Just recently, qemu forbade specifying format for sourceless
disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense.
If there's no file to open, why specify its format. Anyway, I
have a domain like this:
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<target dev='hda' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
and obviously I am unable to start it. Therefore, a fix on our
side is needed too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id 'aeb1078ab' added a buildPool option and failure path which
calls virStoragePoolObjRemove, which unlocks the pool, clears the 'pool'
variable, and goto cleanup. However, at cleanup virStoragePoolObjUnlock
is called without check if pool is non NULL.
Commit id '70ffa02fc' added the data.file.append option to some
VIR_DOMAIN_CHR_TYPE_FILE cases in switch statements allowing the
code to "fall through" for the remainder of the cases. This causes
angst in code profiling tools, like Coverity since there is no break;
followed by more case conditions. Adjust the logic to be more specific
within each case.
Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
For completeness, use the VIR_TRISTATE_SWITCH_ABSENT for data.file.append
comparisons. Commit ids '70ffa02f' and '53a15aed' just went with the non
zero comparison.
Allow <name> and <uuid> anywhere under <domain>, not just at the top:
error:XML document failed to validate against schema: Unable to validate
doc against /usr/share/libvirt/schemas/domain.rng
Expecting an element name, got nothing
Invalid sequence in interleave
Element domain failed to validate content
Introduced with the first RelaxNG schema in commit c642103.
https://bugzilla.redhat.com/show_bug.cgi?id=1292131
We have few code samples there that are almost unreadable when formatted
because they are not indented properly. By indenting them they are
formatted as code and hence quite readable. Also adjust descriptions to
be comments and add semicolons so that the code sample looks like sample
of a working code.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While reviewing 1b43885d17 I've noticed a virReportError()
followed by a goto endjob; without setting the correct return
value. Problem is, if block job is so fast that it's bandwidth
does not fit into ulong, an error is reported. However, by that
time @ret is already set to 1 which means success. Since the
scenario can be hardly considered successful, we should return a
value meaning error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Required for the copyright year bump to keep 'make syntax-check'
happy, and also pulls in several portability fixes.
* .gnulib: Update to latest.
* bootstrap: Resync from upstream.
* gnulib/local/m4/ssize_t.m4.diff: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
The documentation (and comment in libvirtd.conf) says that the text in
a log filter is compared to the "source file name", and gives the
example of "util/json", but this is not correct (at least not since
commit 2835c1e, possibly earlier). It is instead compared to the
string given in the VIR_LOG_INIT() macro invocation at the top of each
source file, which is always "similar to but not the same as" the
source file name (in the example above, the proper name is
"util.json", while the file name is "util/virjson.c"). This patch
corrects the misstatement in both the documentation and in
libvirtd.conf.
Due to debug logs like this:
virPCIGetDeviceAddressFromSysfsLink:2432 : Attempting to resolve device path from device link '/sys/class/net/eth1/device/virtfn6'
logStrToLong_ui:2369 : Converted '0000:07:00.7' to unsigned int 0
logStrToLong_ui:2369 : Converted '07:00.7' to unsigned int 7
logStrToLong_ui:2369 : Converted '00.7' to unsigned int 0
logStrToLong_ui:2369 : Converted '7' to unsigned int 7
virPCIGetDeviceAddressFromSysfs:1947 : virPCIDeviceAddress 0000:07:00.7
virPCIGetVirtualFunctions:2554 : Found virtual function 7
printed *once for each SR-IOV Virtual Function* of a Physical Function
each time libvirt retrieved the list of VFs (so if the system has 128
VFs, there would be 900 lines of log for each call), the debug logs on
any system with a large number of VFs was dominated by "information"
that was possibly useful for debugging when the code was being
written, but is now useless for debugging of any problem on a running
system, and only serves to obscure the real useful information. This
overkill has no place in production code, so this patch removes it.
The previous error message just indicated that the desired response
couldn't be found, this patch tells what was desired, as well as
listing out the entire table that had been in the netlink response, to
give some kind of idea why it failed.
I noticed in a log file that we had failed to set a MAC address. The
log said which interface we were trying to set, but didn't give the
offending MAC address, which could have been useful in determining the
source of the problem. This patch modifies all three places in the
code that set MAC addresses to report the failed MAC as well as
interface.
This used to return 'unkown' and that was not correct.
A vol-dumpxml now returns:
<volume type='network'>
<name>image3</name>
<key>libvirt/image3</key>
<source>
</source>
<capacity unit='bytes'>10737418240</capacity>
<allocation unit='bytes'>10737418240</allocation>
<target>
<path>libvirt/image3</path>
<format type='raw'/>
</target>
</volume>
The RBD driver will now error out if a different format than RAW
is provided when creating a volume.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Valgrind complained:
==28277== 38 bytes in 1 blocks are definitely lost in loss record 298 of 957
==28277== at 0x4A06A2E: malloc (vg_replace_malloc.c:270)
==28277== by 0x82D7F57: __vasprintf_chk (in /lib64/libc-2.12.so)
==28277== by 0x52EF16A: virVasprintfInternal (stdio2.h:199)
==28277== by 0x52EF25C: virAsprintfInternal (virstring.c:514)
==28277== by 0x52B1FA9: virFileBuildPath (virfile.c:2831)
==28277== by 0x19B1947C: storageDriverAutostart (storage_driver.c:191)
==28277== by 0x19B196A7: storageStateAutoStart (storage_driver.c:307)
==28277== by 0x538527E: virStateInitialize (libvirt.c:793)
==28277== by 0x11D7CF: daemonRunStateInit (libvirtd.c:947)
==28277== by 0x52F4694: virThreadHelper (virthread.c:206)
==28277== by 0x6E08A50: start_thread (in /lib64/libpthread-2.12.so)
==28277== by 0x82BE93C: clone (in /lib64/libc-2.12.so)
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Valgrind complained:
==18990== 20 (16 direct, 4 indirect) bytes in 1 blocks are definitely lost in loss record 188 of 996
==18990== at 0x4A057BB: calloc (vg_replace_malloc.c:593)
==18990== by 0x5292E9B: virAllocN (viralloc.c:191)
==18990== by 0x2221E731: qemuMigrationCookieXMLParseStr (qemu_migration.c:1012)
==18990== by 0x2221F390: qemuMigrationEatCookie (qemu_migration.c:1413)
==18990== by 0x222228CE: qemuMigrationPrepareAny (qemu_migration.c:3463)
==18990== by 0x22224121: qemuMigrationPrepareDirect (qemu_migration.c:3865)
==18990== by 0x22251C25: qemuDomainMigratePrepare3Params (qemu_driver.c:12414)
==18990== by 0x5389EE0: virDomainMigratePrepare3Params (libvirt-domain.c:5107)
==18990== by 0x1278DB: remoteDispatchDomainMigratePrepare3ParamsHelper (remote.c:5425)
==18990== by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==18990== by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)
==18990== by 0x54052C7: virNetServerHandleJob (virnetserver.c:156)
==18990==
==18990== 20 (16 direct, 4 indirect) bytes in 1 blocks are definitely lost in loss record 189 of 996
==18990== at 0x4A057BB: calloc (vg_replace_malloc.c:593)
==18990== by 0x5292E9B: virAllocN (viralloc.c:191)
==18990== by 0x2221E731: qemuMigrationCookieXMLParseStr (qemu_migration.c:1012)
==18990== by 0x2221F390: qemuMigrationEatCookie (qemu_migration.c:1413)
==18990== by 0x222249D2: qemuMigrationRun (qemu_migration.c:4395)
==18990== by 0x22226365: doNativeMigrate (qemu_migration.c:4693)
==18990== by 0x22228E45: qemuMigrationPerform (qemu_migration.c:5553)
==18990== by 0x2225144B: qemuDomainMigratePerform3Params (qemu_driver.c:12621)
==18990== by 0x539F5D8: virDomainMigratePerform3Params (libvirt-domain.c:5206)
==18990== by 0x127305: remoteDispatchDomainMigratePerform3ParamsHelper (remote.c:5557)
==18990== by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==18990== by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)
If we're replacing the NBD data, it's simplest to free the old object
(including the disk list) and allocate a new one.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Valgrind complained:
==23975== Conditional jump or move depends on uninitialised value(s)
==23975== at 0x22255FA6: qemuDomainGetBlockJobInfo (qemu_driver.c:16538)
==23975== by 0x538E97C: virDomainGetBlockJobInfo (libvirt-domain.c:9685)
==23975== by 0x12F740: remoteDispatchDomainGetBlockJobInfoHelper (remote.c:2834)
==23975== by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==23975== by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)
==23975== by 0x54052C7: virNetServerHandleJob (virnetserver.c:156)
==23975== by 0x52F515B: virThreadPoolWorker (virthreadpool.c:145)
==23975== by 0x52F4668: virThreadHelper (virthread.c:206)
==23975== by 0x6E08A50: start_thread (in /lib64/libpthread-2.12.so)
==23975== by 0x82BE93C: clone (in /lib64/libc-2.12.so)
==23975==
==23975== Conditional jump or move depends on uninitialised value(s)
==23975== at 0x22255FB4: qemuDomainGetBlockJobInfo (qemu_driver.c:16542)
==23975== by 0x538E97C: virDomainGetBlockJobInfo (libvirt-domain.c:9685)
==23975== by 0x12F740: remoteDispatchDomainGetBlockJobInfoHelper (remote.c:2834)
==23975== by 0x53FF287: virNetServerProgramDispatch (virnetserverprogram.c:437)
==23975== by 0x540523D: virNetServerProcessMsg (virnetserver.c:135)
==23975== by 0x54052C7: virNetServerHandleJob (virnetserver.c:156)
==23975== by 0x52F515B: virThreadPoolWorker (virthreadpool.c:145)
==23975== by 0x52F4668: virThreadHelper (virthread.c:206)
==23975== by 0x6E08A50: start_thread (in /lib64/libpthread-2.12.so)
==23975== by 0x82BE93C: clone (in /lib64/libc-2.12.so)
If no matching block job is found, qemuMonitorGetBlockJobInfo returns 0
and we should not write anything to the caller-supplied
virDomainBlockJobInfo pointer.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
So, after bec787ee9d we are building virt-login-shell
independent of LXC driver. This is nice, but the binary is
enabled by default which makes no sense on mingw. In fact, it
triggers some compilation errors there:
CC virt_login_shell-virt-login-shell.o
../../tools/virt-login-shell.c: In function 'main':
../../tools/virt-login-shell.c:289:15: error: implicit declaration of function 'sysconf' [-Werror=implicit-function-declaration]
openmax = sysconf(_SC_OPEN_MAX);
^
../../tools/virt-login-shell.c:289:5: error: nested extern declaration of 'sysconf' [-Werror=nested-externs]
openmax = sysconf(_SC_OPEN_MAX);
^
../../tools/virt-login-shell.c:289:23: error: '_SC_OPEN_MAX' undeclared (first use in this function)
openmax = sysconf(_SC_OPEN_MAX);
^
../../tools/virt-login-shell.c:289:23: note: each undeclared identifier is reported only once for each function it appears in
cc1: all warnings being treated as errors
While we could workaround sysconf(_SC_OPEN_MAX) issue, the binary
itself makes no sense on systems where no LXC can be spawned.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is no functional change, but I find it disturbing that
something_LDADD contains PIE_LDFLAGS while something_LDFLAGS
doesn't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The manpage for sysconf() suggest including unistd.h as the
function is declared there. Even though we are not hitting any
compile issues currently, let's include the correct header file
instead of relying on some hidden include chain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So you have a libvirt volume that you want to wipe out. But lets
say that the volume is actually a file stored on a journaled
filesystem. Overwriting it with zeroes or a pattern does not mean
that corresponding physical location on the disk is overwritten
too, due to journaling. It's the same story with network based
volumes, copy-on-write filesystems, and so on. Since there is no
way that an userland application can write onto specific areas on
disk, all that we can do is document the fact.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In case of prlsdkLoadDomains fails, vzOpenDefault should
clear connection privateData pointer every time its
memory is actually freed.
Also it is not necessary to call vzConnectClose if a call
to vzOpenDefault fails, because they both make cleanup of
connection privateData.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
By default, QEMU truncates serial file on open. Sometimes, it could be weird -
for example, when we are trying to investigate some event, which occured several
restarts ago. This patch adds an ability to preserve previous content.
Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
Currently, there is no possibility for user to specify desired behaviour of
output to file - truncate or append. This patch adds an ability to explicitly
specify that user wants to preserve file's content on reopen.
Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
prlsdkCleanupBridgedNet call should be made strongly after
any actual domain deletion accurs. By doing this we avoid
any potential problems connected with second undefine call
when it is made after first one fails by some reason, and
we detect that network is already deleted.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Currently vz driver unregisters domains when undefine is called,
which is wrong because it contradicts with expected behavior.
All vz domains are persistent, which means that when one is
defined a new bundle directory containing meta data is created.
Undefining domains in a way we do now leaves those directories
undeleted, which prevents subsequent define call for the same
domain xml. I.e. the following sequence define->undefine->define
doesn't work now.
The patch fixes the problem by calling PrlVm_Delete instead of
PrlVm_Unreg detaching all disks prior actually doing this to
prevent images deletion.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We want to eventually factor out the code dealing with device detaching
and reattaching, so that we can share it and make sure it's called eg.
when 'virsh nodedev-detach' is used.
For that to happen, it's important that the lists of active and inactive
PCI devices are updated every time a device changes its state.
Instead of passing NULL as the last argument of virPCIDeviceDetach() and
virPCIDeviceReattach(), pass the proper list so that it can be updated.
This replaces the virPCIKnownStubs string array that was used
internally for stub driver validation.
Advantages:
* possible values are well-defined
* typos in driver names will be detected at compile time
* avoids having several copies of the same string around
* no error checking required when setting / getting value
The names used mirror those in the
virDomainHostdevSubsysPCIBackendType enumeration.
This internal function supports, in theory, binding to a different
stub driver than the one the PCI device has been configured to use.
In practice, it is only ever called like
virPCIDeviceBindToStub(dev, dev->stubDriver);
which makes its second parameter redundant. Get rid of it, along
with the extra string copy required to support it.
Commmit df8192aa introduced admin related rename and some minor
(caused by automated approach, aka sed) and some more severe isues along with
it. First reason to revert is the inconsistency with libvirt library.
Although we deal with the daemon directly rather than with a specific
hypervisor, we still do have a connection. That being said, contributors might
get under the impression that AdmDaemonNew would spawn/start a new daemon
(since it's admin API, why not...), or AdmDaemonClose would do the exact
opposite or they might expect DaemonIsAlive report overall status of the daemon
which definitely isn't the case.
The second reason to revert this patch is renaming virt-admin client. The
client tool does not necessarily have to reflect the names of the API's it's
using in his internals. An example would be 's/vshAdmConnect/vshAdmDaemon'
where noone can be certain of what the latter function really does. The former
is quite expressive about some connection magic it performs, but the latter does
not say anything, especially when vshAdmReconnect and vshAdmDisconnect were
left untouched.
From: Ian Campbell <ian.campbell@citrix.com>
xend prior to 4.0 understands vcpus as maxvcpus and vcpu_avail
as a bit map of which cpus are online (default is all).
xend from 4.0 onwards understands maxvcpus as maxvcpus and
vcpus as the number which are online (from 0..N-1). The
upstream commit (68a94cf528e6 "xm: Add maxvcpus support")
claims that if maxvcpus is omitted then the old behaviour
(i.e. obeying vcpu_avail) is retained, but AFAICT it was not,
in this case vcpu==maxcpus==online cpus. This is good for us
because handling anything else would be fiddly.
This patch changes parsing of the virDomainDef maxvcpus and vcpus
entries to use the corresponding 'maxvcpus' and 'vcpus' settings
from xm and xl config. It also drops use of the old Xen 3.x
'vcpu_avail' setting.
The change also removes the maxvcpus limit of MAX_VIRT_VCPUS (since
maxvcpus is simply a count, not a bit mask), which is particularly
crucial on ARM where MAX_VIRT_CPUS == 1 (since all guests are
expected to support vcpu placement, and therefore only the boot
vcpu's info lives in the shared info page).
Existing tests adjusted accordingly, and new tests added for the
'maxvcpus' setting.
https://bugzilla.redhat.com/show_bug.cgi?id=1281710
Commit id '3c7590e0a' added the flag to the rbd backend, but provided
no means via virsh to use the flag. This patch adds a '--delete-snapshots'
option to both the "undefine" and "vol-delete" commands.
For "undefine", the flag is combined with the "--remove-all-storage" flag
in order to add the appropriate flag for the virStorageVolDelete call;
whereas, for the "vol-delete" command, just the flag is sufficient since
it's only operating on one volume.
Currently only supported for rbd backends.
Although they've been present for quite a while, they weren't added
to the API definition, so add them there to make it clearer.
Currently only the RBD backend even checks for any flags.
The initial commit '74951eade' did not include the proper check for whether
any flags are supported by the driver.
Even though the driver doesn't support VIR_STORAGE_VOL_DELETE_ZEROED,
it still checks and allows the processing to continue
Also add the new VIR_STORAGE_VOL_DELETE_WITH_SNAPSHOTS since it is handled
as of commit id '3c7590e0a'.
Commit id '71ce4759' altered the cgroup processing with respect to the
call to virCgroupAddTask being moved out from lower layers into the calling
layers especially for qemu processing of emulator and vcpu threads. The
movement affected lxc insomuch as it is possible for a code path to
return a NULL cgroup *and* a 0 return status via virCgroupNewPartition
failure when virCgroupNewIgnoreError succeeded when virCgroupNewMachineManual
returns. Coverity pointed out that would cause virCgroupAddTask to core.
This patch will check for a NULL cgroup as well as the negative return
and just return the NULL cgroup to the caller (as it would have previously)
Remove use of xendConfigVersion in the s-expresion config formatter/parser
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Change all xml2sexpr tests to use the latest XEND_CONFIG_VERSION
(XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to
the latest version.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
