For list concatenation to work, the value returned by the
keys() method must be converted to a list first.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
All of these have been replaced with methods.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This replaces uses of the has_key() method.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We have switched the docs to using the HTML5 doctype declaration in
commit b1c81567c7
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Jul 26 18:01:25 2017 +0100
docs: switch to using HTML5 doctype declaration
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When you add a bunch of pcie-root-port controllers to a q35 guest
in order to have hotplug capabilities, you also need to make sure
you're adding the pcie-root controller at the same time or you
will get an error. Document this fact.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This type of information defines attributes of a system
chassis, such as SMBIOS Chassis Asset Tag.
access inside VM (for example)
Linux: /sys/class/dmi/id/chassis_asset_tag.
Windows: (Get-WmiObject Win32_SystemEnclosure).SMBIOSAssetTag
wirhin Windows PowerShell.
As an example, add the following to the guest XML
<chassis>
<entry name='manufacturer'>Dell Inc.</entry>
<entry name='version'>2.12</entry>
<entry name='serial'>65X0XF2</entry>
<entry name='asset'>40000101</entry>
<entry name='sku'>Type3Sku1</entry>
</chassis>
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This reverts commit 038eb472a0.
On reflection adding defaults for arbitrary guest XML device config
settings to the qemu.conf is not a sustainable path. Removing the
support for rx/tx queue size so that it doesn't set a bad precedent.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Document that contributors are required to assert compliance with the
Developers Certification of Origin 1.1, by providing Signed-off-by tags
for all commit messages. The DCO is formally stating what we have long
implicitly expected of contributors in terms of their legal rights to
make the contribution. This puts the project in a stronger position
should any questions around contributions be raised going forward in the
future.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In 2074ef6cd4 and c56cdf259 (and friends) we've added two
attributes to virtio NICs: rx_queue_size and tx_queue_size.
However, sysadmins might want to set these on per-host basis but
don't necessarily have an access to domain XML (e.g. because they
are generated by some other app). So let's expose them under
qemu.conf (the settings from domain XML still take precedence as
they are more specific ones).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For vhost-user ports, Open vSwitch acts as the server and QEMU the client.
When OVS crashes or restarts, the QEMU process should be reconnected to
OVS.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Missed adding the "encryption" description term entry to the list
of possible sub-elements for disk source. The description details
were there, just not the tag.
More info in the documentation, this is basically the XML parsing/formatting
support, schemas, tests and documentation for the new cputune/cachetune element
that will get used by following patches.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The OEM strings table in SMBIOS allows the vendor to pass arbitrary
strings into the guest OS. This can be used as a way to pass data to an
application like cloud-init, or potentially as an alternative to the
kernel command line for OS installers where you can't modify the install
ISO image to change the kernel args.
As an example, consider if cloud-init and anaconda supported OEM strings
you could use something like
<oemStrings>
<entry>cloud-init:ds=nocloud-net;s=http://10.10.0.1:8000/</entry>
<entry>anaconda:method=http://dl.fedoraproject.org/pub/fedora/linux/releases/25/x86_64/os</entry>
</oemStrings>
use of a application specific prefix as illustrated above is
recommended, but not mandated, so that an app can reliably identify
which of the many OEM strings are targetted at it.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As usual, a bunch of changes slipped through the cracks during the
development cycle. Update the release notes to include at least the
most notable ones.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Migration never removes any configuration files on the destination host.
Thus when the domain is already defined on the destination, it will stay
persistent even after migration without --persist.
https://bugzilla.redhat.com/show_bug.cgi?id=1514930
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The Fedora mingw support is all merged in Fedora repos, so remove the
outdated link.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Change all links to https:// where the remote site supports it. Fix URLs for
a few packages that moved, and delete entries which appear to be dead.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently we only describe setting the CN field for server certs. This leads
to inevitable pain for users who set it to the fully qualified hostname and
then use a unqualified hostname or IP address to connect in the URI. Describe
the usage of Subject Alt Name extensions, to provide multiple hostnames and
IP addresses. This will help users avoid the classic mistake and is important
future proofing, since at least in browsers, TLS libraries no longer use the
CN field for validation, mandating use of SAN info instead.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The contents of a <rule> are a choice of exactly one union member. The
RNG schema, however, was allowing an arbitrary number of instances of every
union member at once.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'wiremode' attribute exists in a couple of Xen XML files, but no code has
ever parsed that value. It was later added to the RNG schema too, again despite
there not being any code which parses it.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libxlxml2domconfigdata directory was not covered in the RNG schema
tests. This hid a few bugs in both the libxl XML files and the RNG
schema itself.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce specific a target types with two models for the console
devices (sclp and sclplm) used in s390 and s390x guests, so isa-serial
is no more used for them.
This makes <serial> usable on s390 and s390x guests, with at most only
a single sclpconsole and one sclplmconsole devices usable in a single
guest (due to limitations in QEMU, which will enforce already at
runtime).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1449265
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the pl011 device
used by mach-virt guests, which means isa-serial will no longer show
up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that pl011 is not
used for non-mach-virt guests and add a bunch of test cases.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=151292
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the spapr-vty
device used by pSeries guests, which means isa-serial will no longer
show up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that spapr-vty is
not used for non-pSeries guests and add a bunch of test cases.
This commit is best viewed with 'git show -w'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511421
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This information will be used to select, and store in the guest
configuration in order to guarantee ABI stability, the concrete
(hypervisor-specific) model for serial devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Our current documentation is missing some information and doesn't
do a great job at explaining how the <serial> and <console> elements
are connected. Let's try to fix that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Since we already have such support for libxl all we need is qemu
driver adjustment. And a test case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Starting from qemu 2.11, the `-device vmcoreinfo` will create a fw_cfg
entry for a guest to store dump details, necessary to process kernel
dump with KASLR enabled and providing additional kernel details.
In essence, it is similar to -fw_cfg name=etc/vmcoreinfo,file=X but in
this case it is not backed by a file, but collected by QEMU itself.
Since the device is a singleton and shouldn't use additional hardware
resources, it is presented as a <feature> element in the libvirt
domain XML.
The device is arm/x86 only for now (targets that support fw_cfg+dma).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1395248
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
While we have collective knowledge about the support status of various
parts of libvirt, this has never been formally documented, leaving our
users to guess.
Note, this document makes one change to our previous policy. It explicitly
declares the RPC protocol of libvirtd as being a supported interface. THis
accepts the reality that we can a) never change it without breaking compat
with old libvirt.so, b) there are both rust + go impls that are written
against the RPC protocol already.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The XML namespace URI for the QEMU/LXC drivers must use http as the protocol
otherwise it won't match the parser's expectations.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the definition of virHookQemuOpType and virHookNetworkOpType,
we should use 'stopped' rather than 'shutdown'.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Most of the time it's okay to leave this up to negotiation between
the guest and the host, but in some situations it can be useful to
manually decide the behavior, especially to enforce its availability.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308743
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add two new entries under new features for 3.10.0. One
advertising support for specifying distance between vNUMA cells
and another advertising Xen's support for vNUMA configuration.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add support for describing NUMA distances in a domain's <numa> <cell>
XML description.
Below is an example of a 4 node setup:
<cpu>
<numa>
<cell id='0' cpus='0-3' memory='2097152' unit='KiB'>
<distances>
<sibling id='0' value='10'/>
<sibling id='1' value='21'/>
<sibling id='2' value='31'/>
<sibling id='3' value='21'/>
</distances>
</cell>
<cell id='1' cpus='4-7' memory='2097152' unit='KiB'>
<distances>
<sibling id='0' value='21'/>
<sibling id='1' value='10'/>
<sibling id='2' value='21'/>
<sibling id='3' value='31'/>
</distances>
</cell>
<cell id='2' cpus='8-11' memory='2097152' unit='KiB'>
<distances>
<sibling id='0' value='31'/>
<sibling id='1' value='21'/>
<sibling id='2' value='10'/>
<sibling id='3' value='21'/>
</distances>
<cell id='3' cpus='12-15' memory='2097152' unit='KiB'>
<distances>
<sibling id='0' value='21'/>
<sibling id='1' value='31'/>
<sibling id='2' value='21'/>
<sibling id='3' value='10'/>
</distances>
</cell>
</numa>
</cpu>
A <cell> defines a NUMA node. <distances> describes the NUMA distance
from the <cell> to the other NUMA nodes (the <sibling>s). For example,
in above XML description, the distance between NUMA node0 <cell id='0'
...> and NUMA node2 <sibling id='2' ...> is 31.
Valid distance values are '10 <= value <= 255'. A distance value of 10
represents the distance to the node itself. A distance value of 20
represents the default value for remote nodes but other values are
possible depending on the physical topology of the system.
When distances are not fully described, any missing sibling distance
values will default to 10 for local nodes and 20 for remote nodes.
If distance is given for A -> B, then we default B -> A to the same
value instead of 20.
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
* libvirt no longer supports vbox <= 3.x
* update XML definition sample to show how to attach disks to VBOX's SAS
controller and how to change IDE controller model.
* update XML to show how to create RDP display with autoport.
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
For multipath disks it might be useful to have the same WWN for multiple
disks. It's the users choice to do so. Since we dropped the check that
disallows using duplicate WWNs drop the docs as well.
https://bugzilla.redhat.com/show_bug.cgi?id=1464975
Since the virStorageEncryptionPtr encryption; is a member of
_virStorageSource it really should be allowed to be a subelement
of the disk <source> for various disk formats:
Source{File|Dir|Block|Volume}
SourceProtocol{RBD|ISCSI|NBD|Gluster|Simple|HTTP}
NB: Simple includes sheepdog, ftp, ftps, tftp
That way we can set up to allow the <encryption> element to be
formatted within the disk source, but we still need to be wary
from whence the element was read - see keep track and when it
comes to format the data, ensure it's written in the correct place.
Modify the qemuxml2argvtest to add a parse failure when there is an
<encryption> as a child of <disk> *and* an <encryption> as a child
of <source>.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine.
Since the virStorageAuthDefPtr auth; is a member of _virStorageSource
it really should be allowed to be a subelement of the disk <source>
for the RBD and iSCSI prototcols. That way we can set up to allow
the <auth> element to be formatted within the disk source.
Since we've allowed the <auth> to be a child of <disk>, we'll need
to keep track of how it was read so that when writing out we'll know
whether to format as child of <disk> or <source>. For the argv2xml
parsing, let's format under <source> as a preference. Do not allow
<auth> to be both a child of <disk> and <source>.
Modify the qemuxml2argvtest to add a parse failure when there is an
<auth> as a child of <disk> *and* an <auth> as a child of <source>.
Add tests to validate that if the <auth> was found in <source>, then
the resulting xml2xml and xml2arg works just fine. The two new .args
file are exact copies of the non "-source" version of the file.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine
Update the virstoragefile, virstoragetest, and args2xml file to show
the "preference" to place <auth> as a child of <source>.
So we have a syntax-check rule to catch all tab indents but it naturally
can't catch tab spacing, i.e. as a delimiter. This patch is a result of
running 'vim -en +retab +wq'
(using tabstop=8 softtabstop=4 shiftwidth=4 expandtab) on each file from
a list generated by the following:
find . -regextype gnu-awk \
-regex ".*\.(rng|syms|html|s?[ch]|py|pl|php(\.code)?)(\.in)?" \
| xargs git grep -lP "\t"
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Commit e371b3b changed all the links to libvirt.org to use https.
Remove the leftover 'http' links from downloads page, since they
point to https anyway.
Index will remain an internal property even if we allow backing store
parsing from the XML, so we need to allow backing store without it in
the schema.
In 361c8dc17 and 662140fa68 I've implemented hot-(un)plug of
watchdog devices. Document this change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1475250
It's possible to define and start a pool with a '.' in the
name; however, when trying to add a volume to a domain using
the storage pool source with a '.' in the storage pool name,
the domain RNG validation fails because RNG uses 'genericName'
which does not allow a '.' in the name.
Domain XML def parsing has a virXMLValidateAgainstSchema which
generates the error. The Storage Pool XML def parsing has no
call to virXMLValidateAgainstSchema. The only Storage Pool name
validation occurs in virStoragePoolDefParseXML to ensure the
name doesn't have a '/' in it and in storagePoolDefineXML to
call virXMLCheckIllegalChars using the same parameter "\n" as
qemuDomainDefineXMLFlags would check after the RNG check
could be succesful.
In order to resolve this, create a poolName definition in
storagecommon.rng that will mimic the domain name regex that
disallows a newline character, but add the "/" in the exclude
list. Then modify the pool and volume source name definitions
to key off that poolName.
In cea3715b2e and d86fd2402e I've fixed domifstat and QoS
that was reversed for some types of interfaces. Document this
in the news file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemu 2.7.0 introduces multiqueue virtio-blk(commit 2f27059).
This patch introduces a new attribute "queues". An example of
the XML:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' queues='4'/>
The corresponding QEMU command line:
-device virtio-blk-pci,scsi=off,num-queues=4,id=virtio-disk0
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We get a question every now and then about why hibernation works when
suspend-to-disk is disabled and similar. Let's hope that, by documenting the
obvious more blatantly, people will get more informed.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add an optional virTristateBool haveTLS to virStorageSource to
manage whether a storage source will be using TLS.
Sample XML for a VxHS disk:
<disk type='network' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251' tls='yes'>
<host name='192.168.0.1' port='9999'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
Additionally add a tlsFromConfig boolean to control whether the TLS
setting was due to domain configuration or qemu.conf global setting
in order to decide whether to Format the haveTLS setting for either
a live or saved domain configuration file.
Update the qemuxml2xmltest in order to add a test to show the proper
parsing.
Also update the docs to describe the tls attribute.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
This reverts commit edaf4ebe95.
This uses "reconnect" as attribute for <source> element, but we already
have a <reconnect> element for <source> element for chardev devices.
Since this is the same feature for different device it should be
presented in XML the same way.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The functionality was added in 4.8, but due to a rename of
the DEVLINK_CMD_ESWITCH_GET constant in the kernel headers,
the headers from kernel 4.11 are required by the libvirt code.
Remove the reference from the news entry, since it could be
misleading.
For vhost-user ports, Open vSwitch acts as the server and QEMU the client.
When OVS crashed or restart, QEMU shoule be reconnect to OVS.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Alter the schema to allow a VxHS block device. Sample XML is:
<disk type='network' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251'>
<host name='192.168.0.1' port='9999'/>
</source>
<target dev='vda' bus='virtio'/>
<serial>eb90327c-8302-4725-9e1b-4e85ed4dc251</serial>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</disk>
Update the html docs to describe the capability for VxHS.
Alter the qemuxml2xmltest to validate the formatting.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
This is particularly useful on operating systems that don't ship
Python as part of the base system (eg. FreeBSD) while still working
just as well as it did before on Linux.
While at it, make it explicit that our scripts are only going to
work with Python 2, and remove the usage of unbuffered I/O, which
as far as I can tell has no effect on the output files.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This is particularly useful on operating systems that don't ship
Perl as part of the base system (eg. FreeBSD) while still working
just as well as it did before on Linux.
In one case (src/rpc/genprotocol.pl) the interpreter path was
missing altogether.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Adding functionality to libvirt that will allow querying the interface
for the availability of switchdev Offloading NIC capabilities.
The switchdev mode was introduced in kernel 4.8, the iproute2-devlink
command to retrieve the switchdev NIC feature with command example:
devlink dev eswitch show pci/0000:03:00.0
This feature is needed for Openstack so we can do a scheduling decision
if the NIC is in Hardware Offload (switchdev) or regular SR-IOV (legacy) mode.
And select the appropriate hypervisors with the requested capability see [1].
[1] - https://specs.openstack.org/openstack/nova-specs/specs/pike/approved/enable-sriov-nic-features.html
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1075520
Currently, all that users can specify for an interface type of
'user' is the common attributes: PCI address, NIC model (and
that's basically it). However, some need to configure other
address range than the default one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: laine@laine.org
Alter the example to remove the <auth> from:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='iscsi-pool' volume='unit:0:0:1' mode='host'/>
<auth username='myuser'>
<secret type='iscsi' usage='libvirtiscsi'/>
</auth>
<target dev='vdb' bus='virtio'/>
</disk>
and
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='iscsi-pool' volume='unit:0:0:2' mode='direct'/>
<auth username='myuser'>
<secret type='iscsi' usage='libvirtiscsi'/>
</auth>
<target dev='vdc' bus='virtio'/>
</disk>
The reality is, it's not even used. For a <source pool> the authdef
from the storage source pool will supercede whatever is in the <disk>
definition during virStorageTranslateDiskSourcePool processing. In fact,
if the pool doesn't have/need authentication, then the authdef would
be removed anyway as the storage pool would be handling things.
The "proof" for this is in the adjustment to the test to add an
<auth> for a disk. The resulting .args file won't add what normally
would be added "myname:encodedpassword@" prior to the hostname in
the IQN (e.g. iscsi://myname:encodedpassword@iscsi.example.org:3260/...
Some elements are offset just one space compared to their parent,
some are misaligned completely, and so on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Suggested-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
commit '96e55048' caused make check failure for virschematest:
1929) Checking ../docs/news.xml against ../news.rng ... libvirt: XML Util error : XML document failed to validate against schema: Unable to validate doc against /home/jferlan/git/libvirt.work/docs/schemas/../news.rng
Datatype element summary has child elements
Element summary failed to validate content
Datatype element summary has child elements
Element summary failed to validate content
^[[31m^[[1mFAILED^[[0m
That's because <code> elements don't appear to be allowed in the schema.
Rather than attempt to fix the schema, figured it was simpler to just
remove them and let the schema fix happen later.
Documents some changes that have slipped through the cracks
during the development cycle.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch documents support for managedsave-dumpxml,
managedsave-define and managedsave-edit commands.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
HTML5 obsoletes the 'name' attribute in favor of 'id',
and our TOC generator apparently follows the recommendation
to the letter, resulting in a broken TOC if you use the
old-school attribute.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
For all machine types except i440fx, making a guest hotplug
capable requires some sort of planning. Add some information
to help users make educated choices when defining the PCI
topology of guests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
If there's no content in <script></script>, the XSTL generator
will turn it into <script/> which is not permitted in XHTML.
Adding a single whitespace is enough to guarantee an explicit
closing tag. Without this, the scripts never get loaded by
the browser.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The website does not look good in a mobile device as the text is
far too small and the layout assumes a wide screen.
Make the style dynamically adapt based on viewport size, so a
mobile device gets a layout more suited to its dimensions,
also changing "Learn" to "Docs"
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
- Update the driver page with the information about using
autport for VNC ports
- Add a news entry
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit id '94d2d6429' caused a syntax-error check to fail:
docs/Makefile.am:276: $(AM_V_GEN)sed -e '/<span id="php_placeholder"><\/span>/r '"$(srcdir)/$@.code.in" \
maint.mk: Wrap long lines in Makefiles
cfg.mk:721: recipe for target 'sc_prohibit_long_lines' failed
make: *** [sc_prohibit_long_lines] Error 1
make: *** Waiting for unfinished jobs....
Altered the line to put another line wrap between sed and -e
commit id '40cb5581' caused syntax-check error:
prohibit_empty_lines_at_EOF
docs/manifest.json
maint.mk: empty line(s) or no newline at EOF
maint.mk:929: recipe for target 'sc_prohibit_empty_lines_at_EOF' failed
make: *** [sc_prohibit_empty_lines_at_EOF] Error 1
I just edited the file and replaced the closing } and it made things happy
Use of the relation "shortcut" for a favicon was an Internet
Explorer only feature. Other browsers just require "icon".
The new icons & metadata are generated using
https://realfavicongenerator.net/
which is user tested to work well across all modern clients
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'shape' attribute on <a> is used together with a 'coords'
attribute to create hot-zones in image maps. We're not using
image maps so our inclusion of a 'shape' attribute is bogus.
Furthermore this is forbidden in HTML5.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The HTML5 doctype is simply
<!DOCTYPE html>
no DTD is present because HTML5 is no longer defined as an
extension of SGML.
XSL has no way to natively output a doctype without a public
or system identifier, so we have to use an <xsl:text> hack
instead.
See also
https://dev.w3.org/html5/html-author/#doctype-declaration
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We have files which use HTML entities for decorating letters
with unlauts, accents, etc. Other files just use UTF-8
characters directly for this. Remove the HTML entities since
they have no benefit and use UTF-8 instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A handful of places in the docs choose to use — instead
of '-' for no clear reason. Remove this inconsistency.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some docs pages were using <p> </p> to add arbitrary whitespace
in the page. This is something that should be done by CSS if needed,
but it is not needed here, so delete it.
There was also use of <td> </td> which adds no value at all
when we have CSS to prettify tables.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We already require libxml to be installed, so it is not unreasonable
to require xmllint and xsltproc to be installed too - any platform
with the former will have the latter too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The HTML pages are currently validated against an XHTML 1.0 DTD.
This makes it impossible to take advantage of features that are
introduced in HTML 5, because they'll fail validation.
There is intentionally no DTD defined for HTML 5, so there's no
alternative to XHTML 1.0 DTD that we could switch to. The only
options are to stick with XHTML 1.0 forever, or drop the DTD
validation, and we pick the latter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'name' attribute on <a...> elements is deprecated in favour
of the 'id' attribute which is allowed on any element. HTML5
drops 'name' support entirely.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In 19581afd77 the configure.ac was updated. However, the
news.xml was missing adjustment - creating the new section for
the release.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I was volunteered to prepare the release notes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Disallow providing the wwnn/wwpn of the HBA in the adapter XML:
<adapter type='fc_host' [parent='scsi_hostN'] wwnn='HBA_wwnn'
wwpn='HBA_wwpn'/>
This should be considered a configuration error since a vHBA
would not be created. In order to use the HBA as the backing the
following XML should be used:
<adapter type='scsi_host' name='scsi_hostN'/>
So add a check prior to the checkParent call to validate that
the provided wwnn/wwpn resolves to a vHBA and not an HBA.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In order not to make the build even less reproducible, honour
SOURCE_DATE_EPOCH environment variable as specified:
https://reproducible-builds.org/specs/source-date-epoch/
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When generating HTML documentation we put enum values into a
table so that we can display the value's name, numerical value
and description (if it has one). Now the last part is problem. If
the value doesn't have description the table row has just two
cells and if it has one the row counts three cells. This makes
HTML engines render the description into very little space - for
instance see:
html/libvirt-libvirt-domain.html#virDomainMemoryStatTags
We can avoid this problem if we let the cell that corresponds to
numerical value span over two cells if there's no description.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After f4cb85c6af we only have two options for placing enum
values descriptions. It's either:
typedef enum {
/* Some long description. Therefore it's placed before
* the value. */
VIR_ENUM_A_VAL = 1,
} virEnumA;
or:
typedef enum {
VIR_ENUM_B_VAL = 1, /* Some short description */
} virEnumB;
However, our apibuild.py script is not able to deal with the
former one. It messes up comments. To fix this couple of things
needs to be done:
a) DO NOT reset self.comment in parseEnumBlock(). This is a
result from our tokenizer. Upon calling token() if it finds a
comment block it stores it in self.comment and returns the next
token (which is not comment). Therefore, if we reset self.comment
we might lose the first comment in the enum block.
b) we need a variable to track if the current enum block uses
value descriptions before or after values. That is if it's type
virEnumA or virEnumB. Depending on that, it we're dealing with
virEnumA type and the current token is a comma ',' we can add the
value into the list as we already have everything needed:
comment, name and value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This patch addresses the same aspects on PPC the bug 1103314 addressed
on x86.
PCI expander bus creates multiple primary PCI busses, where each of these
busses can be assigned a specific NUMA affinity, which, on x86 is
advertised through ACPI on a per-bus basis.
For SPAPR, a PHB's NUMA affinities are assigned on a per-PHB basis, and
there is no mechanism for advertising NUMA affinities to a guest on a
per-bus basis. So, even if qemu-ppc manages to get some sort of multi-bus
topology working using PXB, there is no way to expose the affinities
of these busses to the guest. It can only be exposed on a per-PHB/per-domain
basis.
So patch enables NUMA node tag in pci-root controller on PPC.
The way to set the NUMA node is through the numa_node option of
spapr-pci-host-bridge device. However for the implicit PHB, the only way
to set the numa_node is from the -global option. The -global option applies
to all the PHBs unless explicitly specified with the option on the
respective PHB of CLI. The default PHB has the emulated devices only, so
the patch prevents setting the NUMA node for the default PHB.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
/domain/devices/disk/driver/@name is not a required or mandatory
attribute according to formatdomain, and indeed it was agreed on
IRC that the attribute is "optional for input, recommended (but
not required) for output". Currently the schema requires the
attribute, causing virt-xml-validate to fail on disk config where
the driver name is not explicitly specified. E.g.
# cat test.xml | grep -A 5 cdrom
<disk type='file' device='cdrom'>
<driver type='raw'/>
<target dev='hdb' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='0' target='0' unit='1'/>
</disk>
# virt-xml-validate test.xml
Relax-NG validity error : Extra element devices in interleave
test.xml:21: element devices: Relax-NG validity error : Element domain failed to validate content
test.xml fails to validate
Relaxing the name attribute to be optional fixes the validation
# virt-xml-validate test.xml
test.xml validates
Adding it to the virDomainControllerPCIModelName enumeration
is enough for existing code to handle it, so parsing and
formatting will work without further tweaking.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Users may want to run the init command of a container as a special
user / group. This is achieved by adding <inituser> and <initgroup>
elements. Note that the user can either provide a name or an ID to
specify the user / group to be used.
This commit also fixes a side effect of being able to run the command
as a non-root user: the user needs rights on the tty to allow shell
job control.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Some containers may want the application to run in a special directory.
Add <initdir> element in the domain configuration to handle this case
and use it in the lxc driver.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
When running an application container, setting environment variables
could be important.
The newly introduced <initenv> tag in domain configuration will allow
setting environment variables to the init program.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
This removes the classical XSS vulnerability of using unquoted
PHP_SELF.
Reported-by: John Lightsey <john@nixnuts.net>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
- Add a news entry
- Update driver's page with information about the new
vgaconf attribute and provide usage example; while here,
fix a grammar mistake
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add support for vgaconf driver configuration. In domain xml it looks like
this:
<video>
<driver vgaconf='io|on|off'>
<model .../>
</video>
It was added with bhyve gop video in mind to allow users control how the
video device is exposed to the guest, specifically, how VGA I/O is
handled.
One can refer to the bhyve manual page to get more detailed description
of the possible VGA configuration options:
https://www.freebsd.org/cgi/man.cgi?query=bhyve&manpath=FreeBSD+12-current
The relevant part could be found using the 'vgaconf' keyword.
Also, add some tests for this new feature.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Despite being a generated file, HACKING has been tracked in
the git repository along with actual source files. As far as
I'm aware, it's the only generated file for which that happens.
Times and times again, people[1] have committed changes to
the source file without refreshing the generated copy at the
same time.
The rationale for tracking the generated file is to help out
people who just cloned the git repository looking to contribue;
however, README-hacking already contains enough information to
get perspective contributors to a place where they can simply
look at docs/hacking.html instead.
[1] Mostly me, to be honest
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
People looking to help out should really go through the
contributor guidelines when getting started, so the more
documents point to them the better.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
For the benefit of first time contributors, we point out that 'git
send-email' might have to be installed separately; however, we omit
the fact that some configuration will likely be needed before it
can successfully deliver patches to the mailing list.
Some minor tweaks to the existing contents are included as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Update the per device boot schema to add an optional loadparm parameter.
eg: <boot order='1' loadparm='2'/>
Extend the virDomainDeviceInfo to support loadparm option.
Modify the appropriate functions to parse loadparm from boot device xml.
Add the xml2xml test to validate the field.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
On some platforms the number of bits in the cbm_mask might not be
divisible by 4 (and not even by 2), so we need to properly count the
bits. Similar file, min_cbm_bits, is properly parsed and used, but if
the number is greater than one, we lose the information about
granularity when reporting the data in capabilities. For that matter
always report granularity, but if it is not the same as the minimum,
add that information in there as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The following patches will add an actual content in the cookie and use
the data when restoring a domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In 48d9e6cdcc and friends we've allowed users to back guest
memory by a file inside the host. And in order to keep things
manageable the memory_backing_dir variable was introduced to
qemu.conf to specify the directory where the files are kept.
However, libvirt's policy is that directories are created on
domain startup if they don't exist. We've missed this one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Mention CCW and fc_remote_port capablities in the news.xml file.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Similar to scsi_host and fc_host, there is a relation between a
scsi_target and its transport specific fc_remote_port. Let's expose this
relation and relevant information behind it.
An example for a virsh nodedev-dumpxml:
virsh # nodedev-dumpxml scsi_target0_0_0
<device>
<name>scsi_target0_0_0</name>
<path>/sys/devices/[...]/host0/rport-0:0-0/target0:0:0</path>
<parent>scsi_host0</parent>
<capability type='scsi_target'>
<target>target0:0:0</target>
<capability type='fc_remote_port'>
<rport>rport-0:0-0</rport>
<wwpn>0x9d73bc45f0e21a86</wwpn>
</capability>
</capability>
</device>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Now that the node_device driver is aware of CCW devices, let's hook up
virsh so that we can filter them properly.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Make CCW devices available to the node_device driver. The devices are
already seen by udev so let's implement necessary code for detecting
them properly.
Topologically, CCW devices are similar to PCI devices, e.g.:
+- ccw_0_0_1a2b
|
+- scsi_host0
|
+- scsi_target0_0_0
|
+- scsi_0_0_0_0
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Commit 6fb5dd4fd8 removed docs/archnetwork.html.in, but
left behind a pointer to it in docs/formatnetwork.html.in.
Update it so that it points to the wiki, which contains
more detailed and recent information anyway.
Start discovering the mediated devices on the host system and format the
attributes for the mediated device into the XML. Compared to the parent
device which reports generic information about the abstract mediated
devices types, a child device only reports the type name it has been
instantiated from and the IOMMU group number, since that's device
specific compared to the rest of the info that can be gathered about
mediated devices at the moment.
This patch introduces both the formatting and parsing routines, updates
nodedev.rng schema, adding a testcase as well.
The resulting mdev child device XML:
<device>
<name>mdev_4b20d080_1b54_4048_85b3_a6a62d165c01</name>
<path>/sys/devices/.../4b20d080-1b54-4048-85b3-a6a62d165c01</path>
<parent>pci_0000_06_00_0</parent>
<driver>
<name>vfio_mdev</name>
</driver>
<capability type='mdev'>
<type id='vendor_supplied_type_id'/>
<iommuGroup number='NUM'/>
<capability/>
<device/>
https://bugzilla.redhat.com/show_bug.cgi?id=1452072
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The parent device needs to report the generic stuff about the supported
mediated devices types, like device API, available instances, type name,
etc. Therefore this patch introduces a new nested capability element of
type 'mdev_types' with the resulting XML of the following format:
<device>
...
<capability type='pci'>
...
<capability type='mdev_types'>
<type id='vendor_supplied_id'>
<name>optional_vendor_supplied_codename</name>
<deviceAPI>vfio-pci</deviceAPI>
<availableInstances>NUM</availableInstances>
</type>
...
<type>
...
</type>
</capability>
</capability>
...
</device>
https://bugzilla.redhat.com/show_bug.cgi?id=1452072
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Add a new <ioapic> element with a driver attribute.
Possible values are qemu and kvm. With 'qemu', the I/O
APIC can be put in the userspace even for KVM domains.
https://bugzilla.redhat.com/show_bug.cgi?id=1427005
There should be no need to make dir based pools world/group readable.
So use 0711, not 0755, as the default perms for storage dirs.
Updates in v2:
- adapt commit wording to mention dropping group readable as well
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
We're only adding only info about L3 caches, we can add more
later (just by changing one line), but for now that's more than enough
without overwhelming anyone.
XML snippet of how this should look like (also seen as part of the commit):
<cache>
<bank id='0' level='3' type='both' size='8192' unit='KiB' cpus='0-7'/>
</cache>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Nested HVM support in the libxl driver is a news-worthy
improvement for libvirt 3.3.0.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The parser had been clearing out *all* suggested device names for
type='direct' (aka macvtap) interfaces. All of the code implementing
macvtap allows for a user-specified device name, so we should allow
it. In the case that an interface name starts with "macvtap" or
"macvlan" though, we do still clear it out, just as we do with "vnet"
(which is the prefix used for automatically generated tap device
names), since those are the prefixes for the names we autogenerate for
macvtap and macvlan devices.
Resolves: https://bugzilla.redhat.com/1335798
Make the schema more strict for HTTP disks requiring a name and
mandating exactly one source host.
ftp/tftp entries were not moved here, since http transport also will
support cookies and other options, which will be added later.
This patch introduces
<cache level='N' mode='emulate'/>
<cache mode='passthrough'/>
<cache mode='disable'/>
sub element of /domain/cpu. Currently only a single <cache> element is
allowed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There's lot more to document about the nodedev driver, besides PCI and
SR-IOV (even this might need to be extended), but let's start small-ish
and at least have a page for it linked from the drivers.html.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since we do have this template at hand, why not using it wherever
possible (list of supported pool types and remote access section).
Also, perform some stylistic micro adjustments.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
We are currently parsing only rx/frames/max because that's the only
value that makes sense for us. The tun device just added support for
this one and the others are only supported by hardware devices which
we don't need to worry about as the only way we'd pass those to the
domain is using <hostdev/> or <interface type='hostdev'/>. And in
those cases the guest can modify the settings itself.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>