Commit Graph

168 Commits

Author SHA1 Message Date
Doug Goldstein
7457cbe871 VMware: Make version parsing testable and add tests
This splits up the version parsing code into a callable API like QEMU
help/version string parsing so that we can test it as we need to add
additional patterns for newer versions/products.
2013-09-20 08:23:31 -05:00
Eric Blake
ceaa536d49 maint: ignore recently-added test
* .gitignore: Ignore metadatatest.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-09-17 10:24:41 -06:00
Eric Blake
7f626e478d build: use automake subdir-objects
Automake 2.0 will enable subdir-objects by default; in preparation
for that change, automake 1.14 outputs LOADS of warnings:

daemon/Makefile.am:38: warning: source file '../src/remote/remote_protocol.c' is in a subdirectory,
daemon/Makefile.am:38: but option 'subdir-objects' is disabled
automake-1.14: warning: possible forward-incompatibility.
automake-1.14: At least a source file is in a subdirectory, but the 'subdir-objects'
automake-1.14: automake option hasn't been enabled.  For now, the corresponding output
automake-1.14: object file(s) will be placed in the top-level directory.  However,
automake-1.14: this behaviour will change in future Automake versions: they will
automake-1.14: unconditionally cause object files to be placed in the same subdirectory
automake-1.14: of the corresponding sources.
automake-1.14: You are advised to start using 'subdir-objects' option throughout your
automake-1.14: project, to avoid future incompatibilities.
daemon/Makefile.am:38: warning: source file '../src/remote/lxc_protocol.c' is in a subdirectory,
daemon/Makefile.am:38: but option 'subdir-objects' is disabled
...

As automake 1.9 also supported this option, and the previous patches
fixed up the code base to work with it, it is safe to now turn it on
unconditionally.

* configure.ac (AM_INIT_AUTOMAKE): Enable subdir-objects.
* .gitignore: Ignore .dirstamp directories.
* src/Makefile.am (PDWTAGS, *-protocol-struct): Adjust to
new subdir-object location of .lo files.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-09-09 12:04:03 -06:00
Daniel P. Berrange
da13f2c70c Add documentation for access control system
This adds two new pages to the website, acl.html describing
the general access control framework and permissions models,
and aclpolkit.html describing the use of polkit as an
access control driver.

page.xsl is modified to support a new syntax

  <div id="include" filename="somefile.htmlinc"/>

which will cause the XSL transform to replace that <div>
with the contents of 'somefile.htmlinc'. We use this in
the acl.html.in file, to pull the table of permissions
for each libvirt object. This table is autogenerated
from the enums in src/access/viraccessperms.h by the
genaclperms.pl script.

newapi.xsl is modified so that the list of permissions
checks shown against each API will link to the description
of the permissions in acl.html

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-08-09 17:13:02 +01:00
Daniel P. Berrange
38550ae809 Add an example config file for virtlockd
The virtlockd daemon supports an /etc/libvirt/virtlockd.conf
config file, but we never installed a default config, nor
created any augeas scripts. This change addresses that omission.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-08-09 15:03:04 +01:00
Daniel P. Berrange
6ff0cffd55 Add a man page for virtlockd daemon
Create a virtlockd.pod.in file containing the man page
content for virtlockd.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-08-09 11:56:34 +01:00
Dan Walsh
54d69f540c Introduce a virt-login-shell binary
Add a virt-login-shell binary that can be set as a user's
shell, such that when they login, it causes them to enter
the LXC container with a name matching their user name.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-08-08 16:36:31 +01:00
Daniel P. Berrange
664ab2801d Add info about access control checks into API reference
So that app developers / admins know what access control checks
are performed for each API, this patch extends the API docs
generator to include details of the ACLs for each.

The gendispatch.pl script is extended so that it generates
a simple XML describing ACL rules, eg.

  <aclinfo>
    ...
    <api name='virConnectNumOfDomains'>
      <check object='connect' perm='search_domains'/>
      <filter object='domain' perm='getattr'/>
    </api>
    <api name='virDomainAttachDeviceFlags'>
      <check object='domain' perm='write'/>
      <check object='domain' perm='save' flags='!VIR_DOMAIN_AFFECT_CONFIG|VIR_DOMAIN_AFFECT_LIVE'/>
      <check object='domain' perm='save' flags='VIR_DOMAIN_AFFECT_CONFIG'/>
    </api>
    ...
  </aclinfo>

The newapi.xsl template loads the XML files containing the ACL
rules and generates a short block of HTML for each API describing
the parameter checks and return value filters (if any).

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-08-08 11:59:46 +01:00
Peter Krempa
5c94dfdd76 tests: Add qemuagenttest
Add a basic test framework with two simple tests to test guest agent
interaction.
2013-07-31 14:25:43 +02:00
Daniel P. Berrange
dff93f8cab Add API for calling systemd-machined's DBus API
To register virtual machines and containers with systemd-machined,
and thus have cgroups auto-created, we need to talk over DBus.
This is somewhat tedious code, so introduce a dedicated function
to isolate the DBus call in one place.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-22 13:09:58 +01:00
Daniel P. Berrange
834c9c9459 Introduce virDBusCallMethod & virDBusMessageRead methods
Doing DBus method calls using libdbus.so is tedious in the
extreme. systemd developers came up with a nice high level
API for DBus method calls (sd_bus_call_method). While
systemd doesn't use libdbus.so, their API design can easily
be ported to libdbus.so.

This patch thus introduces methods virDBusCallMethod &
virDBusMessageRead, which are based on the code used for
sd_bus_call_method and sd_bus_message_read. This code in
systemd is under the LGPLv2+, so we're license compatible.

This code is probably pretty unintelligible unless you are
familiar with the DBus type system. So I added some API
docs trying to explain how to use them, as well as test
cases to validate that I didn't screw up the adaptation
from the original systemd code.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-22 13:09:58 +01:00
Michal Privoznik
0fc12bca08 tests: Introduce qemuhotplugtest
As my punishment for the break in 7f15ebc7 (fixed in 752596b5dd) I'm
introducing this test to make sure it won't happen again. Currently,
only test for <graphics/> is supported.
2013-06-25 17:00:56 +02:00
Daniel P. Berrange
686026225e Auto-generate helpers for checking access control rules
Extend the 'gendispatch.pl' script to be able to generate
three new types of file.

- 'aclheader' - defines signatures of helper APIs for
  doing authorization checks. There is one helper API
  for each API requiring an auth check. Any @acl
  annotations result in a method being generated with
  a suffix of 'EnsureACL'. If the ACL check requires
  examination of flags, an extra 'flags' param will be
  present. Some examples

  extern int virConnectBaselineCPUEnsureACL(void);
  extern int virConnectDomainEventDeregisterEnsureACL(virDomainDefPtr domain);
  extern int virDomainAttachDeviceFlagsEnsureACL(virDomainDefPtr domain, unsigned int flags);

  Any @aclfilter annotations resuilt in a method being
  generated with a suffix of 'CheckACL'.

  extern int virConnectListAllDomainsCheckACL(virDomainDefPtr domain);

  These are used for filtering individual objects from APIs
  which return a list of objects

- 'aclbody' - defines the actual implementation of the
  methods described above. This calls into the access
  manager APIs. A complex example:

    /* Returns: -1 on error (denied==error), 0 on allowed */
    int virDomainAttachDeviceFlagsEnsureACL(virConnectPtr conn,
                                            virDomainDefPtr domain,
                                            unsigned int flags)
    {
        virAccessManagerPtr mgr;
        int rv;

        if (!(mgr = virAccessManagerGetDefault()))
            return -1;

        if ((rv = virAccessManagerCheckDomain(mgr,
                                              conn->driver->name,
                                              domain,
                                              VIR_ACCESS_PERM_DOMAIN_WRITE)) <= 0) {
            virObjectUnref(mgr);
            if (rv == 0)
                virReportError(VIR_ERR_ACCESS_DENIED, NULL);
            return -1;
        }
        if (((flags & (VIR_DOMAIN_AFFECT_CONFIG|VIR_DOMAIN_AFFECT_LIVE)) == 0) &&
            (rv = virAccessManagerCheckDomain(mgr,
                                              conn->driver->name,
                                              domain,
                                              VIR_ACCESS_PERM_DOMAIN_SAVE)) <= 0) {
            virObjectUnref(mgr);
            if (rv == 0)
                virReportError(VIR_ERR_ACCESS_DENIED, NULL);
            return -1;
        }
        if (((flags & (VIR_DOMAIN_AFFECT_CONFIG)) == (VIR_DOMAIN_AFFECT_CONFIG)) &&
            (rv = virAccessManagerCheckDomain(mgr,
                                              conn->driver->name,
                                              domain,
                                              VIR_ACCESS_PERM_DOMAIN_SAVE)) <= 0) {
            virObjectUnref(mgr);
            if (rv == 0)
                virReportError(VIR_ERR_ACCESS_DENIED, NULL);
            return -1;
        }
        virObjectUnref(mgr);
        return 0;
    }

- 'aclsyms' - generates a linker script to export the
   APIs to drivers. Some examples

  virConnectBaselineCPUEnsureACL;
  virConnectCompareCPUEnsureACL;

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-06-24 15:25:19 +01:00
Daniel P. Berrange
b904bba7f4 Add a policy kit access control driver
Add an access control driver that uses the pkcheck command
to check authorization requests. This is fairly inefficient,
particularly for cases where an API returns a list of objects
and needs to check permission for each object.

It would be desirable to use the polkit API but this links
to glib with abort-on-OOM behaviour, so can't be used. The
other alternative is to speak to dbus directly

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-06-24 15:24:36 +01:00
Eric Blake
de483052a2 maint: follow recommended practice for using LGPL
https://www.gnu.org/licenses/gpl-howto.html states:

You should also include a copy of the license itself somewhere in the
distribution of your program. All programs, whether they are released
under the GPL or LGPL, should include the text version of the GPL. In
GNU programs the license is usually in a file called COPYING.

If you are releasing your program under the LGPL, you should also
include the text version of the LGPL, usually in a file called
COPYING.LESSER. Please note that, since the LGPL is a set of
additional permissions on top of the GPL, it's important to include
both licenses so users have all the materials they need to understand
their rights.

* configure.ac (COPYING): No more games with non-git file.
* COPYING: New file, copied from gnulib.
* COPYING.LIB: Rename...
* COPYING.LESSER: ...to this.
* .gitignore: Track licenses in git.
* cfg.mk (exclude_file_name_regexp--sc_copyright_address): Tweak
rule.
* libvirt.spec.in (daemon, client, python): Reflect rename.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-05-20 14:15:21 -06:00
Ján Tomko
a011479d47 .gitignore: add fchosttest 2013-05-13 17:16:54 +02:00
Daniel P. Berrange
31989e66c6 Add a test case for the fdstream file read/write code
Add a test case which exercises the virFDStreamOpenFile
and virFDStreamCreateFile methods. Ensure that both the
synchronous and non-blocking iohelper code paths work.
This validates the regression recently fixed which
broke reading in non-blocking mode

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-10 19:57:18 +01:00
Daniel P. Berrange
d14524701a Add a test suite for cgroups functionality
Some aspects of the cgroups setup / detection code are quite subtle
and easy to break. It would greatly benefit from unit testing, but
this is difficult because the test suite won't have privileges to
play around with cgroups. The solution is to use monkey patching
via LD_PRELOAD to override the fopen, open, mkdir, access functions
to redirect access of cgroups files to some magic stubs in the
test suite.

Using this we provide custom content for the /proc/cgroup and
/proc/self/mounts files which report a fixed cgroup setup. We
then override open/mkdir/access so that access to the cgroups
filesystem gets redirected into files in a temporary directory
tree in the test suite build dir.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-15 17:35:31 +01:00
Daniel P. Berrange
15d8511b41 Add a test suite for keycode mapping functions
Validate that translations between different keycode sets
are functioning.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-08 10:03:20 +01:00
Gene Czarcinski
1cd2078c88 rename tests/conftest.c
To prevent confusion with configure's popular name
for a file, rename conftest.c to test_conf.c which
is consistent with the invoking test_conf.sh
Signed-off-by: Gene Czarcinski <gene@czarc.net>
2013-03-19 13:13:28 -06:00
Daniel P. Berrange
3aabe27247 Define internal APIs for managing identities
Introduce a local object virIdentity for managing security
attributes used to form a client application's identity.
Instances of this object are intended to be used as if they
were immutable, once created & populated with attributes

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-03-19 13:37:37 +00:00
Doug Goldstein
24cf110e48 Add autogenerated lxc_protocol.[ch] to gitignore
/src/lxc/lxc_protocol.[ch] is autogenerated so add it to .gitignore
2013-02-18 08:57:57 -06:00
Eric Blake
a18452d0d2 storage: test backing chain traversal
Testing our backing chain handling will make it much easier to
ensure that we avoid issues in the future.  If only I had written
this test before I first caused several regressions...

* tests/virstoragetest.c: New test.
* tests/Makefile.am (test_programs): Build it.
* .gitignore: Ignore new files.
2013-02-15 16:07:01 -07:00
Eric Blake
c6f1060ca7 util: add virendian.h macros
We have several cases where we need to read endian-dependent
data regardless of host endianness; rather than open-coding
these call sites, it will be nicer to funnel things through
a macro.

The virendian.h file can be expanded to add writer functions,
and/or 16-bit access patterns, if needed.  Also, if we need
to turn things into a function to avoid multiple evaluations
of buf, that can be done later.  But for now, a macro worked.

* src/util/virendian.h: New file.
* src/Makefile.am (UTIL_SOURCES): Ship it.
* tests/virendiantest.c: New test.
* tests/Makefile.am (test_programs, virendiantest_SOURCES): Run
the test.
* .gitignore: Ignore built file.
2013-02-12 09:00:15 -07:00
Martin Kletzander
3d36b1a4b0 Ignore '.trs' files
When doing checks with automake, there are '<testname>.trs' files left
behind, that might or might not be usable, however these show up in
'git status' even though we definitely don't want them to be tracked
in the repository'.  Automake adds the '--trs-files' option by default
since commit 0c81b43f711fb861f04227ced8dba889596d9c43 [1], which
consequently (from 1.13 in my case) started leaving these files behind
along with '<testname>.log' files as well (which we already ignore).

[1] http://git.savannah.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=0c81b43
2013-01-30 09:37:03 +01:00
Daniel P. Berrange
9c9d4d32d3 Add a port allocator class
Introduce a virPortAllocator for managing TCP port allocations.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-16 11:02:58 +00:00
Michal Privoznik
584cd5c279 .gitignore: Sort alphabetically 2013-01-15 13:32:33 +01:00
Daniel P. Berrange
3d1596b048 Introduce an LXC specific public API & library
This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.

The actual APIs are

  int virDomainLxcOpenNamespace(virDomainPtr domain,
                                int **fdlist,
                                unsigned int flags);

  int virDomainLxcEnterNamespace(virDomainPtr domain,
                                 unsigned int nfdlist,
                                 int *fdlist,
                                 unsigned int *noldfdlist,
                                 int **oldfdlist,
                                 unsigned int flags);

which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.

NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:58:34 +00:00
Daniel P. Berrange
907a39e735 Add a test suite for validating SELinux labelling
There are many aspects of the guest XML which result in the
SELinux driver applying file labelling. With the increasing
configuration options it is desirable to test this behaviour.
It is not possible to assume that the test suite has the
ability to set SELinux labels. Most filesystems though will
support extended attributes. Thus for the purpose of testing,
it is possible to extend the existing LD_PRELOAD hack to
override setfilecon() and getfilecon() to simply use the
'user.libvirt.selinux' attribute for the sake of testing.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-14 13:40:04 +00:00
Daniel P. Berrange
014afe6501 Rename lxc_protocol.x to lxc_monitor_protocol.x
To avoid confusion between the LXC driver <-> controller
monitor RPC protocol and the libvirt-lxc.so <-> libvirtd public
RPC protocol, rename the former to lxc_monitor_protocol.x

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-08 09:21:08 +00:00
Cole Robinson
ff93b865cd .gitignore: add tests/sysinfotest 2012-12-17 14:40:48 -05:00
Daniel P. Berrange
eb8268a4f6 Add a virtlockd client as a lock driver impl
This adds a 'lockd' lock driver which is just a client which
talks to the lockd daemon to perform all locking. This will
be the default lock driver for any hypervisor which needs one.

* src/Makefile.am: Add lockd.so plugin
* src/locking/lock_driver_lockd.c: Lockd driver impl

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-13 15:26:57 +00:00
Daniel P. Berrange
0e49b83912 Implement dispatch functions for lock protocol in virtlockd
Introduce a lock_daemon_dispatch.c file which implements the
server side dispatcher the RPC APIs previously defined in the
lock protocol.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-13 15:26:57 +00:00
Daniel P. Berrange
ad39fd83a8 Define a wire protocol for talking to the virtlockd daemon
The virtlockd daemon will be responsible for managing locks
on virtual machines. Communication will be via the standard
RPC infrastructure. This provides the XDR protocol definition

* src/locking/lock_protocol.x: Wire protocol for virtlockd
* src/Makefile.am: Include lock_protocol.[ch] in virtlockd

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-13 15:26:57 +00:00
Daniel P. Berrange
c57e3d8994 Introduce basic infrastructure for virtlockd daemon
The virtlockd daemon will maintain locks on behalf of libvirtd.
There are two reasons for it to be separate

 - Avoid risk of other libvirtd threads accidentally
   releasing fcntl() locks by opening + closing a file
   that is locked
 - Ensure locks can be preserved across libvirtd restarts.
   virtlockd will need to be able to re-exec itself while
   maintaining locks. This is simpler to achieve if its
   sole job is maintaining locks

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-12-13 15:26:57 +00:00
Cole Robinson
d13155c20c tools: Only install guests init script if --with-init=script=redhat
Most of this deals with moving the libvirt-guests.sh script which
does all the work to /usr/libexec, so it can be shared by both
systemd and traditional init. Previously systemd depended on
the script being in /etc/init.d

Required to fix https://bugzilla.redhat.com/show_bug.cgi?id=789747
2012-12-11 19:54:37 -05:00
Daniel P. Berrange
76c1fd33c8 Introduce APIs for splitting/joining strings
This introduces a few new APIs for dealing with strings.
One to split a char * into a char **, another to join a
char ** into a char *, and finally one to free a char **

There is a simple test suite to validate the edge cases
too. No more need to use the horrible strtok_r() API,
or hand-written code for splitting strings.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-30 20:05:43 +00:00
liguang
b27b712c24 gitignore: ignore more files
ignore cscope.in.out, cscope.po.out

Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
2012-11-05 15:56:42 +01:00
Michal Privoznik
ffa62d06a8 gitignore: Ignore 'tags' 2012-10-31 16:47:34 +01:00
Peter Krempa
41bf06e96a maint: Sort .gitignore
Sorting of the .gitignore file was broken after the last addition. After
a clean build the scripts re-sort it making the working tree dirty.
2012-10-26 14:39:55 +02:00
Eric Blake
caea10bf75 maint: ignore unsaved emacs files
I did a 'git add .', then realized that it ended up trying to
add the emacs lock file for a corresponding file that I had not
yet saved all my edits; thankfully I noticed it in time.  Since
we already exclude other temporary files, this makes the most
sense for preventing such a mistake from actually hitting upstream.

* .gitignore: Add .#* to the exclude list.
2012-10-25 16:12:46 -06:00
Cole Robinson
7b21981cdb Autogenerate AUTHORS
AUTHORS.in tracks the maintainers, as well as some folks who were
previously in AUTHORS but don't have a git commit with proper
attribution.

Generated output is sorted alphabetically and lacks pretty spacing, so
tweak AUTHORS.in to follow the same format.

Additionally, drop the syntax-check rule that previously validated
AUTHORS against git log.
2012-10-19 12:44:56 -04:00
Daniel P. Berrange
eca72d4759 Introduce an internal API for handling file based lockspaces
The previously introduced virFile{Lock,Unlock} APIs provide a
way to acquire/release fcntl() locks on individual files. For
unknown reason though, the POSIX spec says that fcntl() locks
are released when *any* file handle referring to the same path
is closed. In the following sequence

  threadA: fd1 = open("foo")
  threadB: fd2 = open("foo")
  threadA: virFileLock(fd1)
  threadB: virFileLock(fd2)
  threadB: close(fd2)

you'd expect threadA to come out holding a lock on 'foo', and
indeed it does hold a lock for a very short time. Unfortunately
when threadB does close(fd2) this releases the lock associated
with fd1. For the current libvirt use case for virFileLock -
pidfiles - this doesn't matter since the lock is acquired
at startup while single threaded an never released until
exit.

To provide a more generally useful API though, it is necessary
to introduce a slightly higher level abstraction, which is to
be referred to as a "lockspace".  This is to be provided by
a virLockSpacePtr object in src/util/virlockspace.{c,h}. The
core idea is that the lockspace keeps track of what files are
already open+locked. This means that when a 2nd thread comes
along and tries to acquire a lock, it doesn't end up opening
and closing a new FD. The lockspace just checks the current
list of held locks and immediately returns VIR_ERR_RESOURCE_BUSY.

NB, the API as it stands is designed on the basis that the
files being locked are not being otherwise opened and used
by the application code. One approach to using this API is to
acquire locks based on a hash of the filepath.

eg to lock /var/lib/libvirt/images/foo.img the application
might do

   virLockSpacePtr lockspace = virLockSpaceNew("/var/lib/libvirt/imagelocks");
   lockname = md5sum("/var/lib/libvirt/images/foo.img");
   virLockSpaceAcquireLock(lockspace, lockname);

NB, in this example, the caller should ensure that the path
is canonicalized before calculating the checksum.

It is also possible to do locks directly on resources by
using a NULL lockspace directory and then using the file
path as the lock name eg

   virLockSpacePtr lockspace = virLockSpaceNew(NULL);
   virLockSpaceAcquireLock(lockspace, "/var/lib/libvirt/images/foo.img");

This is only safe to do though if no other part of the process
will be opening the files. This will be the case when this
code is used inside the soon-to-be-reposted virlockd daemon

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-10-16 15:45:55 +01:00
Cole Robinson
e1019e9e84 Only keep one polkit rules file
Just tweak it at build time depending on what polkit version we are
building for.
2012-10-14 15:21:18 -04:00
Richard W.M. Jones
5090c576e3 Add a ./run script for running programs from the local directory.
With this script you can run libvirt programs without needing to
install them first.  You just have to do for example:

  ./run ./tools/virsh [args ...]

If you are already in the tools/ subdirectory, then the following
command will also work:

  ../run ./virsh [...]

You can also run the C programs under valgrind like this:

  ./run valgrind [valgrind opts...] ./program

or under gdb:

  ./run gdb --args ./program

This also works with sudo (eg. if you need root access for libvirt):

  sudo ./run ./tools/virsh list --all

Derived from libguestfs and simplified.  The ./run script in
libguestfs is much more sophisticated:

https://github.com/libguestfs/libguestfs/blob/master/run.in
2012-09-18 10:59:16 +01:00
Richard W.M. Jones
481dfbaed4 gitignore: Ignore .gdb_history file. 2012-09-18 10:03:52 +01:00
Hu Tao
0fc89098a6 New functions for virBitmap
In many places we store bitmap info in a chunk of data
(pointed to by a char *), and have redundant codes to
set/unset bits. This patch extends virBitmap, and convert
those codes to use virBitmap in subsequent patches.
2012-09-17 14:59:36 -04:00
Daniel P. Berrange
48d112210d Introduce a test suite for the JSON monitor
Take advantage of the previously added monitor helpers to
create a test suite for the QEMU JSON monitor impl. As a
proof of concept, this tests the 'qemuMonitorGetStatus'
implementation

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-07 13:18:09 +01:00
Daniel P. Berrange
9136032a66 Add test case for SELinux label generation
This test case validates the correct generation of SELinux labels
for VMs, wrt the current process label. Since we can't actually
change the label of the test program process, we create a shared
library libsecurityselinuxhelper.so which overrides the getcon()
and setcon() libselinux.so functions. When started the test case
will check to see if LD_PRELOAD is set, and if not, it will
re-exec() itself setting LD_PRELOAD=libsecurityselinuxhelper.so

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-08-21 11:37:57 +01:00
Martin Kletzander
2818359075 docs: autogenerate search.php
This patch makes search.php autogenerated from search.php.in, thus
removing hardcoded menus, footer etc. and the search.php is added to
.gitignore.

There is new rule added for *.php files (to make it bit less
hardcoded) that takes *.php.code.in and injects it inside the
generated *.php (xslt was not happy about php code in the source xml).
2012-08-10 10:58:38 +02:00
Daniel P. Berrange
0c9fd4cfe9 Rewrite virAtomic APIs using GLib's atomic ops code
There are a few issues with the current virAtomic APIs

 - They require use of a virAtomicInt struct instead of a plain
   int type
 - Several of the methods do not implement memory barriers
 - The methods do not implement compiler re-ordering barriers
 - There is no Win32 native impl

The GLib library has a nice LGPLv2+ licensed impl of atomic
ops that works with GCC, Win32, or pthreads.h that addresses
all these problems. The main downside to their code is that
the pthreads impl uses a single global mutex, instead of
a per-variable mutex. Given that it does have a Win32 impl
though, we don't expect anyone to seriously use the pthread.h
impl, so this downside is not significant.

* .gitignore: Ignore test case
* configure.ac: Check for which atomic ops impl to use
* src/Makefile.am: Add viratomic.c
* src/nwfilter/nwfilter_dhcpsnoop.c: Switch to new atomic
  ops APIs and plain int datatype
* src/util/viratomic.h: inline impls of all atomic ops
  for GCC, Win32 and pthreads
* src/util/viratomic.c: Global pthreads mutex for atomic
  ops
* tests/viratomictest.c: Test validate to validate safety
  of atomic ops.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-08-02 11:50:59 +01:00
Michal Privoznik
6c0cf39523 gitignore: Reorder alphabetically
One of our latest patches added some files to .gitignore. However,
not in the right place leaving the file not sorted. Since my git
is set up to sort these files contents, fix this issue as it keeps
showing up in git status.
2012-08-01 13:40:56 +02:00
Daniel P. Berrange
9117fcb263 Run an RPC protocol over the LXC controller monitor
This defines a new RPC protocol to be used between the LXC
controller and the libvirtd LXC driver. There is only a
single RPC message defined thus far, an asynchronous "EXIT"
event that is emitted just before the LXC controller process
exits. This provides the LXC driver with details about how
the container shutdown - normally, or abnormally (crashed),
thus allowing the driver to emit better libvirt events.

Emitting the event in the LXC controller requires a few
little tricks with the RPC service. Simply calling the
virNetServiceClientSendMessage does not work, since this
merely queues the message for asynchronous processing.
In addition the main event loop is no longer running at
the point the event is emitted, so no I/O is processed.

Thus after invoking virNetServiceClientSendMessage it is
necessary to mark the client as being in "delayed close"
mode. Then the event loop is run again, until the client
completes its close - this happens only after the queued
message has been fully transmitted. The final complexity
is that it is not safe to run virNetServerQuit() from the
client close callback, since that is invoked from a
context where the server is locked. Thus a zero-second
timer is used to trigger shutdown of the event loop,
causing the controller to finally exit.

* src/Makefile.am: Add rules for generating RPC protocol
  files and dispatch methods
* src/lxc/lxc_controller.c: Emit an RPC event immediately
  before exiting
* src/lxc/lxc_domain.h: Record the shutdown reason
  given by the controller
* src/lxc/lxc_monitor.c, src/lxc/lxc_monitor.h: Register
  RPC program and event handler. Add callback to let
  driver receive EXIT event.
* src/lxc/lxc_process.c: Use monitor exit event to decide
  what kind of domain event to emit
* src/lxc/lxc_protocol.x: Define wire protocol for LXC
  controller monitor.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-07-30 13:07:43 +01:00
Daniel P. Berrange
1bfb47dfe6 Make ESX & Hyper-V code generator safe with parallel builds
If from a clean GIT checkout 'make -j 8' is run, the ESX
and Hyper-V code will be generated multiple times over.
This is because there are multiple files being generated
from one invocation of the generator script. make does not
realize this and so invokes the generator once per file.
This doesn't matter with serialized builds, but with
parallel builds multiple instances of the generator get
run at once.

make[2]: Entering directory `/home/berrange/src/virt/libvirt/src'
  GEN    util/virkeymaps.h
  GEN    remote/remote_protocol.h
  GEN    remote/remote_client_bodies.h
  GEN    remote/qemu_protocol.h
  GEN    remote/qemu_client_bodies.h
  GEN    esx/esx_vi_methods.generated.c
  GEN    esx/esx_vi_methods.generated.h
  GEN    esx/esx_vi_methods.generated.macro
  GEN    esx/esx_vi_types.generated.c
  GEN    esx/esx_vi_types.generated.h
  GEN    esx/esx_vi_types.generated.typedef
  GEN    esx/esx_vi_types.generated.typedef
  GEN    esx/esx_vi_types.generated.typeenum
  GEN    esx/esx_vi_types.generated.typetostring
  GEN    esx/esx_vi_types.generated.typefromstring
  GEN    esx/esx_vi_types.generated.h
  GEN    esx/esx_vi_types.generated.c
  GEN    esx/esx_vi_methods.generated.h
  GEN    esx/esx_vi_methods.generated.c
  GEN    esx/esx_vi_methods.generated.macro
  GEN    esx/esx_vi.generated.h
  GEN    esx/esx_vi.generated.c
  GEN    esx/esx_vi_types.generated.typeenum
  GEN    esx/esx_vi_types.generated.typedef
  GEN    esx/esx_vi_types.generated.typeenum
  GEN    esx/esx_vi_types.generated.typetostring
  GEN    esx/esx_vi_types.generated.typefromstring
  GEN    esx/esx_vi_types.generated.h
  GEN    esx/esx_vi_types.generated.c
  GEN    esx/esx_vi_methods.generated.h
  ...snip...
  GEN    hyperv/hyperv_wmi.generated.h
  GEN    libvirt_qemu_probes.h
  GEN    locking/qemu-sanlock.conf
  GEN    hyperv/hyperv_wmi.generated.c
  GEN    rpc/virnetprotocol.h
  GEN    hyperv/hyperv_wmi_classes.generated.typedef
  GEN    hyperv/hyperv_wmi_classes.generated.h
  GEN    hyperv/hyperv_wmi_classes.generated.c
  GEN    rpc/virkeepaliveprotocol.h
  GEN    remote/remote_protocol.c
  GEN    remote/qemu_protocol.c
  GEN    rpc/virkeepaliveprotocol.c
  GEN    rpc/virnetprotocol.c
  GEN    libvirt.def

Prevent this using a timestamp file to control generation,
as was previously done for the python bindings in commit
a7868e0131

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-07-23 15:49:15 +01:00
Sebastian Wiedenroth
29bc4fe646 Add a sheepdog backend for the storage driver
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.

A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.

A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.

In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.

  <disk type='network'>
    ...
    <source protocol="sheepdog" name="vdi_name">
      <host name="localhost" port="7000"/>
    </source>
  </disk>

To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.

Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
2012-07-18 20:08:27 +01:00
Guido Günther
16a8f5e5b9 Add /tools/libvirt-guests.service to .gitignore
since it's an autogenerated file
2012-06-26 21:40:27 +02:00
Daniel P. Berrange
6a714d31d0 Switch automated builds to use Mingw64 toolchain instead of Mingw32
The Mingw32 toolchain is broadly obsoleted by the Mingw64 toolchain.
The latter has been adopted by Fedora 17 and newer. Maintaining a
RPM spec for Mingw32 is a needless burden, so switch to a Mingw64
RPM spec (which provides 32 & 64 bit builds).

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-06-25 10:41:10 +01:00
Eric Blake
fb59cf7a58 build: fix testing of augeas files in VPATH builds
Without this fix, a VPATH build (such as used by ./autobuild.sh)
fails with messages like:

make[3]: Entering directory `/home/remote/eblake/libvirt-tmp2/build/daemon'
../../build-aux/augeas-gentest.pl libvirtd.conf ../../daemon/test_libvirtd.aug.in test_libvirtd.aug
cannot read libvirtd.conf: No such file or directory at ../../build-aux/augeas-gentest.pl line 38.

Since the test files are not part of the tarball, we can generate
them into the build dir, but rather than create a subdirectory
just for the test file, it is easier to test them directly in
libvirt.git/src.

* daemon/Makefile.am (AUG_GENTEST): Factor out definition.
(test_libvirtd.aug): Look for correct file.
* src/Makefile.am (AUG_GENTEST): Use $(PERL).
(qemu/test_libvirtd_qemu.aug, lxc/test_libvirtd_lxc.aug)
(locking/test_libvirt_sanlock.aug): Rename to avoid subdirectories.
(check-augeas-qemu, check-augeas-lxc, check-augeas-sanlock): Reflect
location of built tests.
* configure.ac (PERL): Substitute perl.
2012-05-30 09:29:32 -06:00
Daniel P. Berrange
de9758ae9b Autogenerate augeas test case from default config files
When adding new config file parameters, the corresponding
additions to the augeas lens' are constantly forgotten.
Also there are augeas test cases, these don't catch the
error, since they too are never updated.

To address this, the augeas test cases need to be auto-generated
from the example config files.

* build-aux/augeas-gentest.pl: Helper to generate an
  augeas test file, substituting in elements from the
  example config files
* src/Makefile.am, daemon/Makefile.am: Switch to
  auto-generated augeas test cases
* daemon/test_libvirtd.aug, daemon/test_libvirtd.aug.in,
  src/locking/test_libvirt_sanlock.aug,
  src/locking/test_libvirt_sanlock.aug.in,
  src/lxc/test_libvirtd_lxc.aug,
  src/lxc/test_libvirtd_lxc.aug.in,
  src/qemu/test_libvirtd_qemu.aug,
  src/qemu/test_libvirtd_qemu.aug.in: Remove example
  config file data, replacing with a ::CONFIG:: placeholder

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-05-28 11:07:12 +01:00
Eric Blake
d2e30e9851 maint: ignore more files from version control
* .gitignore: Exempt recent test binary and probes.h name change.
2012-05-24 21:01:58 -06:00
Cole Robinson
c964b6aac1 docs: Serialize running apibuild.py
Use a witness file approach like we do for python/generator.py,
as suggested by Eric. Fixes the build issue reported here:

https://www.redhat.com/archives/libvir-list/2012-April/msg01435.html

Signed-off-by: Cole Robinson <crobinso@redhat.com>
2012-04-27 12:37:47 -04:00
Michal Privoznik
b71af85686 gitignore: Reorder alphabetically
Recent git reorders .gitignore alphabetically. However, changes are
not committed and I am tired of discarding these changes from
my patches.
2012-04-13 13:47:13 +02:00
Daniel P. Berrange
a9694a8e18 Replace daemon-conf test script with a proper test case
The daemon-conf test script continues to be very fragile to
changes in libvirt. It currently fails 1 time in 3/4 due
to race conditions in startup/shutdown of the test script.

Replace it with a proper test case tailored to the code
being tested

* tests/Makefile.am: Remove daemon-conf, add libvirtdconftest
* tests/daemon-conf: Delete obsolete test
* tests/libvirtdconftest.c: Test config file handling
2012-04-10 11:13:44 +01:00
Eric Blake
98ada9ab70 build: drop obsolete qparams test
Otherwise, 'make check' breaks since commit bc1ff160 deleted
qparams.h.  A later patch will ensure that viruri takes over
what qparams used to do.

* tests/qparamtest.c (mymain): Delete, now that we have viruri.
* tests/Makefile.am (check_PROGRAMS, TESTS, qparamtest_SOURCES):
Delete old test.
* .gitignore: Add recent test additions.
2012-03-23 16:12:58 -06:00
Laine Stump
f51be165e4 remove daemon/probes.h from .gitignore
The file daemon/probes.h used to be generated as part of a build, but
is no longer used. However, a stale copy of it lying around could
cause a build to fail. Removing it from .gitignore will make it more
likely someone will notice that they have it lying around.
2012-03-08 17:00:40 -05:00
Josh Durgin
f27f616ff8 qemu: unescape HMP commands before converting them to json
QMP commands don't need to be escaped since converting them to json
also escapes special characters. When a QMP command fails, however,
libvirt falls back to HMP commands. These fallback functions
(qemuMonitorText*) do their own escaping, and pass the result directly
to qemuMonitorHMPCommandWithFd. If the monitor is in json mode, these
pre-escaped commands will be escaped again when converted to json,
which can result in the wrong arguments being sent.

For example, a filename test\file would be sent in json as
test\\file.

This prevented attaching an image file with a " or \ in its name in
qemu 1.0.50, and also broke rbd attachment (which uses backslashes to
escape some internal arguments.)

Reported-by: Masuko Tomoya <tomoya.masuko@gmail.com>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2012-02-27 16:06:02 -07:00
Peter Krempa
13545647ba maint: Add test output files to .gitignore
Commit 8f00276c8a consolidated other
.gitignore files to the master one, but forgot to add some test output
files.
2012-02-06 18:27:40 +01:00
Eric Blake
8f00276c8a maint: consolidate several .gitignore files
Unlike .cvsignore under CVS, git allows for ignoring nested
names.  We weren't very consistent where new tests were
being ignored (some in .gitignore, some in tests/.gitignore),
and I found it easier to just consolidate everything.

* .gitignore: Subsume entries from subdirectories.
* daemon/.gitignore: Delete.
* docs/.gitignore: Likewise.
* docs/devhelp/.gitignore: Likewise.
* docs/html/.gitignore: Likewise.
* examples/dominfo/.gitignore: Likewise.
* examples/domsuspend/.gitignore: Likewise.
* examples/hellolibvirt/.gitignore: Likewise.
* examples/openauth/.gitignore: Likewise.
* examples/domain-events/events-c/.gitignore: Likewise.
* include/libvirt/.gitignore: Likewise.
* src/.gitignore: Likewise.
* src/esx/.gitignore: Likewise.
* tests/.gitignore: Likewise.
* tools/.gitignore: Likewise.
2012-02-03 15:27:16 -07:00
Eric Blake
93f93f5161 build: fix missing include
Fix a build failure:

virt-host-validate.c: In function 'main':
virt-host-validate.c:82:5: error: implicit declaration of function 'setlocale' [-Werror=implicit-function-declaration]
virt-host-validate.c:82:5: error: nested extern declaration of 'setlocale' [-Werror=nested-externs]
virt-host-validate.c:82:20: error: 'LC_ALL' undeclared (first use in this function)

* tools/virt-host-validate.c: Add <locale.h>.
* .gitignore: Ignore built executable.
2012-01-27 11:18:35 -07:00
Eric Blake
19896423f7 hash: minor touchups
On RHEL5, I got:
util/virrandom.c:66: warning: nested extern declaration of '_gl_verify_function66' [-Wnested-externs]

The fix is to hoist the verify earlier.  Also some other hodge-podge
fixes I noticed while reviewing Dan's recent series.

* .gitignore: Ignore new test.
* src/util/cgroup.c: Bump copyright year.
* src/util/virhash.c: Fix typo in description.
* src/util/virrandom.c (virRandomBits): Mark doc comment, and
hoist assert to silence older gcc.
2012-01-26 15:27:10 -07:00
Jiri Denemark
4acd358a76 Define keepalive protocol
The keepalive program has two procedures: PING, and PONG.
Both are used only in asynchronous messages and the sender doesn't wait
for any reply. However, the party which receives PING messages is
supposed to react by sending PONG message the other party, but no
explicit binding between PING and PONG messages is made. For backward
compatibility neither server nor client are allowed to send keepalive
messages before checking that remote party supports them.
2011-11-24 11:44:08 +01:00
Eric Blake
27b3b303d9 snapshot: test domainsnapshot indentation
Add a test for the simple parts of my indentation changes, and
fix the fallout.

* tests/domainsnapshotxml2xmltest.c: New test.
* tests/Makefile.am (domainsnapshotxml2xmltest_SOURCES): Build it.
* src/conf/domain_conf.c (virDomainSnapshotDefFormat): Avoid NULL
deref, match documented order.
* src/conf/domain_conf.h (virDomainSnapshotDefFormat): Add const.
* tests/domainsnapshotxml2xmlout/all_parameters.xml: Tweak output.
* tests/domainsnapshotxml2xmlout/disk_snapshot.xml: Likewise.
* tests/domainsnapshotxml2xmlout/full_domain.xml: Likewise.
* .gitignore: Exempt new binary.
2011-10-20 16:02:16 -06:00
Eric Blake
99e2505210 build: ignore test executable
* .gitignore: Add exemption.
2011-10-19 13:49:59 -06:00
Daniel P. Berrange
8e44e5593e Prevent crash from dlclose() of libvirt.so
When libvirt calls virInitialize it creates a thread local
for the virErrorPtr storage, and registers a callback to
cleanup memory when a thread exits. When libvirt is dlclose()d
or otherwise made non-resident, the callback function is
removed from memory, but the thread local may still exist
and if a thread later exists, it will invoke the callback
and SEGV. There may also be other thread locals with callbacks
pointing to libvirt code, so it is in general never safe to
unload libvirt.so from memory once initialized.

To allow dlclose() to succeed, but keep libvirt.so resident
in memory, link with '-z nodelete'. This issue was first
found with the libvirt CIM provider, but can potentially
hit many of the dynamic language bindings which all ultimately
involve dlopen() in some way, either on libvirt.so itself,
or on the glue code for the binding which in turns links
to libvirt

* configure.ac, src/Makefile.am: Ensure libvirt.so is linked
  with -z nodelete
* cfg.mk, .gitignore, tests/Makefile.am, tests/shunloadhelper.c,
  tests/shunloadtest.c: A test case to unload libvirt while
  a thread is still running.
2011-09-16 15:51:31 -06:00
Eric Blake
72f865dd23 maint: ignore generated files
* .gitignore: Exempt recently added generated files.
2011-09-14 09:30:33 -06:00
Matthias Bolte
e224b6f8fb hyperv: Add OpenWSMAN based client for the Hyper-V WMI API
Add a generator script to generate the structs and serialization
information for OpenWSMAN.

openwsman.h collects workarounds for problems in OpenWSMAN <= 2.2.6.
There are also disabled sections that would use ws_serializer_free_mem
but can't because it's broken in OpenWSMAN <= 2.2.6. Patches to fix
this have been posted upstream.
2011-08-26 17:52:55 +02:00
Eric Blake
322d1cfc78 maint: ignore generated file
I did 'git add .' while in the middle of 'make syntax-check', and
it picked up a temporary file that should not be committed.

* .gitignore: Ignore sc_* from syntax check.
2011-08-18 17:34:56 -06:00
Eric Blake
8231539830 maint: ignore generated file
* .gitignore: Ignore qemu-sanlock.conf.
2011-08-15 14:42:43 -06:00
Matthias Bolte
b590866bdb freebsd: Fix build problem due to picking up the wrong libvirt.h
Gettext annoyingly modifies CPPFLAGS in-place, putting
-I/usr/local/include into the search patch if libintl headers
must be used from that location.  But since we must support
automake 1.9.6 which lacks AM_CPPFLAGS, and since CPPFLAGS is used
prior to INCLUDES, this means that the build picks up the _old_
installed libvirt.h in priority to the in-tree version, leading
to all sorts of weird build failures on FreeBSD.

Fix this by teaching configure to undo gettext's actions, but
to keep any changes required by gettext at the end of INCLUDES
after all in-tree locations are used first.  Also requires
adding a wrapper Makefile.am and making gnulib-tool create
just gnulib.mk files during the bootstrap process.

Signed-off-by: Eric Blake <eblake@redhat.com>
2011-07-29 07:35:54 -06:00
Lai Jiangshan
0bbf87e91e util: add virtkeycode module
Add virtkey lib for usage-improvment and keycode translating.
Add 4 internal API for the aim

const char *virKeycodeSetTypeToString(int codeset);
int virKeycodeSetTypeFromString(const char *name);
int virKeycodeValueFromString(virKeycodeSet codeset, const char *keyname);
int virKeycodeValueTranslate(virKeycodeSet from_codeset,
                             virKeycodeSet to_offset,
                             int key_value);

* include/libvirt/libvirt.h.in: extend virKeycodeSet enum
* src/Makefile.am: add new virtkeycode module and rule to generate
  virkeymaps.h
* src/util/virkeycode.c src/util/virkeycode.h: new module
* src/util/virkeycode-mapgen.py: python generator for virkeymaps.h
  out of keymaps.csv
* src/libvirt_private.syms: extend private symbols for new module
* .gitignore: add generated virkeymaps.h
2011-07-21 15:57:47 +08:00
Eric Blake
97ee0953c6 build: detect doc generation failure
Commit 8665f85 introduced a slight regression in doc generation,
since make only quits a rule on the first failed command ending
with a newline rather than a semicolon.

* docs/Makefile.am (html/index.html): Don't use xmllint unless
xsltproc succeeded.
* .gitignore: Ignore recently updated stamp file name.
2011-07-19 07:34:34 -06:00
Eric Blake
1e1f65312f build: ignore generated file
* .gitignore: Exempt jsontest binary.
2011-06-30 12:15:56 -06:00
Daniel P. Berrange
df0b57a95a Convert libvirtd over to the new RPC handling APIs
This guts the libvirtd daemon, removing all its networking and
RPC handling code. Instead it calls out to the new virServerPtr
APIs for all its RPC & networking work

As a fallout all libvirtd daemon error reporting now takes place
via the normal internal error reporting APIs. There is no need
to call separate error reporting APIs in RPC code, nor should
code use VIR_WARN/VIR_ERROR for reporting fatal problems anymore.

* daemon/qemu_dispatch_*.h, daemon/remote_dispatch_*.h: Remove
  old generated dispatcher code
* daemon/qemu_dispatch.h, daemon/remote_dispatch.h: New dispatch
  code
* daemon/dispatch.c, daemon/dispatch.h: Remove obsoleted code
* daemon/remote.c, daemon/remote.h: Rewrite for new dispatch
  APIs
* daemon/libvirtd.c, daemon/libvirtd.h: Remove all networking
  code
* daemon/stream.c, daemon/stream.h: Update for new APIs
* daemon/Makefile.am: Link to libvirt-net-rpc-server.la
2011-06-28 17:33:19 +01:00
Eric Blake
2abb4616a0 build: avoid long line tests
'make syntax-check' regression introduced in commit 60b9c69.

* tests/networkxml2argvdata/*.argv: Break long lines.
2011-06-24 15:34:28 -06:00
Daniel P. Berrange
980a132a24 Defines the basics of a generic RPC protocol in XDR
This patch defines the basics of a generic RPC protocol in XDR.
This is wire ABI compatible with the original remote_protocol.x.
It takes everything except for the RPC calls / events from that
protocol

 - The basic header virNetMessageHeader (aka remote_message_header)
 - The error object virNetMessageError  (aka remote_error)
 - Two dummy objects virNetMessageDomain & virNetMessageNetwork
   sadly needed to keep virNetMessageError ABI compatible with
   the old remote_error

The RPC protocol supports method calls, async events and
bidirectional data streams as before

* src/Makefile.am: Add rules for generating RPC code from
  protocol & define a new libvirt-net-rpc.la helper library
* src/rpc/virnetprotocol.x: New generic RPC protocol
2011-06-24 11:48:10 +01:00
Eric Blake
ad962bcdaa * .gitignore: Exempt a new test binary. 2011-05-31 11:35:32 -06:00
Eric Blake
372ad899ba maint: ignore generated file
* .gitignore: Ignore recently added file.
2011-05-16 09:36:59 -06:00
Daniel P. Berrange
3496b7f500 build: Remove all generated RPC files from GIT
Stop storing the generated files for the remote protocol client
and server in source control. The generated files will still be
included in the result of 'make dist' to avoid end-users needing
to generate the files

Signed-off-by: Eric Blake <eblake@redhat.com>

Unfortunately, this means that the strings marked for translation
in generated files are not picked up by gnulib's syntax-check,
I'm working on fixing that in gnulib.

* .gitignore, cfg.mk, po/POTFILES.in: Reflect deletion.
2011-05-06 16:22:33 -06:00
Eric Blake
d80740b3a4 maint: ignore built file
* .gitignore: Add exemption for hashtest.
2011-04-18 09:30:49 -06:00
Eric Blake
02c39a2f6d build: fix gitignore sorting
Make it so we don't have to 'git add -f' particular files like
po/POTFILES.in all the time (tested by fixing one of our
special-case files as part of the patch).

* .gnulib: Update to latest.
* bootstrap: Resync from coreutils.
* .gitignore: Sort whitelist entries correctly, including ignoring
files rather than directories.
* m4/virt-compile-warnings.m4: Convert tabs to space.
2011-04-07 15:03:53 -06:00
Daniel P. Berrange
4825b521e2 Remove acinclude.m4 file
Split the bit acinclude.m4 file into smaller pieces named
as m4/virt-XXXXX.m4

* .gitignore: Ignore gettext related files
* acinclude.m4: Delete
* m4/virt-compile-warnings.m4: Checks for GCC compiler flags
* m4/virt-pkgconfig-back-compat.m4: Backcompat check for
  pkgconfig program
2011-04-05 11:39:44 +01:00
Eric Blake
e54a2f9340 maint: ignore new built file
* .gitignore: Exclude libvirt_iohelper.
2011-03-29 07:12:29 -06:00
Hu Tao
838f669682 Add vim configuration that makes vim auto-indent code 2011-03-17 17:08:51 -06:00
Eric Blake
ec28eb29b7 autobuild.sh: use VPATH build
Try to avoid future regressions on the VPATH front.

* autobuild.sh: Uncomment VPATH use.
* .gitignore: Exclude build directory.
2011-02-21 09:27:05 -07:00
Daniel Veillard
6675e00744 Release of libvirt-0.8.7
* configure.ac libvirt.spec.in docs/news.html.in: bump version and add
  documentation
* po/*po*: regenerate po and pot files
2011-01-04 03:37:17 +01:00
Eric Blake
3ea59d6acb maint: update .gitignore
* .gitignore: Ignore recent built file, sort.
2010-12-01 18:46:35 -07:00
Guido Günther
d7e2b2b4eb Ignore files generated by "make tags" 2010-11-30 17:20:18 +01:00
Eric Blake
144c06d4ee maint: update to latest gnulib
Allows bootstrap to work on FreeBSD, where gzip doesn't have a '.'
in its version; and silences false positives in the new
'make syntax-check' rule.

* .gnulib: Update to latest.
* bootstrap: Synchronize to upstream.
* .x-sc_bindtextdomain: New exemptions.
* Makefile.am (syntax_check_exceptions): Ship new file.
* .gitignore: Regenerate per latest bootstrap, anchor entries that
are only in the root directory, and consolidate entries from other
generated .gitignore files.
* build-aux/.gitignore, m4/.gitignore, po/.gitignore: Remove from
version control, since bootstrap generates them.
2010-11-17 10:13:12 -07:00
Jiri Denemark
c60c450bc3 maint: Commit .gitignore sorting done by bootstrap 2010-11-09 11:45:14 +01:00
Matthias Bolte
e65812d479 xen-proxy: Remove it entirely and use libvirtd instead
Suggested by danpb, as it's not up-to-date anymore and
lacks many functions that were added to libvirtd.
2010-11-08 22:00:35 +01:00