The ScanTargets testing code declares some variables
in the middle of main.
Split it out into a separate function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Split those initializations that depend on a statement
above them.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Support qemu commandline passthrough in the domXML to native config
converter. Add tests to check the conversion.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow to map sound playback and recording devices to host devices
using "<audio type='oss'/>" OSS audio backend.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
bhyve supports intel hda sound devices that could be specified
on the command like using "-1:0,hda,play=$play_dev,rec=$rec_dev",
where "1:0" is a PCI address, and "$play_dev" and "$rec_dev"
point to the playback and recording device on the host respectively.
Currently, schema of the 'sound' element doesn't allow specifying
neither playback nor recording devices, so for now hardcode
/dev/dsp0, which is the first audio device on the host.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The existing auto-align behavior for pSeries has the idea to
alleviate user configuration of the NVDIMM size, given that the
alignment calculation is not trivial to do (256MiB alignment
of mem->size - mem->label_size value, a.k.a guest area). We
align mem->size down to avoid end of file problems.
The end result is not ideal though. We do not touch the domain
XML, meaning that the XML can report a NVDIMM size 255MiB smaller
than the actual size the guest is seeing. It also adds one more
thing to consider in case the guest is reporting less memory
than declared, since the auto-align is transparent to the
user.
Following Andrea's suggestion in [1], let's instead do an
size alignment validation. If the NVDIMM is unaligned, error out
and suggest a rounded up value. This can be bothersome to users,
but will bring consistency of NVDIMM size between the domain XML
and the guest.
This approach will force existing non-running pSeries guests to
readjust the NVDIMM value in their XMLs, if necessary. No changes
were made for x86 NVDIMM support.
[1] https://www.redhat.com/archives/libvir-list/2020-July/msg01471.html
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The machine types for this cycle were already added and qemu also added
a property for the machine type object called "default-ram-id".
Also "block-bitmap-mapping" is supported as a migration parameter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu-v5.1.0 is released now. There weren't any noticable changes since
our last update to 'rc2'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Ensure that the migration parameters are formatted properly according to
the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When netdev-add was qapified it took us by surprise and we had to
scramble to fix the internals to format conformant monitor arguments.
Add a last-resort early warning system if this happens to object-add or
device_add. Hopefully qemu developers notify us sooner than this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We'll need to match that a certain part of the qemu schema hasn't grown
new properties unexpectedly. Add a helper which matches an 'object' QMP
schema entry against a template and reports errors if expected types
don't match or new entries are added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There was a report on libvirt-users [1] about the domxml to/from
native converter in the Xen driver not handling PCI addresses
without a domain specification. This patch improves parsing of PCI
addresses in the converter and allows PCI addresses with only
bb:ss.f. xl.cfg(5) also allows either the dddd:bb:ss.f or bb:ss.f
format. A test has been added to check the conversion from xl.cfg
to domXML.
[1] https://www.redhat.com/archives/libvirt-users/2020-August/msg00040.html
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Update the remaining 'make check' references after the
switch to meson/ninja.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit bcbb026993 converted qemublocktest to use
g_autoptr for virQEMUCaps. To prevent it from crashing,
don't explicitly call virObjectUnref() on this object.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We already allow controlling the initiator IQN for iSCSI based disks.
Add the same for host devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both accept a NULL value gracefully and virStringFreeList
does not zero the pointer afterwards, so a straight replace
is safe.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Role(master or peer) controls how the domain behaves on migration.
For more details about migration with ivshmem, see
https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/system/ivshmem.rst;hb=HEAD
It's a optional attribute in libvirt, and qemu will choose default
role for ivshmem device if the user is not specified.
With device property 'role', the value can be 'master' or 'peer'.
- 'master' (means 'master=on' in qemu), the guest will copy
the shared memory on migration to the destination host.
- 'peer' (means 'master=off' in qemu), the migration is disabled.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Yang Hang <yanghang44@huawei.com>
Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We need to modify check-file-access.py to be usable as wrapper for
libvirt tests. This way we can run the tests using this command:
meson test --setup access
which will run all tests using check-file-access.py as a wrapper.
With autotools all file access are written into single file for all
tests and compared once the whole test suite is done.
With Meson we will compare the file access after every single test
because it is used as wrapper now. That requires writing the file
access into separate files for every single test as they are executed
in parallel.
Since the wrapper is used for all tests in Meson including tests outside
of tests directory we have to check for presence of the output file.
We should also cleanup after ourselves.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
With the old build system we just list the source files directly for
each test, but this would not work as expected with Meson.
For every binary there is a separate directory with its object files
which would mean all the utils sources would be compiled repeatedly
for every test using them.
Having static libraries ensures that the utils sources are compiled
only once.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Meson doesn't use .libs directory, everything is placed directly into
directories where meson.build file is used.
In order to have working tests and running libvirt directly from GIT we
need to fix all the paths pointing '.libs' directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Meson always defines _FILE_OFFSET_BITS=64 which effectively makes
mocking of non 64-bit stat functions dead code.
On linux it was not an issue because we use the 64-bit versions but
on FreeBSD there are not 64-bit versions, there is only stat & lstat.
We cannot simply drop the check as that would resolve to compilation
error on 64-bit linux:
{standard input}: Assembler messages:
{standard input}:11468: Error: symbol `__xstat64' is already defined
{standard input}:11679: Error: symbol `__xstat64.cold' is already defined
{standard input}:12034: Error: symbol `__lxstat64' is already defined
{standard input}:12245: Error: symbol `__lxstat64.cold' is already defined
So we have to replace the _FILE_OFFSET_BITS with a check if the
corresponding 64-bit version of the stat function exists.
Replicate the meson behavior by always defining _FILE_OFFSET_BITS
instead of using AC_SYS_LARGEFILE otherwise this change would break
our tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
With meson we no longer have .libs directory with the actual binary so
we have to take a different approach to detect if running from build
directory.
This is not as robust as for autotools because if you select --prefix
in the build directory it will incorrectly enable the override as well
but nobody should do that.
We have to modify some of the tests to not add current build path into
PATH variable and use the full path for virsh instead. Otherwise it
would be impossible to figure out that we are running virsh from build
directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
With autoconf this option controlled if the test suite is compiled by
default or not with the fact that it will be compiled later when
running `make check`.
With meson it is not possible to compile it later when running
`ninja test` as it will be always compiled if referenced by `test()`
function in meson.build files.
Since we cannot postpone compilation of the test suite drop this option
as it will not be converted to meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
EXTRA_DIST is not relevant because meson makes a git copy when creating
dist archive so everything tracked by git is part of dist tarball.
The remaining ones are not converted to meson files as they are
automatically tracked by meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
One variable per line.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reduce the scope of some variables and mark them as
g_autofree.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Except for a few cases where freeing it explicitly
seems to be done on purpose.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The 'checkoutput' function does have a parameter for a possible
prefix, but it is now unused.
Introduced-by: 241ac07124
Used-by: 62f263a73e
Unused-since: 2dfacbffea
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Note that 'numa-mem-supported' turned off for certain machine types
which in turn forced us to generate a newer command line in certain
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU is going to drop 'vxhs' in the upcoming release so we'll need to
track these separately to prevent test suite breakage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already test with real caps so there's no real need for this special
case. While it technically tested the state without TLS encryption key
secrets, it doesn't really matter that much.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'commandhelper' checks effectively whether the parent process is
still around to report whether it was daemonized or not.
This creates a unlikely race condition in cases when we do actually
daemonize the process as the intermediate process used for the
daemonization might not have terminated yet which would report wrong
result leading to test failure.
For now there's just 'test4' which actually daemonizes the process.
Add an argument '--check-daemonize' which asks for retries of the
daemonization check in cases where we expect that the commandhelper is
going to be daemonized and use it in 'test4' to make the test more
reliable.
I've observed the test failure sporadically when my box is under load
e.g. while building two trees at once.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The storage pool code now attempts to disable COW by default on btrfs,
but management applications may wish to override this behaviour. Thus we
introduce a concept of storage pool features:
<features>
<cow state='yes|no'/>
</features>
If the <cow> feature policy is set, it will be enforced. It will always
return an hard error if COW cannot be explicitly set or unset.
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is only used in the ESX driver where, when set to "no", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
VMX conversion parts rewritten to apply on top of previously merged
support for type='generated|static'
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When support for MAC addresses having a type='static|generated'
attribute was added in:
commit 454e5961ab
Author: Bastien Orivel <bastien.orivel@diateam.net>
Date: Mon Jul 13 16:28:53 2020 +0200
Add a type attribute on the mac address element
the VMX -> XML parser was not updated. As a result while we
accept the 'type' attribute on input, we never show it again
on 'output', so we loose information during the roundtrip.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With the current formatter, the XML snippets:
<interface type='bridge'>
<mac address='00:0c:29:dd:ee:fe' type='static'/>
<source bridge='br1'/>
</interface>
<interface type='bridge'>
<mac address='aa:bb:cc:dd:ee:fd' type='generated'/>
<source bridge='br2'/>
</interface>
result in
ethernet1.present = "true"
ethernet1.networkName = "br1"
ethernet1.connectionType = "bridged"
ethernet1.addressType = "static"
ethernet1.address = "00:0c:29:dd:ee:fe"
ethernet1.checkMACAddress = "false"
ethernet2.present = "true"
ethernet2.networkName = "br2"
ethernet2.connectionType = "bridged"
ethernet2.addressType = "static"
ethernet2.address = "aa:bb:cc:dd:ee:fd"
ethernet2.checkMACAddress = "false"
which is flawed, as both type='static' and type='generated' in the XML
turn into 'static' in the VMX config.
The existence of the 'static' attribute is further overriding whether
the checkMACAddress config option is set as a side effect.
Both these pieces of flawed logic were introduced in
commit 454e5961ab
Author: Bastien Orivel <bastien.orivel@diateam.net>
Date: Mon Jul 13 16:28:53 2020 +0200
Add a type attribute on the mac address element
which intentionally added the 'checkMACAddress' side effect based on
the 'type' attribute.
With this change, we're reverting the handling of checkMACAddress
to match what existed historically. The 'type' attribute now directly
maps to the addressType attribute, so the above config becomes:
ethernet1.present = "true"
ethernet1.networkName = "br1"
ethernet1.connectionType = "bridged"
ethernet1.addressType = "static"
ethernet1.address = "00:0c:29:dd:ee:fe"
ethernet2.present = "true"
ethernet2.networkName = "br2"
ethernet2.connectionType = "bridged"
ethernet2.addressType = "generated"
ethernet2.generatedAddress = "aa:bb:cc:dd:ee:fd"
ethernet2.generatedAddressOffset = "0"
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The mingw header define time() as a static inline function and this
causes a duplicate definition build failure. Since we're not using the
LD_PRELOAD at all on Mingw, we ideally wouldn't compile any of the
mock libraries. Rather than change the build system now though, this
just stubs out the offending function.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'libvirt-tmp-activewrite' bitmap is added during the 'pivot'
operation of block copy and active layer block commit operations
regardless of whether there are any bitmaps to merge, but was not
removed unless a bitmap was merged. This meant that subsequent attempts
to merge into the same image would fail.
Fix it by checking whether the 'libvirt-tmp-activewrite' would be used
by the code and don't skip the code which would delete it.
This is a regression introduced when we switched to the new code for
block commit in <20a7abc2d2d> and for block copy in <7bfff40fdfe5>. The
actual bug originates from <4fa8654ece>.
https://bugzilla.redhat.com/show_bug.cgi?id=1857735
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
g_new() is used in only 3 places. Switching them to g_new0() will do
no harm, reduces confusion, and helps me sleep better at night knowing
that all allocated memory is initialized to 0 :-) (Yes, I *know* that
in all three cases the associated memory is immediately assigned some
other value. Today.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When upgrading from a libvirt which didn't format private data of a
virStorageSource representing an iSCSI hostdev source, we might need to
generate some internal data so that the code still works as if it was
present in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming commit will need to add another flag for the function so
convert it to a bitwise-or'd array of flags to prevent having 4
booleans.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, we've used security_context_t for variables passed
to libselinux APIs. But almost 7 years ago, libselinux developers
admitted in their API that in fact, it's just a 'char *' type
[1]. Ever since then the APIs accept 'char *' instead, but they
kept the old alias just for API stability. Well, not anymore [2].
1: 9eb9c93275
2: 7a124ca275
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
If the host doesn't have a single IPv4 address assigned to any of
its interfaces, not even the loopback one, then virnetsockettest
will fail with
Cannot identify IPv4/6 availability
because, while the IPv6 bind attempt is conditional, the IPv4 one
is not, and in this case it will always fail.
This commit is better viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is only used in the ESX driver where, when set to "static", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All of the listed functions are available in libselinux version 2.2.
Our supported OSes start with version 2.5 so there is no need to check
it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The old code works correctly with make and running directly from shell
but it failed with Meson test suite where session ID and process group
are the same in both cases.
What changes in both cases is parent process ID so use that instead of
session ID.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All supported OSes have at least libselinux version 2.5 so it's safe
to drop this check.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was introduced together with clock-time gnulib module by commit
<d74e5a4dfc434d3a1d01856d013a7f50d910fa95> and removed from libvirt
by commit <86d223a762990c9d529065a2d3b30b6a00ea63dd>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Set FLAT_NAMESPACE_FLAGS to -Wl,-flat_namespace in configure only for
macOS and use it unconditionally in Makefiles.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability tracks whether QEMU is capable of defining HMAT
ACPI table for the guest.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
To cite ACPI specification:
Heterogeneous Memory Attribute Table describes the memory
attributes, such as memory side cache attributes and bandwidth
and latency details, related to the System Physical Address
(SPA) Memory Ranges. The software is expected to use this
information as hint for optimization.
According to our upstream discussion [1] this is exposed under
<numa/> as <cache/> under NUMA <cell/> and <latency> or
<bandwidth/> under numa/latencies.
1: https://www.redhat.com/archives/libvir-list/2020-January/msg00422.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU allows creating NUMA nodes that have memory only.
These are somehow important for HMAT.
With check done in qemuValidateDomainDef() for QEMU 2.7 or newer
(checked via QEMU_CAPS_NUMA), we can be sure that the vCPUs are
fully assigned to NUMA nodes in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This test case checks that expanding NUMA distance works. On
input we accept if only distance from A to B is specified. On the
output we format the B to A distance too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 82576d8f35 used a string "on" to enable the 'pmem' property.
This is okay for the command line visitor, but the property is declared
as boolean in qemu and thus it will not work when using QMP.
Modify the type to boolean. This changes the command line, but
fortunately the command line visitor in qemu parses both 'yes' and 'on'
as true for the property.
https://bugzilla.redhat.com/show_bug.cgi?id=1854684
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The semantics of the backup operation don't strictly require that all
disks being backed up are part of the same incremental part (when a disk
was checkpointed/backed up separately or in a different VM), or even
they may not have a previous checkpoint at all (e.g. when the disk
was freshly hotplugged to the vm).
In such cases we can still create a common checkpoint for all of them
and backup differences according to configuration.
This patch adds a per-disk configuration of the checkpoint to do the
incremental backup from via the 'incremental' attribute and allows
perform full backups via the 'backupmode' attribute.
Note that no changes to the qemu driver are necessary to take advantage
of this as we already obey the per-disk 'incremental' field.
https://bugzilla.redhat.com/show_bug.cgi?id=1829829
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Call the post-processing function so that we can validate that it does
the correct thing.
virDomainBackupAlignDisks requires disk definitions to be present so
let's fake them by copying disks from the backup definition and add one
extra disk 'vdextradisk'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Replace the output by a copy of the input file for further changes once
we start testing virDomainBackupAlignDisks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow enabling TLS for the NBD server used to do pull-mode backups. Note
that documentation already mentions 'tls', so this just implements the
schema and XML bits.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add fields for storing the aliases necessary to clean up the TLS env for
a backup job after it finishes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There are few internal fields of the backup XML. Propagate the
'internal' flag so that the test can verify the XML infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Avoid printing '0' size in case when we weren't able to determine the
backup size by adding a flag whether the size is valid and interlock
printing of the field according to the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a dummy secret so that we see what command line is generated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Store the required data in the private data of a storage source and
ensure that the 'alias' of the secret is formatted in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With the recent update of Fedora rawhide I've noticed
virnettlssessiontest and virnettlscontexttest failing with:
Our own certificate servercertreq-ctx.pem failed validation
against cacertreq-ctx.pem: The certificate uses an insecure
algorithm
This is result of Fedora changes to support strong crypto [1]. RSA
with 1024 bit key is viewed as legacy and thus insecure. Generate
a new private key then. Moreover, switch to EC which is not only
shorter but also not deprecated that often as RSA. Generated
using the following command:
openssl genpkey --outform PEM --out privkey.pem \
--algorithm EC --pkeyopt ec_paramgen_curve:P-384 \
--pkeyopt ec_param_enc:named_curve
1: https://fedoraproject.org/wiki/Changes/StrongCryptoSettings2
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If initializing test monitor in testQemuHotplugCpuPrepare()
fails, the control jumps to error label where
testQemuHotplugCpuDataFree() is called. But since the data->mon
is NULL due to aforementioned failure,
qemuMonitorTestGetMonitor() dereferences a NULL pointer leading
to a SIGSEGV.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add test with a ZPCI host device and a CCW memballoon device to ensure
that CCW address remains the default address assigned.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
1. Test for auto-generating uids while specifying valid fids
2. Test for auto-generating fids while specifying valid uids
3. Test for parse error while specifying a valid fid and an invalid
uid
4. Test for parse error while specifying two ZPCI devices with same
uid and fid addresses
5. Test for parse error when both uid and fid are set to zero
6. Test for error while specifying uid and not providing ZPCI
capability.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Let us fix the issues with zPCI address validation and auto-generation
on s390.
Currently, there are two issues with handling the ZPCI address
extension. Firstly, when the uid is to be auto-generated with a
specified fid, .i.e.:
...
<address type='pci'>
<zpci fid='0x0000001f'/>
</address>
...
we expect uid='0x0001' (or the next available uid for the domain).
However, we get a parsing error:
$ virsh define zpci.xml
error: XML error: Invalid PCI address uid='0x0000', must be > 0x0000
and <= 0xffff
Secondly, when the uid is specified explicitly with the invalid
numerical value '0x0000', we actually expect the parsing error above.
However, the domain is being defined and the uid value is silently
changed to a valid value.
The first issue is a bug and the second one is undesired behaviour, and
both issues are related to how we (in-band) signal invalid values for
uid and fid. So let's fix the XML parsing to do validation based on what
is actually specified in the XML.
The first issue is also related to the current code behaviour, which
is, if either uid or fid is specified by the user, it is incorrectly
assumed that both uid and fid are specified. This bug is fixed by
identifying when the user specified ZPCI address is incomplete and
auto-generating the missing ZPCI address.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The term "access control list" better describes the concept involved.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The term "permitted list" is a better choice for the filtering
logic applied.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When parsing domain XML post parse callbacks are run and one of
them might try and call API from a non-hypervisor driver (e.g.
just like qemuDomainDeviceNetDefPostParse() is doing - it calls a
network API). To avoid this in the test suite, set dummy drivers,
which renders all non-hypervisor APIs return error.
This mimics what qemuxml2argvtest does.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When using the DO_TEST_PARSE_ERROR() macro, a failure to parse the input
file is considered a successful test. However, if the input file is
totally missing, that should be distinguished from a parsing error and
not be treated as a test success.
The function virDomainDefParseFile() simply returns NULL for any parse
failure, including a missing file. So we need to explicitly check
whether the file exists first, and fail the test if it is missing.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Although a ramfb video device is not a PCI device, we don't currently
report an error for ramfb device definitions containing a PCI address.
However, a guest configured with such a device will fail to start:
# virsh start test1
error: Failed to start domain test1
error: internal error: qemu unexpectedly closed the monitor: 2020-06-16T05:23:02.759221Z qemu-kvm: -device ramfb,id=video0,bus=pcie.0,addr=0x1: Device 'ramfb' can't go on PCIE bus
A better approach is to reject any device definitions that contain PCI
addresses. While this is a change in behavior, any existing
configurations were non-functional.
https://bugzilla.redhat.com/show_bug.cgi?id=1847259
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
It's possible to use ramfb as the boot display of an assigned vgpu
device. This was introduced in 4b95738c, but unfortunately the attribute
was not formatted into the xml output for such a device. This patch
fixes that oversight and adds a xml2xml test to verify proper behavior.
https://bugzilla.redhat.com/show_bug.cgi?id=1847791
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The XML format used for QEMU capabilities is not required to be
stable across releases, as we invalidate the cache whenever the
libvirt binary changes.
We none the less always try to parse te entire XML file before
we do any validity checks. Thus if we change the format of any
part of the data, or change permitted values for enums, then
libvirtd logs will be spammed with errors.
These are not in fact errors, but an expected scenario.
This change makes the loading code validate the cache timestamp
against the libvirtd timestamp immediately. If they don't match
then we stop loading the rest of the XML file.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add tests for both supported scenarios: a single TPM Proxy and
a TPM Proxy with a regular TPM device in the same domain.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This tests aims to exercise how a TPM Proxy device can be
added in the domain, either alone or with a regular TPM
device. It also ensures that we do not allow bogus scenarios
to slip by.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A TPM Proxy device can coexist with a regular TPM, but the
current domain definition supports only a single TPM device
in the 'tpm' pointer. This patch replaces this existing pointer
in the domain definition to an array of TPM devices.
All files that references the old pointer were adapted to
handle the new array instead. virDomainDefParseXML() TPM related
code was adapted to handle the parsing of an extra TPM device.
TPM validations after this new scenario will be updated in
the next patch.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This trivial rework is aimed to reduce the amount of line changes
made by the next patch, when 'def->tpm' will become a 'def->tpms'
array.
Instead of using a 'switch' where only the VIR_DOMAIN_TPM_TYPE_EMULATOR
label does something, use an 'if' clause instead.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Expose the TPM Proxy support for PPC64 guests by creating a new
cap called QEMU_CAPS_DEVICE_SPAPR_TPM_PROXY.
This device is part of the machinery the guest need to orchestrate
with the PPC64 Ultravisor the transition to the Secure VM (SVM)
mode. Inside QEMU, this device will be used with the H_TPM_COMM
hypercall to connect with the TPM Resource Manager, enabling
the guest to open and close TPM sessions with the host TPM.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Format the address width attribute. Depending on the version of
QEMU it is named 'aw-bits' or 'x-aw-bits'.
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a new aw_bits attribute to the iommu device to control
the address width of the intel-iommu
Signed-off-by Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Integrate both 'disk-hostdev-scsi-virtio-iscsi-auth-AES' and
'hostdev-scsi-virtio-iscsi-auth' as the new test infrastructure tests
both legacy and 'secret' object cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can add the iSCSI hostdevs to the same test file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu-2.8 didn't yet support QEMU_CAPS_ISCSI_PASSWORD_SECRET. This
version will allow integrating multiple test cases into one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modernize the current state to the pre-blockdev version of qemu to
minimize changes. Later patch will add a 'latest' case too.
Additionally this removes duplicated call of the same test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can add the authenticated iSCSI hostdevs to the same test file.
Additionally this now covers passing secret via the 'secret' object
rather than on the command line.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can add the iSCSI hostdevs to the same test file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
"hostdev-scsi-readonly" case tests the readonly disk with a virtio-scsi
controller. Add it for the 'lsi' controller test as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
