If QEMU supports multi boot device make use of it instead of using the
single boot device machine parameter.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Let us introduce the xml and reply files for QEMU 9.2.0 on s390x.
A QEMU at commit v9.1.0-1348-g11b8920ed2 was used to generate this data.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add capability QEMU_CAPS_VIRTIO_CCW_DEVICE_LOADPARM to detect multi boot
device support in QEMU by checking the virtio-blk-ccw device property
existence of loadparm.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
If a Q35 domain has huge number of vCPUS (over 255, currently), then
it needs IOMMU with Extended Interrupt Mode enabled (see check in
qemuValidateDomainVCpuTopology()).
Well, we already add some devices and to other tricks when
parsing new domain XML. Might as well add IOMMU device if above
condition is met.
Resolves: https://issues.redhat.com/browse/RHEL-65844
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a Q35 domain has huge number of vCPUS (over 255, currently), then
it needs IOMMU with Extended Interrupt Mode enabled (see check in
qemuValidateDomainVCpuTopology()).
Well, we already add some devices and to other tricks when
parsing new domain XML. Might as well turn the EIM on for IOMMU
device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With upcoming v0.10 swtpm (commit
aa483aeb6d),
file locking with "lock" option is now supported and reflected in
"tpmstate-opt-lock" capability.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Learn to parse a directory for the TPM state.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Learn to parse a file path for the TPM state.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Domain capabilities include information about support for various
devices and models.
Panic devices are not included in the output which means that management
applications need to include the logic for choosing the right device
model or request a default model and try defining such a domain.
Add reporting of panic device models into the domain capabilities based
on the logic in qemuValidateDomainDefPanic() and also report whether
panic devices are supported based on whether at least one model is
supported. That way consumers of the domain capability XML can
differentiate between libvirt not reporting the panic device models or
no model being supported.
Resolves: https://issues.redhat.com/browse/RHEL-65187
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit 42ab0148dd.
This patch was supposed to fix the checksum of dhcp response packets
by setting it to 0 (because having a non-0 but incorrect checksum was
causing the packets to be droppe on FreeBSD guests).
Early testing was positive, but after the patch was pushed upstream
and more people could test it, it turned out that while it fixed the
dhcp checksum problem for virtio-net interfaces on FreeBSD and
OpenBSD, it also *broke* dhcp checksums for the e1000 emulated NIC on
*all* guests (but not e1000e).
So we're reverting this fix and looking for something more universal
to be included in the next release.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Many years ago (April 2010), soon after "vhost" in-kernel packet
processing was added to the virtio-net driver, people running RHEL5
virtual machines with a virtio-net interface connected via a libvirt
virtual network noticed that when vhost packet processing was enabled,
their VMs could no longer get an IP address via DHCP - the guest was
ignoring the DHCP response packets sent by the host.
(I've been informed by danpb that the same issue had been encountered,
and "fixed" even earlier than that, in 2006, with Xen as the
hypervisor.)
The "gory details" of the 2010 discussion are chronicled here:
https://lists.isc.org/pipermail/dhcp-hackers/2010-April/001835.html
but basically it was because packet checksums weren't being fully
computed on the host side (because QEMU on the host and the NIC driver
in the guest had agreed between themselves to turn off checksums
because they were unnecessary due to the "link" between the two being
entirely in local memory rather than an error-prone physical cable),
but
1) a partial checksum was being put into the packets at some point by
"someone"
2) the "don't use checksums" info was known by the guest kernel, which
would properly ignore the "bad" checksum), and
3) the packets were being read by the dhclient application on the
guest side with a "raw" socket (thus bypassing the guest kernel UDP
processing that would have known the checksum was irrelevant and
ignore it)),
The "fix" for this ended up being two-tiered:
1) The ISC DHCP package (which contains the aforementioned dhclient
program) made a fix to their dhclient code which caused it to accept
packets anyway even if they didn't have a proper checksum (NB: that's
not a full explanation, and possibly not accurate). This remedied the
problem for guests with an updated dhclient. Here is the code with the
fix to ISC DHCP:
https://github.com/isc-projects/dhcp/blob/master/common/packet.c#L365
This eliminated the issue for any new/updated guests that had the
fixed dhclient, but it didn't solve the problem for existing/old guest
images that didn't/couldn't get their dhclient updated. This brings us
to:
2) iptables added a new "CHECKSUM" target and "--checksum-fill"
action:
http://patchwork.ozlabs.org/patch/58525/
and libvirt added an iptables rule for each virtual network to match
DHCP response packets and perform --checksum-fill. This way by the
time dhclient on the guest read the raw packet, the checksum would be
corrected, and the packet would be accepted. This was pushed upstream
in libvirt commit v0.8.2-142-gfd5b15ff1a.
The word at the time from those more knowledgeable than me was that
the bad checksum problem was really specific to ISC's dhclient running
on Linux, and so once their fix was in use everywhere dhclient was
used, bad checksums would be a thing of the past and the
--checksum-fill iptables rules would no longer be needed (but would
otherwise be harmless if they were still there).
(Plot twist: the dhclient code in fix (1) above apparently is on a
Linux-only code path - this is very important later!)
Based on this information (and also due to the opinion that fixing it
by having iptables modify the packet checksum was really the wrong way
to permanently fix things, i.e. an "ugly hack"), the nftables
developers made the decision to not implement an equivalent to
--checksum-fill in nftables. As a result, when I wrote the nftables
firewall backend for libvirt virtual networks earlier this year, it
didn't add in any rule to "fix" broken UDP checksums (since there was
apparently no equivalent in nftables and, after all, that was fixed
somewhere else 14 years ago, right???)
But last week, when Rich Jones was doing routine testing using a Fedora
40 host (the first Fedora release to use the nftables backend of libvirt's
network driver by default) and a FreeBSD guest, for "some strange
reason", the FreeBSD guest was unable to get an IP address from DHCP!!
https://www.spinics.net/linux/fedora/libvirt-users/msg14356.html
A few quick tests proved that it was the same old "bad checksum"
problem from 2010 come back to haunt us - it wasn't a Linux-only issue
after all.
Phil Sutter and Eric Garver (nftables people) pointed out that, while
nftables doesn't have an action that will *compute* the checksum of a
packet, it *does* have an action that will set the checksum to 0, and
suggested we try adding a "zero the checksum" rule for dhcp response
packets to our nftables ruleset. (Why? Because a checksum value of 0
in a IPv4 UDP packet is defined by RFC768 to mean "no checksum
generated", implying "checksum not needed"). It turns out that this
works - dhclient properly recognizes that a 0 checksum means "don't
bother with the checksum", and accepts the packet as valid.
So to once again fix this timeless bug, this patch adds such a
checksum zeroing rule to the nftables rules setup for each virtual
network.
This has been verified (on a Fedora 40 host) to fix DHCP with FreeBSD
and OpenBSD guests, while not breaking it for Fedora or Windows (10)
guests.
Fixes: b89c4991da
Reported-by: Rich Jones <rjones@redhat.com>
Fix-Suggested-by: Eric Garver <egarver@redhat.com>
Fix-Suggested-by: Phil Sutter <psutter@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Let us introduce the xml and reply files for QEMU 9.1.0 on s390x.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
When a CPU model is reported as usable='no' an additional
<blockers model='...'> element is added for that CPU model to show which
features are missing for the CPU model to become usable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We currently create stub 'setcon', 'setcon_raw' and 'security_disable'
APIs in the securityselinuxhelper.c mock, which set env variables to
control how other mock'd libselinux APIs respond. These stubs merely
set some env variables, and we have no need to call these stubs from
the library code, only test code.
The 'security_disable' API is now deprecated in libselinux, so we
stubbing it generates compiler warnings. Rather than workaround that,
just stop stubbing these APIs and set the required env variables
directly. With this change, we now only mock API calls we actually
use from the library code.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce capabilities based on qemu commit 'v9.1.0-803-g05adb38839'.
Notable changes:
- new 9.2 machine types
- 'gluster' disk backend deprecated
- 'reconnect' option of chardevs replaced by 'reconnect-ms'
- this includes test output changes happening in this patch
as 'reconnect' was deprecated in the same patch that
introduced 'reconnect-ms' and thus couldn't be changed
incrementally
- cpu flags:
- 'ibpb-brtype' added
- 'vmx-exit-secondary-ctls' added
- 'vmx-entry-load-rtit-ctl' added
- migration capabilities/parameters
- 'zero-blocks' deprecated
- 'multifd-qatzip-level' added
- 'pty' chardev backend gained 'path' attribute
- 'cris' and 'she4b' arches removed (from 'query-cpus-fast' data)
- 'copy-before-write' block filter gained 'min-cluster-size'
- 'vhost-user-scmi', 'serial-mm' removed
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Upcoming qemu-9.2 will deprecate 'reconnect' in favor of 'reconnect-ms'.
Add pinned versions so that we test also the old syntax.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
qemu-9.2 will deprecate the 'reconnect' field in favor of
'reconnect-ms'. As libvirt currently doesn't track the timeouts in
milliseconds we simply convert them to avoid use of the deprecated
field.
Quite a lot of churn is caused by the need to plumb 'qemuCaps' into the
chardev props generator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The gluster protocol will be deprecated by qemu-9.2. Convert the tests
to NBD as it's trivial and the test cases are not concerned with a
specific protocol.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Convert one of the layers of the backing chain to 'nfs' to test if users
don't set the identity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The gluster protocol backend will be deprecated as of qemu-9.2. Allow
it for now in the QMP schema validator and mark them to be dropped once
gluster is removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The gluster protocol backend will be deprecated as of qemu-9.2. Allow it
for now in the QMP schema validator and mark them to be dropped once
gluster is removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Gluster will be deprecated in the upcoming qemu version thus we need to
replace the network protocol by something which will stay supported so
that we can keep the tests around.
Convert all cases referencing 'gluster' to 'nbd'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Store the names of internal snapshots present in supported images in the
data we dump from 'query-named-block-nodes' so that the upcoming changes
to the internal snapshot code can access it.
To test this we use the bitmap detection test cases which can be easily
extended to dump this data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The 'snapshot-save/delete' QMP commands were introduced in QEMU 6.0.0,
so we add a compatible capability to check if target QEMU binary supports it.
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This feature is called "vmx-invept-single-context-noglobals" in QEMU and
our CPU map even contains the appropriate alias. But we failed to
actually translate the name when talking to QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The script is used to create data files for cputest from QEMU replies.
By ignoring aliases we might end up thinking a feature is not enabled by
QEMU just because its name differs from the primary one in the CPU map.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virFileIsSharedFS() is the function that ultimately decides
whether a filesystem should be considered shared, but the list
of manually configured shared filesystems is part of the QEMU
driver's configuration, so we need to pass the information
through several layers in order to make use of it.
Note that with this change the list is propagated all the way
through, but its contents are still ignored, so the behavior
remains the same for now.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The attribute dma_translation is only supported by intel-iommu device.
Report an error when it is used for the other iommu devices.
Fixes: 6866f958c1
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently, an array of libxl_string_list (char **) or in other words,
a triple char pointer is initialized. This is dereferenced to a char ** type
and stored in serial_list, which is NULL at this point. There is an attempt to
reference an element of this serial_list when making a call to
libxlMakeChrdevStr which causes a segmentation fault.
To fix this, we simply allocate an array of char * instead of
libxl_string_list.
This patch also adds testcases to extend coverage over both single serial and
multiple serial cases.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The only caller of this function is doing some additional filtering so
it's useful if the filtering function was able to do so internally.
Introduce a 'type' parameter which will optionally filter the results by
type and extend the testsuite to cover this scenario.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The 'unstable' feature is present on any schema member which was not yet
finalized in qemu. Use it to refuse such fields/commands in qemu as they
are possibly subject to change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Upcoming patch will add more features we care to check. Rename the
function to 'testQEMUSchemaValidateFeatures'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU uses Linux extensions to madvise() to include/exclude guest
memory from core dump. These are obviously not available
everywhere. Currently, users have two options:
1) configure <memory dumpCore=''/> in domain XML, or
2) configure dump_guest_core in qemu.conf
While these work, they may harm user experience as "things just
don't work" out of the box. Provide sane default in
virQEMUDriverConfigNew() so neither of two options is required.
To have predictable results in tests, explicitly set
cfg->dumpGuestCore to false in qemuTestDriverInit() (which
creates cfg object for tests).
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/679
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This way we keep the path for each running VM.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This way we _can_ (but do not, yet) remember the memory backing path for
running domains even after configuration change and daemon restart.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Ensure both are required during this series to make bisecting smooth.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Some tests depend on WITH_YAJL even though the actual library used
does not make a difference. Introduce WITH_JSON for a smoother
transition.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Some earlier versions of json-c format empty elements differently.
Run the tests who use the pretty formatting for readability and
diffability through a function that unifies the output.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
QEMU supports only 'raw' and 'telnet' in the
<protocol type='telnets'/>
element. Reject 'telnets' and 'tls'. TLS transport for qemu chardevs is
configured via "tls='yes'" attribute added to the "<source>" element
instead, so this prevents potential misconfig as the value would be
silently accepted.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/412
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we have a unified generator of chardev backend which is also
validated against the QMP schema we can replace the old generator with
it.
This patch modifies the monitor code to take virJSONValue 'props'
instead of the chardev definition and adds the conversion from the
chardev definition to JSON on higher levels.
The monitor code now also attempts to extract the returned 'pty' if
returned from qemu, so higher level code needs to report the error if
the path is needed and missing.
The current monitor generator is for now abandoned in place and will be
removed later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The upcoming refactor of the monitor code will make the hotplug code
paths use the same generator we have for commandline -chardev backends
which doesn't refuse to format certain backends which can't be
hotplugged.
To prepare for this we add a check to qemuHotplugChardevAttach()
refusing such hotplug and remove 'qemumonitorjsontest' test cases which
will not make sense any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the 'chardev-backends' test data as symlink to invoke the test case
again asserting QEMU_CAPS_CHARDEV_JSON which will make the commandline
generator use the JSON representation of the -chardev backend instead
allowing us to validate it agains the QMP schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While qemu doesn't yet support JSON args for chardev, we can at least
for test purposes of schema validation plumb it to the '-chardev'
command as it's easier to create test cases via XML than to write them
into code in 'qemuhotplugtest'.
Additionally once this becomes available and if e.g. the syntax is fixed
we'll be able to also catch the differences early.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case attempts to test as many of the chardev backends as
possible by adding channels with various configs. The idea is to have a
representative sample which will later be used also for QMP schema
testing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add tests for two new system dumps which show various configurations
that were fixed in the previous commits.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Weirdly, the existence of /sys/fs/resctrl/info/MB does not always mean
that MBA is available and used on the system. Instead of assuming that
copy the values from the default (root) allocation. This also makes it
nicer to use the proper values in case the system does not use
percentages or when the root allocation already limits the bandwidth.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since some systems support control for L2 caches as well as L3 caches it
would be useful to report their configuration in capabilities.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When connecting to a VMware server (eg using vpx://) we download and
try to parse the VMware metadata '*.vmx' file of a guest. In this
case a VMX file was found which contained this key:
pciPassthru*.present = "False"
The '*' character was not previously allowed in keys so this failed to
parse with the error:
VIR_ERR_CONF_SYNTAX: VIR_FROM_CONF: configuration file syntax error:
memory conf:74: expecting an assignment
Resolves: https://issues.redhat.com/browse/RHEL-58446
Thanks: Daniel Berrange
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add a test case that the numeric overflow when parsing disk target is
detected.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
'virBitmapShrink' clears the bits beyond the end of the bitmap when
shrinking and then reallocates to match the new size. As it uses the
address of the first bit beyond the bitmap to do the clearing it can
overrun the allocated buffer if we're not actually going to shrink it
and the last bit's address is on the chunk boundary.
Fix it by returning in that corner case and add few more tests to be
sure.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/673
Fixes: d6e582da80
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This was added in qemu commit 6e82d3b6220777667968a04c87e1667f164ebe88.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a bunch of tests verifying that script-friendly options of certain
commands are not changed incompatibly thus potentially breaking user
scripts.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add a capability dump for 'riscv64' with 'qemu-9.1' release captured
on a x86_64 host as I don't have hardware.
The last dump for riscv64 was done with qemu-8.0 which didn't manifest
the newest features such as CPU type selection and ACPI support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU-9.1 was released so update the capabilities to the final state.
Notable changes:
- Machine types 'pc-q35-6.1' and 'pc-i440fx-6.1' were deprecated
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
pvpanic-pci is the only reasonable implementation of a panic
device for aarch64/virt guests. Right now we're asking users to
provide the model name manually, but we can be more helpful and
fill it in automatically instead.
With this change, the aarch64-panic-no-model test no longer
fails and so it's no longer useful to us. Instead, we can amend
the aarch64-virt-default-models test case to include panic
coverage, something that until now wasn't possible.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now the fallback behavior is to use MODEL_ISA if we
haven't been able to find a better match, but that's not very
useful as we're still going to hit an error later, when
QEMU_CAPS_DEVICE_PANIC is not found at Validate time.
Instead of doing that, allow MODEL_DEFAULT to get all the
way to Validate and report an error upon encountering it.
The reported error changes slightly, but other than that the
set of configurations that are allowed and blocked remains
the same.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It merely duplicates the existing aarch64 coverage right now,
but it will become actually useful with the upcoming changes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This advertises the feature only for the architectures and
machine types where it can actually be used.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Inside of virschematest.c there's testSchemaDir() which iterates
over dentries in given directory but skips some files: those
without ".xml" suffix, hidden files, symlinks, etc.
Now, symlinks are detected as g_lstat() + S_ISLNK() combo which
works, except it fails to compile on mingw where is no concept of
symlinks. Replace the combo with a call to virFileIsLink() which
at least allows us to compile cleanly on mingw.
Fixes: f997fcca71
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
From: Praveen K Paladugu <prapal@linux.microsoft.com>
Move methods to connect domain interfaces to host bridges to hypervisor.
This is to allow reuse between qemu and ch drivers.
Signed-off-by: Praveen K Paladugu <praveenkpaladugu@gmail.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu supports this enlightenment since version 7.10.
From the qemu commit:
Hyper-V specification allows to pass parameters for certain hypercalls
using XMM registers ("XMM Fast Hypercall Input"). When the feature is
in use, it allows for faster hypercalls processing as KVM can avoid
reading guest's memory.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
qemu supports this enlightenment since version 7.10.
From the qemu commit:
The newly introduced enlightenment allow L0 (KVM) and L1 (Hyper-V)
hypervisors to collaborate to avoid unnecessary updates to L2
MSR-Bitmap upon vmexits.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Introduce tests to verify that the 'ps2' feature is correctly parsed
when given either 'dirty' XML from a user or 'clean' canonical XML,
as produced by libvirt. This also tests the transformation from libvirt's
internal state to the aforementioned canonical form and to a QEMU
command line.
As a bonus, we also test some known bad configurations:
- When user explicitly adds ps2 bus inputs, but also explicitly disables
the 'ps2' feature.
- When user explicitly enables the 'vmport' feature, but also explicitly
disables the 'ps2' feature. This is not supported by QEMU and will
result in vmport device not being created without emitting any warning
or error.
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability tells us whether given QEMU binary supports the
'-machine xxx,i8042=on/off' toggle used to enable/disable PS/2
controller emulation.
A few facts:
- This option was introduced in QEMU 7.0 and defaults to 'on'
- QEMU versions before 7.0 enabled i8042 controller emulation implicitly
- This option (and i8042 controller emulation itself) is only supported
by descendants of the generic PC machine type (e.g. i440fx, q35, etc.)
Signed-off-by: Kamil Szczęk <kamil@szczek.dev>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Attempting to start qemu with or hotplug an empty 'usb-storage' based
disk results in the following error:
qemu-system-x86_64: -device {"driver":"usb-storage","bus":"usb.0","port":"2","id":"usb-disk1","removable":true}: drive property not set
Reject such config at validation step and adjust tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Some JSON parsers do not like bare types outside of objects or arrays
or do validation of object key uniqueness.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add test cases for few edge cases which excercise the XML reporting from
libxml2 in anticipation of upcoming changes of behaviour.
'virschematest' must skip parsing of the broken file altogether so this
patch adds infrastructure to allow that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming patch will result in having the build directory path in some of
the output files. Replace it by a constant 'ABS_SRCDIR' to avoild
breaking tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Latest qemu will be dropping some very old machine types (2.0 - 2.3) and
some of our tests use them. As in none of the cases the test actually
needs given machine type, switch them to 'pc' instead.
In one case 'numavcpus-topology-mismatch' this caused switch to a more
modern syntax for NUMA memory specification, but the test is testing a
different aspect, thus we can modernize this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This excercises the old-style NUMA memory commandline used with 5.0 and
older machine types:
-smp 16,sockets=2,dies=1,clusters=1,cores=4,threads=2 \
-numa node,nodeid=0,cpus=0-7,mem=107 \
-numa node,nodeid=1,cpus=8-15,mem=107 \
in contrast to the modern syntax:
-smp 16,sockets=2,dies=1,clusters=1,cores=4,threads=2 \
-object '{"qom-type":"memory-backend-ram","id":"ram-node0","size":112197632}' \
-numa node,nodeid=0,cpus=0-7,memdev=ram-node0 \
-object '{"qom-type":"memory-backend-ram","id":"ram-node1","size":112197632}' \
-numa node,nodeid=1,cpus=8-15,memdev=ram-node1 \
which is tested by the 'cpu-numa1' test case where this was copied from.
This test is added so that other irrelevant test can be modernized.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add dma-translation attribute to qemu command line if specified in
domain conf.
Signed-off-by: Sandesh Patel <sandesh.patel@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add dma_translation attribute to iommu to enable/disable dma traslation
for intel-iommu
Signed-off-by: Sandesh Patel <sandesh.patel@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace the 'misc-acpi' case by testing a bunch of architectures for how
ACPI is handled including a test for the s390 ACPI strip hack added in
previous commit.
The input files are adapted from the corresponding '-minimal.xml' files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
This reverts commit cf934c87cc.
The matching logic is flawed and it would complicate support of
this command.
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
As can be seen in earlier commits, there can be two OEM strings
with the same index. But since our parser
(virSysinfoParseOEMStrings()) doesn't expect that, it increments
index in each run and thus skips over these strings.
Fortunately, we have the right index at hand - we're just
skipping over it in a loop. Just reconstruct the index back
inside the loop.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Introduce a test case for sysinfotest. The data was obtained by
running dmidecode as libvirt would run it:
dmidecode -q -t 0,1,2,3,4,11,17
Now, the expected output fits almost perfectly, except for OEM
strings where the third string looks nothing like in the
dmidecode output. This is because of testDMIDecodeDryRun() which
overwrites the third OEM string (see v6.5.0-rc1~214 for more
info). But that's okay for now.
Speaking of OEM strings, it's worth noticing two 'OEM Strings'
sections in the dmidecode output. This is causing some troubles
and will be fixed in next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Nothing special going on here.
Resolves: https://issues.redhat.com/browse/RHEL-24746
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The aim of pstore device is to provide a bit of NVRAM storage for
guest kernel to record oops/panic logs just before the it
crashes. Typical usage includes usage in combination with a
watchdog so that the logs can be inspected after the watchdog
rebooted the machine. While Linux kernel (and possibly Windows
too) support many backends, in QEMU there's just 'acpi-erst'
device so stick with that for now. The device must be attached to
a PCI bus and needs two additional values (well, corresponding
memory-backend-file needs them): size and path. Despite using
memory-backend-file this does NOT add any additional RAM to the
guest and thus I've decided to expose it as another device type
instead of memory model.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
New element 'openfiles' had confusing name. Since the patch with
this new element wasn't propagate yet, old name ('rlimit_nofile')
was changed.
...
<binary>
<openfiles max='122333'/>
</binary>
...
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This scenario is going to be ever more popular, especially now
that virt-manager has started using UEFI by default on riscv64
(see https://github.com/virt-manager/virt-manager/pull/670/).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's available as part of the edk2-riscv64 Fedora package.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By definition. Accordingly, filter them out when looking for
a read/write image.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the configuration explicitly requests a specific type of
firmware image, be it pflash or ROM, we should ignore all images
that are not of that type.
If no specific type has been requested, of course, any type is
considered a match and the selection will be based upon the
other attributes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new test case covers the scenario in which the user
specifically asked for a read/write pflash image.
From the output files, we can see that the firmware selection
algorithm has picked a ROM image, which demonstrates the
presence of another bug. We're going to fix it with an upcoming
commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Sync with the edk2-20240524-4.fc39 package from Fedora.
The only notable change is that the inteltdx variant now declares
support for Secure Boot and is a ROM image instead of a stateless
pflash one.
The latter causes it to be considered eligible for the
configuration described by the firmware-auto-efi-rw test cases,
which now passes instead of failing.
Of course that doesn't make any sense, because a ROM image by
definition cannot be read/write. So this indicates the presence
of a bug in our firmware selection algorithm, which we're going
to address with an upcoming commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an element to configure the rlimit nofile size:
...
<binary>
<rlimit_nofile size='122333'/>
</binary>
...
Non-positive values are forbidden in 'domaincommon.rng'. Added separate
test file, created by modifying the 'vhost-user-fs-fd-memory.xml'.
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Run the daemon with --print-capabilities first, to see what it supports.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have a fake virtiofsd json descriptor in our vhost-user
test data, we can remove the explicitly specified binary and our
mocking will ensure this test won't be affected by the host state.
Also remove the locking options, since they were never supported
by the Rust version of virtiofsd.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the capabilities from the latest virtiofsd main branch and adjust
the order in the priority test accordingly.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
