There is no need to have two different enums where one has the same
values as the other one with some additions.
Currently for on_poweroff and on_reboot we allow only subset of actions
that are allowed for on_crash. This was covered in parse time using
two different enums. Now to make sure that we don't allow setting
actions that are not supported we need to check it while validating
domain config.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Even though hal doesn't make use of it, the privileged flag is related
to the daemon/driver rather than the backend actually used.
While at it, get rid of some tab indentation in the driver state struct.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
So we have a syntax-check rule to catch all tab indents but it naturally
can't catch tab spacing, i.e. as a delimiter. This patch is a result of
running 'vim -en +retab +wq'
(using tabstop=8 softtabstop=4 shiftwidth=4 expandtab) on each file from
a list generated by the following:
find . -regextype gnu-awk \
-regex ".*\.(rng|syms|html|s?[ch]|py|pl|php(\.code)?)(\.in)?" \
| xargs git grep -lP "\t"
Signed-off-by: Erik Skultety <eskultet@redhat.com>
If same boot order is specified twice (or more) in domain xml
we call free for uninitiaziled loadparm on cleanup in virDomainDeviceBootParseXML
and SIGABRT (or similar) as a result.
Express a properly terminated backing chain by putting a
virStorageSource of type VIR_STORAGE_TYPE_NONE in the chain. The newly
used helpers simplify this greatly.
The change fixes a bug as formatting an incomplete backing chain and
parsing it back would end up in expressing a terminated chain since
src->backingStoreRaw was not populated. By relying on the terminator
object this can be now processed appropriately.
Add helpers that will simplify checking if a backing file is valid or
whether it has backing store. The helper virStorageSourceIsBacking
returns true if the given virStorageSource is a valid backing store
member. virStorageSourceHasBacking returns true if the virStorageSource
has a backing store child.
Adding these functions creates a central points for further refactors.
Storage driver uses virStorageSource only partially to store it's
configuration but fully when parsing backing files of storage volumes.
This patch sets the 'type' field to a value other than
VIR_STORAGE_TYPE_NONE so that further patches can add a terminator
element to backing chains without breaking iteration.
The backing store indexes were not bound to the storage sources in any
way. To allow us to bind a given alias to a given storage source we need
to save the index in virStorageSource. The backing store ids are now
generated when detecting the backing chain.
Since we don't re-detect the backing chain after snapshots, the
numbering needs to be fixed there.
This internal API can be used to find a specific CPU model in
virDomainCapsCPUModels list.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When a hypervisor marks a CPU model as unusable on the current host, it
may also give us a list of features which prevent the model from being
usable. Storing this list in virDomainCapsCPUModel will help the CPU
driver with creating a host-model CPU configuration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Currently, if parsing of device info fails info->alias is freed.
It doesn't make much sense to leave the rest of the struct
behind.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's one 'return' in the middle of the function body. It's
very easy to miss and so it makes adding new code harder. Also
the function doesn't follow our style 100%.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Every caller reports the error themselves. Might as well move it
into the function and thus unify it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let's use the RWObjectLockable for the various list lock mgmt.
Only time need Write lock will be for Add/Remove logic.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rename virDomainNumaDefCPUFormat to virDomainNumaDefCPUFormatXML,
matching its peer virDomainNumaDefCPUParseXML and the general
vir*{Format,Parse}XML conventions.
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Modify virStoragePoolObjGetAutostartLink and
virStoragePoolObjGetConfigFile to return "const char *"
since that's how both are used and to ensure no one
tries to VIR_FREE the result.
https://bugzilla.redhat.com/show_bug.cgi?id=1497410
The comment in virNetDevTapInterfaceStats() implementation for
Linux states that packets transmitted by domain are received by
the host and vice versa. Well, this is true but not for all types
of interfaces. For instance, for macvtaps when TAP device is
hooked right onto a physical device any packet that domain sends
looks also like a packet sent to the host. Therefore, we should
allow caller to chose if the stats returned should be straight
copy or swapped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Small wrapper to lookup interface in domain definition by its
name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemu 2.7.0 introduces multiqueue virtio-blk(commit 2f27059).
This patch introduces a new attribute "queues". An example of
the XML:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' queues='4'/>
The corresponding QEMU command line:
-device virtio-blk-pci,scsi=off,num-queues=4,id=virtio-disk0
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When detaching an <interface/> from a domain, the MAC address is
parsed and if not present one is generated. If no corresponding
interface is found in the domain, the following error is
reported:
error: operation failed: no device matching mac address 52:54:00:75:32:5b found
where the MAC address is the auto generated one. This might be
very confusing. Solution to this is to ignore auto generated MAC
address when looking up the device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
virDomainDiskSourceParse got to the point of being an ugly spaghetti
mess by adding more and more stuff into it. Split out parsing of network
disk information into a separate function so that it stays contained.
On pure success paths, virNWFilterIPAddrMapAddIPAddr was validly
consuming the input @addr; however, on failure paths it was possible
that virNWFilterVarValueCreateSimple succeed, but virNWFilterHashTablePut
failed resulting in virNWFilterVarValueFree being called to clean
up @val which also cleaned up the input @addr. Thus the caller had
no way to determine on failure whether it too should clean up the
passed parameter.
Instead, let's create a copy of the input @addr, then handle that
properly in the API allowing/forcing the caller to free it's own
copy of the input parameter.
Add an optional virTristateBool haveTLS to virStorageSource to
manage whether a storage source will be using TLS.
Sample XML for a VxHS disk:
<disk type='network' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source protocol='vxhs' name='eb90327c-8302-4725-9e1b-4e85ed4dc251' tls='yes'>
<host name='192.168.0.1' port='9999'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
Additionally add a tlsFromConfig boolean to control whether the TLS
setting was due to domain configuration or qemu.conf global setting
in order to decide whether to Format the haveTLS setting for either
a live or saved domain configuration file.
Update the qemuxml2xmltest in order to add a test to show the proper
parsing.
Also update the docs to describe the tls attribute.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
The virNWFilterIPAddrMapAddIPAddr code can consume the @addr parameter
on success when the @ifname is found in the ipAddressMap->hashTable
hash table in the call to virNWFilterVarValueAddValue; however, if
not found in the hash table, then @addr is formatted into a @val
which is stored in the table and on return the caller would be
expected to free @addr.
Thus, the caller has no way to determine on success whether @addr was
consumed, so in order to fix this create a @tmp variable which will
be stored/consumed when virNWFilterVarValueAddValue succeeds. That way
the caller can free @addr whether the function returns success or failure.
This reverts commit edaf4ebe95.
This uses "reconnect" as attribute for <source> element, but we already
have a <reconnect> element for <source> element for chardev devices.
Since this is the same feature for different device it should be
presented in XML the same way.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
It is possible (although possibly not very useful) to leave out
the service attribute when using <source mode='bind'/>
Fix the formatter bug introduced by commit 4a0da34 and format
the host when its present (checked for non-NULL inside
virBufferEscapeString) instead of basing it on the presence
of the service attribute.
https://bugzilla.redhat.com/show_bug.cgi?id=1455825
In the past we updated host-model CPUs with host CPU data by adding a
model and features, but keeping the host-model mode. And since the CPU
model is not normally formatted for host-model CPU defs, we had to pass
the updateCPU flag to the formatting code to be able to properly output
updated host-model CPUs. Libvirt doesn't do this anymore, host-model
CPUs are turned into custom mode CPUs once updated with host CPU data
and thus there's no reason for keeping the hacks inside CPU XML
formatters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For vhost-user ports, Open vSwitch acts as the server and QEMU the client.
When OVS crashed or restart, QEMU shoule be reconnect to OVS.
Signed-off-by: ZhiPeng Lu <lu.zhipeng@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduce virStoragePoolObjForEachVolume to scan each volume
calling the passed callback function until all volumes have been
processed in the storage pool volume list, unless the callback
function returns an error.
Introduce virStoragePoolObjSearchVolume to search each volume
calling the passed callback function until it returns true
indicating that the desired volume was found.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Create/use virStoragePoolObjAddVol in order to add volumes onto list.
Create/use virStoragePoolObjRemoveVol in order to remove volumes from list.
Create/use virStoragePoolObjGetVolumesCount to get count of volumes on list.
For the storage driver, the logic alters when the volumes.obj list grows
to after we've fetched the volobj. This is an optimization of sorts, but
also doesn't "needlessly" grow the volumes.objs list and then just decr
the count if the virGetStorageVol fails.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Create/use a helper to perform object allocation.
Adjust storagevolxml2argvtest.c in order to use the allocator and
setting of the obj->def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation for making a private object, create accessor API's for
consumer storage functions to use:
virStoragePoolObjGetDef
virStoragePoolObjSetDef
virStoragePoolObjGetNewDef
virStoragePoolObjDefUseNewDef
virStoragePoolObjGetConfigFile
virStoragePoolObjSetConfigFile
virStoragePoolObjGetAutostartLink
virStoragePoolObjIsActive
virStoragePoolObjSetActive
virStoragePoolObjIsAutostart
virStoragePoolObjSetAutostart
virStoragePoolObjGetAsyncjobs
virStoragePoolObjIncrAsyncjobs
virStoragePoolObjDecrAsyncjobs
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id 'e02ff020cac' neglected to use the attrBuf and childBuf
in the virDomainDiskSourceFormatNetwork call.
So make the necessary alterations to allow usage.
Rather than checking during XML processing, move the check for
valid <encryption> into virDomainDiskDefParseValidate and alter
the text of the message slightly to be a bit more correct.
