Commit Graph

31 Commits

Author SHA1 Message Date
Justin Clift
dcc74f1bcf daemon: updates previous 1 line patch for correctness
The previous commit, 880da47a05,
worked on my system, but wasn't actually correct.  This follow
up patch corrects it properly.
2010-10-23 09:19:15 +11:00
Justin Clift
880da47a05 daemon: exclude requirement for probes.h on systems without systemtap
This 1-liner was actually written by Eric Blake, over IRC. It
addresses a compilation failure in make dist and make rpm for
systems without the dtrace/systemtap development libraries
installed.
2010-10-23 07:56:00 +11:00
Daniel P. Berrange
968eb4e5cd Add dtrace static probes in libvirtd
Adds initial support for dtrace static probes in libvirtd
daemon, assuming use of systemtap dtrace compat shim on
Linux. The probes are inserted for network client connect,
disconnect, TLS handshake states and authentication protocol
states.

This can be tested by running the xample program and then
attempting to connect with any libvirt client (virsh,
virt-manager, etc).

 # stap examples/systemtap/client.stp
  Client fd=44 connected readonly=0
  Client fd=44 auth polkit deny pid:24997,uid:500
  Client fd=44 disconnected
  Client fd=46 connected readonly=1
  Client fd=46 auth sasl allow test
  Client fd=46 disconnected

The libvirtd.stp file should also really not be required,
since it is duplicated info that is already available in
the main probes.d definition file. A script to autogenerate
the .stp file is needed, either in libvirtd tree, or better
as part of systemtap itself.

* Makefile.am: Add examples/systemtap subdir
* autobuild.sh: Disable dtrace for mingw32
* configure.ac: Add check for dtrace
* daemon/.gitignore: Ignore generated dtrace probe file
* daemon/Makefile.am: Build dtrace probe header & object
  files
* daemon/libvirtd.stp: SystemTAP convenience probeset
* daemon/libvirtd.c: Add connect/disconnect & TLS probes
* daemon/remote.c: Add SASL and PolicyKit auth probes
* daemon/probes.d: Master probe definition
* daemon/libvirtd.h: Add convenience macro for probes
  so that compilation is a no-op when dtrace is not available
* examples/systemtap/Makefile.am, examples/systemtap/client.stp
  Example systemtap script using dtrace probe markers
* libvirt.spec.in: Enable dtrace on F13/RHEL6
* mingw32-libvirt.spec.in: Force disable dtrace
2010-10-22 12:00:39 +01:00
Daniel P. Berrange
9bd3cce0d2 Fix symbol exports & remove duplicated libvirt_util.la linkage
The libvirt_util.la library was mistakenly linked into libvirtd
directly. Since libvirt_util.la is already linked to libvirt.so,
this resulted in libvirtd getting two copies of the code and
more critically 2 copies of static global variables.

Testing in turn exposed a issue with loadable modules. The
gnulib replacement functions are not exported to loadable
modules. Rather than trying to figure out the name sof all
gnulib functions & export them, just linkage all loadable
modules against libgnu.la statically.

* daemon/Makefile.am: Remove linkage of libvirt_util.la
  and libvirt_driver.la
* src/Makefile.am: Link driver modules against libgnu.la
* src/libvirt.c: Don't try to load modules which were
  compiled out
* src/libvirt_private.syms: Export all other internal
  symbols that are required  by drivers
2010-10-19 17:31:31 +01:00
Daniel P. Berrange
690583f790 Fix dependancies for remote generated files
Very occasionally during a parallel make, dispatch.c would
be compiled before the generated remote headers had been
fully written. This would cause it to compile an empty
union, and result in really wierd runtime bugs that are
near impossible to diagnose.

* daemon/Makefile.am: Fix remote build deps
2010-09-10 11:14:59 +01:00
Jiri Denemark
ad026e97bf build: Fix permissions of sysconfig files 2010-09-07 10:03:14 +02:00
Jiri Denemark
2c090a555b Move libvirt-guests init script and config to tools
Since libvirt-guests init script and its configuration do not require
libvirtd to be running/installed, it was a bad idea to put them into
daemon directory. libvirt.spec even includes these files in
libvirt-client subpackage, which may result in build failure for
client-only builds when the whole daemon directory is just skipped.
2010-08-25 14:07:26 +02:00
Diego Elio Pettenò
e7e9456bb4 build-sys: fix build when daemon is disabled by not installing libvirtd.8
Since the rule to build libvirtd.8 is within the WITH_LIBVIRTD conditional,
so declare the man page in there as well. Without this change, build
without daemon will fail.
2010-08-06 06:45:18 -06:00
Eric Blake
701f356ac6 build: distribute libvirt_qemu.syms
* src/Makefile.am (EXTRA_DIST): Ensure 'make distcheck' and
'rpmbuild' can reproduce a build.
* daemon/Makefile.am (DAEMON_SOURCES): Likewise.
2010-07-29 14:19:40 -06:00
Chris Lalancette
337d201ef2 Qemu remote protocol.
Since we are adding a new "per-hypervisor" protocol, we
make it so that the qemu remote protocol uses a new
PROTOCOL and PROGRAM number.  This allows us to easily
distinguish it from the normal REMOTE protocol.

This necessitates changing the proc in remote_message_header
from a "remote_procedure" to an "unsigned", which should
be the same size (and thus preserve the on-wire protocol).

Changes since v1:
 - Fixed up a couple of script problems in remote_generate_stubs.pl
 - Switch an int flag to a bool in dispatch.c

Changes since v2:
 - None

Changes since v3:
 - Change unsigned proc to signed proc, to conform to spec

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-07-23 17:30:33 -04:00
Daniel P. Berrange
69bf3535a7 Fix build by removing unknown pod2man flag
Some versions of pod2man do not support the -u flag, so this
can't be used

* daemon/Makefile.am: Remove -u flag from pod2man
2010-07-12 14:09:30 +01:00
Justin Clift
c6a6dc1d2d libvirtd: add man page for libvirtd
With gracious thanks to Chris Lalancette for helping knock the
description section into shape.

This addresses BZ #595350

  https://bugzilla.redhat.com/show_bug.cgi?id=595350
2010-07-10 00:10:55 +10:00
Eric Blake
12f7ed9357 build: depend on correct file
Otherwise, VPATH builds fail with:

make[1]: *** No rule to make target `libvirt-guests.init', needed by `all'.

Regression introduced in commit 482e08a9.

* daemon/Makefile.am (%.init): Look in correct place for
config.status.
2010-06-01 15:09:25 -06:00
Eric Blake
482e08a98a build: force init scripts to rebuild on changed --prefix
Otherwise, './configure --prefix=/foo && make &&
 ./configure --prefix=/bar && make' leaves the wrong files
in libvirtd.init (/foo instead of /bar).

* daemon/Makefile.am (libvirtd.init): Add dependency on
config.status.  Reported by Cole Robinson.
2010-05-21 15:18:24 -06:00
Jiri Denemark
66823690e4 Init script for handling guests on shutdown/boot
Example output during shutdown:

Running guests on default URI: console, rhel6-1, rhel5-64
Running guests on lxc:/// URI: lxc-shell
Running guests on xen:/// URI: error: no hypervisor driver available for xen:///
error: failed to connect to the hypervisor
Running guests on vbox+tcp://orkuz/system URI: no running guests.
Suspending guests on default URI...
Suspending console: done
Suspending rhel6-1: done
Suspending rhel5-64: done
Suspending guests on lxc:/// URI...
Suspending lxc-shell: error: Failed to save domain 9cba8bfb-56f4-6589-2d12-8a58c886dd3b state
error: this function is not supported by the hypervisor: virDomainManagedSave

Note, the "Suspending $guest: " shows progress during the suspend phase
if domjobinfo gives meaningful output.

Example output during boot:

Resuming guests on default URI...
Resuming guest rhel6-1: done
Resuming guest rhel5-64: done
Resuming guest console: done
Resuming guests on lxc:/// URI...
Resuming guest lxc-shell: already active

Configuration used for generating the examples above:
URIS='default lxc:/// xen:/// vbox+tcp://orkuz/system'

The script uses /var/lib/libvirt/libvirt-guests files to note all active
guest it should try to resume on next boot. It's content looks like:

default 7f8b9d93-30e1-f0b9-47a7-cb408482654b 085b4c95-5da2-e8e1-712f-6ea6a4156af2 fb4d8360-5305-df3a-2da1-07d682891b8c
lxc:/// 9cba8bfb-56f4-6589-2d12-8a58c886dd3b
2010-05-21 09:33:30 +02:00
Eric Blake
33c721d323 docs: distribute more coding convention documentation
These files may be useful for anyone making modifications to
source files in a tarball distribution.

* src/Makefile.am (EXTRA_DIST): Add THREADS.txt.
* daemon/Makefile.am (EXTRA_DIST): Add THREADING.txt.
2010-05-19 16:28:50 -06:00
Daniel P. Berrange
f983c32675 Keep build quiet for generated file
Adds $(AM_V_GEN) to many more manual makefile.am rules that
were generating files
2010-04-01 12:35:51 +01:00
Stefan Berger
065b6571bf Core driver implementation with ebtables support
This patch implements the core driver and provides
- management functionality for managing the filter XMLs
- compiling the internal filter representation into ebtables rules
- applying ebtables rules on a network (tap,macvtap) interface
- tearing down ebtables rules that were applied on behalf of an
interface
- updating of filters while VMs are running and causing the firewalls to
be rebuilt
- other bits and pieces

Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
2010-03-26 18:01:16 +00:00
Daniel Veillard
89bf843a6d Change logrotate to be per-hypervisor logs
Having a single logrotate configuration file for all hypervisors
did not work as logrotate would get confused if an hypervisor not
supported on that platform was still listed. Simplest is to split
the logrotate as separate per hypervisor files and change the
spec file to only install the ones compiled in.
* daemon/libvirtd.lxc.logrotate.in daemon/libvirtd.qemu.logrotate.in
  daemon/libvirtd.uml.logrotate.in: copy and split the original
  daemon/libvirtd.logrotate.in file
* daemon/Makefile.am: update to support the different files and
  cleanup in sed suggested by Eric Blake
* libvirt.spec.in: only install the relevant logrotate configs
* daemon/.gitignore: update logrotate generated list
2010-03-10 11:27:02 +01:00
Matthias Bolte
a26d2628c0 The secret driver is stateful, link it directly to libvirtd
All other stateful drivers are linked directly to libvirtd
instead of libvirt.so. Link the secret driver to libvirtd too.

* daemon/Makefile.am: link the secret driver to libvirtd
* daemon/libvirtd.c: add #ifdef WITH_SECRETS blocks
* src/Makefile.am: don't link the secret driver to libvirt.so
* src/libvirt_private.syms: remove the secretRegister symbol
2009-12-23 15:01:09 +01:00
Matthew Booth
958c366b21 Fix --with-init-script configure option
* configure.in daemon/Makefile.am: the --with-init-script configure
  option was broken, and always defaulted based on the existence of
  /etc/redhat-release. This was a systematic typo based on
  mixed use of init-script and init-scripts.
2009-11-02 17:57:05 +01:00
Daniel P. Berrange
7b1fe89a5c Misc win32 build fixes
* daemon/Makefile.am: Fix missing sasl rule
* src/datatypes.c: Add unistd.h to avoid gnulib bug
* src/util/cgroup.c: Disable mntent if not available
2009-10-08 11:56:06 +01:00
Mark McLoughlin
d285084b12 Create /var/log/libvirt/{lxc,uml} dirs
Otherwise logrotate barfs:

  error: error accessing /var/log/libvirt/uml: No such file or directory
  error: libvirtd:1 glob failed for /var/log/libvirt/uml/*.log
  error: found error in /var/log/libvirt/qemu/*.log /var/log/libvirt/uml/*.log /var/log/libvirt/lxc/*.log , skipping

* qemud/Makefile.am: always create /var/log/libvirt/{lxc,uml} when
  installing the logrotate conf; not ideal, but easier than making
  the logrotate conf depend on which drivers are enabled
2009-10-06 13:49:35 +01:00
Daniel P. Berrange
11573f3ec1 Helper functions for processing data streams in libvirtd
Defines the extensions to the remote protocol for generic
data streams. Adds a bunch of helper code to the libvirtd
daemon for working with data streams.

* daemon/Makefile.am: Add stream.c/stream.h to build
* daemon/stream.c, qemud/stream.h: Generic helper functions for
  creating new streams, associating streams with clients, finding
  existing streams for a client and removing/deleting streams.
* src/remote/remote_protocol.x: Add a new 'REMOTE_STREAM' constant
  for the 'enum remote_message_type' for encoding stream data
  in wire messages. Add a new 'REMOTE_CONTINUE' constant to
  'enum remote_message_status' to indicate further data stream
  messsages are expected to follow.  Document how the
  remote_message_header is used to encode data streams
* src/remote/remote_protocol.h: Regenerate
* daemon/dispatch.c: Remove assumption that a error message
  sent to client is always type=REMOTE_REPLY. It may now
  also be type=REMOTE_STREAM. Add convenient method for
  sending outgoing stream data packets. Log and ignore
  non-filtered incoming stream packets. Add a method for
  serializing a stream error message
* daemon/dispatch.h:  Add API for serializing stream errors
  and sending stream data packets
* daemon/qemud.h: Add struct qemud_client_stream for tracking
  active data streams for clients. Tweak filter function
  operation so that it accepts a client object too.
* daemon/qemud.c: Refactor code for free'ing message objects
  which have been fully transmitted into separate method.
  Release all active streams when client shuts down. Change
  filter function to be responsible for queueing the message
2009-09-29 15:48:58 +01:00
Chris Lalancette
03d777f345 Introduce virStrncpy.
Add the virStrncpy function, which takes a dst string, source string,
the number of bytes to copy and the number of bytes available in the
dest string.  If the source string is too large to fit into the
destination string, including the \0 byte, then no data is copied and
the function returns NULL.  Otherwise, this function copies n bytes
from source into dst, including the \0, and returns a pointer to the
dst string.  This function is intended to replace all unsafe uses
of strncpy in the code base, since strncpy does *not* guarantee that
the buffer terminates with a \0.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-09-22 20:10:00 +02:00
Daniel P. Berrange
634736a781 Move remote protocol definition into src/remote/
When making changes to the remote protocol, src/ is always built
first, so rpcgen should live there, to avoid having to run make
in the 'daemon/' directory before building src/

* src/Makefile.am: Add rules for rpcgen, and drop -I../daemon from
  remote client build
* daemon/Makefile.am: Add -I../src/remote/ to libvirtd build
  and remove rpcgen rules
* daemon/libvirtd.c: Adapt include of remote_driver.h taking
  into account new -I flag
* daemon/remote_protocol.c, daemon/remote_protocol.h,
  daemon/remote_protocol.x: Move to src/remote/
* daemon/rpcgen_fix.pl: Move to src/remote/rpcgen_fix.pl
2009-09-21 14:41:47 +01:00
Daniel P. Berrange
1355e0552e Move all shared utility files to src/util/
* src/bridge.c, src/bridge.h, src/buf.c, src/buf.h, src/cgroup.c,
  src/cgroup.h, src/conf.c, src/conf.h, src/event.c, src/event.h,
  src/hash.c, src/hash.h, src/hostusb.c, src/hostusb.h,
  src/iptables.c, src/iptables.h, src/logging.c, src/logging.h,
  src/memory.c, src/memory.h, src/pci.c, src/pci.h, src/qparams.c,
  src/qparams.h, src/stats_linux.c, src/stats_linux.h,
  src/threads-pthread.c, src/threads-pthread.h, src/threads-win32.c,
  src/threads-win32.h, src/threads.c, src/threads.h, src/util.c,
  src/util.h, src/uuid.c, src/uuid.h, src/virterror.c,
  src/virterror_internal.h, src/xml.c, src/xml.h: Move all files
  into src/util/
* daemon/Makefile.am: Add -Isrc/util/ to build flags
* src/Makefile.am: Add -Isrc/util/ to build flags and update for
  moved files
* src/libvirt_private.syms: Export cgroup APIs since they're now
  in util rather than linking directly to drivers
* src/xen/xs_internal.c: Disable bogus virEventRemoveHandle call
  when built under PROXY
* proxy/Makefile.am: Update for changed file locations. Remove
  bogus build of event.c
* tools/Makefile.am, tests/Makefile.am: Add -Isrc/util/ to build flags
2009-09-21 14:41:47 +01:00
Daniel P. Berrange
e0a48c99e4 Move all XML configuration handling to src/conf/
* src/capabilities.c, src/capabilities.h, src/domain_conf.c,
  src/domain_conf.h, src/domain_event.c, src/domain_event.h,
  src/interface_conf.c, src/interface_conf.h,
  src/network_conf.c, src/network_conf.h, src/node_device_conf.c,
  src/node_device_conf.h, src/secret_conf.c, src/secret_conf.h,
  src/storage_conf.c, src/storage_conf.h, src/storage_encryption_conf.c,
  src/storage_encryption_conf.h: Move to src/conf/
* src/Makefile.am: Add -Isrc/conf to the individual build targets
  which need to use XML config APIs. Remove LIBXML_CFLAGS, LIBSSH2_CFLAGS
  and SELINUX_CFLAGS from global INCLUDES and only have them in build
  targets which actually need them.  Create a libvirt_conf.la
  convenience library for all config parsers
* src/hostusb.h: Remove bogus include of domain_conf.h
* tests/Makefile.am: Add -Isrc/conf. Remove bogus -I$builddir/src
  since it never has any generated header files
* daemon/Makefile.am: Add -Isrc/conf
* proxy/Makefile.am: Add -Isrc/conf and cope with renamed files
* src/hash.c: Remove bogus include of libxml/threads.h
2009-09-21 14:41:46 +01:00
Daniel P. Berrange
c00c6d038c Rename daemon main code
* daemon/qemud.c: Rename to daemon/libvirtd.c
* daemon/qemud.h: Rename to daemon/libvirtd.h
* daemon/Makefile.am, daemon/dispatch.h, daemon/mdns.c,
  daemon/remote.h: Update for renamed libvirtd.h file
2009-09-21 14:41:45 +01:00
Daniel P. Berrange
ec171c529a Move config files to align with driver sources
* daemon/default-network.xml: Move to src/network/default.xml
* daemon/libvirtd_qemu.aug, daemon/test_libvirtd_qemu.aug: Move
  to src/qemu/
* src/qemu.conf: Move to src/qemu/qemu.conf
* daemon/Makefile.am: Remove rules for default-nmetwork.xml and
  libvirtd_qemu.aug and test_libvirtd_qemu.aug. Fix typo in
  uninstall-local that would install polkit again.
* src/Makefile.am: Add rules for installing network/default.xml
  and the qemu/*.aug files. Add test case for QEMU augeas files.
  Add uninstall-local rule for files/directories created during
  install. Rename install-exec-local to install-data-local.
  Only install qemu.conf if WITH_QEMU is set.
* tests/networkschematest: Update for XML location move
2009-09-21 14:41:45 +01:00
Daniel P. Berrange
5c2a1ae876 Rename qemud/ directory to daemon/
* qemud/: Rename to daemon/
* Makefile.am, configure.in, src/Makefile.am, src/remote_internal.c,
  tests/Makefile.am, tests/eventtest.c: s/qemud/daemon/ where needed
2009-09-21 14:41:42 +01:00