* src/esx/esx_util.c: esxUtil_ParseQuery() warns if a known query
parameter should be ignored due to the corresponding char/int pointer
being NULL, instead of silently ignoring it. Fix the control flow.
* src/esx/esx_vmx.c: add an extra type of addressType beside 'static'
and 'generated', 'vpx' indicates that the MAC address was generated
by a vCenter.
Calling qsort() on the disks array causes disk to be
unneccessarily re-ordered, potentially breaking the
ability to boot if the boot disk gets moved later in
the list. The new algorithm will insert a new disk as
far to the end of the list as possible, while being
ordered correctly wrt other disks on the same bus.
* src/domain_conf.c, src/domain_conf.h: Remove disk sorting
routines. Add API to insert a disk into existing list at
the optimal position, without resorting disks
* src/libvirt_private.syms: Export virDomainDiskInsert
* src/xend_internal.c, src/xm_internal.c: Remove calls to
qsort, use virDomainDiskInsert instead.
* src/qemu_driver.c: Remove calls to qsort, use virDoaminDiskInsert
instead. Fix reordering bugs when hotunplugging disks and
networks. Fix memory leak in disk/net unplug
* proxy/Makefile.am: Build storage_encryption_conf.c since its a
dependancy of domain_conf.c
* src/storage_encryption_conf.c: Disable XML parsing APis when
build under proxy
* src/test.c: Add a dummy no-op secrets driver for test suite
The if ((nlptr...)) implicitly assumes commptr != NULL (and that "buf"
starts with "cmd"). Make the assumption explicit, it will be broken in
a future patch.
* src/qemu_driver.c: Don't assume buffered monitor output echoes the
command.
The XML allows <encryption format='unencrypted'/>, this implementation
canonicalizes the internal representation so that "disk->encryption" is
non-NULL iff encryption information is available.
A domain with partial encryption information can be defined,
completeness of the information is not verified. The domain won't
start until the remaining information is added, of course.
* docs/formatdomain.html, docs/formatdomain.html.in: Document
new encryption options for disks
* docs/schemas/domain.rng: Pull in storage encryption schema
rules
* src/domain_conf.h, src/domain_conf.c: Wire up storage encryption
XML parsing/formatting APIs
Supports only virStorageVolCreateXML, not virStorageVolCreateXMLFrom.
Curiously, qemu-img does not need the passphrase for anything to create
an encrypted volume. This implementation thus does not need to touch
any secrets to work with cooperating clients. More generic passphrase
handling is added in the next patch.
* src/storage_backend.c: Request encryption when creating qcow/qcow2
files
* src/storage_backend_disk.c, src/storage_backend_fs.c,
src/storage_backend_logical.c: Refuse to create volumes with
encryption params set.
(The implementation is not very generic, but that can be very
easily rectified if/when new encryption formats appear.)
* src/storage_backend_fs.c: Probe for qcow/qcow2 encryption
algorithm field
The XML allows <encryption format='unencrypted'/>, this implementation
canonicalizes the internal representation so that "vol->encryption" is
non-NULL iff the volume is encrypted.
Note that partial encryption information (e.g. specifying an encryption
format, but not the key/passphrase) is valid, libvirt will automatically
choose value for the missing information during volume creation. The
user can read the volume XML, and use the unmodified <encryption> tag in
future operations (without having to be able to understand) its contents.
* docs/formatstorage.html, docs/formatstorage.html.in: Document
storage volume encryption options
* src/storage_conf.c, src/storage_conf.h: Hook up storage
encryption XML handling
* tests/storagevolschemadata/vol-qcow2.xml: Test case for encryption
schema changes
Define an <encryption> tag specifying volume encryption format and
format-depenedent parameters (e.g. passphrase, cipher name, key
length, key).
Currently the only defined parameter is a reference to a "secret"
(passphrase/key) managed using the virSecret* API.
Only the qcow/qcow2 encryption format, and a "default" format used to
let libvirt choose the format during volume creation, is currently
supported.
This patch does not add any users; the <encryption> tag is added in
the following patches to both volumes (to support encrypted volume
creation) and domains.
* docs/*.html: Re-generate
* docs/formatstorageencryption.html.in, docs/sitemap.html.in:
Add page describing storage encryption data format
* docs/schemas/Makefile.am, docs/schemas/storageencryption.rng:
Add RNG schema for storage encryption format
* po/POTFILES.in: Add src/storage_encryption_conf.c
* src/libvirt_private.syms: Export virStorageEncryption* functions
* src/storage_encryption_conf.h, src/storage_encryption_conf.c: Internal
helper APIs for dealing with storage encryption format
* libvirt.spec.in, mingw32-libvirt.spec.in: Add storageencryption.rng
RNG schema
* include/libvirt/virterror.h, src/virterror.c: Add VIR_WAR_NO_SECRET
* src/libvirt_private.syms, src/datatypes.h, src/datatypes.c: Type
virSecret struct definition and helper APIs
* src/driver.h: Sub-driver API definitions for secrets
* src/libvirt.c: Define new sub-driver for secrets
This patch adds a "secret" as a separately managed object, using a
special-purpose API to transfer the secret values between nodes and
libvirt users.
* docs/schemas/secret.rng, docs/schemas/Makefilem.am: Add new
schema for virSecret objects
* docs/*html: Re-generated
* docs/formatsecret.html.in, docs/sitemap.html.in: Add page
describing the virSecret XML schema
* include/libvirt/libvirt.h.in: Define the new virSecret public
API
* src/libvirt_public.syms: Export symbols for new public APIs
* mingw32-libvirt.spec.in, libvirt.spec.in: Add secret.rng to
files list
Per prior discussion -- this was, indeed, trivial.
I'm a little disappointed to be breaking the ordering characteristics of
the enum (as it had been ordered by increasing time requirements and
decreasing output size), but breaking any save files with the old
constants in the headers would of course be worse.
>From 2a9cdcfc88de091a8d34aa3fc3b1208d7681790e Mon Sep 17 00:00:00 2001
From: Charles Duffy <Charles_Duffy@dell.com>
Date: Fri, 28 Aug 2009 11:49:54 -0500
Subject: [PATCH] support lzop save compression for qemu
One of the larger disincentives towards use of compression for migrated-out save
files is performance impact. This patch adds support for lzop; CPU time for
compression is about 5x faster than gzip (the next most performant algorithm)
and decompression is about 3x faster.
Signed-off-by: Charles Duffy <Charles_Duffy@dell.com>
Signed-off-by: Chris Lalancette <clalance@redhat.com>
All of the other drivers that support the getMaxVcpus callback
also accept a NULL value for type. Make openvz also accept a
NULL value.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
qemudExtractMonitorPath() was doing a VIR_ALLOC_N followed by a
strncpy. However, this isn't necessary; we can do the same thing
using strndup, which is much safer.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The documentation for virNodeGetCellsFreeMemory claims the values
returned are in kilobytes, but that's actually wrong; the value
returned is actually in bytes. Fix up the documentation to be
correct.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
S-expression containing empty lists, e.g. (cpus (() () () ())),
was not being handled properly in sexpr2string() serialization.
Emit an empty list when encountering NIL sexpr kind.
* src/remote_internal.c: Split remoteAuthPolkit into separate
impls for v0 and v1 to avoid compile warnings due to unused
variables/params
* qemud/remote.c: Remove accidental tabs
* configure.in: Check for pkcheck which indicates new policykit
* qemud/Makefile.am: Install different versions of policy
* qemud/libvirtd.policy: Rename to libvirtd.policy-0
* qemud/libvirtd.policy-1: new style policy
* qemud/qemud.c, qemud/qemud.h, qemud/remote.c: Support new
policykit API via external pkcheck helper
* src/remote_internal.c: Don't prompt for polkit auth with new
policykit API
* libvirt.spec.in: deal with new policy install locations & deps
Matthias correctly points out that escape_specialcharaters() takes a
length, and since we are now malloc()'ing string in phypOpen instead of
making it a static array, we can't use sizeof(string) anymore. Calculate
the proper strlen and then use that both to allocate the string and also
pass it to escape_specialcharacters().
Signed-off-by: Chris Lalancette <clalance@redhat.com>
I came across this line in the phypOpen function:
char string[strlen(conn->uri->path)];
Here the path part of the given URI is used without checking it for
NULL, this can cause a segfault as strlen expects a string != NULL.
Beside that uuid_db and connection_data leak in case of an error.
In this line
conn->uri->path = string;
the original path of the URI leaks. The patch adds a VIR_FREE call
before setting the new path.
The attached patch is compile-tested but I don't have a Power
Hypervisor installation at hand to test it for real.
Matthias
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Fix up a small memory leak pointed out by DanB; I was forgetting
to release memory allocated to driver->saveImageFormat.
Also add the "save_image_format" and "security" entries to
the augeas lens.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Test case for the fix applied in
commit 14435163a0
Author: Daniel Veillard <veillard@redhat.com>
Date: Fri Jun 26 18:14:16 2009 +0000
* tests/sexpr2xmldata/sexpr2xml-pv-vfb-type-crash.sexpr,
tests/sexpr2xmldata/sexpr2xml-pv-vfb-type-crash.xml: Data
files exhibiting the crash
* tests/sexpr2xmltest.c: Process new data files
https://bugzilla.redhat.com/517371
Matt Booth points out that if you use a non-existent bridge name when
start a guest you get a weird error message:
Failed to add tap interface 'vnet%d' to bridge 'virbr0'
and dev='vnet%d' appears in the dumpxml output.
Fix that by not including 'vnet%d' in the error message and freeing the
'vnet%d' string if adding the tap device to the bridge fails.
* src/qemu_conf.c, src/uml_conf.c: fix qemudNetworkIfaceConnect()
and umlConnectTapDevice() to not expose 'vnet%d' to the user
As we start/shutdown guests, or hotplug/hot-unplug devices, we can add
or delete devices as appropriate from a list of active devices.
Then, in pciReset(), we can use this to determine whether its safe to
reset a device as a side effect of resetting another device.
* src/qemu_conf.h: add activePciHostdevs to qemud_driver
* src/qemu_driver.c: maintain the activePciHostdevs list, and pass it
to pciResetDevice()
* src/pci.[ch]: pass the activeDevs list to pciResetDevice() and use
it to determine whether a Secondary Bus Reset is safe
The qemuPrepareHostDevices() and qemuDomainReAttachHostDevices()
functions are clutter with a bunch of calls to pciGetDevice() and
pciFreeDevice() obscuring the basic logic.
Add a pciDeviceList type and add a qemuGetPciHostDeviceList() function
to build a list from a domain definition. Use this in prepare/re-attach
fto simplify things and eliminate the multiple pciGetDevice calls.
This is especially useful because in the next patch we need to iterate
the hostdevs list a third time and we also need a list type for keeping
track of active devices.
* src/pci.[ch]: add pciDeviceList type and also a per-device 'managed'
property
* src/libvirt_private.syms: export the new functions
* src/qemu_driver.c: add qemuGetPciHostDeviceList() and re-write
qemuPrepareHostDevices() and qemuDomainReAttachHostDevices() to use it
Newer versions of QEMU accept 'pci_add auto', but older versions require
'pci_add pci_addr=auto'
* src/qemu_driver.c: use pci_addr= in qemudDomainAttachHostPciDevice()
for older versions of QEMU
When we hot-unplug a PCI host device from a guest, we should reset it.
Both managed and unmanaged devices should be reset, but only managed
devices should be re-attached.
* src/qemu_driver.c: reset devices in qemudDomainDetachHostPciDevice()
Right now we're only resetting managed devices before hotplug, but we
should reset them irrespective of whether they are managed.
* src/qemu_driver.c: reset all PCI hostdevs before hotplug
It turns out that the previous attempt at this doesn't work well
in the case of hotplug. We need qemuCheckPciHostDevice() to
disallow the reset affecting devices already attach to the guest,
but we still need to avoid double locking the virDomainObjPtr.
This is all getting messy, I've a better idea.
This reverts commit 6318808270 and
c106c8a18c.
* src/qemu_driver.c, src/pci.[ch], src/xen_unified.c,
src/libvirt_private.syms: revert a bunch of stuff.
The current code makes a poor effort at updating the device arrays after
hot-unplug. Fix that and combine the two code paths into one.
* src/qemu_driver.c: fix list updating in qemudDomainDetachNetDevice(),
qemudDomainDetachPciDiskDevice() and qemudDomainDetachHostPciDevice()
