Only selected fields from the disk source were copied when cold updating
source in a CDROM drive. When such drive was backed by a network file
this resulted into corruption of the definition:
<disk type='network' device='cdrom'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='gluster' name='gluster-vol1(null)'>
<host name='localhost'/>
</source>
<target dev='vdc' bus='virtio'/>
<readonly/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x0a' function='0x0'/>
</disk>
Update the whole source instead of cherry-picking elements.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1166024
By querying the qemu guest agent with the QMP command
"guest-network-get-interfaces" and converting the received JSON
output to structured objects.
Although "ifconfig" is deprecated, IP aliases created by "ifconfig"
are supported by this API. The legacy syntax of an IP alias is:
"<ifname>:<alias-name>". Since we want all aliases to be clubbed
under parent interface, simply stripping ":<alias-name>" suffices.
Note that IP aliases formed by "ip" aren't visible to "ifconfig",
and aliases created by "ip" do not have any specific name. But
we are lucky, as qemu guest agent detects aliases created by both.
src/qemu/qemu_agent.h:
* Define qemuAgentGetInterfaces
src/qemu/qemu_agent.c:
* Implement qemuAgentGetInterface
src/qemu/qemu_driver.c:
* New function qemuGetDHCPInterfaces
* New function qemuDomainInterfaceAddresses
src/remote_protocol-sructs:
* Define new structs
tests/qemuagenttest.c:
* Add new test: testQemuAgentGetInterfaces
Test cases for IP aliases, 0 or multiple ipv4/ipv6 address(es)
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
Patch 51f9f03a4c introduces a regression
where if a blockCommit operation fails the disk is still marked as being
part of a block job but can't be unmarked later.
As pointed out by jtomko in his review of the IOThreads pinning code:
http://www.redhat.com/archives/libvir-list/2015-March/msg00495.html
there are some comments sprinkled in indicating IOThreads were using
the same structure as the VcpuPin code...
This is the first patch of a few that will change the virDomainVcpuPin*
structures and code to just virDomainPin* - starting with the data
structure naming...
During his review of the iothreads pin setting code, Pavel noted that
there was a potential memory leak with respect to how the newVcpuPin
is handled and the goto endjob's in failure paths which would not free
the memory. For reference, See:
http://www.redhat.com/archives/libvir-list/2015-March/msg00415.html
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
Surprisingly we did not grab a VM job when a block job finished and we'd
happily rewrite the backing chain data. This made it possible to crash
libvirt when queueing two backing chains tightly and other badness.
To fix it, add yet another handler to the helper thread that handles
monitor events that require a job.
Now that qemuDomainBlocksStatsGather provides functions of both
qemuMonitorGetBlockStatsParamsNumber and qemuMonitorGetBlockStatsInfo we
can reuse it and kill a lot of code.
Additionally as a bonus qemuDomainBlockStatsFlags will now support
summary statistics so add a statement to the virsh man page about that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1142636
In the LXC driver, if the disk path is not provided the API returns
total statistics for all disks of the domain. With the new text monitor
implementation this can be now done in the qemu driver too.
Add code that wil total the stats for all disks if the path is not
provided.
Extract the code to look up the disk alias and return the block stats
struct so that it can be reused later in qemuDomainBlockStatsFlags.
The function uses qemuMonitorGetAllBlockStatsInfo instead of
qemuMonitorGetBlockStatsInfo.
By adding a call and check of return of virBitmapToData to the
IOThreads code, my Coverity checker lets me know qemuDomainHelperGetVcpus
also needs to check the status...
Depending on the flags passed, either attempt to return the active/live
IOThread data for the domain or the config data.
The active/live path will call into the Monitor in order to get the
IOThread data and then correlate the thread_id's returned from the
monitor to the currently running system/threads in order to ascertain
the affinity for each iothread_id.
The config path will map each of the configured IOThreads and return
any configured iothreadspin data
Signed-off-by: John Ferlan <jferlan@redhat.com>
There was a mess in the way how we store unlimited value for memory
limits and how we handled values provided by user. Internally there
were two possible ways how to store unlimited value: as 0 value or as
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED. Because we chose to store memory
limits as unsigned long long, we cannot use -1 to represent unlimited.
It's much easier for us to say that everything greater than
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED means unlimited and leave 0 as valid
value despite that it makes no sense to set limit to 0.
Remove unnecessary function virCompareLimitUlong. The update of test
is to prevent the 0 to be miss-used as unlimited in future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146539
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When the domain's source disk type is network, if source protocol is rbd
or sheepdog, the 'if().. break' will end the current case, which lead to
miss check the driver type is raw or qcow2. Libvirt will allow to create
internal snapshot for a running domain with raw format disk which based
on rbd storage.
While both protocols support internal snapshots of the disk qemu is not
able to use it as it requires some place to store the memory image. The
check if the disk is backed by a qcow2 image needs to be executed
always.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1179533
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Previously when a domain would get stuck in a domain job due to a
programming mistake we'd report the following control state:
$ virsh domcontrol domain
occupied (1424343406.150s)
The timestamp is invalid as the monitor was not entered for that domain.
We can use that to detect that the domain has an active job and report a
better error instead:
$ virsh domcontrol domain
error: internal (locking) error
We have two different places that needs to be updated while touching
code for allocation spice ports. Add a bool option to
'qemuProcessSPICEAllocatePorts' function to switch between true and fake
allocation so we can use this function also in qemu_driver to generate
native domain definition.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The problem here was that when opening a channel, we were checking
whether the channel given is alias (can't be NULL for running domain) or
it's name, which can be NULL (for example with spicevmc). In case of
such domain qemuDomainOpenChannel() made the daemon crash.
STREQ_NULLABLE() is safe to use since the code in question is wrapped in
"if (name)" and is more readable, so use that instead of checking for
non-NULL "vm->def->channels[i]->target.name".
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
NUMA enabled guest configuration explicitly specifies memory sizes for
individual nodes. Allowing the virDomainSetMemoryFlags API (and friends)
to change the total doesn't make sense as the individual node configs
are not updated in that case.
Forbid use of the API in case NUMA is specified.
Commit f7afeddc added code to report to systemd an array of interface
indexes for all tap devices used by a guest. Unfortunately it not only
didn't add code to report the ifindexes for macvtap interfaces
(interface type='direct') or the tap devices used by type='ethernet',
it ended up sending "-1" as the ifindex for each macvtap or hostdev
interface. This resulted in a failure to start any domain that had a
macvtap or hostdev interface (or actually any type other than
"network" or "bridge").
This patch does the following with the nicindexes array:
1) Modify qemuBuildInterfaceCommandLine() to only fill in the
nicindexes array if given a non-NULL pointer to an array (and modifies
the test jig calls to the function to send NULL). This is because
there are tests in the test suite that have type='ethernet' and still
have an ifname specified, but that device of course doesn't actually
exist on the test system, so attempts to call virNetDevGetIndex() will
fail.
2) Even then, only add an entry to the nicindexes array for
appropriate types, and to do so for all appropriate types ("network",
"bridge", and "direct"), but only if the ifname is known (since that
is required to call virNetDevGetIndex().
https://bugzilla.redhat.com/show_bug.cgi?id=1183869
Soo. you've successfully started yourself a domain. And since you want
to use it on your host exclusively you are confident enough to
passthrough the host CPU model, like this:
<cpu mode='host-passthrough'/>
Then, after a while, you want to save the domain into a file (e.g.
virsh save dom dom.save). And here comes the trouble. The file consist
of two parts: Libvirt header (containing domain XML among other
things), and qemu migration data. Now, the domain XML in the header is
formatted using special flags (VIR_DOMAIN_XML_SECURE |
VIR_DOMAIN_XML_UPDATE_CPU | VIR_DOMAIN_XML_INACTIVE |
VIR_DOMAIN_XML_MIGRATABLE).
Then, on your way back from the bar, you think of changing something
in the XML in the saved file (we have a command for it after all), say
listen address for graphics console. So you successfully type in the
command:
virsh save-image-edit dom.save
Change all the bits, and exit the editor. But instead of success
you're left with sad error message:
error: unsupported configuration: Target CPU model <null> does not
match source Pentium Pro
Sigh. Digging into the code you see lines, where we check for ABI
stability. The new XML you've produced is compared with the old one
from the saved file to see if qemu ABI will break or not. Wait, what?
We are using different flags to parse the XML you've provided so we
were just lucky it worked in some cases? Yep, that's right.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As virDomainNumatuneSet now doesn't allocate the virDomainNuma object
any longer it's not necessary to pass the pointer to a pointer to store
the object as it will not change any longer.
While touching the parameter definitions I've also changed the name of
the parameter to "numa".
https://bugzilla.redhat.com/show_bug.cgi?id=1126762
Commit 43b67f introduced a deadlock issue when we use numatune
to change numa settings to a vm in session mode.
Jump to endjob instead of jump to cleanup.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The qemuDomainHelperGetVcpus attempted to report an error when the
vcpupids info was NULL. Unfortunately earlier code would clamp the
value of 'maxinfo' to 0 when nvcpupids was 0, so the error reporting
would end up being skipped.
This lead to 'virsh vcpuinfo <dom>' just returning an empty list
instead of giving the user a clear error.
In the event we're falling into the code that tries to create the file
in a forked environment (VIR_FILE_OPEN_FORK) we pass different mode bits,
but those are never set because the virFileOpenForceOwnerMode has a check
if the OPEN_FORCE_MODE bit is set before attempting to change the mode.
Since this is a special case it seems reasonable to set u+rw,g+rw,o
Export the required helpers and add backend code to hotplug RNG devices.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Some code paths have special logic depending on the page size
reported by sysconf, which in turn affects the test results.
We must mock this so tests always have a consistent page size.
This patch enables synchronization of the host macvtap
device options with the guest device's in response to the
NIC_RX_FILTER_CHANGED event.
The following device options will be synchronized:
* PROMISC
* MULTICAST
* ALLMULTI
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1158034
If we're expecting to create a file somewhere and that fails for some
reason during qemuOpenFileAs, then we unlink the path we're attempting
to create leaving no way to determine what the "existing" privileges,
protections, or labels are that caused the failure (open, change owner
and group, change mode, etc.).
Furthermore, if we fall into the path where we'll be opening / creating
the file using VIR_FILE_OPEN_FORK, we need to first unlink/delete the file
we created in the first path; otherwise, the attempt by the child process
to open as some specific user:group may fail because the file was already
created using nfsnobody:nfsnobody. Again, if we didn't create the file we
don't want to blindly delete what already exists. Thus, a second reason for
the original check to set need_unlink to false when we find the file with
CREAT set, but already existing.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id '540c339a' to fix issues with reference counting and transient
domains moved the qemuDomainObjEndAsyncJob call prior to the attempt to
restart the guest CPU's resulting in an error:
error: Failed to save domain rhel70 to /tmp/pl/rhel70.save
error: internal error: unexpected async job 3
when (ret != 0) - eg, the error path from qemuDomainSaveMemory.
This patch will adjust the logic to call the EndAsyncJob only after
we've tried to restart the guest CPUs. It also needs to adjust the
test for qemuDomainRemoveInactive to add the ret == 0 condition.
Additionally, if we get to endjob: because of some error earlier, then
we need to save that error in the event the CPU restart logic fails.
We don't want to return the error from CPU restart failure, rather we
want to return the error from the failed save that caused us to fall
into the retry to start the CPU logic.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1183890
When we try to update a xml to a image file, we will clear the
graphics passwd settings, because we do not pass VIR_DOMAIN_XML_SECURE
to qemuDomainDefCopy, qemuDomainDefFormatBuf won't format the passwd.
Add VIR_DOMAIN_XML_SECURE flag when we call qemuDomainDefCopy
in qemuDomainSaveImageUpdateDef.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The code modifies the domain configuration but doesn't take a MODIFY
type job to do so.
This patch also fixes a few very long lines of code around the touched
parts.
The ACL check didn't check the VIR_DOMAIN_XML_SECURE flag and the
appropriate permission for it. Found via code inspection while fixing
permissions for save images.
Depending on the context, either error out if the domain
has disappeared in the meantime, or just ignore the value
to allow marking the function as ATTRIBUTE_RETURN_CHECK.
https://bugzilla.redhat.com/show_bug.cgi?id=1161024
In the device type-specific functions, exit early
if the domain has disappeared, because the cleanup
should have been done by qemuProcessStop.
Check the return value in processDeviceDeletedEvent
and qemuProcessUpdateDevices.
Skip audit and removing the device from live def because
it has already been cleaned up.
The virDomainDefineXMLFlags and virDomainCreateXML APIs both
gain new flags allowing them to be told to validate XML.
This updates all the drivers to turn on validation in the
XML parser when the flags are set
Make a local copy of the disk alias instead of pointing
to the domain definition, which might get freed if
the domain dies while we're in monitor.
Also exit early if that happens.
Exit the monitor right after we've done with it to get
the virDomainObjPtr lock back, otherwise we might be accessing
vm->def while it's being cleaned up by qemuProcessStop.
If the domain crashed while we were in the monitor, exit
early instead of changing vm->def which is now the persistent
definition.
Commit e3435caf fixed hot-plugging of vcpus with strict memory pinning
on NUMA hosts, but unfortunately it also broke updating number of vcpus
for offline guests using our API.
The issue is that we try to create a cpu cgroup for non-running guest
which fails as there are no cgroups for that domain. We should create
cgroups and update cpuset.mems only if we are hot-plugging.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When create inactive external snapshot, after update disk definitions,
virDomainSaveConfig is needed, if not after restart libvirtd the new snapshot
file definitions in xml will be lost.
Reproduce steps:
1. prepare a shut off guest
$ virsh domstate rhel7 && virsh domblklist rhel7
shut off
Target Source
------------------------------------------------
vda /var/lib/libvirt/images/rhel7.img
2. create external disk snapshot
$ virsh snapshot-create rhel7 --disk-only && virsh domblklist rhel7
Domain snapshot 1417882967 created
Target Source
------------------------------------------------
vda /var/lib/libvirt/images/rhel7.1417882967
3. restart libvirtd then check guest source file
$ service libvirtd restart && virsh domblklist rhel7
Redirecting to /bin/systemctl restart libvirtd.service
Target Source
------------------------------------------------
vda /var/lib/libvirt/images/rhel7.img
This was first reported by Eric Blake
http://www.redhat.com/archives/libvir-list/2014-December/msg00369.html
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
https://bugzilla.redhat.com/show_bug.cgi?id=1135339 documents some
confusing behavior when a user tries to start an inactive block
commit in a second connection while there is already an on-going
active commit from a first connection. Eventually, qemu will
support multiple simultaneous block jobs, but as of now, it does
not; furthermore, libvirt also needs an overhaul before we can
support simultaneous jobs. So, the best way to avoid confusing
ourselves is to quit relying on qemu to tell us about the situation
(where we risk getting in weird states) and instead forbid a
duplicate block commit ourselves.
Note that we are still relying on qemu to diagnose attempts to
interrupt an inactive commit (since we only track XML of an active
commit), but as inactive commit is less confusing for libvirt to
manage, there is less that can go wrong by leaving that detection
up to qemu.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Hoist check for
active commit to occur earlier outside of conditions.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1177723
When setting new bandwidth limits via
virDomainSetInterfaceParameters, the old ones are cleared first.
However, if setting the new ones fails, the old are already gone
and interface is left in inconsistent state. Therefore, right
before failing we ought to try to restore the old bandwidth.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Add the possibility to have more than one IP address configured for a
domain network interface. IP addresses can also have a prefix to define
the corresponding netmask.
There is one problem that causes various errors in the daemon. When
domain is waiting for a job, it is unlocked while waiting on the
condition. However, if that domain is for example transient and being
removed in another API (e.g. cancelling incoming migration), it get's
unref'd. If the first call, that was waiting, fails to get the job, it
unref's the domain object, and because it was the last reference, it
causes clearing of the whole domain object. However, when finishing the
call, the domain must be unlocked, but there is no way for the API to
know whether it was cleaned or not (unless there is some ugly temporary
variable, but let's scratch that).
The root cause is that our APIs don't ref the objects they are using and
all use the implicit reference that the object has when it is in the
domain list. That reference can be removed when the API is waiting for
a job. And because each domain doesn't do its ref'ing, it results in
the ugly checking of the return value of virObjectUnref() that we have
everywhere.
This patch changes qemuDomObjFromDomain() to ref the domain (using
virDomainObjListFindByUUIDRef()) and adds qemuDomObjEndAPI() which
should be the only function in which the return value of
virObjectUnref() is checked. This makes all reference counting
deterministic and makes the code a bit clearer.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Coverity flagged commit 0282ca45 as introducing a memory leak;
in all my refactoring to make capacity probing conditional on
whether the image is non-raw, I missed deleting the unconditional
probe.
* src/qemu/qemu_driver.c (qemuStorageLimitsRefresh): Drop
redundant assignment.
Signed-off-by: Eric Blake <eblake@redhat.com>
Wire up backing chain recursion. For the first time, it is now
possible to get libvirt to expose that qemu tracks read statistics
on backing files, as well as report maximum extent written on a
backing file during a block-commit operation.
For a running domain, where one of the two images has a backing
file, I see the traditional output:
$ virsh domstats --block testvm2
Domain: 'testvm2'
block.count=2
block.0.name=vda
block.0.path=/tmp/wrapper.qcow2
block.0.rd.reqs=1
block.0.rd.bytes=512
block.0.rd.times=28858
block.0.wr.reqs=0
block.0.wr.bytes=0
block.0.wr.times=0
block.0.fl.reqs=0
block.0.fl.times=0
block.0.allocation=0
block.0.capacity=1310720000
block.0.physical=200704
block.1.name=vdb
block.1.path=/dev/sda7
block.1.rd.reqs=0
block.1.rd.bytes=0
block.1.rd.times=0
block.1.wr.reqs=0
block.1.wr.bytes=0
block.1.wr.times=0
block.1.fl.reqs=0
block.1.fl.times=0
block.1.allocation=0
block.1.capacity=1310720000
vs. the new output:
$ virsh domstats --block --backing testvm2
Domain: 'testvm2'
block.count=3
block.0.name=vda
block.0.path=/tmp/wrapper.qcow2
block.0.rd.reqs=1
block.0.rd.bytes=512
block.0.rd.times=28858
block.0.wr.reqs=0
block.0.wr.bytes=0
block.0.wr.times=0
block.0.fl.reqs=0
block.0.fl.times=0
block.0.allocation=0
block.0.capacity=1310720000
block.0.physical=200704
block.1.name=vda
block.1.path=/dev/sda6
block.1.backingIndex=1
block.1.rd.reqs=0
block.1.rd.bytes=0
block.1.rd.times=0
block.1.wr.reqs=0
block.1.wr.bytes=0
block.1.wr.times=0
block.1.fl.reqs=0
block.1.fl.times=0
block.1.allocation=327680
block.1.capacity=786432000
block.2.name=vdb
block.2.path=/dev/sda7
block.2.rd.reqs=0
block.2.rd.bytes=0
block.2.rd.times=0
block.2.wr.reqs=0
block.2.wr.bytes=0
block.2.wr.times=0
block.2.fl.reqs=0
block.2.fl.times=0
block.2.allocation=0
block.2.capacity=1310720000
I may later do a patch that trims the output to avoid 0 stats,
particularly for backing files (which are more likely to have
0 stats, at least for write statistics when no block-commit
is performed). Also, I still plan to expose physical size
information (qemu doesn't expose it yet, so it requires a stat,
and for block devices, a further open/seek operation). But
this patch is good enough without worrying about that yet.
* src/qemu/qemu_driver.c (QEMU_DOMAIN_STATS_BACKING): New internal
enum bit.
(qemuConnectGetAllDomainStats): Recognize new user flag, and pass
details to...
(qemuDomainGetStatsBlock): ...here, where we can do longer recursion.
(qemuDomainGetStatsOneBlock): Output new field.
Signed-off-by: Eric Blake <eblake@redhat.com>
In order to report stats on backing chains, we need to separate
the output of stats for one block from how we traverse blocks.
* src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Split...
(qemuDomainGetStatsOneBlock): ...into new helper.
Signed-off-by: Eric Blake <eblake@redhat.com>
A coming patch will make it optionally possible to list backing
chain block stats; in this mode of operation, block.counts is no
longer the number of <disks> in the domain, but the number of
blocks in the array being reported. We still want block.count
listed first, but rather than iterate the tree twice (once to
count, and once to list stats), it's easier to just touch things
up after the fact.
* src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Compute count
after the fact.
Signed-off-by: Eric Blake <eblake@redhat.com>
The prior refactoring can now be put to use. With the same domain
as the earlier commit 7b49926 (one qcow2 disk and an empty
cdrom drive):
$ virsh domstats --block foo
Domain: 'foo'
block.count=2
block.0.name=hda
block.0.path=/var/lib/libvirt/images/foo.qcow2
block.0.allocation=1309614080
block.0.capacity=42949672960
block.0.physical=1309671424
block.1.name=hdc
* src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Use
qemuStorageLimitsRefresh to report offline statistics.
Signed-off-by: Eric Blake <eblake@redhat.com>
Create a helper function that can be reused for gathering block
info from virDomainListGetStats.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Split guts...
(qemuStorageLimitsRefresh): ...into new helper function.
Signed-off-by: Eric Blake <eblake@redhat.com>
The documentation for virDomainBlockInfo was confusing: it stated
that 'physical' was the size of the container, then gave an example
of it being the amount of storage used by a sparse file (that is,
for a sparse raw image on a regular file, the wording implied
capacity==physical, while allocation was smaller; but the example
instead claimed physical==allocation). Since we use 'physical' for
the last offset of a block device, we should do likewise for
regular files.
Furthermore, the example claimed that for a qcow2 regular file,
allocation==physical. At the time the code was first written,
this was true (qcow2 files were allocated sequentially, and were
never sparse, so the last sector written happened to also match
the disk space occupied); but modern qemu does much better and
can punch holes for a qcow2 with allocation < physical.
Basically, after this patch, the three fields are now reliably
mapped as:
'capacity' - how much storage the guest can see (equal to
physical for raw images, determined by image metadata otherwise)
'allocation' - how much storage the image occupies (similar to
what 'du' would report)
'physical' - the last offset of the image (similar to what 'ls'
would report)
'capacity' can be larger than 'physical' (such as for a qcow2
image that does not vary much from a backing file) or smaller
(such as for a qcow2 file with lots of internal snapshots).
Likewise, 'allocation' can be (slightly) larger than 'physical'
(such as counting the tail of cluster allocations required to
round a file size up to filesystem granularity) or smaller
(for a sparse file). A block-resize operation changes capacity
(which, for raw images, also changes physical); many non-raw
images automatically grow physical and allocation as necessary
when starting with an allocation smaller than capacity; and even
when capacity and physical stay unchanged, allocation can change
when converting sectors from holes to data or back.
Note that this does not change semantics for qcow2 images stored
on block devices; there, we still rely on qemu to report the
highest written extent for allocation. So using this API to
track when to extend a block device because a qcow2 image is
about to exceed a threshold will not see any changes.
Also, note that virStorageVolInfo is unfortunately limited to
just 'capacity' and 'allocation' (we can't expand it to add
'physical', although we can expand the XML to add it there);
historically, that struct's 'allocation' value has reported
file size for qcow2 files (what this patch terms 'physical'
for a domain block device), but disk usage for raw files (what
this patch terms 'allocation'). So follow-up patches will be
needed to make storage volumes report the same allocation
values and get at physical values, where those differ.
* include/libvirt/libvirt-domain.h (_virDomainBlockInfo): Tweak
documentation to match saner definition.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): For regular
files, physical size is capacity, not allocation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Ultimately, we want to avoid read()ing a file while qemu is running.
We still have to open() block devices to determine their physical
size, but that is safer. This patch rearranges code to group
together all code that reads the image, to make it easier for later
patches to skip the metadata collection when possible.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Check for empty
disk up front. Place metadata reading next to use.
Signed-off-by: Eric Blake <eblake@redhat.com>
A future patch will allow recursion into backing chains when
collecting block stats. This patch should not change behavior,
but merely moves out the common code that will be reused once
recursion is enabled, and adds the parameter that will turn on
recursion.
* src/qemu/qemu_monitor.h (qemuMonitorGetAllBlockStatsInfo)
(qemuMonitorBlockStatsUpdateCapacity): Add recursion parameter,
although it is ignored for now.
* src/qemu/qemu_monitor.h (qemuMonitorGetAllBlockStatsInfo)
(qemuMonitorBlockStatsUpdateCapacity): Likewise.
* src/qemu/qemu_monitor_json.h
(qemuMonitorJSONGetAllBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacity): Likewise.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetAllBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacity): Add parameter, and
split...
(qemuMonitorJSONGetOneBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacityOne): ...into helpers.
(qemuMonitorJSONGetBlockStatsInfo): Update caller.
* src/qemu/qemu_driver.c (qemuDomainGetStatsBlock): Update caller.
* src/qemu/qemu_migration.c (qemuMigrationCookieAddNBD): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Right now, grabbing blockinfo always calls stat on the disk, then
opens the image to determine the capacity, using a throw-away
virStorageSourcePtr. This has a couple of drawbacks:
1. We are calling stat and opening a file on every invocation of
the API. However, there are cases where the stats should NOT be
changing between successive calls (if a domain is running, no
one should be changing the physical size of a block device or raw
image behind our backs; capacity of read-only files should not
be changing; and we are the gateway to the block-resize command
to know when the capacity of read-write files should be changing).
True, we still have to use stat in some cases (a sparse raw file
changes allocation if it is read-write and the amount of holes is
changing, and a read-write qcow2 image stored in a file changes
physical size if it was not fully pre-allocated). But for
read-only images, even this should be something we can remember
from the previous time, rather than repeating every call.
2. We want to enhance the power of virDomainListGetStats, by
sharing code. But we already have a virStorageSourcePtr for
each disk, and it would be easier to reuse the common structure
than to have to worry about the one-off virDomainBlockInfoPtr.
While this patch does not optimize reuse of information in point
1, it does get us closer to being able to do so; by updating a
structure that survives between consecutive calls.
* src/util/virstoragefile.h (_virStorageSource): Add physical, to
mirror virDomainBlockInfo; rearrange fields to match public struct.
(virStorageSourceCopy): Copy the new field.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Store into
storage source, then copy to block info.
Signed-off-by: Eric Blake <eblake@redhat.com>
In order for a future patch to virDomainListGetStats to reuse
some code for determining disk usage of offline domains, we
need to make it easier to pull out part of the guts of grabbing
blockinfo. The current implementation grabs a job fairly late
in the game, while getstats will already own a job; reordering
things so that the job is always grabbed up front in both
functions will make it easier to pull out the common code.
This patch results in grabbing a job in cases where one was not
previously needed, but as it is a query job, it should not be
noticeably slower.
This patch touches the same code as the fix for CVE-2014-6458
(commit b799259); in that patch, we avoided hotplug changing
a disk reference during the time of obtaining a monitor lock
by copying all data we needed and no longer referencing disk;
this patch goes the other way and ensures that by holding the
job, the disk cannot be changed so we no longer need to worry
about the disk being invalidated across the monitor lock.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Rearrange job
control to be outside of disk information.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit e3435caf added cleanup code to qemuDomainSetVcpusFlags() that was
not supposed to reset the error. Usual procedure was done, saving the
error to temporary variable, but it was never free'd, but rather leaked.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When hot-plugging a VCPU into the guest, kvm needs to allocate some data
from the DMA zone, which might be in a memory node that's not allowed in
cpuset.mems. Basically the same problem as there was with starting the
domain and due to which commit 7e72ac7878
exists. This patch just extends it to hotplugging as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1161540
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Instead of setting the value of cpuset.mems once when the domain starts
and then re-calculating the value every time we need to change the child
cgroup values, leave the cgroup alone and rather set the child data
every time there is new cgroup created. We don't leave any task in the
parent group anyway. This will ease both current and future code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1174154
When we use attach-device add a hostdev or chr device which have a
iscsi address or others (just like guest agent, subsys iscsi disk...),
we will find there is no basic controller for our new attached device.
Somtimes this will make guest cannot start after we add them (although
they can start at the second time).
Signed-off-by: Luyao Huang <lhuang@redhat.com>
We can change vnc password by using virDomainUpdateDeviceFlags API with
live flag. But it can't be changed with config flag. Error is reported as
below.
error: Operation not supported: persistent update of device 'graphics' is not supported
This patch supports the graphics arguments changed with config flag.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
A logic bug in qemuConnectGetAllDomainStats makes the code mark the
monitor as available when qemuDomainObjBeginJob fails, instead of when
it succeeds, as the correct flow requires.
This patch fixes the check and updates the code documentation
accordingly.
Broken by commit 57023c0a3a.
Signed-off-by: Francesco Romani <fromani@redhat.com>
