wrpolicy is specified, meaning when wrpolicy=immediate
a writeback is explicitly initiated for the dirty pages in
the host page cache as part of the guest file write operation.
Usage:
<filesystem type='mount' accessmode='passthrough'>
<driver type='path' wrpolicy='immediate'/>
<source dir='/export/to/guest'/>
<target dir='mount_tag'/>
</filesystem>
Currently this only works with type='mount' for the QEMU/KVM driver.
Signed-off-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com>
The mode can be either of "custom" (default), "host-model",
"host-passthrough". The semantics of each mode is described in the
following examples:
- guest CPU is a default model with specified topology:
<cpu>
<topology sockets='1' cores='2' threads='1'/>
</cpu>
- guest CPU matches selected model:
<cpu mode='custom' match='exact'>
<model>core2duo</model>
</cpu>
- guest CPU should be a copy of host CPU as advertised by capabilities
XML (this is a short cut for manually copying host CPU specification
from capabilities to domain XML):
<cpu mode='host-model'/>
In case a hypervisor does not support the exact host model, libvirt
automatically falls back to a closest supported CPU model and
removes/adds features to match host. This behavior can be disabled by
<cpu mode='host-model'>
<model fallback='forbid'/>
</cpu>
- the same as previous returned by virDomainGetXMLDesc with
VIR_DOMAIN_XML_UPDATE_CPU flag:
<cpu mode='host-model' match='exact'>
<model fallback='allow'>Penryn</model> --+
<vendor>Intel</vendor> |
<topology sockets='2' cores='4' threads='1'/> + copied from
<feature policy='require' name='dca'/> | capabilities XML
<feature policy='require' name='xtpr'/> |
... --+
</cpu>
- guest CPU should be exactly the same as host CPU even in the aspects
libvirt doesn't model (such domain cannot be migrated unless both
hosts contain exactly the same CPUs):
<cpu mode='host-passthrough'/>
- the same as previous returned by virDomainGetXMLDesc with
VIR_DOMAIN_XML_UPDATE_CPU flag:
<cpu mode='host-passthrough' match='minimal'>
<model>Penryn</model> --+ copied from caps
<vendor>Intel</vendor> | XML but doesn't
<topology sockets='2' cores='4' threads='1'/> | describe all
<feature policy='require' name='dca'/> | aspects of the
<feature policy='require' name='xtpr'/> | actual guest CPU
... --+
</cpu>
In case a hypervisor doesn't support the exact CPU model requested by a
domain XML, we automatically fallback to a closest CPU model the
hypervisor supports (and make sure we add/remove any additional features
if needed). This patch adds 'fallback' attribute to model element, which
can be used to disable this automatic fallback.
We support <interface> of type "mcast", "server", and "client",
but the RNG schema for them are missed. Attribute "address" is
optional for "server" type. And these 3 types support
<mac address='MAC'/>, too.
Though <alias> is ignored when defining a domain, it can cause
failure if one validates (e.g. virt-xml-validate) the XML dumped
from a running domain. This patch expose it in domain RNG schema
for all the devices which support it.
The "unit" attribute of a drive address is optional in the code, so should
also be in the XML schema.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
KVM will be able to use a PCI SCSI controller even on POWER. Let
the user specify the vSCSI controller by other means than a default.
After this patch, the QEMU driver will actually look at the model
and reject anything but auto, lsilogic and ibmvscsi.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new introduced optional attribute "copy_on_read</code> controls
whether to copy read backing file into the image file. The value can
be either "on" or "off". Copy-on-read avoids accessing the same backing
file sectors repeatedly and is useful when the backing file is over a
slow network. By default copy-on-read is off.
This patch introduces the capability to use a different iterator per
variable.
The currently supported notation of variables in a filtering rule like
<rule action='accept' direction='out'>
<tcp srcipaddr='$A' srcportstart='$B'/>
</rule>
processes the two lists 'A' and 'B' in parallel. This means that A and B
must have the same number of 'N' elements and that 'N' rules will be
instantiated (assuming all tuples from A and B are unique).
In this patch we now introduce the assignment of variables to different
iterators. Therefore a rule like
<rule action='accept' direction='out'>
<tcp srcipaddr='$A[@1]' srcportstart='$B[@2]'/>
</rule>
will now create every combination of elements in A with elements in B since
A has been assigned to an iterator with Id '1' and B has been assigned to an
iterator with Id '2', thus processing their value independently.
The first rule has an equivalent notation of
<rule action='accept' direction='out'>
<tcp srcipaddr='$A[@0]' srcportstart='$B[@0]'/>
</rule>
In the past, generic SCSI commands issued from a guest to a virtio
disk were always passed through to the underlying disk by qemu, and
the kernel would also pass them on.
As a result of CVE-2011-4127 (see:
http://seclists.org/oss-sec/2011/q4/536), qemu now honors its
scsi=on|off device option for virtio-blk-pci (which enables/disables
passthrough of generic SCSI commands), and the kernel will only allow
the commands for physical devices (not for partitions or logical
volumes). The default behavior of qemu is still to allow sending
generic SCSI commands to physical disks that are presented to a guest
as virtio-blk-pci devices, but libvirt prefers to disable those
commands in the standard virtio block devices, enabling it only when
specifically requested (hopefully indicating that the requester
understands what they're asking for). For this purpose, a new libvirt
disk device type (device='lun') has been created.
device='lun' is identical to the default device='disk', except that:
1) It is only allowed if bus='virtio', type='block', and the qemu
version is "new enough" to support it ("new enough" == qemu 0.11 or
better), otherwise the domain will fail to start and a
CONFIG_UNSUPPORTED error will be logged).
2) The option "scsi=on" will be added to the -device arg to allow
SG_IO commands (if device !='lun', "scsi=off" will be added to the
-device arg so that SG_IO commands are specifically forbidden).
Guests which continue to use disk device='disk' (the default) will no
longer be able to use SG_IO commands on the disk; those that have
their disk device changed to device='lun' will still be able to use SG_IO
commands.
*docs/formatdomain.html.in - document the new device attribute value.
*docs/schemas/domaincommon.rng - allow it in the RNG
*tests/* - update the args of several existing tests to add scsi=off, and
add one new test that will test scsi=on.
*src/conf/domain_conf.c - update domain XML parser and formatter
*src/qemu/qemu_(command|driver|hotplug).c - treat
VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to
VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above.
Note that no support for this new device value was added to any
hypervisor drivers other than qemu, because it's unclear what it might
mean (if anything) to those drivers.
Hi,
this is the fifth version of my SRV record for DNSMasq patch rebased
for the current codebase to the bridge driver and libvirt XML file to
include support for the SRV records in the DNS. The syntax is based on
DNSMasq man page and tests for both xml2xml and xml2argv were added as
well. There are some things written a better way in comparison with
version 4, mainly there's no hack in tests/networkxml2argvtest.c and
also the xPath context is changed to use a simpler query using the
virXPathInt() function relative to the current node.
Also, the patch is also fixing the networkxml2argv test to pass both
checks, i.e. both unit tests and also syntax check.
Please review,
Michal
Signed-off-by: Michal Novotny <minovotn@redhat.com>
When doing security relabeling, there are cases where a per-file
override might be appropriate. For example, with a static label
and relabeling, it might be appropriate to skip relabeling on a
particular disk, where the backing file lives on NFS that lacks
the ability to track labeling. Or with dynamic labeling, it might
be appropriate to use a custom (non-dynamic) label for a disk
specifically intended to be shared across domains.
The new XML resembles the top-level <seclabel>, but with fewer
options (basically relabel='no', or <label>text</label>):
<domain ...>
...
<devices>
<disk type='file' device='disk'>
<source file='/path/to/image1'>
<seclabel relabel='no'/> <!-- override for just this disk -->
</source>
...
</disk>
<disk type='file' device='disk'>
<source file='/path/to/image1'>
<seclabel relabel='yes'> <!-- override for just this disk -->
<label>system_u:object_r:shared_content_t:s0</label>
</seclabel>
</source>
...
</disk>
...
</devices>
<seclabel type='dynamic' model='selinux'>
<baselabel>text</baselabel> <!-- used for all devices without override -->
</seclabel>
</domain>
This patch only introduces the XML and documentation; future patches
will actually parse and make use of it. The intent is that we can
further extend things as needed, adding a per-device <seclabel> in
more places (such as the source of a console device), and possibly
allowing a <baselabel> instead of <label> for labeling where we want
to reuse the cNNN,cNNN pair of a dynamically labeled domain but a
different base label.
First suggested by Daniel P. Berrange here:
https://www.redhat.com/archives/libvir-list/2011-December/msg00258.html
* docs/schemas/domaincommon.rng (devSeclabel): New define.
(disk): Use it.
* docs/formatdomain.html.in (elementsDisks, seclabel): Document
the new XML.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-dynamic-override.xml:
New test, to validate RNG.
The RNG for <seclabel> was too strict - if it was present, then it
had to have sub-elements, even if those didn't make sense for the
given attributes. Also, we didn't have any tests of <seclabel>
parsing or XML output.
In this patch, I added more parsing tests than output tests (since
the output populates and/or reorders fields not present in certain
inputs). Making the RNG reliable is a precursor to using <seclabel>
variants in more places in the XML in later patches.
See also:
http://berrange.com/posts/2011/09/29/two-small-improvements-to-svirt-guest-configuration-flexibility-with-kvmlibvirt/
* docs/schemas/domaincommon.rng (seclabel): Tighten rules.
* tests/qemuxml2argvtest.c (mymain): New tests.
* tests/qemuxml2xmltest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-*.*: New files.
Original patch by Bharata. Updated to use {1,16} in spaprvioReg based
on example from Eric Blake.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
In QEMU PPC64 we have a network device called "spapr-vlan". We can specify
this using the existing syntax for network devices, however libvirt
currently rejects "spapr-vlan" in virDomainNetDefParseXML() because of
the "-". Fix the code to accept "-".
* src/conf/domain_conf.c (virDomainNetDefParseXML): Allow '-' in
model name, and be more efficient.
* docs/schemas/domaincommon.rng: Limit valid model names to match code.
Based on a patch by Michael Ellerman.
ppc64 as new arch type and pseries as new machine type are
added under <os> ... </os>.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
This patch is to expose the fabric_name of fc_host class, which
might be useful for users who wants to known which fabric the
(v)HBA connects to.
The patch also adds the missed capabilities' XML schema of scsi_host,
(of course, with fabric_wwn added), and update the documents
(docs/formatnode.html.in)
Enable block I/O throttle for per-disk in XML, as the first
per-disk IO tuning parameter.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The capabilities XML uses the x86 specific terms 'S3', 'S4'
and 'Hybrid-Syspend'. Switch it to use the same terminology
as the API constants and virsh options, eg 'suspend_mem'
'suspend_disk' and 'suspend_hybrid'
* docs/formatcaps.html.in, docs/schemas/capability.rng,
src/conf/capabilities.c: Rename suspend constants
This adds per-device weights to <blkiotune>. Note that the
cgroups implementation only supports weights per block device,
and not per-file within the device; hence this option must be
global to the domain definition rather than tied to individual
<devices>/<disk> entries:
<domain ...>
<blkiotune>
<device>
<path>/path/to/block</path>
<weight>1000</weight>
</device>
</blkiotune>
..
This patch also adds a parameter --device-weights to virsh command
blkiotune for setting/getting blkiotune.weight_device for any
hypervisor that supports it. All <device> entries under
<blkiotune> are concatenated into a single string attribute under
virDomain{Get,Set}BlkioParameters, named "device_weight".
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Some systems support a feature known as 'Hybrid-Suspend', apart from the
usual system-wide sleep states such as Suspend-to-RAM (S3) or Suspend-to-Disk
(S4). Add the functionality to discover this power management feature and
export it in the capabilities XML under the <power_management> tag.
virt-xml-validate fails when run on a domain XML file of type 'vbox'.
For failing test case, see https://bugzilla.redhat.com/show_bug.cgi?id=757097
This patch updates the XML schema to accept all valid hypervisor
types, as well as dropping hypervisor types that are not in use
by the current code base.
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch adds support for filtering of STP (spanning tree protocol) traffic
to the parser and makes us of the ebtables support for STP filtering. This code
now enables the filtering of traffic in chains with prefix 'stp'.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
With hunks borrowed from one of David Steven's previous patches, we now
add the capability of having a 'mac' chain which is useful to filter
for multiple valid MAC addresses.
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This patch exports KVM Host Power Management capabilities as XML so that
higher-level systems management software can make use of these features
available in the host.
The script "pm-is-supported" (from pm-utils package) is run to discover if
Suspend-to-RAM (S3) or Suspend-to-Disk (S4) is supported by the host.
If either of them are supported, then a new tag "<power_management>" is
introduced in the XML under the <host> tag.
However in case the query to check for power management features succeeded,
but the host does not support any such feature, then the XML will contain
an empty <power_management/> tag. In the event that the PM query itself
failed, the XML will not contain any "power_management" tag.
To use this, new APIs could be implemented in libvirt to exploit power
management features such as S3/S4.
This patch adds support for filtering of VLAN (802.1Q) traffic to the
parser and makes us of the ebtables support for VLAN filtering. This code
now enables the filtering of traffic in chains with prefix 'vlan'.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This patch modifies the NWFilter parameter parser to support multiple
elements with the same name and to internally build a list of items.
An example of the XML looks like this:
<parameter name='TEST' value='10.1.2.3'/>
<parameter name='TEST' value='10.2.3.4'/>
<parameter name='TEST' value='10.1.1.1'/>
The list of values is then stored in the newly introduced data type
virNWFilterVarValue.
The XML formatter is also adapted to print out all items in alphabetical
order sorted by 'name'.
This patch also fixes a bug in the XML schema on the way.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This patch enables chains that have a known prefix in their name.
Known prefixes are: 'ipv4', 'ipv6', 'arp', 'rarp'. All prefixes
are also protocols that can be evaluated on the ebtables level.
Following the prefix they will be automatically connected to an interface's
'root' chain and jumped into following the protocol they evaluate, i.e.,
a table 'arp-xyz' will be accessed from the root table using
ebtables -t nat -A <iface root table> -p arp -j I-<ifname>-arp-xyz
thus generating a 'root' chain like this one here:
Bridge chain: libvirt-O-vnet0, entries: 5, policy: ACCEPT
-p IPv4 -j O-vnet0-ipv4
-p ARP -j O-vnet0-arp
-p 0x8035 -j O-vnet0-rarp
-p ARP -j O-vnet0-arp-xyz
-j DROP
where the chain 'arp-xyz' is accessed for filtering of ARP packets.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This patch extends the filter XML to support priorities of chains
in the XML. An example would be:
<filter name='allow-arpxyz' chain='arp-xyz' priority='200'>
[...]
</filter>
The permitted values for priorities are [-1000, 1000].
By setting the priority of a chain the order in which it is accessed
from the interface root chain can be influenced.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This patch adds XML definitions for guest NUMA specification and contains
routines to parse the same. The guest NUMA specification looks like this:
<cpu>
...
<topology sockets='2' cores='4' threads='2'/>
<numa>
<cell cpus='0-7' memory='512000'/>
<cell cpus='8-15' memory='512000'/>
</numa>
...
</cpu>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
The types used in domaincommon.rng and secret.rng should be the same.
Move genericName to basictypes.rng, then drop redundant types now
that secret.rng uses basictypes.rng.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add additional fields to let you specify the how to authenticate with a disk.
The secret to use may be referenced by a usage string or a UUID, i.e.:
<auth username='myuser'>
<secret type='ceph' usage='secretname'/>
</auth>
or
<auth username='myuser'>
<secret type='ceph' uuid='0a81f5b2-8403-7b23-c8d6-21ccc2f80d6f'/>
</auth>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Add a new secret type to store a Ceph authentication key. The name
is simply an identifier for easy human reference.
The xml looks like this:
<secret ephemeral='no' private='no'>
<uuid>0a81f5b2-8403-7b23-c8d6-21ccc2f80d6f</uuid>
<usage type='ceph'>
<name>mycluster_admin</name>
</usage>
</secret>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.net>
This attribute says what to do with cdrom (or floppy) if
the source is missing. It accepts:
- mandatory - fail if missing for any reason (the default)
- requisite - fail if missing on boot up, drop if missing on
migrate/restore/revert
- optional - drop if missing at any start attempt.
However, this patch introduces only XML part of this new
functionality.
VirtFS allows the user to choose between path/handle based fs driver.
As of now, libvirt hardcoded path based driver only. This patch provides
a solution to allow user to choose between path/handle based fs driver.
Sample:
<filesystem type='mount'>
<driver type='handle'/>
<source dir='/folder/to/share1'/>
<target dir='mount_tag1'/>
</filesystem>
<filesystem type='mount'>
<driver type='path'/>
<source dir='/folder/to/share2'/>
<target dir='mount_tag2'/>
</filesystem>
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Previously libvirt's disk device XML only had a single attribute,
error_policy, to control both read and write error policy, but qemu
has separate options for controlling read and write. In one case
(enospc) a policy is allowed for write errors but not read errors.
This patch adds a separate attribute that sets only the read error
policy. If just error_policy is set, it will apply to both read and
write error policy (previous behavior), but if the new rerror_policy
attribute is set, it will override error_policy for read errors only.
Possible values for rerror_policy are "stop", "report", and "ignore"
("report" is the qemu-controlled default for rerror_policy when
error_policy isn't specified).
For consistency, the value "report" has been added to the possible
values for error_policy as well.
When support for was added for PCI multifunction cards (in commit
9f8baf, first included in libvirt 0.9.3), it was done by always
turning on the multifunction bit for all PCI devices. Since that time
it has been realized that this is not an ideal solution, and that the
multifunction bit must be selectively turned on. For example, see
https://bugzilla.redhat.com/show_bug.cgi?id=728174
and the discussion before and after
https://www.redhat.com/archives/libvir-list/2011-September/msg01036.html
This patch modifies multifunction support so that the multifunction=on
option is only added to the qemu commandline for a device if its PCI
<address> definition has the attribute "multifunction='on'", e.g.:
<address type='pci' domain='0x0000' bus='0x00'
slot='0x04' function='0x0' multifunction='on'/>
In practice, the multifunction bit should only be turned on if
function='0' AND other functions will be used in the same slot - it
usually isn't needed for functions 1-7 (although there are apparently
some exceptions, e.g. the Intel X53 according to the QEMU source
code), and should never be set if only function 0 will be used in the
slot. The test cases have been changed accordingly to illustrate.
With this patch in place, if a user attempts to assign multiple
functions in a slot without setting the multifunction bit for function
0, libvirt will issue an error when the domain is defined, and the
define operation will fail. In the future, we may decide to detect
this situation and automatically add multifunction=on to avoid the
error; even then it will still be useful to have a manual method of
turning on multifunction since, as stated above, there are some
devices that excpect it to be turned on for all functions in a slot.
A side effect of this patch is that attempts to use the same PCI
address for two different devices will now log an error (previously
this would cause the domain define operation to fail, but there would
be no log message generated). Because the function doing this log was
almost completely rewritten, I didn't think it worthwhile to make a
separate patch for that fix (the entire patch would immediately be
obsoleted).
This patch was made in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=738095
In short, qemu's default for the rombar setting (which makes the
firmware ROM of a PCI device visible/not on the guest) was previously
0 (not visible), but they recently changed the default to 1
(visible). Unfortunately, there are some PCI devices that fail in the
guest when rombar is 1, so the setting must be exposed in libvirt to
prevent a regression in behavior (it will still require explicitly
setting <rom bar='off'/> in the guest XML).
rombar is forced on/off by adding:
<rom bar='on|off'/>
inside a <hostdev> element that defines a PCI device. It is currently
ignored for all other types of devices.
At the moment there is no clean method to determine whether or not the
rombar option is supported by QEMU - this patch uses the advice of a
QEMU developer to assume support for qemu-0.12+. There is currently a
patch in the works to put this information in the output of "qemu-kvm
-device pci-assign,?", but of course if we switch to keying off that,
we would lose support for setting rombar on all the versions of qemu
between 0.12 and whatever version gets that patch.
QEMU 0.13 introduced cache=unsafe for -drive, this patch exposes
it in the libvirt layer.
* Introduced a new QEMU capability flag ($prefix_CACHE_UNSAFE),
as even if $prefix_CACHE_V2 is set, we can't know if unsafe
is supported.
* Improved the reliability of qemu cache type detection.
A new element is introduced to XML that allows to control
state of virtual network interfaces in hypervisors.
Live modification of the link state allows networking tools
propagate topology changes to guest OS or testing of
scenarios in complex (virtual) networks.
This patch adds elements to XML grammars and parsing and generating
code.
It is important to be able to attach USB redirected devices to a
particular controller (one that supports USB2 for instance).
Without this patch, only the default bus was used.
<redirdev bus='usb' type='spicevmc'>
<address type='usb' bus='0' port='4'/>
</redirdev>
I got confused when 'virsh domblkinfo dom disk' required the
path to a disk (which can be ambiguous, since a single file
can back multiple disks), rather than the unambiguous target
device name that I was using in disk snapshots. So, in true
developer fashion, I went for the best of both worlds - all
interfaces that operate on a disk (aka block) now accept
either the target name or the unambiguous path to the backing
file used by the disk.
* src/conf/domain_conf.h (virDomainDiskIndexByName): Add
parameter.
(virDomainDiskPathByName): New prototype.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/conf/domain_conf.c (virDomainDiskIndexByName): Also allow
searching by path, and decide whether ambiguity is okay.
(virDomainDiskPathByName): New function.
(virDomainDiskRemoveByName, virDomainSnapshotAlignDisks): Update
callers.
* src/qemu/qemu_driver.c (qemudDomainBlockPeek)
(qemuDomainAttachDeviceConfig, qemuDomainUpdateDeviceConfig)
(qemuDomainGetBlockInfo, qemuDiskPathToAlias): Likewise.
* src/qemu/qemu_process.c (qemuProcessFindDomainDiskByPath):
Likewise.
* src/libxl/libxl_driver.c (libxlDomainAttachDeviceDiskLive)
(libxlDomainDetachDeviceDiskLive, libxlDomainAttachDeviceConfig)
(libxlDomainUpdateDeviceConfig): Likewise.
* src/uml/uml_driver.c (umlDomainBlockPeek): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainBlockPeek): Likewise.
* docs/formatsnapshot.html.in: Update documentation.
* tools/virsh.pod (domblkstat, domblkinfo): Likewise.
* docs/schemas/domaincommon.rng (diskTarget): Tighten pattern on
disk targets.
* docs/schemas/domainsnapshot.rng (disksnapshot): Update to match.
* tests/domainsnapshotxml2xmlin/disk_snapshot.xml: Update test.
Adds an optional element to <domainsnapshot>, which will be used
to give user control over external snapshot filenames on input,
and specify generated filenames on output.
For now, no driver accepts this element; that will come later.
<domainsnapshot>
...
<disks>
<disk name='vda' snapshot='no'/>
<disk name='vdb' snapshot='internal'/>
<disk name='vdc' snapshot='external'>
<driver type='qcow2'/>
<source file='/path/to/new'/>
</disk>
</disks>
<domain>
...
<devices>
<disk ...>
<driver name='qemu' type='raw'/>
<target dev='vdc'/>
<source file='/path/to/old'/>
</disk>
</devices>
</domain>
</domainsnapshot>
* src/conf/domain_conf.h (_virDomainSnapshotDiskDef): New type.
(_virDomainSnapshotDef): Add new elements.
(virDomainSnapshotAlignDisks): New prototype.
* src/conf/domain_conf.c (virDomainSnapshotDiskDefClear)
(virDomainSnapshotDiskDefParseXML, disksorter)
(virDomainSnapshotAlignDisks): New functions.
(virDomainSnapshotDefParseString): Parse new fields.
(virDomainSnapshotDefFree): Clean them up.
(virDomainSnapshotDefFormat): Output them.
* src/libvirt_private.syms (domain_conf.h): Export new function.
* docs/schemas/domainsnapshot.rng (domainsnapshot, disksnapshot):
Add more xml.
* docs/formatsnapshot.html.in: Document it.
* tests/domainsnapshotxml2xmlin/disk_snapshot.xml: New test.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: Update.
In order to distinguish disk snapshots from system checkpoints, a
new state value that is only valid for snapshots is helpful.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_LAST): New placeholder.
* src/conf/domain_conf.h (virDomainSnapshotState): New enum mapping.
(VIR_DOMAIN_DISK_SNAPSHOT): New internal enum value.
* src/conf/domain_conf.c (virDomainState): Use placeholder.
(virDomainSnapshotState): Extend mapping by one for use in snapshot.
(virDomainSnapshotDefParseString, virDomainSnapshotDefFormat):
Handle new state.
(virDomainObjSetState, virDomainStateReasonToString)
(virDomainStateReasonFromString): Avoid compiler warnings.
* tools/virsh.c (vshDomainState, vshDomainStateReasonToString):
Likewise.
* src/libvirt_private.syms (domain_conf.h): Export new functions.
* docs/schemas/domainsnapshot.rng: Tighten state definition.
* docs/formatsnapshot.html.in: Document it.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: New test.
As discussed here:
https://www.redhat.com/archives/libvir-list/2011-August/msg00361.htmlhttps://www.redhat.com/archives/libvir-list/2011-August/msg00552.html
Adds snapshot attribute and transient sub-element:
<devices>
<disk type=... snapshot='no|internal|external'>
...
<transient/>
</disk>
</devices>
* docs/schemas/domaincommon.rng (snapshot): New define.
(disk): Add snapshot and persistent attributes.
* docs/formatdomain.html.in: Document them.
* src/conf/domain_conf.h (virDomainDiskSnapshot): New enum.
(_virDomainDiskDef): New fields.
* tests/qemuxml2argvdata/qemuxml2argv-disk-transient.xml: New
test of rng, no args counterpart until qemu support is complete.
* tests/qemuxml2argvdata/qemuxml2argv-disk-snapshot.args: New
file, snapshot attribute does not affect args.
* tests/qemuxml2argvdata/qemuxml2argv-disk-snapshot.xml: Likewise.
* tests/qemuxml2argvtest.c (mymain): Run new test.
This patch will probably cause merge conflicts to those trying
to do backports. The end goal is simple - domaincommon.rng
should be the state of domain.rng pre-patch, with a few lines
tweaked in the header, while domain.rng post-patch is now just
a shell that includes domaincommon.rng and sets the <start>.
* docs/schemas/domain.rng: Move guts...
* docs/schemas/domaincommon.rng: ...to new file.
* docs/schemas/domainsnapshot.rng: Allow new xml.
* docs/schemas/Makefile.am (schema_DATA): Distribute new file.
* tests/domainsnapshotxml2xmlout/full_domain.xml: New test.
* libvirt.spec.in (%files client): Ship new file. Sort lines.
* mingw32-libvirt.spec.in: Likewise.
So that devices can be attached to hubs. Example, to attach to first
port of a usb-hub on port 1.
<hub type='usb'>
<address type='usb' bus='0' port='1'/>
</hub>
<input type='mouse' type='usb'>
<address type='usb' bus='0' port='1.1'/>
</hub>
also add a test entry
Newer QEMU introduced cache=directsync for -drive, this patchset
is to expose it in libvirt layer.
* Introduced a new QEMU capability flag ($prefix_CACHE_DIRECTSYNC),
As even $prefix_CACHE_V2 is set, we can't known if directsync
is supported.
Audit all changes to the qemu vm->current_snapshot, and make them
update the saved xml file for both the previous and the new
snapshot, so that there is always at most one snapshot with
<active>1</active> in the xml, and that snapshot is used as the
current snapshot even across libvirtd restarts.
This patch does not fix the case of virDomainSnapshotDelete(,CHILDREN)
where one of the children is the current snapshot; that will be later.
* src/conf/domain_conf.h (_virDomainSnapshotDef): Alter member
type and name.
* src/conf/domain_conf.c (virDomainSnapshotDefParseString)
(virDomainSnapshotDefFormat): Update clients.
* docs/schemas/domainsnapshot.rng: Tighten rng.
* src/qemu/qemu_driver.c (qemuDomainSnapshotLoad): Reload current
snapshot.
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainSnapshotDiscard): Track current snapshot.
In some versions of qemu, both virtio-blk-pci and virtio-net-pci
devices can have an event_idx setting that determines some details of
event processing. When it is enabled, it "reduces the number of
interrupts and exits for the guest". qemu will automatically enable
this feature when it is available, but there may be cases where this
new feature could actually make performance worse (NB: no such case
has been found so far).
As a safety switch in case such a situation is encountered in the
field, this patch adds a new attribute "event_idx" to the <driver>
element of both disk and interface devices. event_idx can be set to
"on" (to force event_idx on in case qemu has it disabled by default)
or "off" (for force event_idx off). In the case that event_idx support
isn't present in qemu, the attribute is ignored (this on the advice of
the qemu developer).
docs/formatdomain.html.in: document the new flag (marking it as
"don't mess with this!"
docs/schemas/domain.rng: add event_idx in appropriate places
src/conf/domain_conf.[ch]: add event_idx to parser and formatter
src/libvirt_private.syms: export
virDomainVirtioEventIdx(From|To)String
src/qemu/qemu_capabilities.[ch]: detect and report event_idx in
disk/net
src/qemu/qemu_command.c: add event_idx parameter to qemu commandline
when appropriate.
tests/qemuxml2argvdata/qemuxml2argv-event_idx.args,
tests/qemuxml2argvdata/qemuxml2argv-event_idx.xml,
tests/qemuxml2argvtest.c,
tests/qemuxml2xmltest.c: test cases for event_idx.
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.
* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
Once it's plugged in, the <listen> element will be an optional
replacement for the "listen" attribute that graphics elements already
have. If the <listen> element is type='address', it will have an
attribute called 'address' which will contain an IP address or dns
name that the guest's display server should listen on. If, however,
type='network', the <listen> element should have an attribute called
'network' that will be set to the name of a network configuration to
get the IP address from.
* docs/schemas/domain.rng: updated to allow the <listen> element
* docs/formatdomain.html.in: document the <listen> element and its
attributes.
* src/conf/domain_conf.[hc]:
1) The domain parser, formatter, and data structure are modified to
support 0 or more <listen> subelements to each <graphics>
element. The old style "legacy" listen attribute is also still
accepted, and will be stored internally just as if it were a
separate <listen> element. On output (i.e. format), the address
attribute of the first <listen> element of type 'address' will be
duplicated in the legacy "listen" attribute of the <graphic>
element.
2) The "listenAddr" attribute has been removed from the unions in
virDomainGRaphicsDef for graphics types vnc, rdp, and spice.
This attribute is now in the <listen> subelement (aka
virDomainGraphicsListenDef)
3) Helper functions were written to provide simple access
(both Get and Set) to the listen elements and their attributes.
* src/libvirt_private.syms: export the listen helper functions
* src/qemu/qemu_command.c, src/qemu/qemu_hotplug.c,
src/qemu/qemu_migration.c, src/vbox/vbox_tmpl.c,
src/vmx/vmx.c, src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c
Modify all these files to use the listen helper functions rather
than directly referencing the (now missing) listenAddr
attribute. There can be multiple <listen> elements to a single
<graphics>, but the drivers all currently only support one, so all
replacements of direct access with a helper function indicate index
"0".
* tests/* - only 3 of these are new files added explicitly to test the
new <listen> element. All the others have been modified to reflect
the fact that any legacy "listen" attributes passed in to the domain
parse will be saved in a <listen> element (i.e. one of the
virDomainGraphicsListenDefs), and during the domain format function,
both the <listen> element as well as the legacy attributes will be
output.
Define new 'bandwidth' element with possible child element 'inbound'
and 'outbound' addressing incoming and outgoing traffic respectively:
<bandwidth>
<inbound average='1000' peak='2000' burst='5120'/>
<outbound average='500'/>
</bandwidth>
Leaving any element out means not to shape traffic in that
direction.
The units for average and peak (rate) are in kilobytes per second,
for burst (size) are just in kilobytes.
This element can be inserted into domain's 'interface' and
'network'.
The network XML is updated in the following ways:
1) The <forward> element can now contain a list of forward interfaces:
<forward .... >
<interface dev='eth10'/>
<interface dev='eth11'/>
<interface dev='eth12'/>
<interface dev='eth13'/>
</forward>
The first of these takes the place of the dev attribute that is
normally in <forward> - when defining a network you can specify
either one, and on output both will be present. If you specify
both on input, they must match.
2) In addition to forward modes of 'nat' and 'route', these new modes
are supported:
private, passthrough, vepa - when this network is referenced by a
domain's interface, it will have the same effect as if the
interface had been defined as type='direct', e.g.:
<interface type='direct'>
<source mode='${mode}' dev='${dev}>
...
</interface>
where ${mode} is one of the three new modes, and ${dev} is an interface
selected from the list given in <forward>.
bridge - if a <forward> dev (or multiple devs) is defined, and
forward mode is 'bridge' this is just like the modes 'private',
'passthrough', and 'vepa' above. If there is no forward dev
specified but a bridge name is given (e.g. "<bridge
name='br0'/>"), then guest interfaces using this network will use
libvirt's "host bridge" mode, equivalent to this:
<interface type='bridge'>
<source bridge='${bridge-name}'/>
...
</interface>
3) A network can have multiple <portgroup> elements, which may be
selected by the guest interface definition (by adding
"portgroup='${name}'" in the <source> element along with the
network name). Currently a portgroup can only contain a
virtportprofile, but the intent is that other configuration items
may be put there int the future (e.g. bandwidth config). When
building a guest's interface, if the <interface> XML itself has no
virtportprofile, and if the requested network has a portgroup with
a name matching the name given in the <interface> (or if one of the
network's portgroups is marked with the "default='yes'" attribute),
the virtportprofile from that portgroup will be used by the
interface.
4) A network can have a virtportprofile defined at the top level,
which will be used by a guest interface when connecting in one of
the 'direct' modes if the guest interface XML itself hasn't
specified any virtportprofile, and if there are also no matching
portgroups on the network.
the domain XML <interface> element is updated in the following ways:
1) <virtualportprofile> can be specified when source type='network'
(previously it was only valid for source type='direct')
2) A new attribute "portgroup" has been added to the <source>
element. When source type='network' (the only time portgroup is
recognized), extra configuration information will be taken from the
<portgroup> element of the given name in the network definition.
3) Each virDomainNetDef now also potentially has a
virDomainActualNetDef which is a private object (never
exported/imported via the public API, and not defined in the RNG) that
is used to maintain information about the physical device that was
actually used for a NetDef of type VIR_DOMAIN_NET_TYPE_NETWORK.
The virDomainActualNetDef will only be parsed/formatted if the
parse/format function is called with the
VIR_DOMAIN_XML_INTERNAL_ACTUAL_NET flag set (which is only needed when
saving/loading a running domain's state info to the stateDir).
virtPortProfiles are currently only used in the domain XML, but will
soon also be used in the network XML. To prepare for that change, this
patch moves the structure definition into util/network.h and the parse
and format functions into util/network.c (I decided that this was a
better choice than macvtap.h/c for something that needed to always be
available on all platforms).
Kernel cmdline args can be passed to xen pv domains even when a
bootloader is specified. The current config-to-sxpr mapping
ignores cmdline when bootloader is present.
Since the xend sub-driver is used with many xen toolstack versions,
this patch takes conservative approach of adding an else block to
existing !def->os.bootloader, and only appends sxpr if def->os.cmdline
is non-NULL.
V2: Fix existing testcase broken by this patch and add new testcases
This patch creates new <bios> element which, at this time has only the
attribute useserial='yes|no'. This attribute allow users to use
Serial Graphics Adapter and see BIOS messages from the very first moment
domain boots up. Therefore, users can choose boot medium, set PXE, etc.
This option accepts 3 values:
-keep, to keep current client connected (Spice+VNC)
-disconnect, to disconnect client (Spice)
-fail, to fail setting password if there is a client connected (Spice)
Add libvirt support for MicroBlaze architecture as a QEMU target. Based on mips/mipsel pattern.
Signed-off-by: John Williams <john.williams@petalogix.com>
domain.rng, network.rng, and interface.rng already use a few of the
same types (or in some cases *should* but don't), and an upcoming code
change will have them sharing even more. To prepare for that, this
patch takes those common data type definitions and moves them into
basictypes.rng.
This may break some rule about the need to RNG files to be autonomous
or something, but I saw that storageencryption.rng is used in this
way, so I figured it must not be completely against the law...
Add a new attribute to the <seclabel> XML to allow resource
relabelling to be enabled with static label usage.
<seclabel model='selinux' type='static' relabel='yes'>
<label>system_u:system_r:svirt_t:s0:c392,c662</label>
</seclabel>
* docs/schemas/domain.rng: Add relabel attribute
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parse
the 'relabel' attribute
* src/qemu/qemu_process.c: Unconditionally clear out the
'imagelabel' attribute
* src/security/security_apparmor.c: Skip based on 'relabel'
attribute instead of label type
* src/security/security_selinux.c: Skip based on 'relabel'
attribute instead of label type and fill in <imagelabel>
attribute if relabel is enabled.
Normally the dynamic labelling mode will always use a base
label of 'svirt_t' for VMs. Introduce a <baselabel> field
in the <seclabel> XML to allow this base label to be changed
eg
<seclabel type='dynamic' model='selinux'>
<baselabel>system_u:object_r:virt_t:s0</baselabel>
</seclabel>
* docs/schemas/domain.rng: Add <baselabel>
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parsing
of base label
* src/qemu/qemu_process.c: Don't reset 'model' attribute if
a base label is specified
* src/security/security_apparmor.c: Refuse to support base label
* src/security/security_selinux.c: Use 'baselabel' when generating
label, if available
This commit introduces names definition for the DNS hosts file using
the following syntax:
<dns>
<host ip="192.168.1.1">
<name>alias1</name>
<name>alias2</name>
</host>
</dns>
Some of the improvements and fixes were done by Laine Stump so
I'm putting him into the SOB clause again ;-)
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Laine Stump <laine@laine.org>
This commit introduces the <dns> element and <txt> record for the
virtual DNS network. The DNS TXT record can be defined using following
syntax in the network XML file:
<dns>
<txt name="example" value="example value" />
</dns>
Also, the Relax-NG scheme has been altered to allow the texts without
spaces only for the name element and some nitpicks about memory
free'ing have been fixed by Laine so therefore I'm adding Laine to the
SOB clause ;-)
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Laine Stump <laine@laine.org>
For virtio disks and interfaces, qemu allows users to enable or disable
ioeventfd feature. This means, qemu can execute domain code, while
another thread waits for I/O event. Basically, in some cases it is win,
in some loss. This feature is available via 'ioeventfd' attribute in disk
and interface <driver> element. It accepts 'on' and 'off'. Leaving this
attribute out defaults to hypervisor decision.
From a security pov copy and paste between the guest and the client is not
always desirable. So we need to be able to enable/disable this. The best place
to do this from an administration pov is on the hypervisor, so the qemu cmdline
is getting a spice disable-copy-paste option, see bug 693645. Example qemu
invocation:
qemu -spice port=5932,disable-ticketing,disable-copy-paste
https://bugzilla.redhat.com/show_bug.cgi?id=693661
A lock manager may operate in various modes. The direct mode of
operation is to obtain locks based on the resources associated
with devices in the XML. The indirect mode is where the app
creating the domain provides explicit leases for each resource
that needs to be locked. This XML extension allows for listing
resources in the XML
<devices>
...
<lease>
<lockspace>somearea</lockspace>
<key>thequickbrownfoxjumpsoverthelazydog</key>
<target path='/some/lease/path' offset='23432'/>
</lease>
...
</devices>
The 'lockspace' is a unique identifier for the lockspace which
the lease is associated
The 'key' is a unique identifier for the resource associated
with the lease.
The 'target' is the file on disk where the leases are held.
* docs/schemas/domain.rng: Add lease schema
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and
formatting for leases
* tests/qemuxml2argvdata/qemuxml2argv-lease.args,
tests/qemuxml2argvdata/qemuxml2argv-lease.xml,
tests/qemuxml2xmltest.c: Test XML handling for leases
Since -vnc uses ':' to separate the address from the port, raw
IPv6 addresses need to be escaped like [addr]:port
* src/qemu/qemu_command.c: Escape raw IPv6 addresses with []
* tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml: Tweak
to test Ipv6 escaping
* docs/schemas/domain.rng: Allow Ipv6 addresses, or hostnames
in <graphics> listen attributes
This adds a streaming-video=filter|all|off attribute. It is used to change
the behavior of video stream detection in spice, the default is filter (the
default for libvirt is not to specify it - the actual default is defined in
libspice-server.so).
Usage:
<graphics type='spice' autoport='yes'>
<streaming mode='off'/>
</graphics>
Tested with the above and with tests/qemuxml2argvtest.
Signed-off-by: Alon Levy <alevy@redhat.com>
This patch enables filtering of gratuitous ARP packets using the following XML:
<rule action='accept' direction='in' priority='425'>
<arp gratuitous='true'/>
</rule>
starting with kernel 2.6.38 macvtap supports a 'passthru' mode for
attaching virtual functions of a SRIOV capable network card directly to a VM.
This patch adds the capability to configure such a device.
Signed-off-by: Dirk Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
This extends the SPICE XML to allow variable compression settings for audio,
images and streaming:
<graphics type='spice' port='5901' tlsPort='-1' autoport='yes'>
<image compression='auto_glz'/>
<jpeg compression='auto'/>
<zlib compression='auto'/>
<playback compression='on'/>
</graphics>
All new elements are optional.
This patch adds support for the evaluation of TCP flags in nwfilters.
It adds documentation to the web page and extends the tests as well.
Also, the nwfilter schema is extended.
The following are some example for rules using the tcp flags:
<rule action='accept' direction='in'>
<tcp state='NONE' flags='SYN/ALL' dsptportstart='80'/>
</rule>
<rule action='drop' direction='in'>
<tcp state='NONE' flags='SYN/ALL'/>
</rule>
<imagelable> is not generated by running domain, actually we parse
it in src/conf/domain_conf.c, this patch is to fix it, otherwise any
validation (virt-xml-validate) on the domain xml dumped from shutoff
domain containing <imagelable> will fail.
* docs/schemas/domain.rng
The Relax-NG schema for domains regarding <hostdev> doesn't match what's
implemented in src/conf/domain_conf.c#virDomainHostdevDefFormat(): The
implementation only requires @type, but the schema currently either
required none or all three attributes (@mode, @type, and @managed) to be
defined together, because they are declared in the same
<optional)-section. (@managed is currently even undocumented on
<http://libvirt.org/formatdomain.html#elementsUSB>).
Thus the following minimal <hostdev>-example fails to validate:
<domain type='test'>
<name>N</name>
<memory>4096</memory>
<bootloader>/bin/false</bootloader>
<os>
<type arch='x86_64' machine='xenpv'>linux</type>
</os>
<devices>
<hostdev type='pci'>
<source>
<address bus='0x06' slot='0x00' function='0x0'/>
</source>
</hostdev>
</devices>
</domain>
The schema is changed to match the current implementation:
1. @mode is optional (which defaults to 'subsystem')
2. @type is required
3. @managed is optional (which defaults to 'no')
The documentation is updated to mention @managed.
Signed-off-by: Philipp Hahn <hahn@univention.de>
This patch adds the possibility to not just drop packets, but to also have them rejected where iptables at least sends an ICMP msg back to the originator. On ebtables this again maps into dropping packets since rejecting is not supported.
I am adding 'since 0.8.9' to the docs assuming this will be the next version of libvirt.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=609463
The problem was that, since a bridge always acquires the MAC address
of the connected interface with the numerically lowest MAC, as guests
are started and stopped, it was possible for the MAC address to change
over time, and this change in the network was being detected by
Windows 7 (it sees the MAC of the default route change), so on each
reboot it would bring up a dialog box asking about this "new network".
The solution is to create a dummy tap interface with a MAC guaranteed
to be lower than any guest interface's MAC, and attach that tap to the
bridge as soon as it's created. Since all guest MAC addresses start
with 0xFE, we can just generate a MAC with the standard "0x52, 0x54,
0" prefix, and it's guaranteed to always win (physical interfaces are
never connected to these bridges, so we don't need to worry about
competing numerically with them).
Note that the dummy tap is never set to IFF_UP state - that's not
necessary in order for the bridge to take its MAC, and not setting it
to UP eliminates the clutter of having an (eg) "virbr0-nic" displayed
in the output of the ifconfig command.
I chose to not auto-generate the MAC address in the network XML
parser, as there are likely to be consumers of that API that don't
need or want to have a MAC address associated with the
bridge.
Instead, in bridge_driver.c when the network is being defined, if
there is no MAC, one is generated. To account for virtual network
configs that already exist when upgrading from an older version of
libvirt, I've added a %post script to the specfile that searches for
all network definitions in both the config directory
(/etc/libvirt/qemu/networks) and the state directory
(/var/lib/libvirt/network) that are missing a mac address, generates a
random address, and adds it to the config (and a matching address to
the state file, if there is one).
docs/formatnetwork.html.in: document <mac address.../>
docs/schemas/network.rng: add nac address to schema
libvirt.spec.in: %post script to update existing networks
src/conf/network_conf.[ch]: parse and format <mac address.../>
src/libvirt_private.syms: export a couple private symbols we need
src/network/bridge_driver.c:
auto-generate mac address when needed,
create dummy interface if mac address is present.
tests/networkxml2xmlin/isolated-network.xml
tests/networkxml2xmlin/routed-network.xml
tests/networkxml2xmlout/isolated-network.xml
tests/networkxml2xmlout/routed-network.xml: add mac address to some tests
This is in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=629662
Explanation
qemu's virtio-net-pci driver allows setting the algorithm used for tx
packets to either "bh" or "timer". This is done by adding ",tx=bh" or
",tx=timer" to the "-device virtio-net-pci" commandline option.
'bh' stands for 'bottom half'; when this is set, packet tx is all done
in an iothread in the bottom half of the driver. (In libvirt, this
option is called the more descriptive "iothread".)
'timer' means that tx work is done in qemu, and if there is more tx
data than can be sent at the present time, a timer is set before qemu
moves on to do other things; when the timer fires, another attempt is
made to send more data. (libvirt retains the name "timer" for this
option.)
The resulting difference, according to the qemu developer who added
the option is:
bh makes tx more asynchronous and reduces latency, but potentially
causes more processor bandwidth contention since the cpu doing the
tx isn't necessarily the cpu where the guest generated the
packets.
Solution
This patch provides a libvirt domain xml knob to change the option on
the qemu commandline, by adding a new attribute "txmode" to the
<driver> element that can be placed inside any <interface> element in
a domain definition. It's use would be something like this:
<interface ...>
...
<model type='virtio'/>
<driver txmode='iothread'/>
...
</interface>
I chose to put this setting as an attribute to <driver> rather than as
a sub-element to <tune> because it is specific to the virtio-net
driver, not something that is generally usable by all network drivers.
(note that this is the same placement as the "driver name=..."
attribute used to choose kernel vs. userland backend for the
virtio-net driver.)
Actually adding the tx=xxx option to the qemu commandline is only done
if the version of qemu being used advertises it in the output of
qemu -device virtio-net-pci,?
If a particular txmode is requested in the XML, and the option isn't
listed in that help output, an UNSUPPORTED_CONFIG error is logged, and
the domain fails to start.
Adds <smartcard mode='passthrough' type='spicevmc'/>, which uses the
new <channel name='smartcard'/> of <graphics type='spice'>.
* docs/schemas/domain.rng: Support new XML.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (virDomainGraphicsSpiceChannelName): New
enum value.
(virDomainChrSpicevmcName): New enum.
(virDomainChrSourceDef): Distinguish spicevmc types.
* src/conf/domain_conf.c (virDomainGraphicsSpiceChannelName): Add
smartcard.
(virDomainSmartcardDefParseXML): Parse it.
(virDomainChrDefParseXML, virDomainSmartcardDefParseXML): Set
spicevmc name.
(virDomainChrSpicevmc): New enum conversion functions.
* src/libvirt_private.syms: Export new functions.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr): Conditionalize
name.
* tests/qemuxml2argvtest.c (domain): New test.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-spicevmc.args:
New file.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-spicevmc.xml:
Likewise.
Inspired by https://bugzilla.redhat.com/show_bug.cgi?id=615757
Add a new character device backend for virtio serial channels that
activates the QEMU spice agent on the main channel using the vdagent
spicevmc connection. The <target> must be type='virtio', and supports
an optional name that specifies how the guest will see the channel
(for now, name must be com.redhat.spice.0).
<channel type='spicevmc'>
<target type='virtio'/>
<address type='virtio-serial' controller='1' bus='0' port='3'/>
</channel>
* docs/schemas/domain.rng: Support new XML.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (virDomainChrType): New enum value.
* src/conf/domain_conf.c (virDomainChr): Add spicevmc.
(virDomainChrDefParseXML, virDomainChrSourceDefParseXML)
(virDomainChrDefParseTargetXML): Parse and enforce proper use.
(virDomainChrSourceDefFormat, virDomainChrDefFormat): Format.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr)
(qemuBuildCommandLine): Add qemu support.
* tests/qemuxml2argvtest.c (domain): New test.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc.xml: New
file.
* tests/qemuxml2argvdata/qemuxml2argv-channel-spicevmc.args:
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Assuming a hypervisor that supports multiple smartcard devices in the
guest, this would be a valid XML description:
<devices>
<smartcard mode='host'/>
<smartcard mode='host-certificates'>
<certificate>/path/to/cert1</certificate>
<certificate>/path/to/cert2</certificate>
<certificate>/path/to/cert3</certificate>
</smartcard>
<smartcard mode='passthrough' type='tcp'>
<source mode='bind' host='127.0.0.1' service='2001'/>
<protocol type='raw'/>
</smartcard>
</devices>
(As of this commit, the qemu hypervisor will be the first
implementation, but it only supports one smartcard.)
* docs/formatdomain.html.in (Smartcard devices): New section.
* docs/schemas/domain.rng (smartcard): New define, used in
devices.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host.xml: New file
to test schema.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host-certificates.xml:
Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-passthrough-tcp.xml:
Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-controller.xml:
Likewise.
In QEMU, the card itself is a PCI device, but it requires a codec
(either -device hda-output or -device hda-duplex) to actually output
sound. Specifying <sound model='ich6'/> gives us -device intel-hda
-device hda-duplex I think it's important that a simple <sound model='ich6'/>
sets up a useful codec, to have consistent behavior with all other sound cards.
This is basically Dan's proposal of
<sound model='ich6'>
<codec type='output' slot='0'/>
<codec type='duplex' slot='3'/>
</sound>
without the codec bits implemented.
The important thing is to keep a consistent API here, we don't want some
<sound> devs require tweaking codecs but not others. Steps I see to
accomplishing this:
- every <sound> device has a <codec type='default'/> (unless codecs are
manually specified)
- <codec type='none'/> is required to specify 'no codecs'
- new audio settings like mic=on|off could then be exposed in
<sound> or <codec> in a consistent manner for all sound models
v2:
Use model='ich6'
v3:
Use feature detection, from eblake
Set codec id, bus, and cad values
v4:
intel-hda isn't supported if -device isn't available
v5:
Comment spelling fixes
QEMU supports serving VNC over a unix domain socket rather than traditional
TCP host/port. This is specified with:
<graphics type='vnc' socket='/foo/bar/baz'/>
This provides better security access control than VNC listening on
127.0.0.1, but will cause issues with tools that rely on the lax security
(virt-manager in fedora runs as regular user by default, and wouldn't be
able to access a socket owned by 'qemu' or 'root').
Also not currently supported by any clients, though I have patches for
virt-manager, and virt-viewer should be simple to update.
v2:
schema: Make listen vs. socket a <choice>
Currently, boot order can be specified per device class but there is no
way to specify exact disk/NIC device to boot from.
This patch adds <boot order='N'/> element which can be used inside
<disk/> and <interface/>. This is incompatible with the older os/boot
element. Since not all hypervisors support per-device boot
specification, new deviceboot flag is included in capabilities XML for
hypervisors which understand the new boot element. Presence of the flag
allows (but doesn't require) users to use the new style boot order
specification.
This is in response to a request in:
https://bugzilla.redhat.com/show_bug.cgi?id=665293
In short, under heavy load, it's possible for qemu's networking to
lock up due to the tap device's default 1MB sndbuf being
inadequate. adding "sndbuf=0" to the qemu commandline -netdevice
option will alleviate this problem (sndbuf=0 actually sets it to
0xffffffff).
Because we must be able to explicitly specify "0" as a value, the
standard practice of "0 means not specified" won't work here. Instead,
virDomainNetDef also has a sndbuf_specified, which defaults to 0, but
is set to 1 if some value was given.
The sndbuf value is put inside a <tune> element of each <interface> in
the domain. The intent is that further tunable settings will also be
placed inside this element.
<interface type='network'>
...
<tune>
<sndbuf>0</sndbuf>
...
</tune>
</interface>
This patch is in response to
https://bugzilla.redhat.com/show_bug.cgi?id=643050
The existing libvirt support for the vhost-net backend to the virtio
network driver happens automatically - if the vhost-net device is
available, it is always enabled, otherwise the standard userland
virtio backend is used.
This patch makes it possible to force whether or not vhost-net is used
with a bit of XML. Adding a <driver> element to the interface XML, eg:
<interface type="network">
<model type="virtio"/>
<driver name="vhost"/>
will force use of vhost-net (if it's not available, the domain will
fail to start). if driver name="qemu", vhost-net will not be used even
if it is available.
If there is no <driver name='xxx'/> in the config, libvirt will revert
to the pre-existing automatic behavior - use vhost-net if it's
available, and userland backend if vhost-net isn't available.
This commit adds support for IPv6 parsing and formatting to the
virtual network XML parser, including moving around data definitions
to allow for multiple <ip> elements on a single network, but only
changes the consumers of this API to accommodate for the changes in
API/structure, not to add any actual IPv6 functionality. That will
come in a later patch - this patch attempts to maintain the same final
functionality in both drivers that use the network XML parser - vbox
and "bridge" (the Linux bridge-based driver used by the qemu
hypervisor driver).
* src/libvirt_private.syms: Add new private API functions.
* src/conf/network_conf.[ch]: Change C data structure and
parsing/formatting.
* src/network/bridge_driver.c: Update to use new parser/formatter.
* src/vbox/vbox_tmpl.c: update to use new parser/formatter
* docs/schemas/network.rng: changes to the schema -
* there can now be more than one <ip> element.
* ip address is now an ip-addr (ipv4 or ipv6) rather than ipv4-addr
* new optional "prefix" attribute that can be used in place of "netmask"
* new optional "family" attribute - "ipv4" or "ipv6"
(will default to ipv4)
* define data types for the above
* tests/networkxml2xml(in|out)/nat-network.xml: add multiple <ip> elements
(including IPv6) to a single network definition to verify they are being
correctly parsed and formatted.
In practice this has always been optional, but the RNG has shown it as
mandatory, and since all the examples for make check had it, it was
never noticed. One of the existing test cases has been changed to
check for this.
I also noticed that the dhcp/host/ip was still defined as <text/>,
but should really be <ref name='ipv4-addr'/>
The xml watchdog dump option is converted to qemu watchdog pause arg
but it is not reasonable to convert it back from qemu watchdog pause
arg since there already is a xml watchdog pause option, so a test for
the dump option to convert it from arg to xml is not added.
Changes common to all network disks:
-Make source name optional in the domain schema, since NBD doesn't use it
-Add a hostName type to the domain schema, and use it instead of genericName, which doesn't include .
-Don't leak host names or ports
-Set the source protocol in qemuParseCommandline
Signed-off-by: Josh Durgin <joshd@hq.newdream.net>
This patch adds network disk support to libvirt/QEMU. The currently
supported protocols are nbd, rbd, and sheepdog. The XML syntax is like
this:
<disk type="network" device="disk">
<driver name="qemu" type="raw" />
<source protocol='rbd|sheepdog|nbd' name="...some image identifier...">
<host name="mon1.example.org" port="6000">
<host name="mon2.example.org" port="6000">
<host name="mon3.example.org" port="6000">
</source>
<target dev="vda" bus="virtio" />
</disk>
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
The XML docs describe a 'port' attribute for the
storage source <host> element, but the parser never
handled it.
* docs/schemas/storagepool.rng: Define port attribute
* src/conf/storage_conf.c: Add missing parsing/formatting
of host port number
* src/conf/storage_conf.h: Remove bogus/unused 'protocol' field
IP addresses and MAC addresses had been defined in the RNG simply as
<text/> meaning that, according to the RNG, any string could go in
there. Of course the C parsing code does a much better job of
validating, but we may as well have this describing the contents
accurately (even though it's currently only used during "make check").
All the other RNG files in libvirt are enclosed within <grammar>. This
commit makes the syntactical changes necessary to make network.rng fit
that pattern. (This is the first step in adding some data type
definitions to network.rng for more exact validation of IP and MAC
addresses).
Formatting changes (indentation) will be done in a subsequent commit,
so that actual changes to the code won't be obscured by whitespace.
* docs/schemas/domain.rng: Fix merge error which left SPICE channel
elements under VNC schema.
* tests/qemuhelptest.c: Add SPICE flag to kvm-83 test
* tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add
<memballoon> element
This extends the SPICE XML to allow channel security options
<graphics type='spice' port='-1' tlsPort='-1' autoport='yes'>
<channel name='main' mode='secure'/>
<channel name='record' mode='insecure'/>
</graphics>
Any non-specified channel uses the default, which allows both
secure & insecure usage
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/libvirt_private.syms: Add XML syntax for specifying per
channel security options for spice.
* src/qemu/qemu_conf.c: Configure channel security with spice
This adds an element
<graphics type='spice' port='5903' tlsPort='5904' autoport='yes' listen='127.0.0.1'/>
This is the bare minimum that should be exposed in the guest
config for SPICE. Other parameters are better handled as per
host level configuration tunables
* docs/schemas/domain.rng: Define the SPICE <graphics> schema
* src/domain_conf.h, src/domain_conf.c: Add parsing and formatting
for SPICE graphics config
* src/qemu_conf.c: Complain about unsupported graphics types
* src/qemu_conf.c: Add dummy entry in enumeration
* docs/schemas/domain.rng: Add 'qxl' as a type for the <video> tag
* src/domain_conf.c, src/domain_conf.h: Add QXL to video type
enumerations
the element has a mode attribute allowing only 3 values:
- emulate: use the smbios emulation from the hypervisor
- host: try to use the smbios values from the node
- sysinfo: grab the values from the <sysinfo> fields
* docs/schemas/domain.rng: extend the schemas
* src/conf/domain_conf.h: add the flag to the domain config
* src/conf/domain_conf.h: parse and serialize the smbios if present
Syntax agreed on in
https://www.redhat.com/archives/libvir-list/2010-September/msg00476.html
<domain ...>
<vcpu current='x'>y</vcpu>
...
can now be used to specify 1 <= x <= y current vcpus, in relation
to the boot-time max of y vcpus. If current is omitted, then
current and max are assumed to be the same value.
* docs/schemas/domain.rng: Add new attribute.
* docs/formatdomain.html.in: Document it.
* tests/qemuxml2argvdata/qemuxml2argv-smp.xml: Add to
domainschematest.
* tests/xml2sexprdata/xml2sexpr-pv-vcpus.xml: Likewise.
This introduces new attribute to filesystem element
to support customizable access mode for mount type.
Valid accessmode are: passthrough, mapped and squash.
Usage:
<filesystem type='mount' accessmode='passthrough'>
<source dir='/export/to/guest'/>
<target dir='mount_tag'/>
</filesystem>
passthrough is the default model if not specified, that's
also the current behaviour.
The <vcpu cpuset=...> attribute has been available since commit
e193b5dd, but without documentation or RNG validation.
* docs/schemas/domain.rng (vcpu): Further validate cpuset.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.c: Fix typos.
Xen supports on_crash actions coredump-{destroy,restart}. libvirt
cannot parse config returned by xend that contains either of these
actions
xen52 # xm li -l test | grep on_crash
(on_crash coredump-restart)
xen52 # virsh dumpxml test
error: internal error unknown lifecycle type coredump-restart
This patch adds a new virDomainLifecycleCrash enum and appends
the new options to existing destroy, restart, preserve, and
rename-restart options.
I wrote a patch to add support for listing the Vendor and Model of a
storage pool in the storage pool XML. This would allow vendor
extensions of specific devices. The patch includes a test for the new
attributes as well.
Patrick Dignan
The balloon device is automatically added to qemu guests if supported,
but it may be useful to desactivate it. The simplest to not change the
existing behaviour is to allow
<memballoon type="none"/>
as an extra option to desactivate it (it is automatically added if the
memballoon construct is missing for the domain).
The following simple patch just adds the extra option and does not
change the default behaviour but avoid creating a balloon device if
type="none" is used.
* docs/schemas/domain.rng: add the extra type attribute value
* src/conf/domain_conf.c src/conf/domain_conf.h: add the extra enum
value
* src/qemu/qemu_conf.c: if enum is NONE, don't activate the device,
i.e. don't pass the args to qemu/kvm
All <console> devices now export a <target> type attribute. QEMU defaults
to 'serial', UML defaults to 'uml, xen can be either 'serial' or 'xen'
depending on fullvirt. Understandably there is lots of test fallout.
This will be used to differentiate between a serial vs. virtio console for
QEMU.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add a new element to the <os> block:
<bootmenu enable="yes|no"/>
Which maps to -boot,menu=on|off on the QEMU command line.
I decided to use an explicit 'enable' attribute rather than just make the
bootmenu element boolean. This allows us to treat lack of a bootmenu element
as 'use hypervisor default'.
Thanks to DV for knocking together the Relax-NG changes
quickly for me.
Changes since v1:
- Change the domain.rng to correspond to the new schema
- Don't allocate caps->ns in testQemuCapsInit since it is a static table
Changes since v2:
- Change domain.rng to add restrictions on allowed environment names
Changes since v3:
- Remove a bogus comment in the tests
Signed-off-by: Chris Lalancette <clalance@redhat.com>
To allow compatibility with older QEMU PCI device slot assignment
it is necessary to explicitly track the balloon device in the
XML. This introduces a new device
<memballoon model='virtio|xen'/>
It can also have a PCI address, auto-assigned if necessary.
The memballoon will be automatically added to all Xen and QEMU
guests by default.
* docs/schemas/domain.rng: Add <memballoon> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing
and formatting for memballoon device. Always add a memory
balloon device to Xen/QEMU if none exists in XML
* src/libvirt_private.syms: Export memballoon model APIs
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Honour the
PCI device address in memory balloon device
* tests/*: Update to test new functionality
By specifying <vendor> element in CPU requirements a guest can be
restricted to run only on CPUs by a given vendor. Host CPU vendor is
also specified in capabilities XML.
The vendor is checked when migrating a guest but it's not forced, i.e.,
guests configured without <vendor> element can be freely migrated.
According to docs/formatdomain.html.in, "The boot element can be
repeated multiple times to setup a priority list of boot devices to try
in turn." The Relax-NG schema required / allowed exactly one entry.
Signed-off-by: Philipp Hahn <hahn@univention.de>
This patch adds an optional XML attribute to a nwfilter rule to give the user control over whether the rule is supposed to be using the iptables state match or not. A rule may now look like shown in the XML below with the statematch attribute either having value '0' or 'false' (case-insensitive).
[...]
<rule action='accept' direction='in' statematch='false'>
<tcp srcmacaddr='1:2:3:4:5:6'
srcipaddr='10.1.2.3' srcipmask='32'
dscp='33'
srcportstart='20' srcportend='21'
dstportstart='100' dstportend='1111'/>
</rule>
[...]
I am also extending the nwfilter schema and add this attribute to a test case.
The virtio serial changes broke the test suite because they forgot
to add the new address attribute to the domain XML schema. The
xml2xml test also broke because the XML no longer roundtrips. This
is due to testing of auto-addition of <controller> elements. Split
that test case off into a separate XML file to avoid breakage
* docs/schemas/domain.rng: Allow port number for virtio serial addresses
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args,
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: Revert to
a simple config to avoid breaking xml2xml test
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.xml,
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.args: Add
complex test case for auto-controller addition for xml2argv test
* tests/qemuxml2argvtest.c: Add channel-virtio-auto test
This patch parses the following two XML descriptions, one for
802.1Qbg and one for 802.1Qbh, and stores the data internally.
The actual triggering of the switch setup protocol has not been
implemented here but the relevant code to do that should go into
the functions associatePortProfileId() and disassociatePortProfileId().
<interface type='direct'>
<source dev='eth0.100' mode='vepa'/>
<model type='virtio'/>
<virtualport type='802.1Qbg'>
<parameters managerid='12' typeid='0x123456' typeidversion='1'
instanceid='fa9b7fff-b0a0-4893-8e0e-beef4ff18f8f'/>
</virtualport>
<filterref filter='clean-traffic'/>
</interface>
<interface type='direct'>
<source dev='eth0.100' mode='vepa'/>
<model type='virtio'/>
<virtualport type='802.1Qbh'>
<parameters profileid='my_profile'/>
</virtualport>
</interface>
I'd suggest to use this patch as a base for triggering the setup
protocol with the 802.1Qb{g|h} switch.
Several rounds of changes were made to this patch. The
following is a list of these changes.
- Renamed structure virVirtualPortProfileDef to virVirtualPortProfileParams
as per Daniel Berrange's request
- Addressing Daniel Berrange's comments:
- removing macvtap.h's dependency on domain_conf.h by
moving the virVirtualPortProfileDef structure into macvtap.h
and not passing virtDomainNetDefPtr to any functions in
macvtap.c
- Addressed most of Chris Wright's comments:
- indicating error in case virtualport XML node cannot be parsed
properly
- parsing hex and decimal numbers using virStrToLong_ui() with
parameter '0' for base
- tgifname (target interface name) variable wasn't necessary
to pass to openMacvtapTap function anymore
- assigning the virtual port data structure to the virDomainNetDef
only if it was previously parsed
- make sure that the error code returned by openMacvtapTap() is a negative n
in case the associatePortProfileId() function failed.
- renaming vsi in the XML to virtualport
- replace all occurrences of vsi in the source as well
- removing mode and MAC address parameters from the functions that
will communicate with the hareware diretctly or indirectly
- moving the associate and disassociate functions to the end of the
file for subsequent patches to easier make them generally available
for export
- passing the macvtap interface name rather than the link device since
this otherwise gives funny side effects when using netlink messages
where IFLA_IFNAME and IFLA_ADDRESS are specified and the link dev
all of a sudden gets the MAC address of the macvtap interface.
- Removing rc = -1 error indications in the case of 802.1Qbg|h setup in case
we wanted to use hook scripts for the setup and so the setup doesn't fail
here.
- if instance ID UUID is not supplied it will automatically be generated
- adapted schema to make instance ID UUID optional
- added test case
- parser and XML generator have been separated into their own
functions so they can be re-used elsewhere (passthrough case
for example)
- Adapted XML parser and generator support the above shown type
(802.1Qbg, 802.1Qbh).
- Adapted schema to above XML
- Adapted test XML to above XML
- Passing through the VM's UUID which seems to be necessary for
802.1Qbh -- sorry no host UUID
- adding virtual function ID to association function, in case it's
necessary to use (for SR-IOV)
Allow for a host UUID in the capabilities XML. Local drivers
will initialize this from the SMBIOS data. If a sanity check
shows SMBIOS uuid is invalid, allow an override from the
libvirtd.conf configuration file
* daemon/libvirtd.c, daemon/libvirtd.conf: Support a host_uuid
configuration option
* docs/schemas/capability.rng: Add optional host uuid field
* src/conf/capabilities.c, src/conf/capabilities.h: Include
host UUID in XML
* src/libvirt_private.syms: Export new uuid.h functions
* src/lxc/lxc_conf.c, src/qemu/qemu_driver.c,
src/uml/uml_conf.c: Set host UUID in capabilities
* src/util/uuid.c, src/util/uuid.h: Support for host UUIDs
* src/node_device/node_device_udev.c: Use the host UUID functions
* tests/confdata/libvirtd.conf, tests/confdata/libvirtd.out: Add
new host_uuid config option to test
So far the references to other filters needed to appear before filtering
rules. With the below patch they can now appear in any order.
Also I forgot to add a couple of 'rarp's.
This patch adds support for the RARP protocol. This may be needed due to
qemu sending out a RARP packet (at least that's what it seems to want to
do even though the protocol id is wrong) when migration finishes and
we'd need a rule to let the packets pass.
Unfortunately my installation of ebtables does not understand -p RARP
and also seems to otherwise depend on strings in /etc/ethertype
translated to protocol identifiers. Therefore I need to pass -p 0x8035
for RARP. To generally get rid of the dependency of that file I switch
all so far supported protocols to use their protocol identifier in the
-p parameter rather than the string.
I am also extending the schema and added a test case.
changes from v1 to v2:
- added test case into patch
With this patch I want to enable hex number inputs in the filter XML. A
number that was entered as hex is also printed as hex unless a string
representing the meaning can be found.
I am also extending the schema and adding a test case. A problem with
the DSCP value is fixed on the way as well.
Changes from V1 to V2:
- using asHex boolean in all printf type of functions to select the
output format in hex or decimal format
This patch adds a relaxng nwfilter schema along with a test that
verifies all the test output XML against the schema. The input XMLs
contain a lot of intentional out-of-range values that make them fail the
schema verification, so I am not verifying against those.
The clock timer XML is being updated in the following ways (based on
further off-list discussion that was missed during the initial
implementation):
1) 'wallclock' is changed to 'track', and the possible values are 'boot'
(corresponds to old 'host'), 'guest', and 'wall'.
2) 'mode' has an additional value 'smpsafe'
3) when tickpolicy='catchup', there can be an optional sub-element of
timer called 'catchup':
<catchup threshold=123 slew=120 limit=10000/>
Those three values are all longs, always optional, and if they are present,
they are positive. Internally, 0 indicates "unspecified".
* docs/schemas/domain.rng: updated RNG definition to account for changes
* src/conf/domain_conf.h: change the C struct and enums to match changes.
* src/conf/domain_conf.c: timer parse and format functions changed to
handle the new selections and new element.
* src/libvirt_private.syms: *TimerWallclock* changes to *TimerTrack*
* src/qemu/qemu_conf.c: again, account for Wallclock --> Track change.
timers are sub-elements of clocks. A clock can have zero or more
instances of timer. Within the timer, only the name attribute is
required; all other attributes are optional.
A simpler representation of a timer element is:
<timer name='platform|pit|rtc|hpet|tsc'
wallclock='host|guest'
tickpolicy='delay|catchup|merge|discard'
frequency='123'
mode='auto|native|emulate|paravirt'
present='yes|no'/>
frequency is a ulong. All other attributes are simple enums.
* Fixes per feedback from Dan and Daniel
* Added test datafiles
* Re-disabled JSON flags
* Added code to print the error policy attribute when generating XML
* Re-add empty tag
This extends the XML to allow for
<clock offset='timezone' timezone='Europe/Paris'/>
This is useful if the admin has not configured any timezone on the
host OS, but still wants to synchronize a guest to a specific one.
* src/conf/domain_conf.h, src/conf/domain_conf.c: Support extra
'timezone' attribute on clock configuration
* docs/schemas/domain.rng: Add 'timezone' attribute
* src/xen/xend_internal.c, src/xen/xm_internal.c: Reject configs
with a configurable timezone
This introduces a third option for clock offset synchronization,
that allows an arbitrary / variable adjustment to be set. In
essence the XML contains the time delta in seconds, relative to
UTC.
<clock offset='variable' adjustment='123465'/>
The difference from 'utc' mode, is that management apps should
track adjustments and preserve them at next reboot.
* docs/schemas/domain.rng: Schema for new clock mode
* src/conf/domain_conf.c, src/conf/domain_conf.h: Parse
new clock time delta
* src/libvirt_private.syms, src/util/xml.c, src/util/xml.h: Add
virXPathLongLong() method
Add support for virtio-serial by defining a new 'virtio' channel target type
and a virtio-serial controller. Allows the following to be specified in a
domain:
<controller type='virtio-serial' index='0' ports='16' vectors='4'/>
<channel type='pty'>
<target type='virtio' name='org.linux-kvm.port.0'/>
<address type='virtio-serial' controller='0' bus='0'/>
</channel>
* docs/schemas/domain.rng: Add virtio-serial controller and virtio
channel type.
* src/conf/domain_conf.[ch]: Domain parsing/serialization for
virtio-serial controller and virtio channel.
* tests/qemuxml2xmltest.c
tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.xml: add domain xml
parsing test
* src/libvirt_private.syms src/qemu/qemu_conf.c:
virDomainDefAddDiskControllers() renamed to
virDomainDefAddImplicitControllers()
The current schema is more permissive than the XML parsing code in
libvirt. Precisely, 'match' attribute is optional in schema while in
reality its use is bound to <model> element:
- <cpu> element without 'match' attribute is allowed only if <topology>
element is the only child element of <cpu>
- <cpu> element with 'match' attribute requires <model> element to be
present; <topology> and <feature> elements are optional
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When attaching a USB host device based on vendor/product, libvirt
will resolve the vendor/product into a device/bus pair. This means
that when printing XML we should allow device/bus info to be printed
at any time if present
* src/conf/domain_conf.c, docs/schemas/domain.rng: Allow USB device
bus info alongside vendor/product
Allows the initiator to use a variety of IQNs rather than just the
system IQN when creating iSCSI pools.
* docs/schemas/storagepool.rng: extends the syntax with <iqn name="..."/>
* src/conf/storage_conf.[ch]: read and stores the iqn name
* src/storage/storage_backend_iscsi.[ch]: implement the IQN selection
when detected
The RNG now supports IPv6 and bonds attached to bridges, along with
some other minor tweaks. All test files from netcf have been copied to
the test directory and added to the xml2xml and schema tests (and they
all pass, of course ;-)
Currently CPU topology may only be specified together with CPU model:
<cpu match='exact'>
<model>name</model>
<topology sockets='1' cores='2' threads='3'/>
</cpu>
This patch allows for CPU topology specification without the need for
also specifying CPU model:
<cpu>
<topology sockets='1' cores='2' threads='3'/>
</cpu>
'match' attribute and 'model' element are made optional with the
restriction that 'match' attribute has to be set when 'model' is
present.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Although the serial, parallel, chanel, input & fs devices do
not have PCI address info, they can all have device aliases.
Thus it neccessary to associate the virDomainDeviceInfo data
with them all.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add hooks for
parsing / formatting device info for serial, parallel, channel
input and fs devices.
* docs/schemas/domain.rng: Associate device info with character
devices, input & fs device
This augments virDomainDevice with a <controller> element
that is used to represent disk controllers (e.g., scsi
controllers). The XML format is given by
<controller type="scsi" index="<num>">
<address type="pci" domain="0xNUM" bus="0xNUM" slot="0xNUM"/>
</controller>
where type denotes the disk interface (scsi, ide,...), index
is an integer that identifies the controller for association
with disks, and the <address> element specifies the controller
address on the PCI bus as described in previous commits
The address element can be omitted; in this case, an address
will be assigned automatically.
Most of the code in this patch is from Wolfgang Mauerer's
previous disk controller series
* docs/schemas/domain.rng: Define syntax for <controller>
XML element
* src/conf/domain_conf.c, src/conf/domain_conf.h: Define
virDomainControllerDef struct, and routines for parsing
and formatting XML
* src/libvirt_private.syms: Add virDomainControllerInsert
and virDomainControllerDefFree
Add the virDomainDeviceAddress information to the sound, video
and watchdog devices. This means all of them gain the new XML
element
<address .... />
This brings them upto par with disk/net/hostdev devices which
already have address info
* src/conf/domain_conf.h: Add virDomainDeviceAddress to sound,
video & watchdog device struts.
* src/conf/domain_conf.c: Hook up parsing/formatting for
virDomainDeviceAddress in sound, video & watchdog devices
* docs/schemas/domain.rng: Associate device address info
with sound, video & watchdog
Introduce a new structure
struct _virDomainDeviceDriveAddress {
unsigned int controller;
unsigned int bus;
unsigned int unit;
};
and plug that into virDomainDeviceAddress and generates XML that
looks like
<address type='drive' controller='1' bus='0' unit='5'/>
This syntax will be used by the QEMU driver to explicitly control
how drives are attached to the bus
* src/conf/domain_conf.h, src/conf/domain_conf.c: Parsing and
formatting of drive addresses
* docs/schemas/domain.rng: Define new address format for drives
All guest devices now use a common device address structure
summarized by:
enum virDomainDeviceAddressType {
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE,
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI,
};
struct _virDomainDevicePCIAddress {
unsigned int domain;
unsigned int bus;
unsigned int slot;
unsigned int function;
};
struct _virDomainDeviceInfo {
int type;
union {
virDomainDevicePCIAddress pci;
} addr;
};
This replaces the anonymous structs in Disk/Net/Hostdev data
structures. Where available, the address is *always* printed
in the XML file, instead of being hidden in the internal state
file.
<address type='pci' domain='0x0000' bus='0x1e' slot='0x07' function='0x0'/>
The structure definition is based on Wolfgang Mauerer's disk
controller patch series.
* docs/schemas/domain.rng: Define the <address> syntax and
associate it with disk/net/hostdev devices
* src/conf/domain_conf.h, src/conf/domain_conf.c,
src/libvirt_private.syms: APIs for parsing/formatting address
information. Also remove the QEMU specific 'pci_addr' attributes
* src/qemu/qemu_driver.c: Replace use of 'pci_addr' attrs with
new standardized format.
XML schema for CPU flags
Firstly, CPU topology and model with optional features have to be
advertised in host capabilities:
<host>
<cpu>
<arch>ARCHITECTURE</arch>
<features>
<!-- old-style features are here -->
</features>
<model>NAME</model>
<topology sockets="S" cores="C" threads="T"/>
<feature name="NAME"/>
</cpu>
...
</host>
Secondly, drivers which support detailed CPU specification have to
advertise
it in guest capabilities:
<guest>
...
<features>
<cpuselection/>
</features>
</guest>
And finally, CPU may be configured in domain XML configuration:
<domain>
...
<cpu match="MATCH">
<model>NAME</model>
<topology sockets="S" cores="C" threads="T"/>
<feature policy="POLICY" name="NAME"/>
</cpu>
</domain>
Where MATCH can be one of:
- 'minimum' specified CPU is the minimum requested CPU
- 'exact' disable all additional features provided by host CPU
- 'strict' fail if host CPU doesn't exactly match
POLICY can be one of:
- 'force' turn on the feature, even if host doesn't have it
- 'require' fail if host doesn't have the feature
- 'optional' match host
- 'disable' turn off the feature, even if host has it
- 'forbid' fail if host has the feature
'force' and 'disable' policies turn on/off the feature regardless of its
availability on host. 'force' is unlikely to be used but its there for
completeness since Xen and VMWare allow it.
'require' and 'forbid' policies prevent a guest from being started on a host
which doesn't/does have the feature. 'forbid' is for cases where you disable
the feature but a guest may still try to access it anyway and you don't want
it to succeed.
'optional' policy sets the feature according to its availability on host.
When a guest is booted on a host that has the feature and then migrated to
another host, the policy changes to 'require' as we can't take the feature
away from a running guest.
Default policy for features provided by host CPU but not specified in domain
configuration is set using match attribute of cpu tag. If 'minimum' match is
requested, additional features will be treated as if they were specified
with 'optional' policy. 'exact' match implies 'disable' policy and 'strict'
match stands for 'forbid' policy.
* docs/schemas/capability.rng docs/schemas/domain.rng: extend the
RelaxNG schemas to add CPU flags support
Introduce a new type="dir" mode for <disks> that allows use of
QEMU's virtual FAT block device driver. eg
<disk type='dir' device='floppy'>
<source dir='/tmp/test'/>
<target dev='fda' bus='fdc'/>
<readonly/>
</disk>
gets turned into
-drive file=fat:floppy:/tmp/test,if=floppy,index=0
Only read-only disks are supported with virtual FAT mode
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
disk args
* src/security/security_selinux.c: Temporarily skip labelling
of directory based disks
For backward compatibility we used to add the tty path as
a tty attribute on console of type pty, duplicating the value
now found in source/@path, but the Relax-NG grammar wasn't
extended for this
<console type='pty' tty='/dev/pts/8'>
<source path='/dev/pts/8'/>
<target port='0'/>
</console>
* docs/schemas/domain.rng: allow an optional tty attribute
containing a devicePath
allows the following to be specified in a domain:
<channel type='pipe'>
<source path='/tmp/guestfwd'/>
<target type='guestfwd' address='10.0.2.1' port='4600'/>
</channel>
* proxy/Makefile.am: add network.c as dep of domain_conf.c
* docs/schemas/domain.rng src/conf/domain_conf.[ch]: extend the domain
schemas and the parsing/serialization side for the new construct
QEmu support will add the following on the qemu command line:
-chardev pipe,id=channel0,path=/tmp/guestfwd
-net user,guestfwd=tcp:10.0.2.1:4600-chardev:channel0
* src/qemu/qemu_conf.c: Add argument output for channel
* tests/qemuxml2(argv|xml)test.c: Add test for <channel> domain syntax
This patch adds an optional attribute to the <bootp> tag, that
allows to specify a TFTP server address other than the address of
the DHCP server itself.
This can be used to forward the BOOTP settings of the host down to the
guest. This is something that configurations such as Xen's default
network achieve naturally, but must be done manually for NAT.
* docs/formatnetwork.html.in: Document new attribute.
* docs/schemas/network.rng: Add it to schema.
* src/conf/network_conf.h: Add it to struct.
* src/conf/network_conf.c: Add it to parser and pretty printer.
* src/network/bridge_driver.c: Put it in the dnsmasq command line.
* tests/networkxml2xmlin/netboot-proxy-network.xml
tests/networkxml2xmlout/netboot-proxy-network.xml
tests/networkxml2xmltest.c: add new tests
* src/conf/storage_conf.c src/conf/storage_conf.h: extend the enums
and values
* docs/schemas/storagepool.rng: add to the list of storage pool type
formats
- mpath pools weren't listed
- scsi pools were missing an adapter section
- iscsi pools were missing an auth section
- Logical pools do not require a source name to be specified
The domain/os/type element may have an arch specified without having
a machine variant specified. In fact, this is what python-virtinst
does when defining a guest.
* docs/schemas/domain.rng: allow missing machine type
* docs/schemas/domain.rng: allow one <description> tag in the top level
of the <domain> to store user information as text
* src/conf/domain_conf.c src/conf/domain_conf.h: extend the structure
to store this text, grab it at parse time and save it back when
present after <uuid>
Currently, libvirtd will start a dnsmasq process for the virtual
network, but (aside from killing the dnsmasq process and replacing it),
there's no way to define tftp boot options.
This change introduces the appropriate tags to the dhcp configuration:
<network>
<name>default</name>
<bridge name="virbr%d" />
<forward/>
<ip address="192.168.122.1" netmask="255.255.255.0">
<tftp root="/var/lib/tftproot" />
<dhcp>
<range start="192.168.122.2" end="192.168.122.254" />
<bootp file="pxeboot.img"/>
</dhcp>
</ip>
</network>
When the attributes are present, these are passed to the
arguments to dnsmasq:
dnsmasq [...] --enable-tftp --tftp-root /srv/tftp --dhcp-boot pxeboot.img
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^
from <tftp /> from <bootp />
At present, only local tftp servers are supported (ie, dnsmasq runs as
the tftp server), but we could improve this in future by adding a
server= attribute.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2009-09-21 Paolo Bonzini <pbonzini@redhat.com>
Jeremy Kerr <jk@ozlabs.org>
* docs/formatnetwork.html.in: Document new tags.
* docs/formatnetwork.html: Regenerate.
* docs/schemas/network.rng: Update.
* src/network_conf.c (virNetworkDefFree): Free new fields.
(virNetworkDHCPRangeDefParseXML): Parse <bootp>.
(virNetworkIPParseXML): New, parsing <dhcp> and <tftp>.
(virNetworkDefParseXML): Use virNetworkIPParseXML instead of
virNetworkDHCPRangeDefParseXML.
(virNetworkDefFormat): Pretty print new fields.
* src/network_conf.h (struct _virNetworkDef): Add netboot fields.
* src/network_driver.c (networkBuildDnsmasqArgv): Add
TFTP and BOOTP arguments.
* tests/Makefile.am (EXTRA_DIST): Add networkschemadata.
* tests/networkschematest: Look in networkschemadata.
* tests/networkschemadata/netboot-network.xml: New.
Convert all the secret/storage encryption APIs / wire format to
handle UUIDs in raw format instead of non-canonical printable
format. Guarentees data format correctness.
* docs/schemas/storageencryption.rng: Make UUID mandatory for a secret
and validate fully
* docs/schemas/secret.rng: Fully validate UUID
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in, Add
virSecretLookupByUUID and virSecretGetUUID. Make
virSecretGetUUIDString follow normal API design pattern
* python/generator.py: Skip generation of virSecretGetUUID,
virSecretGetUUIDString and virSecretLookupByUUID
* python/libvir.c, python/libvirt-python-api.xml: Manual impl
of virSecretGetUUID,virSecretGetUUIDString and virSecretLookupByUUID
* qemud/remote.c: s/virSecretLookupByUUIDString/virSecretLookupByUUID/
Fix get_nonnull_secret/make_nonnull_secret to use unsigned char
* qemud/remote_protocol.x: Fix remote_nonnull_secret to use a
remote_uuid instead of remote_nonnull_string for UUID field.
Rename REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING to
REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING and make it take an
remote_uuid value
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.h, src/datatypes.c: Store UUID in raw format instead
of printable. Change virGetSecret to use raw format UUID
* src/driver.h: Rename virDrvSecretLookupByUUIDString to
virDrvSecretLookupByUUID and use raw format UUID
* src/libvirt.c: Add virSecretLookupByUUID and virSecretGetUUID
and re-implement virSecretLookupByUUIDString and
virSecretGetUUIDString in terms of those
* src/libvirt_public.syms: Add virSecretLookupByUUID and
virSecretGetUUID
* src/remote_internal.c: Rename remoteSecretLookupByUUIDString
to remoteSecretLookupByUUID. Fix typo in args for
remoteSecretDefineXML impl. Use raw UUID format for
get_nonnull_secret and make_nonnull_secret
* src/storage_encryption_conf.c, src/storage_encryption_conf.h:
Storage UUID in raw format, and require it to be present in
XML. Use UUID parser to validate.
* secret_conf.h, secret_conf.c: Generate a UUID if none is provided.
Storage UUID in raw format.
* src/secret_driver.c: Adjust to deal with raw UUIDs. Save secrets
in a filed with printable UUID, instead of base64 UUID.
* src/virsh.c: Adjust for changed public API contract of
virSecretGetUUIDString.
* src/storage_Backend.c: DOn't undefine secret we just generated
upon successful volume creation. Fix to handle raw UUIDs. Generate
a non-clashing UUID
* src/qemu_driver.c: Change to use lookupByUUID instead of
lookupByUUIDString
* docs/schemas/domain.rng: Add <serial> element to disks
* src/domain_conf.h, src/domain_conf.c: XML parsing and
formatting for disk serial numbers
* src/qemu_conf.c: Set serial number when launching guests
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.args,
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.xml: Add
serial number to XML test
Add option to domain XML for
<memoryBacking>
<hugepages/>
</memoryBacking>
* configure.in: Add check for mntent.h
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug, src/qemu.conf
Add 'hugetlbfs_mount' config parameter
* src/qemu_conf.c, src/qemu_conf.h: Check for -mem-path flag in QEMU,
and pass it when hugepages are requested.
Load hugetlbfs_mount config parameter, search for mount if not given.
* src/qemu_driver.c: Free hugetlbfs_mount/path parameter in driver shutdown.
Create directory for QEMU hugepage usage, chowning if required.
* docs/formatdomain.html.in: Document memoryBacking/hugepages elements
* docs/schemas/domain.rng: Add memoryBacking/hugepages elements to schema
* src/util.c, src/util.h, src/libvirt_private.syms: Add virFileFindMountPoint
helper API
* tests/qemuhelptest.c: Add -mem-path constants
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: Add tests for hugepage
handling
* tests/qemuxml2argvdata/qemuxml2argv-hugepages.xml,
tests/qemuxml2argvdata/qemuxml2argv-hugepages.args: Data files for
hugepage tests
* docs/schemas/domain.rng: augment the video model with an optional
acceleration element with optional accel2d and accel3d flags
* src/domain_conf.c src/domain_conf.h: exten the virDomainVideoDef
structure with an optional accel field, virDomainVideoAccelDefParseXML
and virDomainVideoAccelDefFormat functions to parse and serialize
the structure.
The XML allows <encryption format='unencrypted'/>, this implementation
canonicalizes the internal representation so that "disk->encryption" is
non-NULL iff encryption information is available.
A domain with partial encryption information can be defined,
completeness of the information is not verified. The domain won't
start until the remaining information is added, of course.
* docs/formatdomain.html, docs/formatdomain.html.in: Document
new encryption options for disks
* docs/schemas/domain.rng: Pull in storage encryption schema
rules
* src/domain_conf.h, src/domain_conf.c: Wire up storage encryption
XML parsing/formatting APIs
The XML allows <encryption format='unencrypted'/>, this implementation
canonicalizes the internal representation so that "vol->encryption" is
non-NULL iff the volume is encrypted.
Note that partial encryption information (e.g. specifying an encryption
format, but not the key/passphrase) is valid, libvirt will automatically
choose value for the missing information during volume creation. The
user can read the volume XML, and use the unmodified <encryption> tag in
future operations (without having to be able to understand) its contents.
* docs/formatstorage.html, docs/formatstorage.html.in: Document
storage volume encryption options
* src/storage_conf.c, src/storage_conf.h: Hook up storage
encryption XML handling
* tests/storagevolschemadata/vol-qcow2.xml: Test case for encryption
schema changes
Define an <encryption> tag specifying volume encryption format and
format-depenedent parameters (e.g. passphrase, cipher name, key
length, key).
Currently the only defined parameter is a reference to a "secret"
(passphrase/key) managed using the virSecret* API.
Only the qcow/qcow2 encryption format, and a "default" format used to
let libvirt choose the format during volume creation, is currently
supported.
This patch does not add any users; the <encryption> tag is added in
the following patches to both volumes (to support encrypted volume
creation) and domains.
* docs/*.html: Re-generate
* docs/formatstorageencryption.html.in, docs/sitemap.html.in:
Add page describing storage encryption data format
* docs/schemas/Makefile.am, docs/schemas/storageencryption.rng:
Add RNG schema for storage encryption format
* po/POTFILES.in: Add src/storage_encryption_conf.c
* src/libvirt_private.syms: Export virStorageEncryption* functions
* src/storage_encryption_conf.h, src/storage_encryption_conf.c: Internal
helper APIs for dealing with storage encryption format
* libvirt.spec.in, mingw32-libvirt.spec.in: Add storageencryption.rng
RNG schema
This patch adds a "secret" as a separately managed object, using a
special-purpose API to transfer the secret values between nodes and
libvirt users.
* docs/schemas/secret.rng, docs/schemas/Makefilem.am: Add new
schema for virSecret objects
* docs/*html: Re-generated
* docs/formatsecret.html.in, docs/sitemap.html.in: Add page
describing the virSecret XML schema
* include/libvirt/libvirt.h.in: Define the new virSecret public
API
* src/libvirt_public.syms: Export symbols for new public APIs
* mingw32-libvirt.spec.in, libvirt.spec.in: Add secret.rng to
files list
e.g. <machine canonical='pc'>pc-0.11</machine>
* src/capabilities.c: output the canonical machine names in the
capabilities output, if available
* docs/schemas/capabilities.rng: add the new attribute
by running this command:
git ls-files -z | xargs -0 perl -pi -0777 -e 's/\n\n+$/\n/'
This is in preparation for a more strict make syntax-check
rule that will detect trailing blank lines.
* docs/schemas/interface.rng: schemas for the interface XML files
directly imported from netcf-0.1.0
* tests/interfaceschemadata/*.xml: set of test files from netcf-0.1.0
changed to use single quote instead of double quote
* docs/schemas/domain.rng: Define <video> element schema
* src/domain_conf.c, src/domain_conf.h, src/libvirt_private.syms:
Add parsing and formatting for <video> element
* docs/schemas/network.rng: fix the network schemas to match
new accepted elements, patch by Satoru SATOH
* src/network_conf.c: fix network driver to save the domain name
in XML if present, patch by Satoru SATOH
* AUTHORS: adding Satoru SATOH
Daniel
* src/node_device_hal.c src/node_device_conf.[ch]: add support
for serial number in HAL storage backend, patch by Dave Allan
* docs/schemas/nodedev.rng
tests/nodedevschemadata/storage_serial_3600c0ff000d7a2a5d463ff4902000000.xml:
update the schemas and add a test case, also by Dave Allan
Daniel
* src/qemu_conf.c docs/schemas/domain.rng
tests/capabilityschemadata/caps-qemu-kvm.xml: PPC Qemu Machine Type
changed from g3bw to g3beige some time ago, patch by Thomas Baker
Daniel
* docs/schemas/storagevol.rng docs/formatstorage.html[.in]
tests/storagevolschemadata/vol-qcow2.xml: fix storage volume
inconsistencies in schema and document, patch by Ryota Ozaki
daniel
* docs/schemas/domain.rng src/domain_conf.[ch] src/qemu_driver.c:
extend the generic code for the RDP and desktop extensions of
the graphic tag needed for vbox, patch by Pritesh Kothari
Daniel
* src/domain_conf.[ch] docs/schemas/domain.rng: add support
for internal network in the generic part of the code, and
update the Relax-NG grammar accordingly, patch by Pritesh Kothari
daniel
* docs/schemas/domain.rng src/domain_conf.c src/domain_conf.h
src/qemu_conf.c
tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.xml
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.xml
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml:
adds a new <hostdev managed='(yes|no)'> property
to host devices indicating whether or not we should
automatically dettach/reset, patch by Mark McLoughlin
daniel
