Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In near future the storage pool object lock will be released
during startPool and buildPool callback (in some backends). But
this means that another thread may acquire the pool object lock
and change its definition rendering the former thread access not
only stale definition but also access freed memory
(virStoragePoolObjAssignDef() will free old def when setting a
new one).
One way out of this would be to have the pool appear as active
because our code deals with obj->def and obj->newdef just fine.
But we can't declare a pool as active if it's not started or
still building up. Therefore, have a boolean flag that is very
similar and forces virStoragePoolObjAssignDef() to store new
definition in obj->newdef even for an inactive pool. In turn, we
have to move the definition to correct place when unsetting the
flag. But that's as easy as calling
virStoragePoolUpdateInactive().
Technically speaking, change made to
storageDriverAutostartCallback() is not needed because until
storage driver is initialized no storage API can run therefore
there can't be anyone wanting to change the pool's definition.
But I'm doing the change there for consistency anyways.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This flag can be used to denote that the definition we're trying
to assign to a pool object is live definition and thus the
inactive definition should be saved into ->newDef.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate storage pool definition assignment into a function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There will be more boolean information that we want to pass to
this function. Instead of having them in separate arguments per
each one, use @flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function is doing much more than plain assigning pool
definition to a pool object. Rename it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turns out there's one callback that might remove a storage pool
during its run: storagePoolUpdateAllState() call
storagePoolUpdateStateCallback() which may call
virStoragePoolUpdateInactive() which in turn may call
virStoragePoolObjRemove(). Problem is that the
UpdateStateCallback() sees a storage pool object with just two
references: one for each hash table holding the object. If the
function ends up calling ObjRemove() then upon removing the
object from hash tables those references are gone and thus any
subsequent call touching the object is invalid.
The solution to this problem is to grab reference for the object
we are running iterator with.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fact that we're removing a pool object from the list of pools
doesn't mean we want to unlock it. It violates locking policy
too as object locking and unlocking is not done on the same
level.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add pool list type flag VIR_CONNECT_LIST_STORAGE_POOLS_ISCSI_DIRECT,
which was forgotten when introducing iscsi-direct pool at f0bf1be3.
https://bugzilla.redhat.com/show_bug.cgi?id=1726609
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Due to the way that our virObjectUnref() is written it's not
possible that a NULL is passed into *Dispose() function. However,
some functions check for that regardless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If virStoragePoolObjNew() fails to create new volume object list
then virObjectUnref() is called and since refcounter is 1 then
virStoragePoolObjDispose() is called which in turn calls
virStoragePoolObjClearVols() which in turn dereferences
obj->volumes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When dealing with internal paths we don't need to worry about
whether or not suffixes are lowercase since we have full control
over them, which means we can avoid performing case-insensitive
string comparisons.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
A few trivial whitespace changes are squashed in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
In addition to the obvious s/File/String/, also tweak the name
to make it clear that the presence of the suffix is verified
using case-insensitive comparison.
A few trivial whitespace changes are squashed in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>). VIR_ONCE_GLOBAL_INIT is almost
exclusively called without an ending semicolon, but let's
standardize on using one like the other macros.
Add a dummy struct definition at the end of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
There's a lot of stuff going on in src/conf/nodedev_conf which is
sometimes not directly related to config and we're not really consistent
with putting only parser/formatter related stuff here, e.g. like we do
for domains. So, let's start simply by adding a new module
node_device_util containing some of the helpers. Unfortunately, even
though these helpers tend to open a secondary driver connection and would
be much therefore better suited as a nodedev driver module, we can't do
that without pulling headers from the driver into conf/ and that's wrong
because we want conf/ to stay driver-agnostic.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Just like a few commits earlier, checking for pool source
duplicates and unlocking pools list afterwards is a buggy
pattern. The check must go into virStoragePoolObjAssignDef.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The @conn argument is needed only to do some source matching in
case of iSCSI source. Anyway, it's used just for node device
driver and as such can be replaced with virGetConnectNodeDev().
At the same time, the @conn struct member is dropped from
_virStoragePoolObjFindDuplicateData.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This function is going to be made static in used in
virStoragePoolObjAssignDef(). Therefore move it and all the
static functions it calls a few lines up.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Even though we do some checking it is not as thorough as it
should be. We already have virStoragePoolObjIsDuplicate but the
way we use it is a typical TOCTOU. Imagine two threads trying to
define two pools with the same name but different UUIDs. With the
current code neither of them finds a duplicate and thus proceed
to virStoragePoolObjAssignDef where only names are compared.
Therefore both threads succeed which is obviously wrong.
We should check for duplicates where we care for them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This function is going to be made static in used in
virStoragePoolObjAssignDef(). Therefore move it a few lines up.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
name match functions to be the vir prefix and interface name followed by ObjMatch
ex. for virNetworkObjListExport, the match function is named
virNetworkObjMatch
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
name functions to be the name of the export function followed by Callback
ex. for virInterfaceObjListExport, the callback function is named
virInterfaceObjListExportCallback
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
name structs to be the name of the Export function followed by Data
also tweak definitions to follow standard struct definition pattern
ex. for virInterfaceObjListExport, the struct is defined as follows:
typedef struct _virInterfaceObjListExportData virInterfaceObjListExportData;
typedef virInterfaceObjListExportData *virInterfaceObjListExportDataPtr;
struct _virInterfaceObjListExportData {...};
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introducing the pool as a noop. Integration inside the build
system. Implementation will be in the following commits.
Signed-off-by: Clementine Hayat <clem@lse.epita.fr>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Remove the locks since they are unnecessary and would cause
a hang for a driver reload/restart when a transient pool was
previously active as a result of the call:
virStoragePoolUpdateInactive:
...
if (!virStoragePoolObjGetConfigFile(obj)) {
virStoragePoolObjRemove(driver->pools, obj);
...
stack trace:
Thread 17 (Thread 0x7fffcc574700 (LWP 12465)):
...pthread_rwlock_wrlock
...virRWLockWrite
...virObjectRWLockWrite
...virStoragePoolObjRemove
...virStoragePoolUpdateInactive
...storagePoolUpdateStateCallback
...virStoragePoolObjListForEachCb
...virHashForEach
...virStoragePoolObjListForEach
...storagePoolUpdateAllState
...storageStateInitialize
...virStateInitialize
...daemonRunStateInit
...virThreadHelper
...start_thread
...clone
Introduced by commit id 4b2e0ed6e3.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
So far we are repeating the following lines over and over:
if (!(virSomeObjectClass = virClassNew(virClassForObject(),
"virSomeObject",
sizeof(virSomeObject),
virSomeObjectDispose)))
return -1;
While this works, it is impossible to do some checking. Firstly,
the class name (the 2nd argument) doesn't match the name in the
code in all cases (the 3rd argument). Secondly, the current style
is needlessly verbose. This commit turns example into following:
if (!(VIR_CLASS_NEW(virSomeObject,
virClassForObject)))
return -1;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Alter the volume logic to use the hash tables instead of forward
linked lists. There are three hash tables to allow for fast lookup
by name, target.path, and key.
Modify the virStoragePoolObjAddVol to place the object in all 3
tables if possible using self locking RWLock on the volumes object.
Conversely when removing the volume, it's a removal of the object
from the various hash tables.
Implement functions to handle remote ForEach and Search Volume
type helpers. These are used by the disk backend in order to
facilitate adding a primary, extended, or logical partition.
Implement the various VolDefFindBy* helpers as simple (and fast)
hash lookups. The NumOfVolumes, GetNames, and ListExport helpers
are all implemented using standard for each hash table calls.
Prepare for hash table volume lists by creating the object infrastructure
for a Volume Object and Volume Object List
The _virStorageVolObj will contain just a pointer to the "current"
(and live) volume definition.
The _virStorageVolObjList will contain three hash tables, one for
each of the lookup options allowed for a volume.
Now that we have a private storage pool list, we can take the next
step and convert to using objects. In this case, we're going to use
RWLockable objects (just like every other driver) with two hash
tables for lookup by UUID or Name.
Along the way the ForEach and Search API's will be adjusted to use
the related Hash API's and the various FindBy functions altered and
augmented to allow for HashLookup w/ and w/o the pool lock already
taken.
After virStoragePoolObjRemove we will need to virObjectUnref(obj)
after to indicate the caller is "done" with it's reference. The
Unlock occurs during the Remove.
The NumOf, GetNames, and Export functions all have their own callback
functions to return the required data and the FindDuplicate code
can use the HashSearch function callbacks.
Create an API to search through the storage pool objects looking for
a specific truism from a callback API in order to return the specific
storage pool object that is desired.
Create an API to walk the pools->objs[] list in order to perform a
callback function for each element of the objs array that doesn't care
about whether the action succeeds or fails as the desire is to run the
code over every element in the array rather than fail as soon as or if
one fails.
For now it'll just call the virStoragePoolObjUnlock, but a future
adjustment will do something different. Since the new API will check
for a NULL object before the Unlock call, callers no longer need to
check for NULL before calling.
The virStoragePoolObjUnlock is now private/static to virstorageobj.c
with a short term forward reference.
Modify virStoragePoolObjGetAutostartLink and
virStoragePoolObjGetConfigFile to return "const char *"
since that's how both are used and to ensure no one
tries to VIR_FREE the result.
Introduce virStoragePoolObjForEachVolume to scan each volume
calling the passed callback function until all volumes have been
processed in the storage pool volume list, unless the callback
function returns an error.
Introduce virStoragePoolObjSearchVolume to search each volume
calling the passed callback function until it returns true
indicating that the desired volume was found.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Create/use virStoragePoolObjAddVol in order to add volumes onto list.
Create/use virStoragePoolObjRemoveVol in order to remove volumes from list.
Create/use virStoragePoolObjGetVolumesCount to get count of volumes on list.
For the storage driver, the logic alters when the volumes.obj list grows
to after we've fetched the volobj. This is an optimization of sorts, but
also doesn't "needlessly" grow the volumes.objs list and then just decr
the count if the virGetStorageVol fails.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Create/use a helper to perform object allocation.
Adjust storagevolxml2argvtest.c in order to use the allocator and
setting of the obj->def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation for making a private object, create accessor API's for
consumer storage functions to use:
virStoragePoolObjGetDef
virStoragePoolObjSetDef
virStoragePoolObjGetNewDef
virStoragePoolObjDefUseNewDef
virStoragePoolObjGetConfigFile
virStoragePoolObjSetConfigFile
virStoragePoolObjGetAutostartLink
virStoragePoolObjIsActive
virStoragePoolObjSetActive
virStoragePoolObjIsAutostart
virStoragePoolObjSetAutostart
virStoragePoolObjGetAsyncjobs
virStoragePoolObjIncrAsyncjobs
virStoragePoolObjDecrAsyncjobs
Signed-off-by: John Ferlan <jferlan@redhat.com>
Alter the virStoragePoolObjNumOfVolumes, virStoragePoolObjVolumeGetNames,
and virStoragePoolObjVolumeListExport APIs to take a virStoragePoolObjPtr
instead of the &obj->volumes and obj->def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
