libvirt previously assigned nearly all devices to a "hotpluggable"
legacy PCI slot even on machines with a PCIe root bus (and even though
most such machines don't even support hotplug on legacy PCI slots!)
Forcing all devices onto legacy PCI slots means that the domain will
need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a
pci-bridge (to provide hotpluggable legacy PCI slots which, again,
usually aren't hotpluggable anyway).
To help reduce the need for these legacy controllers, this patch tries
to assign virtio-1.0-capable devices to PCIe slots whenever possible,
by setting appropriate connectFlags in
virDomainCalculateDevicePCIConnectFlags(). Happily, when that function
was written (just a few commits ago) it was created with a
"virtioFlags" argument, set by both of its callers, which is the
proper connectFlags to set for any virtio-*-pci device - depending on
the arch/machinetype of the domain, and whether or not the qemu binary
supports virtio-1.0, that flag will have either been set to PCI or
PCIe. This patch merely enables the functionality by setting the flags
for the device to whatever is in virtioFlags if the device is a
virtio-*-pci device.
NB: the first virtio video device will be placed directly on bus 0
slot 1 rather than on a pcie-root-port due to the override for primary
video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not
to change that is a topic of discussion, but this patch doesn't change
that particular behavior.
NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root
complex) does *not* support hotplug, this means that suitable
controllers must also be in the config (i.e. either pcie-root-port, or
pcie-downstream-port). For now, libvirt doesn't add those
automatically, so if you put virtio devices in a config for a qemu
that has PCIe-capable virtio devices, you'll need to add extra
pcie-root-ports yourself. That requirement will be eliminated in a
future patch, but for now, it's simple to do this:
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-root-port'/>
...
Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
This patch cleans up the connect flags for certain types/models of
devices that aren't PCI to return 0. In the future that may be used as
an indicator to the caller about whether or not a device needs a PCI
address. For now it's just ignored, except for in
virDomainPCIAddressEnsureAddr() - called during device hotplug - (and
in some cases actually needs to be re-set to PCI|HOTPLUGGABLE just in
case someone (in some old config) has manually set a PCI address for a
device that isn't PCI.
Before now, all the qemu hotplug functions assumed that all devices to
be hotplugged were legacy PCI endpoint devices
(VIR_PCI_CONNECT_TYPE_PCI_DEVICE). This worked out "okay", because all
devices *are* legacy PCI endpoint devices on x86/440fx machinetypes,
and hotplug didn't work properly on machinetypes using PCIe anyway
(hotplugging onto a legacy PCI slot doesn't work, and until commit
b87703cf any attempt to manually specify a PCIe address for a
hotplugged device would be erroneously rejected).
This patch makes all qemu hotplug operations honor the pciConnectFlags
set by the single all-knowing function
qemuDomainDeviceCalculatePCIConnectFlags(). This is done in 3 steps,
but in a single commit since we would have to touch the other points
at each step anyway:
1) add a flags argument to the hypervisor-agnostic
virDomainPCIAddressEnsureAddr() (previously it hardcoded
..._PCI_DEVICE)
2) add a new qemu-specific function qemuDomainEnsurePCIAddress() which
gets the correct pciConnectFlags for the device from
qemuDomainDeviceConnectFlags(), then calls
virDomainPCIAddressEnsureAddr().
3) in qemu_hotplug.c replace all calls to
virDomainPCIAddressEnsureAddr() with calls to
qemuDomainEnsurePCIAddress()
So in effect, we're putting a "shim" on top of all calls to
virDomainPCIAddressEnsureAddr() that sets the right pciConnectFlags.
Set pciConnectFlags in each device's DeviceInfo and then use those
flags later when validating existing addresses in
qemuDomainCollectPCIAddress() and when assigning new addresses with
qemuDomainPCIAddressReserveNextAddr() (rather than scattering the
logic about which devices need which type of slot all over the place).
Note that the exact flags set by
qemuDomainDeviceCalculatePCIConnectFlags() are different from the
flags previously set manually in qemuDomainCollectPCIAddress(), but
this doesn't matter because all validation of addresses in that case
ignores the setting of the HOTPLUGGABLE flag, and treats PCIE_DEVICE
and PCI_DEVICE the same (this lax checking was done on purpose,
because there are some things that we want to allow the user to
specify manually, e.g. assigning a PCIe device to a PCI slot, that we
*don't* ever want libvirt to do automatically. The flag settings that
we *really* want to match are 1) the old flag settings in
qemuDomainAssignDevicePCISlots() (which is HOTPLUGGABLE | PCI_DEVICE
for everything except PCI controllers) and 2) the new flag settings
done by qemuDomainDeviceCalculatePCIConnectFlags() (which are
currently exactly that - HOTPLUGGABLE | PCI_DEVICE for everything
except PCI controllers).
The lowest level function of this trio
(qemuDomainDeviceCalculatePCIConnectFlags()) aims to be the single
authority for the virDomainPCIConnectFlags to use for any given device
using a particular arch/machinetype/qemu-binary.
qemuDomainFillDevicePCIConnectFlags() sets info->pciConnectFlags in a
single device (unless it has no virDomainDeviceInfo, in which case
it's a NOP).
qemuDomainFillAllPCIConnectFlags() sets info->pciConnectFlags in all
devices that have a virDomainDeviceInfo
The latter two functions aren't called anywhere yet. This commit is
just making them available. Later patches will replace all the current
hodge-podge of flag settings with calls to this single authority.
dom xml generated on begin step should be passed
to perform step in VIR_MIGRATE_PARAM_DEST_XML parameter.
Otherwise 'XML error: failed to parse xml document' is
raised on destination host as dom xml is NULL.
Signed-off-by: Pavel Glushchak <pglushchak@virtuozzo.com>
Although there already was an effort (b620bdee) to replace vshPrint occurrences
with vshPrintExtra due to '--quiet' flag, there were still some leftovers. So
this patch fixes them, hopefully for good.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1356881
Signed-off-by: Erik Skultety <eskultet@redhat.com>
There were a few places in our virsh* code where instead of calling vshError
on failure we called vshPrint.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Coverity identified that this variable might be leaked. And it's
right. If an error occurred and we have to roll back the control
jumps to try_remove label where we save the current error (see
0e82fa4c34 for more info). However, inside the code a jump onto
other label is possible thus leaking the error object.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use the newly introduced close callback helpers to make the code look just a
bit cleaner and more importantly, to fix the following memleak regarding a
dangling virAdmConnect object reference caused by assigning NULL to the close
callback data once the catch-disconnect routine used the callback followed
by a comparison of NULL to the originally defined close callback (which at that
moment had already been NULL'd by remoteAdminClientCloseFunc) in
virAdmConnectCloseCallbackUnregister.
717 (88 direct, 629 indirect) bytes in 1 blocks are definitely lost record
110 of 141
at 0x4C2A988: calloc (vg_replace_malloc.c:711)
by 0x530696F: virAllocVar (viralloc.c:560)
by 0x53689E6: virObjectNew (virobject.c:193)
by 0x5368B5E: virObjectLockableNew (virobject.c:219)
by 0x4E3E7EE: virAdmConnectNew (datatypes.c:900)
by 0x4E398BB: virAdmConnectOpen (libvirt-admin.c:220)
by 0x10D3E3: vshAdmConnect (virt-admin.c:161)
by 0x10D624: vshAdmReconnect (virt-admin.c:215)
by 0x10DB0A: cmdConnect (virt-admin.c:353)
by 0x11288F: vshCommandRun (vsh.c:1313)
by 0x10FDB6: main (virt-admin.c:1439)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1357358
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Well, there were three different spots where closeCallback->freeCallback was
called, not looking the same --> potential for bugs - and there indeed is a bug
with refcounting of the @conn object. So this patch partially follows the path
set by commit 24dbb69f by introducing some close callback helpers both to
replace all the spots where we call clean the close callback data with a
dedicated function and to be able to fix the refcounting bug causing a memleak.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The only place we change the @conn object is actually virAdmConnectOpen
routine, thus at the moment we don't really need to lock it, given the fact that
what we're trying to do here is to change the closeCallback object which is a
lockable object itself, so that should be enough to avoid races.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
First, since commit 834c5720 the error reporting within the vshErrorHandler
doesn't work because there was a lot of renaming going on (dull mechanical
renaming without much thinking about it, yep - shame on me) and so the original
env variable VIRSH_DEBUG got renamed to VSH_DEBUG which we don't support nor
document anywhere. Second, by specifying this env variable, the last libvirt
error gets reported twice despite the fact we say the error reporting should be
deferred until the command finishes, and last but not least the vintage code's
logic is a bit 'odd', since the error would get reported iff the env variable
is set, even if the value should be equal to our DEFAULT value in which case it
doesn't make sense that we behave differently when an env variable is set to
some value and when there's no env variable at all but we use the same value
automatically as default.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In particular, pull in gnulib's fix for the broken SIZE_MAX on s390.
* .gnulib: Update to latest.
* bootstrap: Resync to upstream.
Signed-off-by: Eric Blake <eblake@redhat.com>
As was suggested in an earlier review comment[1], we can
catch some additional code points by cleaning up how we use the
hostdev subsystem type in some switch statements.
[1] End of https://www.redhat.com/archives/libvir-list/2016-September/msg00399.html
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unlike the other error messages in vshInitDebug, this one relied on a hardcoded
name of a variable instead of using the prefix of the tool calling the init
routine.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1393854
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The default browser line height is fine. Overriding it
causes <pre> blocks inside a <dl> to have enourmous
spacing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The XML format main page has never had any content in it,
relying on the left navbar to provide links to the XML
schema pages. Since the navbar is gone, the page needs
to have some content created, otherwise it is useless.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove a bunch of pages which are either outdated, have no
content, or duplicate content better described elsewhere
in the site or wiki.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A combination of the index page, top nav bar and docs.html page
provide links to all pages on the site. The left hand nav bar
is thus redundant and can be removed to provide a simpler style
for the site.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The docs page is currently completely empty. Fill it in with
links to the various documentation, categorized as to whether
it is targetting people deploying libvirt, application
developers using libvirt, or people working on libvirt
itself.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Previously the download page only covered the main libvirt
module and the app dev guide. Expand it to provide direct
links to all artifacts published by the project, whether
the main library, language bindings, docs, or testing.
Tweak the top table styling to better fit in with new
branding.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The front page contains a bunch of content that is either
outdated (eg links to libvirt qpid) or not particularly
useful (links to vendor hypervisor sites).
This rewrites it to be more directly useful to visitors,
providing a updated intro to libvirt project, direct
links to key pieces of website content (new contributors
guide, security process, bug reporting, XML formats), and
feed showing recent 5 blog posts on the virt tools planet.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This reverts commit 1f29f3da06.
Assuming <dt> is always used to document symbols is way too
broad, requiring far too many exemptions to be marked to
avoid syntax check rules.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
