qemuNetworkIfaceConnect() used to have a special case for
actualType='network' (a network with forward mode of route, nat, or
isolated) to call the libvirt public API to retrieve the bridge being
used by a network. That is no longer necessary - since all network
types that use a bridge and tap device now get the bridge name stored
in the ActualNetDef, we can just always use
virDomainNetGetActualBridgeName() instead.
(an audit of the two callers to qemuNetworkIfaceConnect() confirms
that it is never called for any other type of network, so the dead
code in the else statement (logging an internal error if it is called
for any other type of network) is eliminated in the process.)
Since virNetworkFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Coverity complained that because the cfg->macFilter call checked
net->ifname != NULL before calling ebtablesRemoveForwardAllowIn, then
the virNetDevOpenvswitchRemovePort call should have the same check.
However, if I move the ebtables call prior to the check for TYPE_DIRECT
(where there is a VIR_FREE(net->ifname)), then it seems Coverity is
happy. Since firewall info is tacked on last during setup, removing
it in the opposite order of initialization seems to be natural anyway
Ethernet interfaces in libvirt currently do not support bandwidth setting.
For example, following xml file for an interface will not apply these
settings to corresponding qdiscs.
<interface type="ethernet">
<mac address="02:36:1d:18:2a:e4"/>
<model type="virtio"/>
<script path=""/>
<target dev="tap361d182a-e4"/>
<bandwidth>
<inbound average="984" peak="1024" burst="64"/>
<outbound average="2000" peak="2048" burst="128"/>
</bandwidth>
</interface>
Signed-off-by: Anirban Chakraborty <abchak@juniper.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Hotplugging and hotunplugging char devices is only supported through
'-device' and the check for device capability should be independently.
Coverity also complains about 'tmpChr->info.alias' could be NULL and we
are dereferencing it but it somehow only in this case don't recognize
that the value is set by 'qemuAssignDeviceChrAlias' so it's clearly
false positive. Add sa_assert to make coverity happy.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In qemuDomainDetachControllerDevice if the info.alias already exists
a call to qemuAssignDeviceControllerAlias would overwrite the existing
so avoid this possibility.
Prior patch removed the need for the virConnectPtr in the unplug
detach host path which caused ripple effect to remove in multiple
callers. The previous patch just left things as ATTRIBUTE_UNUSED -
this patch will remove the variable.
https://bugzilla.redhat.com/show_bug.cgi?id=1141732
Introduced by commit id '8f76ad99' the logic to detach a scsi_host
device (SCSI or iSCSI) fails when attempting to remove the 'drive'
because as I found in my investigation - the DelDevice takes care of
that for us.
The investigation turned up commits to adjust the logic for the
qemuMonitorDelDevice and qemuMonitorDriveDel processing for interfaces
(commit id '81f76598'), disk bus=VIRTIO,SCSI,USB (commit id '0635785b'),
and chr devices (commit id '55b21f9b'), but nothing with the host devices.
This commit uses the model for the previous set of changes and applies
it to the hostdev path. The call to qemuDomainDetachHostSCSIDevice will
return to qemuDomainDetachThisHostDevice handling either the audit of
the failure or the wait for the removal and then call into
qemuDomainRemoveHostDevice for the event, removal from the domain hostdev
list, and audit of the removal similar to other paths.
NOTE: For now the 'conn' param to +qemuDomainDetachHostSCSIDevice is left
as ATTRIBUTE_UNUSED. Removing requires a cascade of other changes to be
left for a future patch.
This patch adds parsing/formatting code as well as documentation for
shared memory devices. This will currently be only accessible in QEMU
using it's ivshmem device, but is designed as generic as possible to
allow future expansion for other hypervisors.
In the devices section in the domain XML users may specify:
- For shmem device using a server:
<shmem name='shmem0'>
<server path='/tmp/socket-ivshmem0'/>
<size unit='M'>32</size>
<msi vectors='32' ioeventfd='on'/>
</shmem>
- For ivshmem device not using an ivshmem server:
<shmem name='shmem1'>
<size unit='M'>32</size>
</shmem>
Most of the configuration is made optional so it also allows
specifications like:
<shmem name='shmem1/>
<shmem name='shmem2'>
<server/>
</shmem>
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Request erroring out from the backing chain traveller and drop qemu's
internal backing chain integrity tester.
The backing chain traveller reports errors by itself with possibly more
detail than qemuDiskChainCheckBroken ever could.
We also need to make sure that we reconnect to existing qemu instances
even at the cost of losing the backing chain info (this really should be
stored in the XML rather than reloaded from disk, but that needs some
work).
https://bugzilla.redhat.com/show_bug.cgi?id=1095636
When starting up the domain the domain's NICs are allocated. As of
1f24f682 (v1.0.6) we are able to use multiqueue feature on virtio
NICs. It breaks network processing into multiple queues which can be
processed in parallel by different host CPUs. The queues are, however,
created by opening /dev/net/tun several times. Unfortunately, only the
first FD in the row is labelled so when turning the multiqueue feature
on in the guest, qemu will get AVC denial. Make sure we label all the
FDs needed.
Moreover, the default label of /dev/net/tun doesn't allow
attaching a queue:
type=AVC msg=audit(1399622478.790:893): avc: denied { attach_queue }
for pid=7585 comm="qemu-kvm"
scontext=system_u:system_r:svirt_t:s0:c638,c877
tcontext=system_u:system_r:virtd_t:s0-s0:c0.c1023
tclass=tun_socket
And as suggested by SELinux maintainers, the tun FD should be labeled
as svirt_t. Therefore, we don't need to adjust any range (as done
previously by Guannan in ae368ebf) rather set the seclabel of the
domain directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Pass the source of the changed media instead of a complete disk
definition.
Note that the @disk argument now contains what @olddisk would contain.
The new source is passed as a virStorageSource struct.
When we are changing media (or doing other hotplug operations) we need
to setup cgroups, locking and seclabels on the new disk. This is a
multi-step process where every piece can fail. To simplify dealing with
this introduce qemuDomainPrepareDisk that similarly to
qemuDomainPrepareDiskChainElement initializes/tears down a whole new
disk to be used with the domain.
Additionally the function supports passing a different source struct for
media changes of cdroms that will be refactored later.
Currently, qemu driver uses qemuTranslateDiskSourcePool()
to translate disk volume information. This function is
general enough and could be used for other drivers as well,
so move it to conf/domain_conf.c along with its helpers.
- qemuTranslateDiskSourcePool: move to storage/storage_driver.c
and rename to virStorageTranslateDiskSourcePool,
- qemuAddISCSIPoolSourceHost: move to storage/storage_driver.c
and rename to virStorageAddISCSIPoolSourceHost,
- qemuTranslateDiskSourcePoolAuth: move to storage/storage_driver.c
and rename to virStorageTranslateDiskSourcePoolAuth,
- Update users of qemuTranslateDiskSourcePool to use a
new name.
During a QEMU live migration several warning messages about job
handling could be written to syslog on the destination host:
"entering monitor without asking for a nested job is dangerous"
The messages are written because the job handling during migration
uses hard coded asyncJob values in several places that are incorrect.
This patch passes the required asyncJob value around and prevents
the warnings as well as any issues that the warnings may be referring
to.
https://bugzilla.redhat.com/show_bug.cgi?id=1130089
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Otherwise this beautiful error would be overwritten when
the function is called with a really high rate number:
2014-07-28 12:51:47.920+0000: 2304: error : virCommandWait:2399 :
internal error: Child process (/sbin/tc class add dev vnet0 parent 1:
classid 1:1 htb rate 4294968kbps) unexpected exit status 1: Illegal "rate"
Usage: ... qdisc add ... htb [default N] [r2q N]
default minor id of class to which unclassified packets are sent {0}
r2q DRR quantums are computed as rate in Bps/r2q {10}
debug string of 16 numbers each 0-3 {0}
... class add ... htb rate R1 [burst B1] [mpu B] [overhead O]
[prio P] [slot S] [pslot PS]
[ceil R2] [cburst B2] [mtu MTU] [quantum Q]
rate rate allocated to this class (class can still borrow)
burst max bytes burst which can be accumulated during idle period {computed}
mpu minimum packet size used in rate computations
overhead per-packet size overhead used in rate computations
linklay adapting to a linklayer e.g. atm
ceil definite upper class rate (no borrows) {rate}
cburst burst but for ceil {computed}
mtu max packet size we create rate map for {1600}
prio priority of leaf; lowe
https://bugzilla.redhat.com/show_bug.cgi?id=1043735
Create the structures and API's to hold and manage the iSCSI host device.
This extends the 'scsi_host' definitions added in commit id '5c811dce'.
A future patch will add the XML parsing, but that code requires some
infrastructure to be in place first in order to handle the differences
between a 'scsi_host' and an 'iSCSI host' device.
Split virDomainHostdevSubsysSCSI further. In preparation for having
either SCSI or iSCSI data, create a union in virDomainHostdevSubsysSCSI
to contain just a virDomainHostdevSubsysSCSIHost to describe the
'scsi_host' host device
I'm going to add functions that will deal with individual image files
rather than whole disks. Rename the security function to make room for
the new one.
As we are doing with the enum structures, a cleanup in "src/qemu/"
directory was done now. All the enums that were defined in the
header files were converted to typedefs in this directory. This
patch includes all the adjustments to remove conflicts when you do
this kind of change. "Enum-to-typedef"'s conversions were made in
"src/qemu/qemu_{capabilities, domain, migration, hotplug}.h".
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
I'm going to add functions that will deal with individual image files
rather than whole disks. Rename the security function to make room for
the new one.
A future patch will add two-phase block commit jobs; as the
mechanism for managing them is similar to managing a block copy
job, existing errors should be made generic enough to occur
for either job type.
* src/conf/domain_conf.c (virDomainHasDiskMirror): Update
comment.
* src/qemu/qemu_driver.c (qemuDomainDefineXML)
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainBlockJobImpl, qemuDomainBlockCopy): Update error
message.
* src/qemu/qemu_hotplug.c (qemuDomainDetachDiskDevice): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Some of the APIs already return int since they can produce errors that
need to be propagated. For consistency reasons, this patch changes the
rest of the APIs to also return int even though they do not fail or
report any errors.
In general, we should only remove a backend after seeing DEVICE_DELETED
event for a corresponding frontend.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In general, we should only remove a backend after seeing DEVICE_DELETED
event for a corresponding frontend. This doesn't make any difference for
disks attached using -drive or drive_add since QEMU automatically
removes their backends but it's still better to make our code
consistent. And it may start making difference in case we switch to
attaching disks using -blockdev.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
[1] reported that we are removing network's backend too early. I didn't
really get the reproducer but libvirt behaves strangely when a guest
does not confirm the removal, e.g., it does not support PCI hotplug. In
such case, detaching a network device leaves its frontend in place but
removes the backend, which makes the device unusable for the guest.
Moreover attaching the same device again succeeds and both the guest and
libvirt will see two network interfaces attached but only one of them is
actually working.
I checked with Paolo Bonzini and he confirmed we should only remove a
backend after seeing DEVICE_DELETED event for a corresponding frontend.
[1] https://www.redhat.com/archives/libvir-list/2014-March/msg01740.html
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In "src/conf/domain_conf.h" there are many enum declarations. The
cleanup in this header filer was started, but it wasn't enough and
there are many other files that has enum variables declared. So, the
commit was starting to be big. This commit finish the cleanup in this
header file and in other files that has enum variables, parameters,
or functions declared.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In "src/conf/domain_conf.h" there are many enumerations (enum)
declarations to be converted as a typedef too. As mentioned before,
it's better to use a typedef for variable types, function types and
other usages. I think this file has most of those enum declarations
at "src/conf/". So, me and Eric Blake plan to keep the cleanups all
over the source code. This time, most of the files changed in this
commit are related to part of one file: "src/conf/domain_conf.h".
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
