Commit Graph

17 Commits

Author SHA1 Message Date
Michal Privoznik
a154f5f313 qemuhelpdata: Revert my 'fix'
I was convicted that space at EOL should no be there
even for qemu help data. Hence, I've removed one in
commit bb2f621611. However, it turns out we want
it exactly the way qemu produces it. So I should undo
my premature fix. A patch against qemu has been posted
as well.
2012-11-23 09:25:20 +01:00
Ján Tomko
bb2f621611 tests: update qemuhelptest data
Both generated with
qemu-system-x86_64 --help > qemu-1.2.0

qemu-system-x86_64 \
-device ? \
-device pci-assign,? \
-device virtio-blk-pci,? \
-device virtio-net-pci,? \
-device scsi-disk,? \
-device PIIX4_PM,? \
-device usb-redir,? \
-device ide-drive,? \
-device usb-host,? 2> qemu-1.2.0-device

It seems I missed a few -device flags when doing this last time and I
mixed up qemu and qemu-kvm.
2012-11-21 18:43:18 +01:00
Ján Tomko
76345dd43a tests: add qemu-1.2.0 help data
Generated with:

qemu-system-x86_64 -help >tests/qemuhelpdata/qemu-1.2.0
qemu-system-x86_64 \
    -device ? \
    -device pci-assign,? \
    -device virtio-blk-pci,? \
    -device virtio-net-pci,? \
    -device scsi-disk,? 2>tests/qemuhelpdata/qemu-1.2.0-device
2012-09-18 15:43:28 +08:00
Jiri Denemark
ae953f5134 tests: Refresh qemu-1.1.0 data
QEMU 1.1.0 has been officially released. With 1.1.0 QEMU went back to
three-digits version even for the initial release and I renamed the data
files to match this fact. They were generated with

qemu-system-x86_64 -help >tests/qemuhelpdata/qemu-1.1.0
qemu-system-x86_64 \
    -device ? \
    -device pci-assign,? \
    -device virtio-blk-pci,? \
    -device virtio-net-pci,? \
    -device scsi-disk,? 2>tests/qemuhelpdata/qemu-1.1.0-device
2012-06-05 15:44:40 +02:00
Jiri Denemark
63b4243624 qemu: Add support for -no-user-config
Thanks to this new option we are now able to use modern CPU models (such
as Westmere) defined in external configuration file.

The qemu-1.1{,-device} data files for qemuhelptest are filled in with
qemu-1.1-rc2 output for now. I will update those files with real
qemu-1.1 output once it is released.
2012-05-15 20:29:12 +02:00
Jiri Denemark
dd8e895606 Add support for QEMU 1.0 2011-12-05 13:02:54 +01:00
Eric Blake
8644a379d7 qemu: enable multifunction for older qemu
Now that RHEL 6.2 Beta is out, it would be nice to test multifunction
devices on that platform.  This changes things so that the multifunction
cap bit can be set in two different ways: by version comparison (needed
for qemu 0.13 which lacked a -device query), and by -device query
(provided by qemu.git and backported to the RHEL beta build of
qemu-kvm which still claims to be a modified 0.12, and therefore needed
for RHEL).

* src/qemu/qemu_capabilities.c (qemuCapsParseDeviceStr): Allow
second method of setting multifunction cap bit.
* tests/qemuhelptest.c (mymain): Test it.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel62-beta-device: Likewise.
2011-10-06 10:41:21 -06:00
Laine Stump
e9bd5c0e24 Add txmode attribute to interface XML for virtio backend
This is in response to:

   https://bugzilla.redhat.com/show_bug.cgi?id=629662

Explanation

qemu's virtio-net-pci driver allows setting the algorithm used for tx
packets to either "bh" or "timer". This is done by adding ",tx=bh" or
",tx=timer" to the "-device virtio-net-pci" commandline option.

'bh' stands for 'bottom half'; when this is set, packet tx is all done
in an iothread in the bottom half of the driver. (In libvirt, this
option is called the more descriptive "iothread".)

'timer' means that tx work is done in qemu, and if there is more tx
data than can be sent at the present time, a timer is set before qemu
moves on to do other things; when the timer fires, another attempt is
made to send more data. (libvirt retains the name "timer" for this
option.)

The resulting difference, according to the qemu developer who added
the option is:

    bh makes tx more asynchronous and reduces latency, but potentially
    causes more processor bandwidth contention since the cpu doing the
    tx isn't necessarily the cpu where the guest generated the
    packets.

Solution

This patch provides a libvirt domain xml knob to change the option on
the qemu commandline, by adding a new attribute "txmode" to the
<driver> element that can be placed inside any <interface> element in
a domain definition. It's use would be something like this:

    <interface ...>
      ...
      <model type='virtio'/>
      <driver txmode='iothread'/>
      ...
    </interface>

I chose to put this setting as an attribute to <driver> rather than as
a sub-element to <tune> because it is specific to the virtio-net
driver, not something that is generally usable by all network drivers.
(note that this is the same placement as the "driver name=..."
attribute used to choose kernel vs. userland backend for the
virtio-net driver.)

Actually adding the tx=xxx option to the qemu commandline is only done
if the version of qemu being used advertises it in the output of

    qemu -device virtio-net-pci,?

If a particular txmode is requested in the XML, and the option isn't
listed in that help output, an UNSUPPORTED_CONFIG error is logged, and
the domain fails to start.
2011-02-17 11:07:58 -05:00
Eric Blake
7a2f29e4f9 smartcard: check for qemu capability
Qemu smartcard/spicevmc support exists on branches (such as
http://cgit.freedesktop.org/~alon/qemu/commit/?h=usb_ccid.v15&id=024a37b)
but is not yet upstream.  The added -help output matches a scratch build
that will be close to the RHEL 6.1 qemu-kvm.

* src/qemu/qemu_capabilities.h (QEMUD_CMD_FLAG_CCID_EMULATED)
(QEMUD_CMD_FLAG_CCID_PASSTHRU, QEMUD_CMD_FLAG_CHARDEV_SPICEVMC):
New flags.
* src/qemu/qemu_capabilities.c (qemuCapsComputeCmdFlags)
(qemuCapsParseDeviceStr): Check for smartcard capabilities.
(qemuCapsExtractVersionInfo): Tweak comment.
* tests/qemuhelptest.c (mymain): New test.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel61-device: Likewise.
2011-02-03 19:28:53 -07:00
Eric Blake
f892f5a562 qemu: improve device flag parsing
* src/qemu/qemu_capabilities.h (qemuCapsParseDeviceStr): New
prototype.
* src/qemu/qemu_capabilities.c (qemuCapsParsePCIDeviceStrs)
Rename and split...
(qemuCapsExtractDeviceStr, qemuCapsParseDeviceStr): ...to make it
easier to add and test device-specific checks.
(qemuCapsExtractVersionInfo): Update caller.
* tests/qemuhelptest.c (testHelpStrParsing): Also test parsing of
device-related flags.
(mymain): Update expected flags.
* tests/qemuhelpdata/qemu-0.12.1-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.12.3-device: New file.
* tests/qemuhelpdata/qemu-kvm-0.13.0-device: New file.
2011-01-13 16:03:11 -07:00
Eric Blake
e414dab4d6 tests: test Fedora 14 qemu-kvm -help parsing
* tests/qemuhelpdata/qemu-kvm-0.13.0: New file.
* tests/qemuhelptest.c (mymain): New test from Fedora 14 qemu-kvm,
which covers some options (like -fstype passthrough) not tested elsewhere.
2010-12-13 16:30:02 -07:00
Eric Blake
d5a710eec1 tests: test RHEL 6.0 qemu-kvm -help parsing
* tests/qemuhelpdata/qemu-kvm-0.12.1.2-rhel60: New file.
* tests/qemuhelptest.c (mymain): New test from RHEL 6.0 qemu-kvm,
which covers some options (like -vga=qxl) not tested elsewhere.
* .x-sc_prohibit_empty_lines_at_EOF: Exempt qemu help output.
2010-12-13 16:30:02 -07:00
Jiri Denemark
69b7552154 qemu: Fix detection of drive readonly option
So far, readonly=on option is used when qemu supports -device. However,
there are qemu versions which support readonly option with -drive
although they don't have support for -device.
2010-10-26 10:31:50 +02:00
Eric Blake
f30ccb2458 qemu_conf: fix flag value
(gdb) p/x QEMUD_CMD_FLAG_VNET_HOST
$7 = 0xffffffff80000000

Oops - that meant we were incorrectly setting QEMU_CMD_FLAG_RTC_TD_HACK
for qemu-kvm-0.12.3 (and probably botching a few other settings as well).

Fixes Red Hat BZ#592070

* src/qemu/qemu_conf.h (QEMUD_CMD_FLAG_VNET_HOST): Avoid sign
extension.
* tests/qemuhelpdata/qemu-kvm-0.12.3: New file.
* tests/qemuhelptest.c (mymain): Add another case.
2010-05-17 16:28:02 -06:00
Daniel P. Berrange
1ed1bf3a38 Probe for -device and use -nodefaults
Probe for the new -device flag and if available set the -nodefaults
flag, instead of using -net none, -serial none or -parallel none.
Other device types will be converted to use -device in later patches.
The -nodefaults flag will help avoid unwelcome surprises from future
QEMU releases

* src/qemu/qemu_conf.c: Probe for -device. Add -nodefaults flag.
  Remove -net none, -serial none or -parallel none
* src/qemu/qemu_conf.h: Define QEMU_CMD_FLAG_DEVICE
* tests/qemuhelpdata/qemu-0.12.1: New data file for 0.12.1 QEMU
* tests/qemuhelptest.c: Test feature extraction from 0.12.1 QEMU
2010-01-18 13:39:14 +00:00
Mark McLoughlin
110abb0343 Add qemu -help test data for qemu-kvm-0.11.0-rc2
* tests/qemuhelpdata/qemu-kvm-0.11.0-rc2: add data

* tests/qemuhelptest.c: add expected output
2009-09-10 12:37:35 +01:00
Mark McLoughlin
1fbe229b3c Add qemu help string parsing tests
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-11 14:17:42 +00:00