dump-guest-memory is a new dump mechanism, and it can work when the
guest uses host devices. This patch adds a API to use this new
monitor command.
We will always use json mode if qemu's version is >= 0.15, so I
don't implement the API for text mode.
This reverts
commit c16b4c43fc
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Fri May 11 15:09:27 2012 +0100
Avoid LXC pivot root in the root source is still /
This commit broke setup of /dev, because the code which
deals with setting up a private /dev and /dev/pts only
works if you do a pivotroot.
The original intent of avoiding the pivot root was to
try and ensure the new root has a minimumal mount
tree. The better way todo this is to just unmount the
bits we don't want (ie old /proc & /sys subtrees.
So apply the logic from
commit c529b47a75
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Fri May 11 11:35:28 2012 +0100
Trim /proc & /sys subtrees before mounting new instances
to the pivot_root codepath as well
Libvirt updates the configuration of SPICE server only when something
changes. This is unfortunate when the user wants to disconnect a
existing spice session when the connected attribute is already
"disconnect".
This patch modifies the conditions for calling the password updater to
be called when nothing changes, but the connected attribute is already
"disconnect".
While unescaping the commands the commands passed through to the monitor
function qemuMonitorUnescapeArg() initialized lenght of the input string
to strlen()+1 which is fine for alloc but not for iteration of the
string.
This patch fixes the off-by-one error and drops the pointless check for
a single trailing slash that is automaticaly handled by the default
branch of switch.
commit 52d064f42d added
VIR_NETWORK_XML_INACTIVE in order to allow suppressing the
auto-generated list of VFs in network definitions, and a --inactive
flag to virsh net-dumpxml to take advantage of the flag. However, it
missed out on two opportunities:
1) Use INACTIVE to get the current config of the network as it
exists on disk, rather than the currently active config.
2) Add INACTIVE to the flags used for the virsh net-edit command, so
that it won't include the forward-pool interfaces that were
autogenerated, and so that a re-edit of the network prior to
restarting it will show any other edits made since the last restart
of the network. (prior to this patch, if you edited a network a 2nd
time without restarting, all of the previous edits would magically
disappear).
In order to fit with the new #define-based generic edit function in
virsh.c, a new function vshNetworkGetXMLDesc() was added. This
function first tries to call virNetworkGetXMLDesc with the INACTIVE
flag added, then retries without if the first attempt fails (in the
manner expected when the server doesn't support it).
A core use case of the hook scripts is to be able to do things
to a guest's network configuration. It is possible to hook into
the 'start' operation for a QEMU guest which runs just before
the guest is started. The TAP devices will exist at this point,
but the QEMU process will not. It can be desirable to have a
'started' hook too, which runs once QEMU has started.
If libvirtd is restarted it will re-populate firewall rules,
but there is no QEMU hook to trigger for existing domains.
This is solved with a 'reconnect' hook.
Finally, if attaching to an external QEMU process there needs
to be an 'attach' hook script.
This all also applies to the LXC driver
* docs/hooks.html.in: Document new operations
* src/util/hooks.c, src/util/hooks.c: Add 'started', 'reconnect'
and 'attach' operations for QEMU. Add 'prepare', 'started',
'release' and 'reconnect' operations for LXC
* src/lxc/lxc_driver.c: Add hooks for 'prepare', 'started',
'release' and 'reconnect' operations
* src/qemu/qemu_process.c: Add hooks for 'started', 'reconnect'
and 'reconnect' operations
First 'poll' can't return EWOULDBLOCK, and second, we're checking errno
so far away from the poll() call that we've probably already trashed the
original errno value.
In addition to keepalive responses, we also need to send keepalive
requests from client IO loop to properly detect dead connection in case
a libvirt API is called from the main loop, which prevents any timers to
be called.
The previous commit removed the only usage of ``all'' parameter in
virKeepAliveStopInternal, which was actually the only reason for having
virKeepAliveStopInternal. This effectively reverts most of commit
6446a9e20c.
When a libvirt API is called from the main event loop (which seems to be
common in event-based glib apps), the client IO loop would properly
handle keepalive requests sent by a server but will not actually send
them because the main event loop is blocked with the API. This patch
gets rid of response timer and the thread which is processing keepalive
requests is also responsible for queueing responses for delivery.
Add virKeepAliveTimeout and virKeepAliveTrigger APIs that can be used to
set poll timeouts and trigger keepalive timer. virKeepAliveTrigger
checks if it is called to early and does nothing in that case.
The code that needs to be run every keepalive interval of inactivity was
only called from a timer and thus from the main event loop. We will need
to call the code directly from another place.
As non-blocking calls are no longer dropped, we don't really need to
care that much about their fate and wait for the thread with the buck
to process them. If another thread has the buck, we can just push a
non-blocking call to the queue and be done with it.
So far, we were dropping non-blocking calls whenever sending them would
block. In case a client is sending lots of stream calls (which are not
supposed to generate any reply), the assumption that having other calls
in a queue is sufficient to get a reply from the server doesn't work. I
tried to fix this in b1e374a7ac but
failed and reverted that commit.
With this patch, non-blocking calls are never dropped (unless the
connection is being closed) and will always be sent.
Normally, when every call has a thread associated with it, the thread
may get the buck and be in charge of sending all calls until its own
call is done. When we introduced non-blocking calls, we had to add
special handling of new non-blocking calls. This patch uses event loop
to send data if there is no thread to get the buck so that any
non-blocking calls left in the queue are properly sent without having to
handle them specially. It also avoids adding even more cruft to client
IO loop in the following patches.
With this change in, non-blocking calls may see unpredictable delays in
delivery when the client has no event loop registered. However, the only
non-blocking calls we have are keepalives and we already require event
loop for them, which makes this a non-issue until someone introduces new
non-blocking calls.
'make dist' was depending on *protocol-structs files, which are
stored in git but in turn depended on generated files. We still
want to ship the protocol-structs files, but by renaming the
tests to something not matching a file name, we separate 'make
check' (which depends on the generated file) from 'make dist'
(which only depends on the git files). After all, the tarball
should never depend on a generated file not stored in git.
I found one more case of a git file depending on a generated
file, in a bogus virkeycode.c listing; but at least this one
had no associated rules so it never broke 'make dist'.
Reported by Wen Congyang. Latent bug has been present since
commit 62dee6f, but only recently exposed by commit 7bff56a.
* src/Makefile.am ($(srcdir)/util/virkeycode.c): Drop useless
dependency.
(BUILT_SOURCES): ...and build virkeymaps.h sooner.
(PROTOCOL_STRUCTS): Rather than depend on the struct file...
(check-local): ...convert things into a phony target of...
(check-protocol): ...a new check.
($(srcdir)/remote_protocol-struct): Rename to isolate the distributed
file from the conditional test.
(PDWTAGS): Deal with rename. Swap to compare 'expected actual'.
Currently, if qemuProcessStart fail at some point, e.g. because
domain being started wants a PCI/USB device already assigned to
a different domain, we jump to cleanup label where qemuProcessStop
is performed. This unconditionally calls virSecurityManagerRestoreAllLabel
which is wrong because the other domain is still using those devices.
However, once we successfully label all devices/paths in
qemuProcessStart() from that point on, we have to perform a rollback
on failure - that is - we have to virSecurityManagerRestoreAllLabel.
The two APIs are rather trivial; based on bits and pieces of other
existing APIs. It leaves the door open for future extension to
qemu to report snapshots without metadata based on reading qcow2
internal snapshot names.
* src/qemu/qemu_driver.c (qemuDomainSnapshotIsCurrent)
(qemuDomainSnapshotHasMetadata): New functions.
Right now, starting from just a virDomainSnapshotPtr, and wanting to
know if it is the current snapshot for its respective domain, you have
to use virDomainSnapshotGetDomain(), then virDomainSnapshotCurrent(),
then compare the two names returned by virDomainSnapshotGetName().
It is a bit easier if we can directly query this information from the
snapshot itself.
Right now, it is possible to filter a snapshot listing based on
whether snapshots have metadata that would prevent domain deletion,
but the only way to learn if an individual snapshot has metadata is
to see if that snapshot appears in the list returned by a listing.
Additionally, I hope to expand the qemu driver in a future patch to
use qemu-img to reconstruct snapshot XML corresponding to internal
qcow2 snapshot names not otherwise tracked by libvirt (in part, so
that libvirt can guarantee that new snapshots are not created with
a name that would silently corrupt the existing portion of the qcow2
file); if I ever get that in, then it would no longer be an all-or-none
decision on whether snapshots have metadata, and becomes all the more
important to be able to directly determine that information from a
particular snapshot.
Other query functions (such as virDomainIsActive) do not have a flags
argument, but since virDomainHasCurrentSnapshot takes a flags argument,
I figured it was safer to provide a flags argument here as well.
* include/libvirt/libvirt.h.in (virDomainSnapshotIsCurrent)
(virDomainSnapshotHasMetadata): New declarations.
* src/libvirt.c (virDomainSnapshotIsCurrent)
(virDomainSnapshotHasMetadata): New functions.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export them.
* src/driver.h (virDrvDomainSnapshotIsCurrent)
(virDrvDomainSnapshotHasMetadata): New driver callbacks.
Right now, the only way to get at the contents of a virBuffer is
to destroy it. But there are cases in my upcoming patches where
peeking at the contents makes life easier. I suppose this does
open up the potential for bad code to dereference a stale pointer,
by disregarding the docs that the return value is invalid on the
next virBuf operation, but such is life.
* src/util/buf.h (virBufferCurrentContent): New declaration.
* src/util/buf.c (virBufferCurrentContent): Implement it.
* src/libvirt_private.syms (buf.h): Export it.
* tests/virbuftest.c (testBufAutoIndent): Test it.
My latest patch for RPC rework (a2c304f687) introduced a memory leak.
virNetMessageEncodeHeader() is calling VIR_ALLOC_N(msg->buffer, ...)
despite fact, that msg->buffer isn't VIR_FREE()'d on all paths calling
the function. Therefore, rather than injecting free statement switch to
VIR_REALLOC_N().
when do remount,the source and target should be the same
values specified in the initial mount() call.
So change fs->dst to src.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
virDomainSnapshotPtr has a refcount member, but no one was able
to use it. Furthermore, all of our other vir*Ptr objects have
a *Ref method to match their *Free method. Thankfully, this is
client-side only, so we can use this new function regardless of
how old the server side is! (I have future patches to virsh
that want to use it.)
* include/libvirt/libvirt.h.in (virDomainSnapshotRef): Declare.
* src/libvirt.c (virDomainSnapshotRef): Implement it.
* src/libvirt_public.syms (LIBVIRT_0.9.13): Export it.
When libvirtd forks off a new child, the child then calls virLogReset(),
which ends up closing file descriptors used as log outputs. However, we
recently started logging closed file descriptors, which means we need to
lock logging mutex which was already locked by virLogReset(). We don't
really want to log anything when we are in the process of closing log
outputs.
For pseries guest, spapr-vlan and spapr-vty is based
on spapr-vio address. According to model of network
device, the address type should be assigned automatically.
For serial device, serial pty device is recognized as
spapr-vty device, which is also on spapr-vio.
So this patch is to correct the address type of
spapr-vlan and spapr-vty, and build correct
command line of spapr-vty.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Reviewed-by: Michael Ellerman<michaele@au1.ibm.com>
There is a theoretical problem of an extreme bug where we can get
into deadlock due to command handshaking. Thanks to a pair of pipes,
we have a situation where the parent thinks the child reported an
error and is waiting for a message from the child to explain the
error; but at the same time the child thinks it reported success
and is waiting for the parent to acknowledge the success; so both
processes are now blocked.
Thankfully, I don't think this deadlock is possible without at
least one other bug in the code, but I did see exactly that sort
of situation prior to commit da831af - I saw a backtrace where a
double close bug in the parent caused the parent to read from the
wrong fd and assume the child failed, even though the child really
sent success.
This potential deadlock is not quite like commit 858c247 (a deadlock
due to multiple readers on one pipe preventing a write from completing),
although the solution is similar - always close unused pipe fds before
blocking, rather than after.
* src/util/command.c (virCommandHandshakeWait): Close unused fds
sooner.
When libvirtd is started and there is an unusable/not-connectable
leftover from earlier started machine, it's more reasonable to say
that the machine "crashed" if we know it was started with
"-no-shutdown".
This patch fixes that and also changes the other result (when machine
was started without "-no-shutdown") to "unknown", because the previous
"failed" reason means (according to include/libvirt/libvirt.h.in:174),
that the machine failed to start.
Commit 7bff56a worked in an incremental build, but fails for a
fresh clone; apparently, if make sees both an actual file
spelling and an inference rule, only the exact spelling is used.
CCLD libvirt_driver_test.la
CC libvirt_driver_remote_la-remote_driver.lo
remote/remote_driver.c:4707:34: fatal error: remote_client_bodies.h: No such file or directory
compilation terminated.
BUILT_SOURCES to the rescue, instead of trying to mess with .lo
dependencies directly.
* src/Makefile.am (REMOTE_DRIVER_PREREQS, %remote_driver.lo): Drop...
(BUILT_SOURCES): ...and add here instead.
Commit 1c275e9a accidentally dropped the storage driver from
libvirtd, because it depended on a C preprocessor macro that
was not defined. Furthermore, if you do './configure
--without-storage-dir --with-storage-disk' or any other combination
where you explicitly build a subset of storage backends excluding
the dir backend, then the build is broken.
Based on analysis by Osier Yang.
* configure.ac (WITH_STORAGE): Define top-level conditional.
* src/Makefile.am (mod_LTLIBRARIES): Build driver even when
storage_dir is disabled.
* daemon/libvirtd.c: Pick up storage driver for any backend, not
just dir.
* daemon/Makefile.am (libvirtd_LDADD): Likewise.
Since we are allocating RPC buffer dynamically, we can increase limits
for max. size of RPC message and RPC string. This is needed to cover
some corner cases where libvirt is run on such huge machines that their
capabilities XML is 4 times bigger than our current limit. This leaves
users with inability to even connect.
Currently, we are allocating buffer for RPC messages statically.
This is not such pain when RPC limits are small. However, if we want
ever to increase those limits, we need to allocate buffer dynamically,
based on RPC message len (= the first 4 bytes). Therefore we will
decrease our mem usage in most cases and still be flexible enough in
corner cases.
We had a distributed file (remote_protocol.h, which in turn was
a prereq to remote_driver.c) depending on a generated file
(libvirt_probes.h), which is a no-no for a VPATH build from a
read-only source tree (no wonder 'make distcheck' tests precisely
that situation):
File `libvirt_driver_remote.la' does not exist.
File `libvirt_driver_remote_la-remote_driver.lo' does not exist.
Prerequisite `libvirt_probes.h' is newer than target `../../src/remote/remote_protocol.h'.
Must remake target `../../src/remote/remote_protocol.h'.
Invoking recipe from Makefile:7464 to update target `../../src/remote/remote_protocol.h'.
make[3]: Entering directory `/home/remote/eblake/libvirt-tmp2/build/libvirt-0.9.12/_build/src'
GEN ../../src/remote/remote_protocol.h
cannot create ../../src/remote/remote_protocol.h: Permission denied at ../../src/rpc/genprotocol.pl line 31.
make[3]: *** [../../src/remote/remote_protocol.h] Error 13
Rather than making distributed .c files depend on generated files, we
really want to ensure that compilation into .lo files is not attempted
until the generated files are present, done by this patch. Since there
were two different sets of conditionally generated files that both
feed the .lo file, I had to introduce a new variable REMOTE_DRIVER_PREREQS
to keep automake happy.
After that fix, the next issue was that make treats './foo' and 'foo'
differently in determining whether an implicit %foo rule is applicable,
with the result that locking/qemu-sanlock.conf wasn't properly being
built at the right times. Also, the output for using the .aug test
files was a bit verbose.
After fixing the src directory, the next error is related to the docs
directory, where the tarball is missing a stamp file and thus tries to
regenerate files that are already present:
GEN ../../docs/apibuild.py.stamp
Traceback (most recent call last):
File "../../docs/apibuild.py", line 2511, in <module>
rebuild("libvirt")
File "../../docs/apibuild.py", line 2495, in rebuild
builder.serialize()
File "../../docs/apibuild.py", line 2424, in serialize
output = open(filename, "w")
IOError: [Errno 13] Permission denied: '../../docs/libvirt-api.xml'
make[5]: *** [../../docs/apibuild.py.stamp] Error 1
and fixing that exposed another case of a distributed file (generated
html) depending on a built file (libvirt.h), but only when doing an
in-tree build, because of a file glob.
* src/Makefile.am ($(srcdir)/remote/remote_driver.c): Change...
(libvirt_driver_remote_la-remote_driver.lo): ...to the real
dependency.
($(builddir)/locking/%-sanlock.conf): Drop $(builddir), so that
rule gets run in time for test_libvirt_sanlock.aug.
(test_libvir*.aug): Cater to silent build.
(conf_DATA): Don't ship qemu-sanlock.conf in the tarball, since it
is trivial to regenerate.
* docs/Makefile.am (EXTRA_DIST): Ship our stamp file.
($(APIBUILD_STAMP)): Don't depend on generated file.
I came across a bug that the command line generated for passthrough
of the host parallel port /dev/parport0 by libvirt for QEMU is incorrect.
It currently produces:
-chardev tty,id=charparallel0,path=/dev/parport0
-device isa-parallel,chardev=charparallel0,id=parallel0
The first parameter is "tty". It sould be "parport".
If I launch qemu with -chardev parport,... it works as expected.
I have already filled a bug report (
https://bugzilla.redhat.com/show_bug.cgi?id=823879 ), the topic was
already on the list some months ago:
https://www.redhat.com/archives/libvirt-users/2011-September/msg00095.html
Signed-off-by: Eric Blake <eblake@redhat.com>
It is possible to deadlock libvirt by having a domain with XML
longer than PIPE_BUF, and by writing a hook script that closes
stdin early. This is because libvirt was keeping a copy of the
child's stdin read fd open, which means the write fd in the
parent will never see EPIPE (remember, libvirt should always be
run with SIGPIPE ignored, so we should never get a SIGPIPE signal).
Since there is no error, libvirt blocks waiting for a write to
complete, even though the only reader is also libvirt. The
solution is to ensure that only the child can act as a reader
before the parent does any writes; and then dealing with the
fallout of dealing with EPIPE.
Thankfully, this is not a security hole - since the only way to
trigger the deadlock is to install a custom hook script, anyone
that already has privileges to install a hook script already has
privileges to do any number of other equally disruptive things
to libvirt; it would only be a security hole if an unprivileged
user could install a hook script to DoS a privileged user.
* src/util/command.c (virCommandRun): Close parent's copy of child
read fd earlier.
(virCommandProcessIO): Don't let EPIPE be fatal; the child may
be done parsing input.
* tests/commandhelper.c (main): Set up a SIGPIPE situation.
* tests/commandtest.c (test20): Trigger it.
* tests/commanddata/test20.log: New file.
Although src/util/viratomic.h has been added to the repo, up until now
it hasn't been used. Stefan Berger is using it in his proposed dhcp
snooping patches, and an rpm build with those patches failed due to
viratomic.h not being packed up with the rest of the sources.
EBADF errors are logged as warnings as they normally indicate a double
close bug. This patch also provides VIR_MASS_CLOSE helper to be user in
the only case of mass close after fork when EBADF should rather be
ignored.
With support for multiple IP addresses per interface in place, this patch
now adds support for multiple IP addresses per interface for the DHCP
snooping code.
Testing:
Since the infrastructure I tested this with does not provide multiple IP
addresses per MAC address (anymore), I either had to plug the VM's interface
from the virtual bride connected directly to the infrastructure to virbr0
to get a 2nd IP address from dnsmasq (kill and run dhclient inside the VM)
or changed the lease file (/var/run/libvirt/network/nwfilter.leases) and
restart libvirtd to have a 2nd IP address on an existing interface.
Note that dnsmasq can take a lease timeout parameter as part of the --dhcp-range
command line parameter, so that timeouts can be tested that way
(--dhcp-range 192.168.122.2,192.168.122.254,120). So, terminating and restarting
dnsmasq with that parameter is another choice to watch an IP address disappear
after 120 seconds.
Regards,
Stefan
The goal of this patch is to prepare for support for multiple IP
addresses per interface in the DHCP snooping code.
Move the code for the IP address map that maps interface names to
IP addresses into their own file. Rename the functions on the way
but otherwise leave the code as-is. Initialize this new layer
separately before dependent layers (iplearning, dhcpsnooping)
and shut it down after them.
This patch adds DHCP snooping support to libvirt. The learning method for
IP addresses is specified by setting the "CTRL_IP_LEARNING" variable to one of
"any" [default] (existing IP learning code), "none" (static only addresses)
or "dhcp" (DHCP snooping).
Active leases are saved in a lease file and reloaded on restart or HUP.
The following interface XML activates and uses the DHCP snooping:
<interface type='bridge'>
<source bridge='virbr0'/>
<filterref filter='clean-traffic'>
<parameter name='CTRL_IP_LEARNING' value='dhcp'/>
</filterref>
</interface>
All filters containing the variable 'IP' are automatically adjusted when
the VM receives an IP address via DHCP. However, multiple IP addresses per
interface are silently ignored in this patch, thus only supporting one IP
address per interface. Multiple IP address support is added in a later
patch in this series.
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Currently, monitoring QEMU virtual machines with standard Unix
sysadmin tools is harder than it has to be. The QEMU command line is
often miles long and mostly redundant, it's hard to tell which process
is which.
This patch reorders the QEMU -name argument to be the first, so it's
immediately visible in "ps x", htop and "atop -c" output.
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=827519
The problem is that an interface with type='hostdev' will have an
alias of the form "hostdev%d", while the function that looks through
existing netdevs to determine the name to use for a new addition will
fail if there's an existing entry that does not match the form
"net%d".
This is another of the handful of places that need an exception due to
the hybrid nature of <interface type='hostdev'> (which is not exactly
an <interface> or a <hostdev>, but is both at the same time).
If we migrate to fd, spec->fwdType is not MIGRATION_FWD_DIRECT,
we will close spec->dest.fd.local in qemuMigrationRun(). So we
should set spec->dest.fd.local to -1 in qemuMigrationRun().
Bug present since 0.9.5 (commit 326176179).
Wen Congyang reported that we have a double-close bug if we fail
virFDStreamOpenInternal, since childfd duplicated one of the fds[]
array contents. In truth, since we always transfer both members
of fds to other variables, we should close the fds through those
other names, and just use fds[] for pipe().
Bug present since 0.9.0 (commit e886237a).
* src/fdstream.c (virFDStreamOpenFileInternal): Swap scope of
childfd and fds[], to avoid a double close.
KAMEZAWA Hiroyuki reported a nasty double-free bug when virCommand
is used to convert a string into input to a child command. The
problem is that the poll() loop of virCommandProcessIO would close()
the write end of the pipe in order to let the child see EOF, then
the caller virCommandRun() would also close the same fd number, with
the second close possibly nuking an fd opened by some other thread
in the meantime. This in turn can have all sorts of bad effects.
The bug has been present since the introduction of virCommand in
commit f16ad06f.
This is based on his first attempt at a patch, at
https://bugzilla.redhat.com/show_bug.cgi?id=823716
* src/util/command.c (_virCommand): Drop inpipe member.
(virCommandProcessIO): Add argument, to avoid closing caller's fd
without informing caller.
(virCommandRun, virCommandNewArgs): Adjust clients.
Apart from the non-sanlock check build, there is also a little fix for
qemu (EXTRA_DIST had qemu.conf and others inside even if the build was
supposed to be without qemu).
Some of our rules used $(PERL), while others used 'perl'. Always
using the variable allows a developer to point to a different (often
better) perl than the default one found on $PATH.
* daemon/Makefile.am ($(srcdir)/remote_dispatch.h): s/perl/$(PERL).
* src/Makefile.am ($(srcdir)/remote/remote_client_bodies.h)
(PDWTAGS, %protocol.c, %_probes.stp): Likewise.
Without this fix, a VPATH build (such as used by ./autobuild.sh)
fails with messages like:
make[3]: Entering directory `/home/remote/eblake/libvirt-tmp2/build/daemon'
../../build-aux/augeas-gentest.pl libvirtd.conf ../../daemon/test_libvirtd.aug.in test_libvirtd.aug
cannot read libvirtd.conf: No such file or directory at ../../build-aux/augeas-gentest.pl line 38.
Since the test files are not part of the tarball, we can generate
them into the build dir, but rather than create a subdirectory
just for the test file, it is easier to test them directly in
libvirt.git/src.
* daemon/Makefile.am (AUG_GENTEST): Factor out definition.
(test_libvirtd.aug): Look for correct file.
* src/Makefile.am (AUG_GENTEST): Use $(PERL).
(qemu/test_libvirtd_qemu.aug, lxc/test_libvirtd_lxc.aug)
(locking/test_libvirt_sanlock.aug): Rename to avoid subdirectories.
(check-augeas-qemu, check-augeas-lxc, check-augeas-sanlock): Reflect
location of built tests.
* configure.ac (PERL): Substitute perl.
Currently, we are logging only one side of pipes we
create in virCommandRequireHandshake(); This is enough
in cases where pipe2() returns two consecutive FDs. However,
it is not guaranteed and it may return any FDs.
Therefore, it's wise to log the other ends as well.
When getting number of CPUs the host has assigned, there was always
number "1" returned. Even though all lxc domains with no pinning
launched by libvirt run on all pCPUs (by default, no matter what's the
number), we should at least return the same number as the user
specified when creating the domain.
I added libvirt_qemu_probes.h into BUILT_SOURCES. That makes it
generated, but most probably it is not the clearest way how to do
that, but it fixes the build.
The previous patch fixed an incremental build, but missed that on
a fresh checkout, we now have nothing left that stops make from
nuking libvirt_qemu_probes.o.
* src/Makefile.am ($(libvirt_driver_qemu_la_SOURCES)): Delete,
since this variable is empty.
(.PRECIOUS): Add %_probes.o, so they don't get nuked as an
intermediate by-product after creating %_probes.lo.
The moment you specify a _DEPENDENCIES, older automake (stupidly)
assumes that you will specify _all_ dependencies for that target.
This stupidity has been fixed in automake 1.12, but we cannot rely on
newer automake everywhere. For libvirt_la_DEPENDENCIES, we took
care of providing the full list, but for libvirt_qemu_la_DEPENDENCIES,
we were missing the dependency on libvirt_qemu_impl.la, which resulted
in a failed build:
make[3]: Entering directory `/home/ajia/Workspace/libvirt/src'
CCLD libvirt_driver_qemu.la
libtool: link: `libvirt_qemu_probes.lo' is not a valid libtool object
* src/Makefile.am (libvirt_driver_qemu_la_DEPENDENCIES): Delete;
automake does a better job if it does the entire job.
==3240== 23 bytes in 1 blocks are definitely lost in loss record 242 of 744
==3240== at 0x4C2A4CD: malloc (vg_replace_malloc.c:236)
==3240== by 0x8077537: __vasprintf_chk (vasprintf_chk.c:82)
==3240== by 0x509C677: virVasprintf (stdio2.h:199)
==3240== by 0x509C733: virAsprintf (util.c:1912)
==3240== by 0x1906583A: qemudStartup (qemu_driver.c:679)
==3240== by 0x511991D: virStateInitialize (libvirt.c:809)
==3240== by 0x40CD84: daemonRunStateInit (libvirtd.c:751)
==3240== by 0x5098745: virThreadHelper (threads-pthread.c:161)
==3240== by 0x7953D8F: start_thread (pthread_create.c:309)
==3240== by 0x805FF5C: clone (clone.S:115)
To ensure consistent error reporting of invalid arguments,
provide a number of predefined helper methods & macros.
- An arg which must not be NULL:
virCheckNonNullArgReturn(argname, retvalue)
virCheckNonNullArgGoto(argname, label)
- An arg which must be NULL
virCheckNullArgGoto(argname, label)
- An arg which must be positive (ie 1 or greater)
virCheckPositiveArgGoto(argname, label)
- An arg which must not be 0
virCheckNonZeroArgGoto(argname, label)
- An arg which must be zero
virCheckZeroArgGoto(argname, label)
- An arg which must not be negative (ie 0 or greater)
virCheckNonNegativeArgGoto(argname, label)
* src/libvirt.c, src/libvirt-qemu.c,
src/nodeinfo.c, src/datatypes.c: Update to use
virCheckXXXX macros
* po/POTFILES.in: Add libvirt-qemu.c and virterror_internal.h
* src/internal.h: Define macros for checking invalid args
* src/util/virterror_internal.h: Define macros for reporting
invalid args
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Libtool is picky about linking against a module library (aka a .so);
giving lots of warnings like this in the tests directory:
CCLD networkxml2argvtest
*** Warning: Linking the executable networkxml2argvtest against the loadable module
*** libvirt_driver_network.so is not portable!
Fix that by splitting things into a convenience library which can
be used directly by the tests, and making the real .so just wrap
the convenience library.
Based on a suggestion by Daniel P. Berrange.
* configure.ac (--with-driver-modules): Fix help test.
* src/Makefile.am (libvirt_driver_xen.la, libvirt_driver_libxl.la)
(libvirt_driver_qemu.la, libvirt_driver_lxc.la)
(libvirt_driver_uml.la): Factor into new convenience libraries.
* tests/Makefile.am (xen_LDADDS, qemu_LDADDS, lxc_LDADDS)
(networkxml2argvtest_LDADD): Link to convenience libraries, not
shared libraries.
There was no rule forcing libvirt_qemu_probes.o to be built
before libvirt_qemu_probes.lo was used. Also libvirtd was
still referencing the .o file, rather than the .lo file.
Both the .lo and .o file must be listed as DEPENDENCIES,
otherwise libtool will unhelpfully delete the .o file
once the .lo file is created.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The CoTaskMemFree function requires the ole32 DLL to be
linked against. Currently this is only done for the
VirtualBox driver. Also add it to libvirt_util.la
* configure.ac: Unconditionally add ole32 DLL to Win32
* src/Makefile.am: Link old32 to libvirt_util.la
When adding new config file parameters, the corresponding
additions to the augeas lens' are constantly forgotten.
Also there are augeas test cases, these don't catch the
error, since they too are never updated.
To address this, the augeas test cases need to be auto-generated
from the example config files.
* build-aux/augeas-gentest.pl: Helper to generate an
augeas test file, substituting in elements from the
example config files
* src/Makefile.am, daemon/Makefile.am: Switch to
auto-generated augeas test cases
* daemon/test_libvirtd.aug, daemon/test_libvirtd.aug.in,
src/locking/test_libvirt_sanlock.aug,
src/locking/test_libvirt_sanlock.aug.in,
src/lxc/test_libvirtd_lxc.aug,
src/lxc/test_libvirtd_lxc.aug.in,
src/qemu/test_libvirtd_qemu.aug,
src/qemu/test_libvirtd_qemu.aug.in: Remove example
config file data, replacing with a ::CONFIG:: placeholder
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently all the config options are listed under a 'vnc_entry'
group. Create a bunch of new groups & move options to the
right place
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add nmissing 'host_uuid' entry to libvirtd.conf lens and
rename spice_passwd to spice_password in qemu.conf lens
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of doing
# example_config
use
#example_config
so it is possible to programatically uncomment example config
options, as distinct from their comment/descriptions
Also delete rogue trailing comma not allowed by lens
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add an impl of +virGetUserRuntimeDirectory, virGetUserCacheDirectory
virGetUserConfigDirectory and virGetUserDirectory for Win32 platform.
Also create stubs for non-Win32 platforms which lack getpwuid_r()
In adding these two helpers were added virFileIsAbsPath and
virFileSkipRoot, along with some macros VIR_FILE_DIR_SEPARATOR,
VIR_FILE_DIR_SEPARATOR_S, VIR_FILE_IS_DIR_SEPARATOR,
VIR_FILE_PATH_SEPARATOR, VIR_FILE_PATH_SEPARATOR_S
All this code was adapted from GLib2 under terms of LGPLv2+ license.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove the uid param from virGetUserConfigDirectory,
virGetUserCacheDirectory, virGetUserRuntimeDirectory,
and virGetUserDirectory
These functions were universally called with the
results of getuid() or geteuid(). To make it practical
to port to Win32, remove the uid parameter and hardcode
geteuid()
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When you try to connect to a socket in the abstract namespace,
the error will be ECONNREFUSED for a non-listening daemon. With
the non-abstract namespace though, you instead get ENOENT. Add
a check for this extra errno when auto-spawning the daemon
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove a number of pointless checks against PATH_MAX and
add a syntax-check rule to prevent its use in future
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Libtool supports linking directly against .o files on some platforms
(such as Linux), which happens to be the only place where we are
actually doing that (for the dtrace-generated probes.o files). However,
it raises a big stink about the non-portability, even though we don't
attempt it on platforms where it would actually fail:
CCLD libvirt_driver_qemu.la
*** Warning: Linking the shared library libvirt_driver_qemu.la against
the non-libtool
*** objects libvirt_qemu_probes.o is not portable!
This shuts libtool up by creating a proper .lo file that matches
what libtool normally expects.
* src/Makefile.am (%_probes.lo): New rule.
(libvirt_probes.stp, libvirt_qemu_probes.stp): Simplify into...
(%_probes.stp): ...shorter rule.
(CLEANFILES): Clean new .lo files.
(libvirt_la_BUILT_LIBADD, libvirt_driver_qemu_la_LIBADD)
(libvirt_lxc_LDADD, virt_aa_helper_LDADD): Link against .lo file.
* tests/Makefile.am (PROBES_O, qemu_LDADDS): Likewise.
If vdsm is installed and configured in Fedora 17, we add the following
items into qemu.conf:
spice_tls=1
spice_tls_x509_cert_dir="/etc/pki/vdsm/libvirt-spice"
However, after this changes, augtool cannot identify qemu.conf anymore.
Add a VIR_ERR_DOMAIN_LAST sentinel for virErrorDomain and
replace the virErrorDomainName function by a VIR_ENUM_IMPL
In the process the naming of error domains is sanitized
* src/util/virterror.c: Use VIR_ENUM_IMPL for converting
error domains to strings
* include/libvirt/virterror.h: Add VIR_ERR_DOMAIN_LAST
The libvirt_private.syms file exports virNetlinkEventServiceLocalPid
so there needs to be a no-op stub for Win32 to avoid linker errors
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* daemon/libvirtd.c: Set custom driver module dir if the current
binary name is 'lt-libvirtd' (indicating execution directly
from GIT checkout)
* src/driver.c, src/driver.h, src/libvirt_driver_modules.syms: Add
virDriverModuleInitialize to allow driver module location to
be changed
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When building as driver modules, it is not possible for the QEMU
driver module to reference the DTrace/SystemTAP probes linked into
the main libvirt.so. Thus we need to move the QEMU probes into a
separate file 'libvirt_qemu_probes.d'. Also rename the existing
file from 'probes.d' to 'libvirt_probes.d' while we're at it
* daemon/Makefile.am, src/internal.h: Include libvirt_probes.h
instead of probes.h
* src/Makefile.am: Add rules for libvirt_qemu_probes.d
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor_json.c,
src/qemu/qemu_monitor_text.c: Include libvirt_qemu_probes.h
* src/libvirt_probes.d: Rename from probes.d
* src/libvirt_qemu_probes.d: QEMU specific probes formerly
in probes.d
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we have drivers which depend on each other (ie QEMU/LXC
depend on the network driver APIs), we need to use RTLD_GLOBAL
instead of RTLD_LOCAL. While this pollutes the calling binary
with many more symbols, this is no worse than if we directly
link to the drivers, and this only applies to libvirtd
* src/driver.c: s/RTLD_LOCAL/RTLD_GLOBAL/
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Only libvirt_driver_storage.la links to libblkid currently. If
we are running in a scenario with driver modules, LXC must
directly link to it, since it can't assume the storage driver
is present
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The libvirt_test.la library was introduced to allow test suites
to reference internal-only symbols. These days, nearly every
symbol we care about is in src/libvirt_private.syms, so there
is no need for libvirt_test.la to continue to exist
* src/Makefile.am: Delete libvirt_test.la & add new .syms files
* src/libvirt_private.syms: Export symbols needed by test suite
* tests/Makefile.am: Link to libvirt_test.la. Ensure LXC tests link
to network_driver.la
* src/libvirt_esx.syms, src/libvirt_openvz.syms: Add exports needed
by test suite
