Many users, who admin their own machines, want to be able to access
system libvirtd via tools like virt-manager without having to enter
a root password. Just google 'virt-manager without password' and
you'll find many hits. I've read at least 5 blog posts over the years
describing slightly different ways of achieving this goal.
Let's finally add official support for this.
Install a polkit-1 rules file granting password-less auth for any user
in the new 'libvirt' group. Create the group on RPM install
https://bugzilla.redhat.com/show_bug.cgi?id=957300
Recent commit 198cc1d3 introduced integration of lockd and sanlock into
libxl, but forget to update libvirt.spec.in to also list new files
distributed via package.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Fedora doesn't ship OVMF/AAVMF builds in its repos due to licensing
issues, so the recommended way to consume these bits is via Gerd's
nightly repo: https://www.kraxel.org/repos
Let's teach fedora builds about the loader/nvram pairs these packages
installed, so users don't need to edit qemu.conf to get virt-manager
UEFI support.
Introduce libxl.conf configuration file, adding the 'autoballoon'
setting as the first knob for controlling the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Apparently, files in /usr/lib/sysctl.d are usually prefixed with numbers
for easier ordering. Let's be consistent with this. I chose 60 for
libvirtd so that it goes after 50-default.conf.
https://bugzilla.redhat.com/show_bug.cgi?id=1084876
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit 55ea7be7 removed separated modules for vbox_network and
vbox_storage drivers but forget to update libvirt.spec.in file. This
patch will fix rpm build.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Since we switched to using GIT to apply patches in the RPM spec,
we automagically also turned on -Werror, since the .git directory
now exists. We don't want this on in Fedora, since changing
header files often lead to new warnings being issued. Explicitly
turn off -Werror for non-RHEL platforms, instead of relying on
the defaults
The module XML::XPath is needed when building from git only (no need to
have it when building from tarball), so this patch moves the check from
specfile into bootstrap.conf.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Partially reverts commit 5754dbd.
The code in the specfile adds a MAC address to every <bridge>,
even for <forward mode='bridge'> for which we don't support
changing MAC addresses.
Remove it completely. For new networks, we have been adding
MAC addresses on definition/creation since the commit mentioned above.
For existing networks (pre-0.9.0), the MAC is added by this commit.
https://bugzilla.redhat.com/show_bug.cgi?id=1156367
Since libvirt.h was split into multiple files and similarly
docs/libvirt-libvirt.html, docs/hvsupport.html have bad hyperlinks. The
same happens for all the html.in files that used <code class='docref'>
tag, because page.xsl has no idea where to point the link that's found.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
With this change, any patch declared in libvirt.spec with Patch[0-9]* is
automatically applied in %prep. Unlike with the standard %patch[0-9]*,
patches are applied with "git am" to avoid some unexpected results.
However, as a result of this, all patches must be in the right format
for "git am" to be able to apply them; they should ideally be generated
from git using "git format-patch".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Create a new libvirt-host.h file to hold the public
API definitions for the virConnect type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-domain.h file to hold the public
API definitions for the virDomain type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-event.h file to hold the public
API definitions for the virEvent type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-storage.h file to hold the public
API definitions for the virStorage/Vol type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-stream.h file to hold the public
API definitions for the virStream type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Note the definition of virStreamPtr is not moved, since that
must be declared early for all other libvirt APIs to be able
to reference it.
Create a new libvirt-secret.h file to hold the public
API definitions for the virSecret type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-nodedev.h file to hold the public
API definitions for the virNodeDevice type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-nwfilter.h file to hold the public
API definitions for the virNWFilter type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-interface.h file to hold the public
API definitions for the virInterface type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-network.h file to hold the public
API definitions for the virNetwork type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Create a new libvirt-domain-snapshot.h file to hold the public
API definitions for the virDomainSnapshot type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
This is a folloup to commit 5f719596, which checks for a route
conflicting with the standard libvirt default network subnet
(192.168.122.0/24). It turns out that $() strips the trailing newline
from the output of "ip route show", so there would be no match if the
route we were looking for was the final line of output. This can be
solved by adding ${nl} to the end of the output (just as we were
already adding it at the beginning of the output).
Sometimes libvirt is installed on a host that is already using the
network 192.168.122.0/24. If the libvirt-daemon-config-network package
is installed, this creates a conflict, since that package has been
hard-coded to create a virtual network that also uses
192.168.122.0/24. In the past libvirt has attempted to warn of /
remediate this situation by checking for conflicting routes when the
network is started, but it turns out that isn't always useful (for
example in the case that the *other* interface/network creating the
conflict hasn't yet been started at the time libvirtd start its own
networks).
This patch attempts to catch the problem earlier - at install
time. During the %post install script for
libvirt-daemon-config-network, we use a case statement to look through
the output of "ip route show" for a route that exactly matches
192.168.122.0/24, and if found we search for a similar route that
*doesn't* match (e.g. 192.168.124.0/24) (note that the search starts
with "124" instead of 123 because of reports of people already
modifying their L1 host's network to 192.168.123.0/24 in an attempt to
solve exactly the problem we are also trying to solve). When we find
an available route, we just replace all occurrences of "122" in the
default.xml that is being created with the newly found 192.168
subnet. This could obviously be made more complicated - examine the
template defaul.xml to automatically determine the existing network
address and mask rather than hard coding it in the specfile, etc, but
this scripting is simpler and gets the job done as long as we continue
to use 192.168.122.0/24 in the template. (If anyone with mad bash
skillz wants to suggest something to do that, by all means please do).
This is intended to at least "further reduce" occurrence of the
problems detailed in:
https://bugzilla.redhat.com/show_bug.cgi?id=811967
In my previous patch (37d8c75fad) I've tried to fix permissions
for nvram store path. The aim was to give the nvram directory
execute permission so that domain running under other users
than qemu:qemu can access their nvram file. However, my fix
was incomplete as the path belongs to libvirt-driver-qemu
package too and I've fixed it only for the libvirt-daemon
package.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed two problem with the automatically created NVRAM varstore
file. The first, even though I run qemu as root:root for some reason I
get Permission denied when trying to open the _VARS.fd file. The
problem is, the upper directory misses execute permissions, which in
combination with us dropping some capabilities result in EPERM.
The next thing is, that if I switch SELinux to enforcing mode, I get
another EPERM because the vars file is not labeled correctly. It is
passed to qemu as disk and hence should be labelled as disk. QEMU may
write to it eventually, so this is different to kernel or initrd.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When using split UEFI image, it may come handy if libvirt manages per
domain _VARS file automatically. While the _CODE file is RO and can be
shared among multiple domains, you certainly don't want to do that on
the _VARS file. This latter one needs to be per domain. So at the
domain startup process, if it's determined that domain needs _VARS
file it's copied from this master _VARS file. The location of the
master file is configurable in qemu.conf.
Temporary, on per domain basis the location of master NVRAM file can
be overridden by this @template attribute I'm inventing to the
<nvram/> element. All it does is holding path to the master NVRAM file
from which local copy is created. If that's the case, the map in
qemu.conf is not consulted.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Since times when vbox moved to the daemon (due to some licensing
issue) the subdrivers that vbox implements were registered, but not
opened since our generic subdrivers took priority. I've tried to fix
this in 65b7d553f3 but it was not correct. Apparently moving
vbox driver registration upfront changes the default connection URI
which makes some users sad. So, this commit breaks vbox into pieces
and register vbox's network and storage drivers first, and vbox driver
then at the end. This way, the vbox driver is registered in the order
it always was, but its subdrivers are registered prior the generic
ones.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
RHEL 5 is based on libvirt 0.8.2, as was Fedora 13. RHEL 5 also
happens to be the oldest box that we actively support with a
buildbot, so it is time to clean up some crufty conditionals in
the spec file that no longer are necessary for modern Fedora.
Although it is probably okay to make further simplifications to
a newer minimum Fedora version, that can be done as a later patch.
This patch just focuses on cleaning any comparison of %{?fedora}
that will always be true or false once we assume a minimum of F13.
* libvirt.spec.in: Make with_audit default to on. Move other
conditionals to a single RHEL-5 block. Simplify any fedora
comparison older than 13. Document our assumptions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Perl is necessary to our build processing, it will invoke a lot of
generating script, like: gendispatch.pl. If perl is missing, it's
ok for build from git checkout, because autogen.sh will tell you.
But for compiling from a release tarball, configure will just record
a missing message, and continue, then build failed, like:
https://www.redhat.com/archives/libvirt-users/2014-August/msg00050.html
So need to enhance configure script to handle this negative case.
Reported-by: Hongbin Lu <hongbin@savinetwork.ca>
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's this question on the list that is asked over and over again.
How do I get {cpu, memory, ...} usage in percentage? Or its modified
version: How do I plot nice graphs like virt-manager does?
It would be nice if we have an example to inspire people. And that's
what domtop should do. Yes, it could be written in different ways, but
I've chosen this one as I think it show explicitly what users need to
implement in order to imitate virt-manager's graphing.
Note: The usage is displayed from host perspective. That is, how much
host CPUs the domain is using. But it should be fairly simple to
switch do just guest CPU usage if needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Decisions whether qemu driver and libvirt-daemon-{qemu,kvm} packages
should be built on various OS/arch combinations were scattered around
the spec file. Let's make it easier to see where qemu driver is going to
be built.
Commit 20e01504 broke 'make rpm':
error: line 540: Unknown tag: %elif 020 >= 12 || 0 >= 6
Apparently, even though shell has elif so that you can do a chain
of conditionals, the rpm spec file does not, and you have to nest
things instead.
* libvirt.spec.in: Convert %elif to proper nested %if.
Signed-off-by: Eric Blake <eblake@redhat.com>
Use secured polkit on distros which provide it. However, RHEL-6 will
still allow for older polkit-0.93 rather than forcing polkit-0.96-5
which is not available in all RHEL-6 releases.
This new module holds and formats capabilities for emulator. If you
are about to create a new domain, you may want to know what is the
host or hypervisor capable of. To make sure we don't regress on the
XML, the formatting is not something left for each driver to
implement, rather there's general format function.
The domain capabilities is a lockable object (even though the locking
is not necessary yet) which uses reference counter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For some reason there have never been pkg-config files created
for the libvirt-qemu.so and libvirt-lxc.so libraries.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce helper program to catch events from dnsmasq and maintain a custom
lease file per network. It supports dhcpv4 and dhcpv6. The file is saved as
"<interface-name>.status".
Each lease contains the following info:
<expiry-time (epoch time)> <mac> <iaid> <ip-address> <hostname> <clientid>
Example of custom leases file content:
[
{
"iaid": "1221229",
"ip-address": "2001:db8:ca2:2:1::95",
"mac-address": "52:54:00:12:a2:6d",
"hostname": "Fedora20",
"client-id": "00:04:1a:c1:d9:6b:5a:0a:e2:bc:f8:4b:1e:37:2e:38:22:55",
"expiry-time": 1393244216
},
{
"ip-address": "192.168.150.208",
"mac-address": "52:54:00:11:56:b3",
"hostname": "Wani-PC",
"client-id": "01:52:54:00:11:56:b3",
"expiry-time": 1393244248
}
]
src/Makefile.am:
* Add options to compile the helper program
src/network/bridge_driver.c:
* Introduce networkDnsmasqLeaseFileNameCustom()
* Invoke helper program along with dnsmasq
* Delete the .status file when corresponding n/w is destroyed.
src/network/leaseshelper.c
* Helper program to create the custom lease file
This commit adds a new example to illustrate peer to
peer domain migration with virDomainMigrateToURI.
Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@cloudwatt.com>
Having two tiny files with a couple definitions didn't make
as much sense as one common file, especially since I plan to
add more definitions and use it in more places.
* docs/schemas/storageencryption.rng: Merge this...
* docs/schemas/storagefilefeatures.rng: ...and this, into...
* docs/schemas/storagecommon.rng: ...this new file.
* docs/schemas/Makefile.am (schema_DATA): Reflect renames.
* docs/schemas/storagevol.rng: Likewise.
* docs/schemas/domaincommon.rng: Likewise.
* libvirt.spec.in: Likewise.
* mingw-libvirt.spec.in: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
This commit moves a few directories into more appropriate subpackages.
In a few cases a directory is owned by two subpackages, however this is
OK as long as the permissions and ownership for the directory are
consistent between them.
- %{_sysconfdir}/libvirt/qemu/
Used by the qemu and network drivers.
When building with separate driver modules, this directory is only
owned by l-d-d-network. l-d-d-qemu has a hard dependency on
l-d-d-network, which means this directory is created with the
correct permissions and ownership, however it's clearer if both
subpackages own the directory independently.
- %{_sysconfdir}/libvirt/nwfilter/
Used by the nwfilter driver only.
This directory is currently always owned by libvirt-daemon. This
commit moves it into l-d-d-nwfilter when building with separate
driver modules.
- %{_localstatedir}/run/libvirt/network/
Used by the network and nwfilter drivers.
When building without separate driver modules, this directory is
should be owned by libvirt-daemon only if either of these drivers
are enabled. When building with separate driver modules, this
directory should be owned by l-d-d-nwfilter in addition to
l-d-d-network.
- %{_datadir}/libvirt/networks/ and
%{_datadir}/libvirt/networks/default.xml
Used only by the %post scriptlet in libvirt-daemon-config-network.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Libvirt tarball contains po/stamp-po file which prevents any po/*.gmo
file to be regenerated even if a corresponding po/*.po file is newer. By
removing the stamp-po file, all *.gmo files are properly updated if
required. This allows downstreams to provide patches that update
translations.
On Fedora 20, I added this to my '~/.rpmmacros':
%_without_udev 1
%_without_storage_mpath 1
%_without_storage_disk 1
and uninstalled systemd-devel (which also removed device-mapper-devel).
Then I ran 'make rpm', and inspected the results:
$ ldd ~/rpmbuild/BUILD/libvirt-1.2.2/daemon/.libs/libvirtd | grep syst
$
Then I reinstalled systemd-devel, where I now see:
$ ldd ~/rpmbuild/BUILD/libvirt-1.2.2/daemon/.libs/libvirtd | grep syst
libsystemd-daemon.so.0 => /lib64/libsystemd-daemon.so.0 (0x00007ffb858ba000)
$
Oops - the build is non-deterministic, where the final binary
depends on my build environment. The fix is to require
systemd-devel in all situations where the code base uses it.
Now ~/.rpmmacros can contain "%define _without_systemd_daemon 1"
to explicitly disable use of the library, but the library is now
a strict build requirement for normal builds; if systemd-devel
is not installed, the user now gets an up-front warning:
$ rpmbuild -ta libvirt-1.2.2.tar.gz
error: Failed build dependencies:
systemd-devel is needed by libvirt-1.2.2-1.fc20.x86_64
* libvirt.spec.in (with_systemd_daemon): New variable.
(BuildRequires): Require systemd-devel for more than just udev.
(%configure): Make choice of systemd_daemon explicit.
Signed-off-by: Eric Blake <eblake@redhat.com>
On Fedora 20, with the following in my ~/.rpmmacros:
%_without_udev 1
%_without_storage_mpath 1
and with device-mapper-devel uninstalled, 'make rpm' fails with:
checking for libdevmapper.h... no
configure: error: You must install device-mapper-devel/libdevmapper >= 1.0.0 to compile libvirt
error: Bad exit status from /var/tmp/rpm-tmp.Wo9pOG (%build)
This is a rather late point to be issuing an error; better is
to flag missing packages up front. The fix is to match the logic
in configure.ac on when devmapper is required (for both mpath and
storage). While at it, rbd storage is not dependent on mpath.
With this patch applied, I now get:
$ rpmbuild -ta libvirt-1.2.2.tar.gz
error: Failed build dependencies:
device-mapper-devel is needed by libvirt-1.2.2-1.fc20.x86_64
until either installing the package or further modifying
~/.rpmmacros to add "%_without_storage_disk 1".
* libvirt.spec.in (BuildRequires): Fix build when mpath is
disabled.
Signed-off-by: Eric Blake <eblake@redhat.com>
Generally, we try to make the spec file tweakable via user
variables, so that they can select a different subset of sub-rpms
to build. We also try to explicitly list all driver config
options, rather than leaving the chance that the rpm build may be
non-deterministic based on what the user had installed locally.
But in the case of the recent bhyve hypervisor driver, there is
no port of bhyve to Linux, so it is easier to just blindly
disable it for now. If someone ever does try to port bhyve to
Fedora, we can make the spec file conditional at that point.
* libvirt.spec.in (%configure): Don't try to build bhyve.
Signed-off-by: Eric Blake <eblake@redhat.com>
Similar to cf76c4b, if modules are used, then nwfilter configuration
requires the nwfilter driver module.
Signed-off-by: Eric Blake <eblake@redhat.com>
This reverts commit 8d6c3659b8.
After further list discussion, it was decided that pulling in
wireshark as a dependency is a bit too much for the base 'libvirt'
package. Remember also that 'libvirt-devel' is also not pulled in
by the base 'libvirt' - the metapackage exists for full
functionality of libvirtd, rather than to pull in all subpackages.
In general, the 'libvirt' metapackage should pull in all subpackages.
Fix this for the wireshark subpackage created in commit f9ada9f.
* libvirt.spec.in (Requires): Add dependency.
Signed-off-by: Eric Blake <eblake@redhat.com>
When building modules, libvirt-daemon-config-network requires
libvirt-daemon-driver-network to ensure the 'default' network
is setup properly
Signed-off-by: Eric Blake <eblake@redhat.com>
On Fedora 20, with wireshark-devel installed, 'make rpm' failed
due to installed but unpackaged files related to wireshark. As
F20 is already released without wireshark, I chose to add a new
sub-package that is enabled only for F21 and later. Furthermore,
all existing wireshark plugins belong to the wireshark package,
so I got to invent behavior of how the first third-party wireshark
module will behave.
* libvirt.spec.in (with_wireshark): Add new conditional.
* configure.ac (ws-plugindir): Improve wording.
Signed-off-by: Eric Blake <eblake@redhat.com>
This partially reverts 5eb4b04211 and 62774afb6b.
Rewrite the domsuspend example from scratch. This time do it right.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit ff76566 moved around things in the specfiles to put
driver-specific files into their appropriate sub-packages (when
with_driver_modules == 1), but accidentally changed things so that the
deamon-driver-network and daemon-config-network files were only
included in a package when with_driver_modules == 0. This broke "make
rpm" on fedora (where with_driver_modules == 1).
This patch follows the pattern (already used for the files in other
sub-modules) of duplicating the files for the main package
(!with_driver_modules) and the sub-package (with_driver_modules).
The domain events demo program isn't really tied to domain
events anymore, so rename it to object events.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
- systemctl and the %systemd_* RPM macros can take multiple unit names
in the one invocation. Make use of this to avoid repeated systemd
daemon reloads.
- virtlockd was only properly enabled and disabled when using systemd,
but when systemd RPM macros were not available (e.g. on Fedora < 18).
Make sure it's enabled when systemd RPM macros are present, or when
using initscripts.
- Always use "reload" on virtlockd, not "condrestart". This allows it to
cleanly re-execute itself without losing running state. Ignore any
error should the reload fail.
- Move the reloading of virtlockd and libvirtd via their initscripts
into the daemon package's %postun scriptlet. These services must be
restarted after all of the libvirt-daemon-driver-* packages have
been upgraded during the same RPM transaction.
- Add a %triggerpostun executed only when upgrading an older
libvirt-daemon. As an older package would only reload libvirtd during
%post, and the newer package would only reload libvirtd during
%postun, such an upgrade would not reload libvirtd at all without the
trigger.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
The libvirt-daemon package contains several driver-specific files,
directories, and script, which can be problematic when building the
package with multiple hypervisor support, e.g. both QEMU and Xen.
E.g. installing a QEMU+Xen enabled libvirt-daemon on a Xen-only system
will result in the creation of qemu and kvm groups and a qemu user.
Move the driver-specific files, directories, and script to the
respective driver subpackages.
The daemon-config-{network,nwfilter} subpackages are built regardless
of whether or not with_driver_modules is defined, therefore don't
conditionally define their files list.
The domsuspend example code is a really old and bad exmample of (how not
to use) the libvirt API. Remove it as it's apparent that nobody tried to
use it. It was broken and nobody complained.
We support gluster volumes in domain XML, so we also ought to
support them as a storage pool. Besides, a future patch will
want to take advantage of libgfapi to handle the case of a
gluster device holding qcow2 rather than raw storage, and for
that to work, we need a storage backend that can read gluster
storage volume contents. This sets up the framework.
Note that the new pool is named 'gluster' to match a
<disk type='network'><source protocol='gluster'> image source
already supported in a <domain>; it does NOT match the
<pool type='netfs'><source><target type='glusterfs'>,
since that uses a FUSE mount to a local file name rather than
a network name.
This and subsequent patches have been tested against glusterfs
3.4.1 (available on Fedora 19); there are likely bugs in older
versions that may prevent decent use of gfapi, so this patch
enforces the minimum version tested. A future patch may lower
the minimum. On the other hand, I hit at least two bugs in
3.4.1 that will be fixed in 3.5/3.4.2, where it might be worth
raising the minimum: glfs_readdir is nicer to use than
glfs_readdir_r [1], and glfs_fini should only return failure on
an actual failure [2].
[1] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00085.html
[2] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00086.html
* configure.ac (WITH_STORAGE_GLUSTER): New conditional.
* m4/virt-gluster.m4: new file.
* libvirt.spec.in (BuildRequires): Support gluster in spec file.
* src/conf/storage_conf.h (VIR_STORAGE_POOL_GLUSTER): New pool
type.
* src/conf/storage_conf.c (poolTypeInfo): Treat similar to
sheepdog and rbd.
(virStoragePoolDefFormat): Don't output target for gluster.
* src/storage/storage_backend_gluster.h: New file.
* src/storage/storage_backend_gluster.c: Likewise.
* po/POTFILES.in: Add new file.
* src/storage/storage_backend.c (backends): Register new type.
* src/Makefile.am (STORAGE_DRIVER_GLUSTER_SOURCES): Build new files.
* src/storage/storage_backend.h (_virStorageBackend): Documet
assumption.
Signed-off-by: Eric Blake <eblake@redhat.com>
The python binding now lives in
http://libvirt.org/git/?p=libvirt-python.git
that repo also provides an RPM which is upgrade compatible
with the old libvirt-python sub-RPM.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The previous attempt (commit d65e0e1) removed just one of two
libvirt-guests restarts that happened on libvirt-client update. Let's
remove the last one too :-)
https://bugzilla.redhat.com/show_bug.cgi?id=962225
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Restarting an active libvirt-guests.service is the equivalent of
doing:
/usr/libexec/libvirt-guests.sh stop
/usr/libexec/libvirt-guests.sh start
Which in a default configuration will managedsave every running VM,
and then restore them. Certainly not something we should do every
time the libvirt-client RPM is updated.
Just drop the try-restart attempt, I don't know what purpose it
serves anyways.
https://bugzilla.redhat.com/show_bug.cgi?id=962225
https://bugzilla.redhat.com/show_bug.cgi?id=1033614
As virt-login-shell is an SUID binary, we should restrict its usage to
just the users chosen by an administrator to use virt-login-shell as
their login shell. This can easily be done by making the binary
executable only by users from a new virtlogin group.
RHEL-6's rpmbuild wipes the docdir for a (sub-)package if any %doc
directives are present, prior to copying in the marked documentation.
This means we can't prepopulate this directory with the HTML
documentation during the %install phase.
Instead, move the HTML documentation to a temporary directory during
%install and mark the contents of this temporary directory with %doc.
This fixes a build regression introduced in
commit e23216da9a
Author: Cole Robinson <crobinso@redhat.com>
Date: Wed Sep 25 13:20:40 2013 -0400
spec: Clean up distribution of ChangeLog (and others)
where the libvirt-docs sub-RPM gained a %doc directive, thus
triggering the RPM bug.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
For inexplicable reasons, many of the 3rd party package deps
were left against the 'libvirt-daemon' RPM when the drivers
were split out. This makes a minimal install heavier that
it should be. Push them all down into libvirt-daemon-driver-XXX
so they're only pulled in when truly needed
With this change applied, a minimal install of just the
libvirt-daemon-driver-lxc RPM is reduced by 41 MB on a
Fedora 19 host.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Many people will not want the setuid virt-login-shell binary
installed by default, so move it into a separate sub-RPM
named libvirt-login-shell. This RPM is only generated if
LXC is enabled
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
- Move COPYING* to libvirt-client, so every package pulls them in
- Move AUTHORS ChangeLog.gz NEWS README TODO from -daemon to -docs
- Drop duplicate distribution of docs in -python
https://bugzilla.redhat.com/show_bug.cgi?id=977099
With the existing pkcheck (pid, start time) tuple for identifying
the process, there is a race condition, where a process can make
a libvirt RPC call and in another thread exec a setuid application,
causing it to change to effective UID 0. This in turn causes polkit
to do its permission check based on the wrong UID.
To address this, libvirt must get the UID the caller had at time
of connect() (from SO_PEERCRED) and pass a (pid, start time, uid)
triple to the pkcheck program.
This fix requires that libvirt is re-built against a version of
polkit that has the fix for its CVE-2013-4288, so that libvirt
can see 'pkg-config --variable pkcheck_supports_uid polkit-gobject-1'
Signed-off-by: Colin Walters <walters@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Several recent patches cleaned up 'make rpm' for the situation
when client_only is true; these were done by manual spec file
editing (since it's relatively hard to come by a RHEL 5 s390
box). Make it easier to do in the future via a simpler command
line override.
* libvirt.spec.in (client_only): Allow for override.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit ba5f3c7 moved virtualBox support into libvirtd, but the spec
file was still unconditionally requesting it even when not building
the server side. Thankfully there were no ill effects for a
client_only build, as most uses of %{with_vbox} were guarded by
%{with_libvirtd}; but we might as well avoid confusion by more
closely matching the makefile.
* libvirt.spec.in (with_vbox): Hoist to server conditionals.
Signed-off-by: Eric Blake <eblake@redhat.com>
'make rpm' failed if ~/.rpmmacros contains '%_without_lxc 1',
which simulates the case of not having lxc available.
RPM build errors:
File not found: /home/eblake/rpmbuild/BUILDROOT/libvirt-1.1.1-1.fc19.x86_64/etc/libvirt/virt-login-shell.conf
File not found by glob: /home/eblake/rpmbuild/BUILDROOT/libvirt-1.1.1-1.fc19.x86_64/usr/share/man/man1/virt-login-shell.1*
File not found: /home/eblake/rpmbuild/BUILDROOT/libvirt-1.1.1-1.fc19.x86_64/usr/bin/virt-login-shell
make: *** [rpm] Error 1
Reported by Dan Berrange.
* libvirt.spec.in: Mark virt-login-shell as conditional on lxc.
Signed-off-by: Eric Blake <eblake@redhat.com>
The gnulib testsuite is relatively stable - the only times it is
likely to have a test change from pass to fail is on a gnulib
submodule update or a major system change (such as moving from
Fedora 18 to 19, or other large change to libc). While it is an
important test for end users on arbitrary machines (to make sure
that the portability glue works for their machine), it mostly
wastes time for development testing (as most developers aren't
making any of the major changes that would cause gnulib tests
to alter behavior). Thus, it pays to make the tests optional
at configure time, defaulting to off for development, on for
tarballs, with autobuilders requesting it to be on. It also
helps to allow a make-time override, via VIR_TEST_EXPENSIVE=[01]
(much the way automake sets up V=[01] for overriding the configure
time default of how verbose to be).
Automake has some pretty hard-coded magic with regards to the
TESTS variable; I had quite a job figuring out how to keep
'make distcheck' passing regardless of the configure option
setting in use, while still disabling the tests at runtime
when I did not configure them on and did not use the override
variable. Thankfully, we require GNU make, which lets me
hide some information from Automake's magic handling of TESTS.
* bootstrap.conf (bootstrap_epilogue): Munge gnulib test variable.
* configure.ac (--enable-expensive-tests): Add new enable switch.
(VIR_TEST_EXPENSIVE_DEFAULT, WITH_EXPENSIVE_TESTS): Set new
witnesses.
* gnulib/tests/Makefile.am (TESTS): Make tests conditional on
configure settings and the VIR_TEST_EXPENSIVE variable.
* tests/Makefile.am (TESTS_ENVIRONMENT): Expose VIR_TEST_EXPENSIVE
to all tests.
* autobuild.sh: Enable all tests during autobuilds.
* libvirt.spec.in (%configure): Likewise.
* mingw-libvirt.spec.in (%mingw_configure): Likewise.
* docs/hacking.html.in: Document the option.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=951637
Newer gnutls uses nettle, rather than gcrypt, which is a lot nicer
regarding initialization. Yet we were unconditionally initializing
gcrypt even when gnutls wouldn't be using it, and having two crypto
libraries linked into libvirt.so is pointless, but mostly harmless
(it doesn't crash, but does interfere with certification efforts).
There are three distinct version ranges to worry about when
determining which crypto lib gnutls uses, per these gnutls mails:
2.12: http://lists.gnu.org/archive/html/gnutls-devel/2011-03/msg00034.html
3.0: http://lists.gnu.org/archive/html/gnutls-devel/2011-07/msg00035.html
If pkg-config can prove version numbers and/or list the crypto
library used for static linking, we have our proof; if not, it
is safer (even if pointless) to continue to use gcrypt ourselves.
* configure.ac (WITH_GNUTLS): Probe whether to add -lgcrypt, and
define a witness WITH_GNUTLS_GCRYPT.
* src/libvirt.c (virTLSMutexInit, virTLSMutexDestroy)
(virTLSMutexLock, virTLSMutexUnlock, virTLSThreadImpl)
(virGlobalInit): Honor the witness.
* libvirt.spec.in (BuildRequires): Make gcrypt usage conditional,
no longer needed in Fedora 19.
Signed-off-by: Eric Blake <eblake@redhat.com>
The virtlockd daemon supports an /etc/libvirt/virtlockd.conf
config file, but we never installed a default config, nor
created any augeas scripts. This change addresses that omission.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a virt-login-shell binary that can be set as a user's
shell, such that when they login, it causes them to enter
the LXC container with a name matching their user name.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As both /var/lib/libvirt/qemu and /var/lib/libvirt/qemu/channel/target
are owned by us, the intermediate /var/lib/libvirt/qemu/channel should
be owned by us too.
As RHEL provides a stable tool chain, we don't have to worry about
frequent changes in reported compiler warnings (which prevents us from
enabling -Werror unconditionally).
https://bugzilla.redhat.com/show_bug.cgi?id=905513
Libssh2 isn't reliable enough to support the libvirt transport using it.
The problems include mishandling of "known_hosts" files that may confuse
users.
If libapparmor-devel happens to be installed when building the
RPM, it will failed due to unlisted virt-aa-helper in %files.
Add support for apparmor in the spec, so that we can explicitly
turn it on/off, defaulting to off in all distros. This causes
--without-apparmor to be given to configure, preventing the
build failures if the user happens to have libapparmor-devel
present.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Current automake enables parallel test by default, which means test
details are only logged in test-suite.log and not printed to stderr.
This patch makes test failures directly visible in RPM build logs even
when parallel tests are turned on.
File hasn't been really touched for 7 years. And with recent rawhide
changes it contributed to an RPM build failure. Let's drop it.
This also removes installation of a libvirt-python doc dir, so drop
handling of it from the RPM spec.
When using 'rpmbuild --define "_without_xen 1"', but on a new enough
Fedora where %{with_libxl} still gets set to 1 by default, the
build dependencies were incomplete, which could result in 'make rpm'
failing because ./configure failed to build the libxl driver.
* libvirt.spec.in (BuildRequires): Fix xen-devel condition.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add <features> and <compat> elements to volume target XML.
<compat> is a string which for qcow2 represents the QEMU version
it should be compatible with. Valid values are 0.10 and 1.1.
1.1 is implicit if the <features> element is present, otherwise
qemu-img default is used. 0.10 can be specified to explicitly
create older images after the qemu-img default changes.
<features> contains optional features, so far
<lazy_refcounts/> is available, which enables caching of reference
counters, improving performance for snapshots.
Our configure.ac says:
Not all versions of gnutls include -lgcrypt, and so we add
it explicitly for the calls to gcry_control/check_version
Thus we cannot rely on gnutls-devel to bring grcypt-devel as a
dependency.
Commit 6ab6bc19f0 has introduced separate
daemon/driver packages for vbox. These should only be built for x86
architectures which is done hereby.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
https://www.gnu.org/licenses/gpl-howto.html states:
You should also include a copy of the license itself somewhere in the
distribution of your program. All programs, whether they are released
under the GPL or LGPL, should include the text version of the GPL. In
GNU programs the license is usually in a file called COPYING.
If you are releasing your program under the LGPL, you should also
include the text version of the LGPL, usually in a file called
COPYING.LESSER. Please note that, since the LGPL is a set of
additional permissions on top of the GPL, it's important to include
both licenses so users have all the materials they need to understand
their rights.
* configure.ac (COPYING): No more games with non-git file.
* COPYING: New file, copied from gnulib.
* COPYING.LIB: Rename...
* COPYING.LESSER: ...to this.
* .gitignore: Track licenses in git.
* cfg.mk (exclude_file_name_regexp--sc_copyright_address): Tweak
rule.
* libvirt.spec.in (daemon, client, python): Reflect rename.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=963016 points out that
we don't use initscripts by default on Fedora any more.
* libvirt.spec.in (Requires): Better explanation of gettext.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=924501 tracks a
problem that occurs if uid 107 is already in use at the time
libvirt is first installed. In response that problem, Fedora
packaging guidelines were recently updated. This fixes the
spec file to comply with the new guidelines:
https://fedoraproject.org/wiki/Packaging:UsersAndGroups
* libvirt.spec.in (daemon): Follow updated Fedora guidelines.
Signed-off-by: Eric Blake <eblake@redhat.com>
It's not desired to force users imagine path for a socket they
are not even supposed to connect to. On the other hand, we
already have a release where the qemu agent socket path is
exposed to XML, so we cannot silently drop it from there.
The new path is generated in form:
$LOCALSTATEDIR/lib/libvirt/qemu/channel/target/$domain.$name
for qemu system mode, and
$XDG_CONFIG_HOME/qemu/lib/channel/target/$domain.$name
for qemu session mode.
Conditional BuildRequires: should be at the top level, rather
than appearing in conditional sub-package sections. This
appears to be the only offender.
* libvirt.spec.in (BuildRequires): Move libblkid-devel into
correct area.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since commit b8a32e0e94, all man pages
depend on configure.ac so that they are properly regenerated whenever
libvirt version changes. Thus libvirt.spec needs to have a build
dependency on pod2man when %{enable_autotools} is set.
When a changelog entry references an RPM macro, % needs to be escaped so
that it does not appear expanded in package changelog.
Fri Mar 4 2009 is incorrect since Mar 4 was Wednesday. Since
libvirt-0.6.1 was released on Mar 4 2009, we should change Fri to Wed.
The macro was made to help installing broken packages that did not use
DESTDIR correctly by overriding individual path variables (prefix,
sysconfdir, ...). Newer rpm provides fixed make_install macro that calls
make install with just the correct DESTDIR, however it is not available
everywhere (e.g., RHEL 5 does not have it). On the other hand the
make_install macro is simple and straightforward enough for us to use
its expansion directly.
