This function calls qemuDomainAttachControllerDevice for SCSI
controllers and reports an error for all other controllers.
Move the error inside qemuDomainAttachControllerDevice and delete this
wrapper.
A closer review of the code shows that for the transition from paused to
running which was supposed to emit the VIR_DOMAIN_EVENT_RESUMED - no event
would be generated. Rather the event is generated when going from running
to running.
Following the 'was_running' boolean shows it is set when the domain obj
is active and the domain obj state is VIR_DOMAIN_RUNNING. So rather than
using was_running to generate the RESUMED event, use !was_running
When the function changes the memory lock limit for the first time,
it will retrieve the current value and store it inside the
virDomainObj for the domain.
When the function is called again, if memory locking is no longer
needed, it will be able to restore the memory locking limit to its
original value.
We increase the limit before plugging in a PCI hostdev or a memory
module because some memory might need to be locked due to eg. VFIO.
Of course we should do the opposite after unplugging a device: this
was already the case for memory modules, but not for PCI hostdevs.
In commit 686eb7a24f, the break was not considered part of the
condition, hence breaking after first node when searching.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
when appropriate, of course. If the config for a domain specifies boot
order with <boot dev='blah'/> elements, e.g.:
<os>
...
<boot dev='hd'/>
<boot dev='network'/>
</os>
Then the first disk device in the config will have ",bootindex=1"
appended to its qemu commandline -device options, and the first (and
*only* the first) network interface device will get ",bootindex=2".
However, if the first network interface device is a "hostdev" device
(an SRIOV Virtual Function (VF) being assigned to the domain with
vfio), then the bootindex option will *not* be appended. This happens
because the bootindex=n option corresponding to the order of "<boot
dev='network'/>" is added to the -device for the first network device
when network device commandline args are constructed, but if it's a
hostdev network device, its commandline arg is instead constructed in
the loop for hostdevs.
This patch fixes that omission by noticing (in bootHostdevNet) if the
first network device was a hostdev, and if so passing on the proper
bootindex to the commandline generator for hostdev devices - the
result is that ",bootindex=2" will be properly appended to the first
"network" device in the config even if it is really a hostdev
(including if it is assigned from a libvirt network pool). (note that
this is only the case if there is no <bootmenu enabled='yes'/> element
in the config ("-boot menu-on" in qemu) , since the two are mutually
exclusive - when the bootmenu is enabled, the individual per-device
bootindex options can't be used by qemu, and we revert to using "-boot
order=xyz" instead).
If a greater level of control over boot order is desired (e.g., more
than one network device should be tried, or a network device other
than the first one encountered in the config), then <boot
dev='network'/> in the <os> element should not be used; instead, the
individual device elements in the config should be given a "<boot
order='n'/>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1278421
Commit 256496e1 introduced a detection if "is locked" in error replay
from qemu monitor. Commit c4073657 fixed a memory leak, but it was
pointed out by Peter, that this could be done cleaner without
stringifing the replay.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The return value of virJSONValueToString() should be freed when
no longer needed. This is not the case after 256496e1.
==26902== 138 bytes in 2 blocks are definitely lost in loss record 1,051 of 1,239
==26902== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==26902== by 0xAA5F599: strdup (in /lib64/libc-2.21.so)
==26902== by 0x552BAD9: virStrdup (virstring.c:726)
==26902== by 0x54F60A7: virJSONValueToString (virjson.c:1790)
==26902== by 0x1DF6EBB9: qemuMonitorJSONEjectMedia (qemu_monitor_json.c:2225)
==26902== by 0x1DF57A4C: qemuMonitorEjectMedia (qemu_monitor.c:1985)
==26902== by 0x1DF1EF2D: qemuDomainChangeEjectableMedia (qemu_hotplug.c:199)
==26902== by 0x1DF90314: qemuDomainChangeDiskLive (qemu_driver.c:7985)
==26902== by 0x1DF90476: qemuDomainUpdateDeviceLive (qemu_driver.c:8030)
==26902== by 0x1DF91ED7: qemuDomainUpdateDeviceFlags (qemu_driver.c:8677)
==26902== by 0x561785F: virDomainUpdateDeviceFlags (libvirt-domain.c:8559)
==26902== by 0x134210: remoteDispatchDomainUpdateDeviceFlags (remote_dispatch.h:10966)
==26902== 106 bytes in 1 blocks are definitely lost in loss record 1,033 of 1,239
==26902== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==26902== by 0xAA5F599: strdup (in /lib64/libc-2.21.so)
==26902== by 0x552BAD9: virStrdup (virstring.c:726)
==26902== by 0x54F60A7: virJSONValueToString (virjson.c:1790)
==26902== by 0x1DF6EC0C: qemuMonitorJSONEjectMedia (qemu_monitor_json.c:2227)
==26902== by 0x1DF57A4C: qemuMonitorEjectMedia (qemu_monitor.c:1985)
==26902== by 0x1DF1EF2D: qemuDomainChangeEjectableMedia (qemu_hotplug.c:199)
==26902== by 0x1DF90314: qemuDomainChangeDiskLive (qemu_driver.c:7985)
==26902== by 0x1DF90476: qemuDomainUpdateDeviceLive (qemu_driver.c:8030)
==26902== by 0x1DF91ED7: qemuDomainUpdateDeviceFlags (qemu_driver.c:8677)
==26902== by 0x561785F: virDomainUpdateDeviceFlags (libvirt-domain.c:8559)
==26902== by 0x134210: remoteDispatchDomainUpdateDeviceFlags (remote_dispatch.h:10966)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Moving tasks to cgroups implied sched_setaffinity. Changing the cpus in
a set implies the same for all tasks in the group.
The old code put the the thread into the cpuset inherited from the
machine cgroup, which allowed it to run outside of vcpupin for a short
while.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
The machine cgroup is a superset, a parent to the emulator and vcpuX
cgroups. The parent cgroup should never have any tasks directly in it.
In fact the parent cpuset might contain way more cpus than the sum of
emulatorpin and vcpupins. So putting tasks in the superset will allow
them to run outside of <cputune>.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
virCgroupNewMachine used to add the pidleader to the newly created
machine cgroup. Do not do this implicit anymore.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
When user configures vhost-user interface and forgets to also configure
any shared memory, the search for the root cause of non-operational
interface might take unpleasantly long time. Let's enhance user
experience by emitting a warning in the logs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1266982
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1240439
Ta-da! Now that we know how to open a macvtap device multiple
times, we can finally enable the multiqueue feature. Everything
else is already prepared (e.g. command line generation) from the
previous iteration where the feature was implemented for
TUN/TAP devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For the multiqueue on macvtaps we are going to need to open
the device multiple times. Currently, this is not supported.
Rework the function, so that upper layers can be reworked too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So yet again one of integer arguments that we use as a boolean.
Since the argument count of the function is unbearably long
enough, lets turn those booleans into flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add qemuDomainHasVCpuPids to do the checking and replace in place checks
with it.
We no longer need checking whether the thread contains fake data
(vcpupids[0] == vm->pid) as in b07f3d821d
and 65686e5a81 this was removed.
The vCPU threads make sense in the counterparts that set the vCPU
bandwidth/quota, not in the emulator one. The emulator tunables are set
all the time anyways.
Drop the extra check and remove the now unneeded vm argument.
Since commit 0c04906fa the check for priv->cgroup doesn't make sense as
the calls to virCgroupHasController return the same information. Remove
it and move it's comment partially to the new check.
The already spurious check was also later copied to the iothreads code.
Refactor the code flow so that 'exit_monitor:' can be removed.
This patch moves the auditing functions into places where it's certain
that hotunplug was or was not successful and reports errors from
qemuMonitorGetCPUInfo properly.
Refactor the code flow so that 'exit_monitor:' can be removed.
This patch also moves the auditing and setting of the new vCPU count
right to the place where the hotplug happens, since it's possible that
the hotplug succeeds and adds a cpu while other stuff fails.
Lastly, failures of qemuMonitorGetCPUInfo are now reported rather than
ignored. The function retuns 0 if it "successfully" detected 0 threads.
qemuDomainHotplugVcpus/qemuDomainHotunplugVcpus are complex enough in
regards of adding one CPU. Additionally it will be desired to reuse
those functions later with specific vCPU hotplug.
Move the loops for adding vCPUs into qemuDomainSetVcpusFlags so that the
helpers can be made simpler and more straightforward.
The cpu hotplug helper functions used negative error handling in a part
of them, although some code that was added later didn't properly set the
error codes in some cases. This would cause improper error messages in
cases where we couldn't modify the numa cpu mask and a few other cases.
Fix the logic by converting it to the regularly used pattern.
With a very unfortunate timing, the agent might vanish before we do the
second call while the locks were down. Re-check that the agent is
available before attempting it again.
The current virtlogd RPC protocol provides the ability to
handle log files associated with QEMU stdout/err. The log
protocol messages take the virt driver, domain name and
use that to form a log file path. This is quite restrictive
as it prevents us re-using the same RPC protocol messages
for logging to char device backends where the filename
can be arbitrarily user specified. It is also bad because
it means we have 2 separate locations which have to decide
on logfile name.
This change alters the RPC protocol so that we pass the
desired log file path along when opening the log file
initially. Now the virt driver is exclusively in charge
of deciding the log filename
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When a SCSI disk is hotplugged to a domain that does not have the required
SCSI controller already defined and loaded the following internal error occurs
error: Failed to attach device from scsi_disk.xml
error: internal error: Could not find scsi controller with index 0 required for device
Commit 0260506c added in method qemuBuildDriveDevStr a lookup of the controller
alias. The internal error occurs because in method qemuDomainAttachSCSIDisk
the automatic creation of the potentially missing SCSI controller occurs after
calling qemuBuildDriveDevStr.
This patch reverses the calling sequence.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Often when debugging bug reports one is given a copy of the file
from /var/log/libvirt/qemu/$NAME.log along with other supporting
files. In a number of cases I've been given sets of files which
were from different machines. Including the hostname in the QEMU
log file will help identify when the bug reporter is providing
bad information.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since libvirt for dubious historical reasons stores memory size as
kibibytes, it's possible that the alignments done in the qemu code
overflow the the maximum representable size in bytes. The XML parser
code handles them in bytes in some stages. Prevent this by doing
overflow checks when alinging the size and add a test case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260576
If VM A is shutdown a by qemu agent at appoximately the same time
an agent EOF of VM A happened, there's a chance that deadlock may occur:
qemuProcessHandleAgentEOF in main thread
A) priv->agent = NULL; //A happened before B
//deadlock when we get agent lock which's held by worker thread
qemuAgentClose(agent);
qemuDomainObjExitAgent called by qemuDomainShutdownFlags in worker thread
B) hasRefs = virObjectUnref(priv->agent); // priv->agent is NULL,
// return false
if (hasRefs)
virObjectUnlock(priv->agent); //agent lock will not be released here
In order to resolve, during EOF close the agent first, then set priv->agent
to NULL to fix the deadlock.
This essentially reverts commit id '1020a504'. It's also of note that commit
id '362d0477' notes a possible/rare deadlock similar to what was seen in
the monitor in commit id '25f582e3'. However, it seems interceding changes
including commit id 'd960d06f' should remove the deadlock issue.
With this change, if EOF is called:
Get VM lock
Check if !priv->agent || priv->beingDestroyed, then unlock VM
Call qemuAgentClose
Unlock VM
When qemuAgentClose is called
Get Agent lock
If Agent->fd open, close it
Unlock Agent
Unref Agent
qemuDomainObjEnterAgent
Enter with VM lock
Get Agent lock
Increase Agent refcnt
Unlock VM
After running agent command, calling qemuDomainObjExitAgent
Enter with Agent lock
Unref Agent
If not last reference, unlock Agent
Get VM lock
If we were in the middle of an EnterAgent, call Agent command, and
ExitAgent sequence and the EOF code is triggered, then the EOF code
can get the VM lock, make it's checks against !priv->agent ||
priv->beingDestroyed, and call qemuAgentClose. The CloseAgent
would wait to get agent lock. The other thread then will eventually
call ExitAgent, release the Agent lock and unref the Agent. Once
ExitAgent releases the Agent lock, AgentClose will get the Agent
Agent lock, close the fd, unlock the agent, and unref the agent.
The final unref would cause deletion of the agent.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Reviewed-by: Ren Guannan <renguannan@huawei.com>
Add capabilities for virtio-keyboard, virtio-mouse
and virtio-tablet devices:
name "virtio-keyboard-device", bus virtio-bus
name "virtio-keyboard-pci", bus PCI
name "virtio-mouse-device", bus virtio-bus
name "virtio-mouse-pci", bus PCI
name "virtio-tablet-device", bus virtio-bus
name "virtio-tablet-pci", bus PCI
Map both -device and -pci versions of the device to one capability.
https://bugzilla.redhat.com/show_bug.cgi?id=1231114
Check if virtio-gpu provides virgl option, and add qemu command line
formatter.
It is enabled with the existing accel3d attribute:
<model type='virtio' heads='1'>
<acceleration accel3d='yes'/>
</model>
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemu 2.5 provides virtio video device. It can be used with -device
virtio-vga for primary devices, or -device virtio-gpu for non-vga
devices. However, only the primary device (VGA) is supported with this
patch.
Reference:
https://bugzilla.redhat.com/show_bug.cgi?id=1195176
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently the QEMU stdout/stderr streams are written directly to
a regular file (eg /var/log/libvirt/qemu/$GUEST.log). While those
can be rotated by logrotate (using copytruncate option) this is
not very efficient. It also leaves open a window of opportunity
for a compromised/broken QEMU to DOS the host filesystem by
writing lots of text to stdout/stderr.
This makes it possible to connect the stdout/stderr file handles
to a pipe that is provided by virtlogd. The virtlogd daemon will
read from this pipe and write data to the log file, performing
file rotation whenever a pre-determined size limit is reached.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the QEMU monitor is given an FD to the logfile. This
won't work in the future with virtlogd, so it needs to use the
qemuDomainLogContextPtr instead, but it shouldn't directly
access that object either. So define a callback that the
monitor can use for reporting errors from the log file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When the qemuProcessAttach/Stop methods write a marker into
the log file, they can use qemuDomainLogContextWrite to
write a formatted message.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of writing directly to a log file descriptor, change
qemuLogOperation to use qemuDomainLogContextWrite().
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemuDomainTaint APIs currently expect to be passed a log file
descriptor. Change them to instead use a qemuDomainLogContextPtr
to hide the implementation details.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the places which create/open log files to use the new
qemuDomainLogContextPtr object instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a qemuDomainLogContext object to encapsulate
handling of I/O to/from the domain log file. This will
hide details of the log file implementation from the
rest of the driver, making it easier to introduce
support for virtlogd later.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are two pretty similar functions qemuProcessReadLog and
qemuProcessReadChildErrors. Both read from the QEMU log file
and try to strip out libvirt messages. The latter then reports
an error, while the former lets the callers report an error.
Re-write qemuProcessReadLog so that it uses a single read
into a dynamically allocated buffer. Then introduce a new
qemuProcessReportLogError that calls qemuProcessReadLog
and reports an error.
Convert all callers to use qemuProcessReportLogError.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The rename operation only works on inactive virtual machines,
but it none the less writes to the log file used by the QEMU
processes. This log file is not intended to provide a general
purpose audit trail of operations performed on VMs. The audit
subsystem has recording of important operations. If we want
to extend that to cover all significant public APIs that is
a valid thing to consider, but we shouldn't arbitrarily log
specific APIs into the QEMU log file in the meantime.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Using qemuProcess{Init,Launch,FinishStartup} allows us to run
pre-migration commands on destination before asking QEMU to wait for
incoming migration data.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
NBD storage migration will not work with offline migration anyway and we
already checked that the user did not ask for it. Thus it doesn't make
sense to keep the code after 'done' label where we jump in case of
offline migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Some failure paths in qemuMigrationPrepareAny forgot to kill the just
started QEMU process. This patch fixes this by combining 'stop' and
'endjob' label into a new label 'stopjob'. This name was chosen to avoid
confusion with the most common semantics of 'endjob'. Normally, 'endjob'
is always called at the end of an API to stop the job we entered at the
beginning. In qemuMigrationPrepareAny we only want to stop the job in
failure path; on success we need to carry the job over to the Finish
phase.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Once qemuProcessInit was called, qemuProcessLaunch will launch a new
QEMU process with stopped virtual CPUs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart is going to be split in three parts: qemuProcessInit,
qemuProcessLaunch, and qemuProcessFinish so that migration Prepare phase
can insert additional code in the process. qemuProcessStart will be a
small wrapper for all other callers.
qemuProcessInit prepares the domain up to the point when priv->qemuCaps
is initialized.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
'model' attribute was added to a panic device but only one panic
device is allowed. This patch changes panic device presence
from 'optional' to 'zeroOrMore'.
Panic device type used depends on 'model' attribute.
If no model is specified then device type depends on hypervisor
and guest arch. 'pseries' model is used for pSeries guest and
'isa' model is used in other cases.
XML:
<devices>
<panic model='hyperv'/>
</devices>
QEMU command line:
qemu -cpu <cpu_model>,hv_crash
Now that new domains are started inside a QEMU_ASYNC_JOB_START job,
we need to pass it down to qemuProcessStartCPUs too.
This removes the warning:
qemuDomainObjEnterMonitorInternal:1750 : This thread seems to be the
async job owner; entering monitor without asking for a nested job is
dangerous
Introduced by commit 04c721f, before that this code path was only
executed with QEMU_ASYNC_JOB_NONE.
(This code is not executed on migration, because qemuMigrationPrepareAny
sets the VIR_QEMU_PROCESS_START_PAUSED flag.)
The domain definition is not needed in any of these functions.
Only pass it to qemuSetupChardevCgroup, which is used as a callback
for virDomainChrDefForeach.
Use the right type for passing virDomainObjPtr instead of
void* where possible.
The amount of memory a ppc64 domain might need to lock is different
than that of a equally-sized x86 domain, so we need to check the
domain's architecture and act accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1273480
The function is used everywhere else to check whether the locked
memory limit should be set / updated, and it should be used here
as well.
Moreover, qemuDomainGetMlockLimitBytes() expects the hostdev to
have already been added to the domain definition, but we only do
that at the end of qemuDomainAttachHostPCIDevice(). Work around
the issue by adding the hostdev before adjusting the locked memory
limit and removing it immediately afterwards.
Remembering to call qemuMonitorSetDomainLog in the right paths before
calling qemuProcessStop is annoying and easy to forget. And I already
forgot to do so in commit v1.2.8-52-g0389060: logfd may be leaked if
QEMU process dies between Prepare and Finish migration phases.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart is so big that any nontrivial code should be moved to
dedicated functions to make the code easier to read and maintain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart is so big that any nontrivial code should be moved to
dedicated functions to make the code easier to read and maintain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart is so big that any nontrivial code should be moved to
dedicated functions to make the code easier to read and maintain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart is so big that any nontrivial code should be moved to
dedicated functions to make the code easier to read and maintain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Traditionally, we pass incoming migration URI on QEMU command line,
which has some drawbacks. Depending on the URI QEMU may initialize its
migration state immediately without giving us a chance to set any
additional migration parameters (this applies mainly for fd: URIs). For
some URIs the monitor may be completely blocked from the beginning until
migration is finished, which means we may be stuck in qmp_capabilities
command without being able to send any QMP commands.
QEMU solved this by introducing "defer" parameter for -incoming command
line option. This will tell QEMU to prepare for an incoming migration
while the actual incoming URI is sent using migrate-incoming QMP
command. Before calling this command we can normally talk to the
monitor and even set any migration parameters which will be honored by
the incoming migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We only started an async job for incoming migration from another host.
When we were starting a domain from scratch or restoring from a saved
state (migration from file) we didn't set any async job. Let's introduce
a new QEMU_ASYNC_JOB_START for these cases.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Incoming migration may require quite a few parameters (URI, fd, path) to
be considered while starting QEMU and we will soon add another one.
Let's group all of them in a single struct.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Make callers of qemuBuildCommandLine responsible for providing the URI
which should be passed as a parameter for -incoming.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Adjust the config code so that it does not enforce that target memory
node is specified. To avoid breakage, adjust the qemu memory hotplug
config checker to disallow such config for now.
Since we already make sure before that the domain configuration is
valid we may execute it always at the cost of doing 0 iterations of the
for loop.
This patch will simplify later refactor as it will avoid whitespace
changes.
Make the function usable so that -1 can be passed to it as cell ID so
that we can later enable memory hotplug on non-NUMA guests for certain
architectures.
Logging current async job while in BeginJob is useful, but the async job
we want to start is even more interesting.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The previous commit
commit 4e8993a250
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Nov 9 16:20:08 2015 +0000
qemu: assume various QEMU 0.10 features are always available
Added broken handling of -sdl. Instead of duplicating existing
SDL handling code, just ensure it is invoked in the right
scenarios.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The -sdl and -net ...name=XXX arguments were both introduced
in QEMU 0.10, so the QEMU driver can assume they are always
available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0 the -vga argument was introduced, so the
QEMU driver can assume it is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0 the -drive format= parameter was added,
so the QEMU driver can assume it is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0, the -drive cache option stopped using
the on/off value names, so the QEMU driver can assume
use of the new value names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we require QEMU 0.12.0, we can assume that QEMU supports
all of the fd, tcp, unix and exec migration protocols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We have twice previously attempted to remove Xenner
support
commit de9be0ab4d
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Aug 22 17:29:01 2012 +0100
Remove xenner support
commit 92572c3d71
Author: Ján Tomko <jtomko@redhat.com>
Date: Wed Feb 18 16:33:50 2015 +0100
Remove code handling the QEMU_CAPS_DOMID capability
This change really does remove the last traces of it
in the capabilities handling code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.9.1 the -drive argument can be used to configure
all disks, so the QEMU driver can assume it is always available
and drop support for -hda/-cdrom/etc.
Many of the tests need updating because a great many were
running without CAPS_DRIVE set, so using the -hda legacy
syntax.
Fixing the tests uncovered a bug in the argv -> xml
convertor which failed to handle disk with if=floppy.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QEMU argv -> virDomainDef conversion code was not handling
-drive arguments using the floppy bus. This caused them to be
added as hard disks instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The -no-reboot arg was added in QEMU 0.9.0, so the QEMU driver
can now assume it is always present.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.11.0 the 'info chardev' monitor command can be
used to report on allocated chardev paths, so we can drop
support for parsing QEMU stderr to locate the PTY paths.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.9.0 the -vnc option accepts a ':' to separate port
from listen address, so the QEMU driver can assume that support
for listen addresses is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The kQEMU accelerator was deleted in QEMU 0.12, so we no
longer need to support it in the QEMU driver.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Check the QEMU version and refuse to work with QEMU versions
older than 0.12.0. This is approximately the vintage of QEMU
that is available in RHEL-6 era distros.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If mlock is required either due to use of VFIO hostdevs or due to the
fact that it's enabled it needs to be tweaked prior to adding new memory
or after removing a module. Add a helper to determine when it's
necessary and reuse it both on hotplug and hotunplug.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1273491
The code reported that a migration flag is unsupported but didn't jump
to the error label. Probably an oversight in commit f88af9dc that
introduced the flag checking.
Since the flag was not enabled when 'eating' the migration cookie,
libvirt reported a bogus error when memory hotplug was enabled:
unsupported migration cookie feature memory-hotplug
The error was ignored though due to a bug in the code so it slipped
through testing.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1278404
nodeset should be freed in both success and failure paths.
While tmppath is freed immediately after it's consumed, moving it from
error to cleanup label is a bit more consistent and robust.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Generally, we use "ret" variable for storing the value we are going to
return at the and of a function, but this is not the case in
qemuProcessStart. Let's rename "ret" as "rv".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessStart was passing char * migrateFrom as the third argument to
qemuPrepareNVRAM. We should explicitly convert the pointer to bool which
is what the function expects.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1270715
Commit id '9deb96f' removed the code to fetch the nodeset from the
CpusetMems cgroup for a running vm in favor of using the return from
virDomainNumatuneFormatNodeset introduced by commit id '43b67f2e7'.
However, that API will return the value of the passed 'auto_nodeset'
when placement is VIR_DOMAIN_NUMATUNE_PLACEMENT_AUTO, which happens
to be NULL.
Since commit id 'c74d58ad' started using priv->autoNodeset in order
to manage the auto placement value during qemuProcessStart, it should
be passed along in order to return the correct value if the domain
requests the auto placement.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
In commit f41be296, we moved vm->persistent check into
qemuDomainRemoveInactive, but we didn't change the vm->persistent
before call qemuDomainRemoveInactive in some place before and just
call it to remove the inactive vm.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
This calls the PCI-, USB- and SCSI-specific functions just
like qemuHostdev{Prepare,ReAttach}DomainDevices() already do,
and was the missing piece for the qemuHostdev API to nicely
mirror the virHostdev API.
Update qemuProcessReconnect() to use the new function.
Adopt the same names used for virHostdevUpdateActive*Devices() for
consistency's sake and to make it easier to jump between the two.
No functional changes.
Adopt the same names used for virHostdevReAttach*Devices() for
consistency's sake and to make it easier to jump between the two.
No functional changes.
We have macros for both positive and negative string matching.
Therefore there is no need to use !STREQ or !STRNEQ. At the same
time as we are dropping this, new syntax-check rule is
introduced to make sure we won't introduce it again.
Signed-off-by: Ishmanpreet Kaur Khera <khera.ishman@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tunnelled migration can hang if the destination qemu exits despite all the
ABI checks. This happens whenever the destination qemu exits before the
complete transfer is noticed by source qemu. The savevm state checks at
runtime can fail at destination and cause qemu to error out.
The source qemu cant notice it as the EPIPE is not propogated to it.
The qemuMigrationIOFunc() notices the stream being broken from virStreamSend()
and it cleans up the stream alone. The qemuMigrationWaitForCompletion() would
never get to 100% transfer completion.
The qemuMigrationWaitForCompletion() never breaks out as well since
the ssh connection to destination is healthy, and the source qemu also thinks
the migration is ongoing as the Fd to which it transfers, is never
closed or broken. So, the migration will hang forever. Even Ctrl-C on the
virsh migrate wouldn't be honoured. Close the source side FD when there is
an error in the stream. That way, the source qemu updates itself and
qemuMigrationWaitForCompletion() notices the failure.
Close the FD for all kinds of errors to be sure. The error message is not
copied for EPIPE so that the destination error is copied instead later.
Note:
Reproducible with repeated migrations between Power hosts running in different
subcores-per-core modes.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1249981
When qemuDomainPinIOThread was added in commit id 'fb562614', a check
for the IOThread capability was not needed since a check for iothreadpids
covered the condition where the support for IOThreads was not present.
The iothreadpids array was only created if qemuProcessDetectIOThreadPIDs
was able to query the monitor for IOThreads. It would only do that if
the QEMU_CAPS_OBJECT_IOTHREAD capability was set.
However, when iothreadids were added in commit id '8d4614a5' and the
check for iothreadpids was replaced by a search through the iothreadids[]
array for the matching iothread_id that left open the possibility that
an iothreadids[] array was defined, but the entries essentially pointed
to elements with only the 'iothread_id' defined leaving the 'thread_id'
value of 0 and eventually the cpumap entry of NULL.
This was because, the original IOThreads commit id '72edaae7' only
checked if IOThreads were defined and if the emulator had the IOThreads
capability, then IOThread objects were added at startup. The "capability
failure" check was only done when a disk was assigned to an IOThread in
qemuCheckIOThreads. This was because the initial implementation had no way
to dynamically add IOThreads, but it was possible to dynamically add a
disk to the domain. So the decision was if the domain supported it, then
add the IOThread objects. Then if a disk with an IOThread defined was
added, it could check the capability and fail to add if not there. This
just meant the 'iothreads' value was essentially ignored.
Eventually commit id 'a27ed6e7' allowed for the dynamic addition and
deletion of IOThread objects. So it was no longer necessary to generate
IOThread objects to dynamically attach a disk to. However, the startup
and disk check code was not modified to reflect this.
This patch will move the capability failure check to when IOThread
objects are being added to the command line. Thus a domain that has
IOThreads defined will not be started if the emulator doesn't support
the capability. This means when qemuCheckIOThreads is called to add
a disk, it's no longer necessary to check the capability. Instead the
code can use the IOThreadFind call to indicate that the IOThread
doesn't exist.
Finally because it could be possible to have a domain running with the
iothreadids[] defined prior to this change if libvirtd is restarted each
having mostly empty elements, qemuProcessDetectIOThreadPIDs will check
if there are niothreadids when the QEMU_CAPS_OBJECT_IOTHREAD capability
check fails and remove the elements and array if it exists.
With these changes in place, it turns out the cputune-numatune test
was failing because the right bit wasn't set in the test. So used the
opportunity to fix that and create a test that would expect to fail
with some sort of iothreads defined and used, but not having the
correct capability.
Although theoretically both should be the same value, the niothreadids
should be used in favor of iothreads when performing comparisons. This
leaves the iothreads as a purely numeric value to be saved in the config
file. The one exception to the rule is virDomainIOThreadIDDefArrayInit
where the iothreadids are being generated from the iothreads count since
iothreadids were added after initial iothreads support.
The internal representation of a JSON array counts the items in
size_t. However, for some reason, when asking for the count it's
reported as int. Firstly, we need the function to return a signed
type as it's returning -1 on an error. But, not every system has
integer the same size as size_t. Therefore, lets return ssize_t.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Coverity notices that net->ifname is potentially referenced after a
VIR_FREE(). Since the net->ifname will eventually be free'd during
virDomainDefFree when calling virDomainNetDefFree, let's just that
processing take care the free.
Signed-off-by: John Ferlan <jferlan@redhat.com>
So imagine you want to crate new security manager:
if (!(mgr = virSecurityManagerNew("selinux", "QEMU", false, true, false, true)));
Hard to parse, right? What about this:
if (!(mgr = virSecurityManagerNew("selinux", "QEMU",
VIR_SECURITY_MANAGER_DEFAULT_CONFINED |
VIR_SECURITY_MANAGER_PRIVILEGED)));
Now that's better! This is what the commit does.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This gets rid of the partially enforced alignment and makes it less
likely for a bogus value to be introduced in the enumeration.
Capabilities are divided in five-element groups for better readability.
Use #define for QEMU_CAPS_NET_NAME and QEMU_CAPS_HOST_NET_ADD, both
of which are aliases for QEMU_CAPS_0_10.
qemuMigrationIsAllowed would disallow offline migration if the VM
contained host devices or memory modules. Since during offline migration
we don't transfer any state we can safely migrate VMs with such
configuration.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1265049
Use the migration @flags for checking various migration aspects rather
than picking them out as booleans. Document the new semantics in the
function header.
Now that qemuMigrationIsAllowed is always called with @vm, we can drop
the @def argument and simplify the control flow.
Additionally the comment is invalid so drop it.
Extract the hostdev check from qemuMigrationIsAllowed into a separate
function since that is the only part that needs to be done in the v2
migration protocol prepare phase on the destination. All other checks
were added when the v3 protocol existed so they don't need to be
extracted.
This change will allow to drop the @def argument for
qemuMigrationIsAllowed and further simplify the function.
Even though QEMU on the source host reports completed migration and thus
we move to the Finish phase, QEMU on the destination host may still be
processing migration data. Thus before we can start guest CPUs on the
destination, we have to wait for a completed migration event.
https://bugzilla.redhat.com/show_bug.cgi?id=1265902
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
With new QEMU which supports migration events,
qemuMigrationCheckJobStatus needs to explicitly query QEMU for migration
statistics once migration is completed to make sure the caller sees
up-to-date statistics with both old and new QEMU. However, some callers
are not interested in the statistics at all and once we start waiting
for a completed migration on the destination host too, checking the
statistics would even fail. Let's push the decision whether to update
the statistics or not to the caller.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function already has two bool parameters and we will need to add a
new one. Let's switch to flags to make the callers readable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The destination host gets detailed statistics about the current
migration form the source host via migration cookie and copies them to
the domain object so that they can be queried using
virDomainGetJobStats. However, we should only copy statistics to the
domain object when migration finished successfully.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Even if we are migrating a domain with VIR_MIGRATE_PAUSED flag set, we
should still update the total time of the migration. Updating downtime
doesn't hurt either, even though we don't actually start guest CPUs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemu-kvm can be used to run ppc64 guests on ppc64le hosts and vice
versa, since the hardware is actually the same and the endianness
is chosen by the guest kernel.
Up until now, however, libvirt didn't allow the use of qemu-kvm
to run guests if their endianness didn't match the host's.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1267882
Since we'd disallow migration of a guest that would have possibly
invalid config but still be able to work, relax the WWN check to be
performed only on new starts of the VM.
We are using memory-backing-file even when it's not needed, for example
if user requests hugepages for memory backing, but does not specify any
pagesize or memory node pinning. This causes migrations to fail when
migrating from older libvirt that did not do this. So similarly to
commit 7832fac847 which does it for
memory-backend-ram, this commit makes is more generic and
backend-agnostic, so the backend is not used if there is no specific
pagesize of hugepages requested, no nodeset the memory node should be
bound to, no memory access change required, and so on.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1266856
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
So since the introduction of the memory-backend-file object until now we
only added '-mem-path' for non-NUMA guests and we used the parameters of
the memory-backend-file object to specify the path to the hugetlbfs
mount. But hugepages can be also used without memory-backend-file
object, as it used to be before its introduction. Let's just get this
part of the code back and properly append the '-mem-path' for NUMA
guests as well, but only when the memory backend is not needed.
This parameter is already being applied when no numa is requested and
because we still use memory-object-file unconditionally for
hugepage-backed NUMA guests, this should not fire until later.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That function is called qemuBuildMemPathStr() and will be used in
other places in the future. The change in the test suite is proper due
to the fact that -mem-prealloc makes only sense with -mem-path (from
qemu documentation -- html/qemu-doc.html).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Support for GICv3 has been recently introduced in qemu using gic-version
option for the 'virt' machine. The option can actually take values of
'2', '3' and 'host', however, since in libvirt this is a numeric
parameter, we limit it only to 2 and 3. Value of 2 is not added to the
command line in order to keep backward compatibility with older qemu
versions.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Unfortunately qemu currently doesn't offer introspection for machine types,
so we have to rely on version number, similar to QEMU_CAPS_MACHINE_USB_OPT.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Commit 307fb904 (Sep 10) added a 'privileged' variable when creating
the DAC driver:
@@ -153,6 +157,7 @@ virSecurityManagerNewDAC(const char *virtDriver,
bool defaultConfined,
bool requireConfined,
bool dynamicOwnership,
+ bool privileged,
virSecurityManagerDACChownCallback chownCallback)
But argument order is mixed up at the caller, swapping dynamicOwnership
and privileged values. This corrects the argument order
https://bugzilla.redhat.com/show_bug.cgi?id=1266628
This seemed to be more of a false positive as for some reason Coverity
was missing the "ret < 0" goto error condition and somehow believing that
event could be overwritten. At first I thought it was just the ret != 0
condition difference, but it wasn't.
In any case, make use of the recent change to qemuDomainEventQueue to
check event == NULL and just pass it as a parameter directly in the
error path. That avoids the error.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity complains that return from virHookCall is not checked in
one place in qemuProcessStop. Since the comment notes that we cannot
stop the operation even it if fails, just added the ignore_value.
So while working on my previous patches, I've noticed that
virDomainRestore implementation in qemu and test drivers has the
same problem as I am fixing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far we have the following pattern occurring over and over
again:
if (!vm->persistent)
qemuDomainRemoveInactive(driver, vm);
It's safe to put the check into the function and save some LoC.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=871452
So, you want to create a domain from XML. The domain already
exists in libvirt's database of domains. It's okay, because name
and UUID matches. However, on domain startup, internal
representation of the domain is overwritten with your XML even
though we claim that the XML you've provided is a transient one.
The bug is to be found across nearly all the drivers.
Le sigh.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=871452
Okay, so we allow users to 'virsh create' an already existing
domain, providing completely different XML than the one stored in
Libvirt. Well, as long as name and UUID matches. However, in some
drivers the code that handles errors unconditionally removes the
domain that failed to start even though the domain might have
been persistent. Fortunately, the domain is removed just from the
internal list of domains and the config file is kept around.
Steps to reproduce:
1) virsh dumpxml $dom > /tmp/dom.xml
2) change XML so that it is still parse-able but won't boot, e.g.
change guest agent path to /foo/bar
3) virsh create /tmp/dom.xml
4) virsh dumpxml $dom
5) Observe "No such domain" error
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I initially added this in order to keep the code more error-prone to
following additions, but it seems it's still frowned upon.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Now that virQEMUDriverCreateXMLConf is never called with NULL
(after 086f37e97a) we can safely drop useless check in
qemuDomainDeviceDefPostParse as we are guaranteed to be always
called with the driver initialized. Therefore checking if driver
is NULL makes no sense. Moreover, if we mix it with direct driver
dereference. And after that, we are sure that nor @cfg will be
NULL, therefore we can drop checks for that too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Qemu unfortunately doesn't update internal state right after migration
and so the actual balloon size as returned by 'query-balloon' are
invalid for a while after the CPUs are started after migration. If we'd
refresh our internal state at this point we would report invalid current
memory size until the next balloon event would arrive.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1242940
My original implementation was based on a qemu version that still did
not have all the checks in place. Using sizes that would align to odd
megabyte increments will produce the following error:
qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,id=dimm0: backend memory size must be multiple of 0x200000
qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,id=dimm0: Device 'pc-dimm' could not be initialized
Introduce an alignment retrieval function for memory devices and use it
to align the devices separately and modify a test case to verify it.
For some machine types ppc64 machines now require that memory sizes are
aligned to 256MiB increments (due to the dynamically reconfigurable
memory). As now we treat existing configs reasonably in regards to
migration, we can round all the sizes unconditionally. The only drawback
will be that the memory size of a VM can potentially increase by
(256MiB - 1byte) * number_of_NUMA_nodes.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1249006
When we are starting a qemu process for an incomming migration or
snapshot reloading we should not modify the memory sizes in the domain
since we could potentially change the guest ABI that was tediously
checked before. Additionally the function now updates the initial memory
size according to the NUMA node size, which should not happen if we are
restoring state.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1252685
When implementing memory hotplug I've opted to recalculate the initial
memory size (contents of the <memory> element) as a sum of the sizes of
NUMA nodes when NUMA was enabled. This was based on an assumption that
qemu did not allow starting when the NUMA node size total didn't equal
to the initial memory size. Unfortunately the check was introduced to
qemu just lately.
This patch uses the new XML parser flag to decide whether it's safe to
update the memory size total from the NUMA cell sizes or not.
As an additional improvement we now report an error in case when the
size of hotplug memory would exceed the total memory size.
The rest of the changes assures that the function is called with correct
flags.
Add 'initial_memory' member to struct virDomainMemtune so that the
memory size can be pre-calculated once instead of inferring it always
again and again.
Separating of the fields will also allow finer granularity of decisions
in later patches where it will allow to keep the old initial memory
value in cases where we are handling incomming migration from older
versions that did not always update the size from NUMA as the code did
previously.
The change also requires modification of the qemu memory alignment
function since at the point where we are modifying the size of NUMA
nodes the total size needs to be recalculated too.
The refactoring done in this patch also fixes a crash in the hyperv
driver that did not properly initialize def->numa and thus
virDomainNumaGetMemorySize(def->numa) crashed.
In summary this patch should have no functional impact at this point.
Add a new parser flag that will mark code paths that parse XML files
wich will not be used with existing VM state so that post parse
callbacks can possibly do ABI incompatible changes if needed.
Extract the size determination into a separate function and reuse it
across the memory device alignment functions. Since later we will need
to decide the alignment size according to architecture let's pass def to
the functions.
Since test suite now correctly creates capabilities cache, the hack is not
needed any more.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The main purpose of this patch is to introduce test mode to
virQEMUCapsCacheLookup(). This is done by adding a global variable, which
effectively overrides binary name. This variable is supposed to be set by
test suite.
The second addition is qemuTestCapsCacheInsert() function which allows the
test suite to actually populate the cache.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
So far this function was not kept in sync with changing
virDomainDiskDef. Fill in all the missing checks and reorganize
their order so it's easier to track which items are not being
checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I always felt like this function is qemu specific rather than
libvirt-wide. Other drivers may act differently on virDomainDef
change and in fact may require talking to underlying hypervisor
even if something else's than disk->src has changed. I know that
the function is still incomplete, but lets break that into two
commits that are easier to review. This one is pure code
movement.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
