Commit Graph

28 Commits

Author SHA1 Message Date
Daniel P. Berrange
4591df766d Remove the Open Nebula driver
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.

Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.

The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.

Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.

* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
  ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
  src/opennebula/one_conf.c, src/opennebula/one_conf.h,
  src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
  files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
  build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
  to OpenNebula
* docs/drvone.html.in: Delete file
2011-03-28 14:09:11 +01:00
Eric Blake
ec28eb29b7 autobuild.sh: use VPATH build
Try to avoid future regressions on the VPATH front.

* autobuild.sh: Uncomment VPATH use.
* .gitignore: Exclude build directory.
2011-02-21 09:27:05 -07:00
Eric Blake
7aaf4e6439 test: fix commandtest under autobuild.sh
* tests/commandtest.c (mymain): Kill off any leaked-in fds.
* autobuild.sh: Don't leak fds.

Signed-off-by: Eric Blake <eblake@redhat.com>
2010-12-13 16:04:56 -07:00
Eric Blake
38afe8f5ec build: fix autobuild failures on gcov upgrade
Last time I ran ./autobuild.sh was on F13; and upgrading to F14
exposed these leftovers due to a newer gcov than what was in the stale
files, in the form of spurious messages that break 'make check':

+profiling:/home/remote/eblake/libvirt-tmp/tools/virsh-console.gcda:Version mismatch - expected 405R got 404R

and concluding with a bug in the autobuild.sh script itself:

./autobuild.sh: line 44: test: =: unary operator expected

* autobuild.sh: avoid syntax error on failed test
* tools/Makefile.am (CLEANFILES): Clean coverage files.
2010-11-17 11:58:45 -07:00
Matthias Bolte
e65812d479 xen-proxy: Remove it entirely and use libvirtd instead
Suggested by danpb, as it's not up-to-date anymore and
lacks many functions that were added to libvirtd.
2010-11-08 22:00:35 +01:00
Daniel P. Berrange
968eb4e5cd Add dtrace static probes in libvirtd
Adds initial support for dtrace static probes in libvirtd
daemon, assuming use of systemtap dtrace compat shim on
Linux. The probes are inserted for network client connect,
disconnect, TLS handshake states and authentication protocol
states.

This can be tested by running the xample program and then
attempting to connect with any libvirt client (virsh,
virt-manager, etc).

 # stap examples/systemtap/client.stp
  Client fd=44 connected readonly=0
  Client fd=44 auth polkit deny pid:24997,uid:500
  Client fd=44 disconnected
  Client fd=46 connected readonly=1
  Client fd=46 auth sasl allow test
  Client fd=46 disconnected

The libvirtd.stp file should also really not be required,
since it is duplicated info that is already available in
the main probes.d definition file. A script to autogenerate
the .stp file is needed, either in libvirtd tree, or better
as part of systemtap itself.

* Makefile.am: Add examples/systemtap subdir
* autobuild.sh: Disable dtrace for mingw32
* configure.ac: Add check for dtrace
* daemon/.gitignore: Ignore generated dtrace probe file
* daemon/Makefile.am: Build dtrace probe header & object
  files
* daemon/libvirtd.stp: SystemTAP convenience probeset
* daemon/libvirtd.c: Add connect/disconnect & TLS probes
* daemon/remote.c: Add SASL and PolicyKit auth probes
* daemon/probes.d: Master probe definition
* daemon/libvirtd.h: Add convenience macro for probes
  so that compilation is a no-op when dtrace is not available
* examples/systemtap/Makefile.am, examples/systemtap/client.stp
  Example systemtap script using dtrace probe markers
* libvirt.spec.in: Enable dtrace on F13/RHEL6
* mingw32-libvirt.spec.in: Force disable dtrace
2010-10-22 12:00:39 +01:00
Daniel P. Berrange
8f680ad3b8 Basic framework for auditing integration
Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API

Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled

* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
  on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
  daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
  options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
  VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
  API for auditing messages
2010-10-19 17:31:31 +01:00
Eric Blake
fc6d5b2649 autobuild.sh: avoid bashism
* autobuild.sh: Replace 'set -o pipefail' with POSIX alternative.
Reported by Matthias Bolte.
2010-06-04 10:03:52 -06:00
Eric Blake
94f7144183 autobuild.sh: provide default prefix
Without this patch and with a clean environment, ./autobuild.sh
tried to use ./configure --prefix=/, and fails.

* autobuild.sh (AUTOBUILD_INSTALL_ROOT): Provide sensible
default.  Suggested by Daniel P. Berrange.
2010-04-30 11:13:06 -06:00
Daniel P. Berrange
84e96866ac Enable ESX driver build on Mingw32
* autobuild.sh, mingw32-libvirt.spec.in: Enable esx on mingw32
* src/esx/esx_driver.c: Define AI_ADDRCONFIG if not set
* src/esx/esx_util.c, src/esx/esx_vi_types.c: Always use
  %lld & friends, since gnulib guarentees we have these
  and not the target's own variants
2009-07-31 16:15:51 +01:00
Daniel P. Berrange
16208bca89 Fix build on mingw32 by disabling netcf
* autobuild.sh, mingw32-libvirt.spec.in: Set --without-netcf for
  mingw32 builds
2009-07-30 13:07:51 +01:00
Daniel P. Berrange
484640eaf6 Fix misc build problems due to new drivers
* autobuild.sh: Disable esx/phyp build on mingw32
* configure.in: Fix handling of --without-phyp so it actually works
* libvirt.spec.in: Add missing interface.rng
* mingw32-libvirt.spec.in: Disable phyp/esx drivers
* src/phyp/phyp_driver.c: Fix missing i18n of error messages
2009-07-24 17:20:50 +01:00
Daniel P. Berrange
899ae0d2b5 Fix misc Win32 compile warnings
GCC >= 4.4 assumes the 'printf' attribute refers to the native
runtime libraries format specifiers. Thanks to gnulib, libvirt
has GNU format specifiers everywhere.  This means we need to
use 'gnu_printf' with GCC >= 4.4 to get correct compiler
checking of printf format specifiers.

* HACKING: Document new rules for ATTRIBUTE_FMT_PRINTF
* autobuild.sh, mingw32-libvirt.spec.in: Disable OpenNebula
  driver on mingw32 builds
* qemud/dispatch.h, qemud/qemu.h, src/buf.h src/internal.h,
  src/logging.h, src/security.h, src/sexpr.h, src/util.h,
  src/virterror_internal.h, src/xend_internal.c: Change
  over to ATTRIBUTE_FMT_PRINTF.
* src/virsh.c: Disable 'cd' and 'pwd' commands on Win32
  since they don't compile
* src/threads-win32.c: Add missing return value check
2009-07-23 16:07:32 +01:00
Daniel P. Berrange
969209ce07 Disable vbox driver for mingw32 builds 2009-04-19 16:37:15 +00:00
Daniel P. Berrange
437ac354fc Make error reporting threadsafe by avoiding strerror 2009-01-20 17:13:33 +00:00
Daniel P. Berrange
6f5600c803 Disable UML build on mingw32 2008-11-24 16:50:18 +00:00
Richard W.M. Jones
0ae26314b3 Updated MinGW spec file.
* .cvsignore, Makefile.am, autobuild.sh, configure.in,
	  mingw32-libvirt.spec.in: Import the latest MinGW libvirt spec
	  file.  Note that the file has been renamed to conform to
	  new Fedora packaging guidelines.
	* autobuild.sh: Fix a bug in the generation of the $EXTRA_RELEASE
	  field when autobuilding.
2008-10-10 11:33:10 +00:00
Daniel P. Berrange
542039fab0 Fully support mingw builds 2008-09-05 12:03:45 +00:00
Jim Meyering
ff7ecc1d5b improve parallel build support
* autobuild.sh: Append -j$N to MAKEFLAGS, if no -j option is there.
* libvirt.spec.in: Use %{?_smp_mflags} with "make".
Based on a patch from James Morris:
http://thread.gmane.org/gmane.comp.emulators.libvirt/8201
2008-08-28 09:08:44 +00:00
Jim Meyering
7e0da18527 autobuild.sh: Fix minor shell-quoting bugs.
* autobuild.sh: Remove unnecessary quotes.
Don't choke on a file name argument containing a space.
Don't misbehave for $AUTOBUILD_INSTALL_ROOT containing
a shell meta-character.
2008-08-21 19:31:55 +00:00
Daniel P. Berrange
0b4f277845 Enable openvz, lxc and xen proxy in automated builds 2008-07-25 09:43:23 +00:00
Daniel P. Berrange
f855e91f11 Only run coverage tests if lcov is installed 2008-05-29 20:43:08 +00:00
Jim Meyering
3cb808d2a2 autobuild.sh: Run "make syntax-check", so the autobuilder does this. 2008-02-07 19:19:45 +00:00
Jim Meyering
e04912a9f0 Remove all trailing blanks; turn on the rule to detect them.
* Makefile.cfg (local-checks-to-skip): Remove sc_trailing_blank.
* .x-sc_trailing_blank: New file, to exempt the few binary files.
2008-02-05 19:27:37 +00:00
Daniel P. Berrange
80b7a7ab4f Ensure build fails if tests fail 2007-06-07 14:48:30 +00:00
Daniel P. Berrange
dc8c7754bb Make compiler warnings fatal errors for automated builds 2007-03-08 21:32:18 +00:00
Daniel P. Berrange
26ceeb4e9b Added code coverage testing enabled via --enable-test-coverage 2007-02-14 02:12:41 +00:00
Daniel P. Berrange
4f2fcbd905 Added autobuild control file 2007-02-07 17:46:44 +00:00